Hi,
i have my Mi A3 since less than a month.
Yesterday i wantes to reboot it and now it doesn´t start anymore. I have tryed to push the start-button, push it together with the volume-down button an together with the volume-up-button. Nothing works. The is no vibrating like it does normaly when it starts.
The notification-LED does nothing if i try to charge the Phone. I have tryed to connect it to a PC. The PC doesn´t detect the connectet phone.
There was no Problem before. The phone hasn´t fallen, and had no contact to water, or something like that. I have no idea whats the problem.
What should i do?
I live in Germany and have buyed the phone at the chinese online-shop banggood.com . I don´t know whats about warranty.
Warranty on banggood
https://www.banggood.com/Return-policy_hl103_at529
Related
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
Hi guys,
I have a problem with my x10 mini pro. There are some similar posts here but nobody exactly describe what is happening to me. So my problem:
One day i have been in subway, phone working properly everything fine. THan suddenly 3G icon has disappear and wouldnt go back. So i decided to restart the device. But since i turned it off, i cannot turn it back on again...
I have tried to take out the simcard, take out mempory card, multiple time reflash by SEUS but still cannot turn it on.
I cna charge the phone with no problem, i can flash it with no problem, but i cannot use it at all.
When i press power button, phone shortly vibrate as he is turning on, than display get a bit brighter (not white, just lights up its easy to notice from profile). and than after few seconds get black again. And like this it continue until it drains battery, only without vibrating. every cca 5 seconds display light up and than get black again. So i guess its rebooting all the time. I have tried all tricks like pressing power+home button, still nothing.
I think i just need really wipe out the whole phone and flash it again. Is it possible somehow? I feel like reflashing by SEUS is not real hardcore flash, is there anything stronger i can try?
I am willing to try anything if anybody has an idea, since its not working anyway so i dont care what i try.
Thanks for advices !
try binary's flash tool, it helps every out. use it in the same way you would SEUS
http://forum.xda-developers.com/showthread.php?t=826455
Dan53 said:
try binary's flash tool, it helps every out. use it in the same way you would SEUS
http://forum.xda-developers.com/showthread.php?t=826455
Click to expand...
Click to collapse
I try this already... Still the same
Try to flash 1.6 back.
I had the same problem, didnt ever find a way to fix it so had it replaced under warrenty. may be your only way on this problem im afraid.
I tried 1.6 - didnt work
Problem is that i have no warranty.... I just gave it to my friend who is going to singapore, she knows some official SE shop, so maybe i will get it fixed, but im not sure if it wont be for the same money as new phone...
Well the phone is under a year old so it will be covererd under se warranty unless they think you broke there warranty in any way. I would flash it back to your original FW before having it looked at and wipe your sd card.
I bought it in chinese market (Its not a copy) without any receipt or anything, I dont think so they will took it as a warranty. I have done all of this. Flashed to my original FW, wiped everything, nothing works...
did u try SEUS ?
is your phone getting detected via SEUS in flash mode ? what happens when :
1. Take off the battery for 30 secs
2. connect the phone to usb
3. Power on the phone with back button pressed.
if SEUS detects u should be able to flash it. The flash tool also should be working.
Hi there,
this is my 1st post so i hope to be a lucky one...
I installed minicm7 on my phone and everything was ok untill the 1st reboot.
Phone asked me for " Sim unlock network code " or something like that
so i restored my backup and started to use utilities
to unlock bootloader and other staff...
I was so " busy " that i didnt notice that my battery is out of battery
and my phone powered off in the middle of the process.
I cant turn it on now, i cant charge it, pc dont recognise it ( pc companion to ) and power button + menu, or back button etc dont work...
I charged my battery in a phone store, hoping that i could do something
but my phone is dead... it dosent response and i m afraid tha i damaged it.
Any idea / advice ?
ps. Sorry for my english, i hope that i made myself clear enough
ps2. I read similar threads but they didnt helped me at all
I havent managed to turn it on yet...
Any help plz ?
ps. If i send it at sony-ericcson store
will they charge me or warranty applies ?
If your phone doesn't even go into flash-mode there's not much you can do yourself
And I think they will notice you messed with it (rooted, unlocking bootloader), so they will charge you, I suppose
Isnt there anything at all tha i could do
before i send it for service ?
If you can't get it into flashmode, no, nothing at all
ok, thanx
i ll send it when i ll get paid...
unfortunatelly i ll have to wait for 1 more week
Good luck
If the reboot not work, just try it again and again.
if it still doesnt work, just try to flash it again.
I believe, normally the Android will not dead.
Do u try instal SEUS and restore orginal android
Here's the situation:
My sister did something bad about her phone(x10 mini pro).
It has a newly installed stock rom (the phone used to have cyanogen but she told me to revert it back to stock).
She told me that all she did was install SonyEricsson Xperia Flasher on her machine and used it to flash her x10 mini pro. The flasher tells her that it is succesfull but when she turned off her phone for a restart, the phone does not turn on anymore. I have tried charging the battery overnight as well as using a different working battery but it does not help. Pressing the power button does nothing. No led light, no vibration, nothing. I have also tried different button combo(tried almost any combination) found here in forums but it does nothing as well.
I bought this device to a tech guy which is in a mall and he is charging me Is there something else I can do to fix thing device without spending? Is there another way other than unbrickin it with JTAG?
Any help or suggestion would be greatly appreciated.
