[Solved]EdXposed bootloop on Android 10 Havoc - Xiaomi Redmi Note 4 Questions & Answers

I'm trying to flash edxposed via magisk, but it gives me a bootloop to fastboot after flashing. I had to delete data/adb/magisk/riru edxposed folder to clear it. Any solution? I tried both Yafa and Sandhook variants, and both bootloop.
Edit: Solved by downloading the latest Edxposed 0.4.6.0 zip from the official site rather via magisk.

kenturky said:
I'm trying to flash edxposed via magisk, but it gives me a bootloop to fastboot after flashing. I had to delete data/adb/magisk/riru edxposed folder to clear it. Any solution? I tried both Yafa and Sandhook variants, and both bootloop.
Click to expand...
Click to collapse
Which version?
You need v0.4.5.5 or higher to avoid bootloops on Android 10!

Hirs_E_Fruit said:
Which version?
You need v0.4.5.5 or higher to avoid bootloops on Android 10!
Click to expand...
Click to collapse
Oh wow. In the Magisk downloads section, both have 4.5.1. Thanks. I'll search for 4.5.5 version.

kenturky said:
Oh wow. In the Magisk downloads section, both have 4.5.1. Thanks. I'll search for 4.5.5 version.
Click to expand...
Click to collapse
Here you go!

Hirs_E_Fruit said:
Which version?
You need v0.4.5.5 or higher to avoid bootloops on Android 10!
Click to expand...
Click to collapse
Thanks, the latest available was 0.4.6.0 beta, and now it works flawlessly.

kenturky said:
Thanks, the latest available was 0.4.6.0 beta, and now it works flawlessly.
Click to expand...
Click to collapse
Okay, there just some Xposed Moduels who dont work with 0.4.6.0 so I have to stay on 0.4.5.5

Hirs_E_Fruit said:
Okay, there just some Xposed Moduels who dont work with 0.4.6.0 so I have to stay on 0.4.5.5
Click to expand...
Click to collapse
Could you suggest any xposed mod for one hand mode on pie or q.

Related

Working xposed version

Hi guys, I'm trying to install xposed but using the latest version doesn't seem to work. It successfully installs in recovery but then, once in Android, it says it's not yet compatible. I've seen lot of you have installed and managed to have it working. Could you please tell me which version you used? And how you installed it. Thanks
What ROM are u on?
http://bit.ly/2b6tR8R
Check out this post
Pphish20 said:
What ROM are u on?
Click to expand...
Click to collapse
Rooted stock 10d
[email protected] said:
http://bit.ly/2b6tR8R
Check out this post
Click to expand...
Click to collapse
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
SpH1nX said:
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
Click to expand...
Click to collapse
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
gwolfu said:
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
Click to expand...
Click to collapse
rovo89 officially stated that the next version will be systemless
Regarding installer, have I to mandatory use material design version or I can stay with the official one? Is it compatible?
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
danroger said:
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
Click to expand...
Click to collapse
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
SpH1nX said:
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
Click to expand...
Click to collapse
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
gwolfu said:
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Click to expand...
Click to collapse
Official zip with material design version? Does it work?
SpH1nX said:
Official zip with material design version? Does it work?
Click to expand...
Click to collapse
using it since more then half a year already, so rest assures it's working
check thread I submitted for more info in case of doubts
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
[email protected] said:
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
SpH1nX said:
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
Click to expand...
Click to collapse
Just try it
A friend of mine also ran into some issues like yours on the official app but as with your case he tried the material one and worked wonders
Also if you run the material version you are also as close to stock as possible since this is compiled from official sources but only a few visual changes made to the app
Dont work at mine H850
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
Could you please tell framework and installer versions?
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
gwolfu said:
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
Click to expand...
Click to collapse
Done. Get System UI Force Close every Time.
SpH1nX said:
Could you please tell framework and installer versions?
Click to expand...
Click to collapse
Latest Material Installer and Systemless v86.3 and v86.4.
Tried official v86 too
I can confirm that official framework works fine with material design installer. That's the only combination that's working on my G5. Haven't tried systemless version.