Edit:
SEUS does not help because the phone cannot be detected when plugged in because it doesnt turn on and yes, I tried using a different usb cable.
I think my sister flashed the wrong kernel.
Does the battery charge (green LED)?
Do you know someone with the same phone? Try his/her battery. I had this problem too once, it would not turn on or anything, untill i tried to insert another battery. Then it started up and all. After clear battery stats, it worked again with my own battery.
This gives me the assumption, that is has something to do with battery stat (doh') - therefore all guides about doing a SEUS or other stock flash, should also instruct users to do a clear battery stat before the stock-flash.
Any one correct me on this if i'm totally wrong
gonix said:
Here's the situation:
My sister did something bad about her phone(x10 mini pro).
It has a newly installed stock rom (the phone used to have cyanogen but she told me to revert it back to stock).
She told me that all she did was install SonyEricsson Xperia Flasher on her machine and used it to flash her x10 mini pro. The flasher tells her that it is succesfull but when she turned off her phone for a restart, the phone does not turn on anymore. I have tried charging the battery overnight as well as using a different working battery but it does not help. Pressing the power button does nothing. No led light, no vibration, nothing. I have also tried different button combo(tried almost any combination) found here in forums but it does nothing as well.
I bought this device to a tech guy which is in a mall and he is charging me Is there something else I can do to fix thing device without spending? Is there another way other than unbrickin it with JTAG?
Any help or suggestion would be greatly appreciated.
Edit:
SEUS does not help because the phone cannot be detected when plugged in because it doesnt turn on and yes, I tried using a different usb cable.
I think my sister flashed the wrong kernel.
Click to expand...
Click to collapse
The Experia Flasher is not for the 2010 devices i think, so she may well have flashed the wrong firmware. SUS doesn't need to detect the phone, if you choose update and it can't recognise the phone it offers a repair option, this lets you choose the model yourself, it will download the proper firmware and all you have to do is connect your phone in flash-mode (ie hold the back-button while you plug in the usb-cable).
But she may well have bricked it properly and in that case, JTagging it is the only option to get it back up and working.
Screen-shots are from the old PC Companion, byt they still looks very much like them in the new version
http://forum.xda-developers.com/showpost.php?p=17458289&postcount=8
Emperor.dk said:
Does the battery charge (green LED)?
Do you know someone with the same phone? Try his/her battery. I had this problem too once, it would not turn on or anything, untill i tried to insert another battery. Then it started up and all. After clear battery stats, it worked again with my own battery.
This gives me the assumption, that is has something to do with battery stat (doh') - therefore all guides about doing a SEUS or other stock flash, should also instruct users to do a clear battery stat before the stock-flash.
Any one correct me on this if i'm totally wrong
Click to expand...
Click to collapse
Oh I know someone who has the same x10 with me. I guess Ill have to try your suggestion.
SmG67 said:
The Experia Flasher is not for the 2010 devices i think, so she may well have flashed the wrong firmware. SUS doesn't need to detect the phone, if you choose update and it can't recognise the phone it offers a repair option, this lets you choose the model yourself, it will download the proper firmware and all you have to do is connect your phone in flash-mode (ie hold the back-button while you plug in the usb-cable).
But she may well have bricked it properly and in that case, JTagging it is the only option to get it back up and working.
Click to expand...
Click to collapse
It doesnt help because when Im in the part where it says, press the back button while inserting the usb, the phone cannot be detected and so the update cannot continue.
Hi guys, I'm new here, so I'm sorry if I'm not doing this properly.
I have Alcatel Flash 2 phone (7049D) and I accidentally hard-bricked it while trying to root my phone. I used this tool called "Smart Phone Flash Tool". I turned my phone off,press the Download button on the software,and then I press Power+Volume Up button on my phone,the Download process on the software showed 64% completion but then it showed Error Message (can't remember what it is), and after that I can't turn my phone on however I tried. I already tried pressing every button for a while (ex : Power button, Power+Volume Up button, etc), still not working. And when I connect it to my laptop, somehow my laptop also can't recognize it,it makes the sound that it connects but it says "Unknown device" on Device Manager with yellow exclamation mark on it. Can anyone please tell me how to fix it? I read some articles that this kind of situation might be the end for my phone,but I just hope that there might still a chance for me to fix it. Hope someone can help me, thx a lot.
You made a hard-brick, let some expert come and answer to your question, For now your phone is in HARD-BRICK and you cannot do anything to it simple.
Salman Al-Badgail said:
You made a hard-brick, let some expert come and answer to your question, For now your phone is in HARD-BRICK and you cannot do anything to it simple.
Click to expand...
Click to collapse
So,my point is,is there any possibility that a hard-brick is repairable? Because I've been going left and right, calling many repair shops, and none of them can repair my phone, simply because it's new, not many people have Alcatel Flash 2. I will in the end bring my phone to Alcatel Service Center of course if there's no other solution, but I'm holding it as a last resort since it's gonna cost more.
The phone cost is around (USD-$132 . 58), go to the service centre they might help you on this,
i have the same problem......just this morning i accidentally installed incompatible rom on my flash 2 and now it wont open ....... my laptop will detect it for about 3 seconds and then nothing........
[email protected] said:
i have the same problem......just this morning i accidentally installed incompatible rom on my flash 2 and now it wont open ....... my laptop will detect it for about 3 seconds and then nothing........
Click to expand...
Click to collapse
Did you solved the problem?