[MAGISK][X720][X727] How to Pass Safetynet Check

I have long sought a way to pass the safetynet. Finally I found a solution. I found a project made for Xiaomi Mi5 and i have ported it on Leeco Le Pro3.
Original Project by @coronafire : https://forum.xda-developers.com/mi-5/how-to/mi-5-passing-safetynet-unlocked-t3557845
Actually i have made the mod only for Le Max 2 and Le Pro 3. I have tested only on Le Max 2, because i have no Leeco device in this moment and I someone have test it on Le Pro 3 with succes ( ZIP4). This mod will not work if you have xposed on your phone.
I have built a github project and if you want you can add more Leeco device.
Github Project: https://github.com/mauronofrio/magisk-leeco-safetynet-props/tree/master
What this mod do?
- This mod set some props and enable magisk hide (If you don't enable magisk hide your phone can't pass Safetynet check). This mod will survive future updates and in general it will survive if you don't make a wipe data.
How to install:
You need to have already installed magisk on your phone. You can find it on official thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Magisk direct link: http://tiny.cc/latestmagisk
Just download the zip and flash it in TWRP
DOWNLOAD
Safetynet Pass for Le Pro 3 (Zip 4) MEGA
Safetynet Pass for Le Pro 3 (Zip 4) AFH
If you test it please comment and/or give me a feedback
Sorry for a dumb question, but I assume you need to install magisk first?
Sent from my LEX727 using XDA Labs
llblwskydrgn said:
Sorry for a dumb question, but I assume you need to install magisk first?
Sent from my LEX727 using XDA Labs
Click to expand...
Click to collapse
Yes, i forget to write it
I'm on AICP, which have default Magisk. Downloaded lastest version from Play Store. On settings of Magisk I have "Magisk Hide", which make "SafetyNet Correct".
marik1 said:
I'm on AICP, which have default Magisk. Downloaded lastest version from Play Store. On settings of Magisk I have "Magisk Hide", which make "SafetyNet Correct".
Click to expand...
Click to collapse
Yes but on rom stock based you need of this zip to pass safetynet check
Does this also work on Lineage OS?
Moritz Bayerl said:
Does this also work on Lineage OS?
Click to expand...
Click to collapse
Yes
First of all thank you very much. I'll try that in a second.
---------- Post added at 10:50 AM ---------- Previous post was at 10:44 AM ----------
Alright so I just installed it but still the cts profile check fails.
I guess I'll need another kernel.
mauronofrio said:
Yes
Click to expand...
Click to collapse
Does it mean I can use Android Pay with LineageOS?
sweetboy02125 said:
Does it mean I can use Android Pay with LineageOS?
Click to expand...
Click to collapse
Yes
Sadly it just don't work for me. Any ideas?
Moritz Bayerl said:
Sadly it just don't work for me. Any ideas?
Click to expand...
Click to collapse
What rom do you have? Do you have magisk installed? Do you have xposed installed?
Magisk installed on lineage os 7.1.2 and no xposed
Moritz Bayerl said:
Magisk installed on lineage os 7.1.1 and no xposed
Click to expand...
Click to collapse
I don't know why.
It says that cts profile would not match
Moritz Bayerl said:
It says that cts profile would not match
Click to expand...
Click to collapse
MMM but you have only magisk on your phone or you also have superuser? If you have both is normale that you have cts mismatch
mauronofrio said:
Yes
Click to expand...
Click to collapse
Do you think it will stay if I update LineageOS weekly or I have to flash this every times LineageOS update?
sweetboy02125 said:
Do you think it will stay if I update LineageOS weekly or I have to flash this every times LineageOS update?
Click to expand...
Click to collapse
This is a permanent fix. You will lose it only if you make a wipe data or unistall magisk
sweetboy02125 said:
Do you think it will stay if I update LineageOS weekly or I have to flash this every times LineageOS update?
Click to expand...
Click to collapse
Tell me if you try this mod and if it works
Moritz Bayerl said:
It says that cts profile would not match
Click to expand...
Click to collapse
I have made another zip, try this: https://mega.nz/#!cA1TUBQb!5vDJKFjPq3lTVqFZxopHGc-YWWoJzW4KhSZjPiIsnFg

XPosed

For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
N1ghtr08d said:
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
Click to expand...
Click to collapse
I actually only use a package for greenify and a "Eventlock" module to get my calendar data on the lockscreen
Yeah, that's the problem for me. Xposed used to be about to do so much that Android couldn't but the OS has come so far now that I don't feel the need for it anymore.
Sent from my G8341 using Tapatalk
Yeeea.....bur I just had to check it out when I saw there is a beta version of Xposed for Oreo.
Just because I'm curious
I know, I feel the same way but just didn't see the benefit of it at the time. I used to love Xposed. I actually forgoe certain upgrades because I would lose Xposed in the past. Those days are gone now though.
For all who are intrested:
Gravity Box for Oreo is now released!
I think the best XPosed Modul on the Repository!
pergoteborg said:
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
Click to expand...
Click to collapse
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
pepe_k said:
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
Click to expand...
Click to collapse
Same here... It's sad to see there is nothing to do but waiting
TurkO546 said:
Same here... It's sad to see there is nothing to do but waiting
Click to expand...
Click to collapse
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Thanks for the report. If you know about a fix when it's available, please share the info.
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Yes @rovo89 Please help!
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "Statusbar Download Progress" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
snake218 said:
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
Click to expand...
Click to collapse
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
I'll try this tutorial, i'll give feedback later, thanks
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
monsieurlezard said:
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
Click to expand...
Click to collapse
Pls gimme a downlaod link of beta 2 can't find it on internet.
pw1nce said:
Pls gimme a downlaod link of beta 2 can't find it on internet.
Click to expand...
Click to collapse
https://dl-xda.xposed.info/framework/sdk26/arm64/
TurkO546 said:
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
Click to expand...
Click to collapse
Beta 2 activated but when i install a mod my device going to bootloop

Google Tez app won't work

I'm running official RR 8.1 ROM with FK. Upon registration I get an error from Tez app (Custom Rom and root). I used magisk hide, tried clearing data, it's still the same. Any ideas? Magisk version is 16.0
THEALLSTAR said:
I'm running official RR 8.1 ROM with FK. Upon registration I get an error from Tez app (Custom Rom and root). I used magisk hide, tried clearing data, it's still the same. Any ideas? Magisk version is 16.0
Click to expand...
Click to collapse
What about before flashing FK
That's strange, magisk should have prevented that. It works for me
jawahar.T said:
What about before flashing FK
Click to expand...
Click to collapse
AFAIK, It worked on older version of FK.
Edit: No, it doesn't.
THEALLSTAR said:
AFAIK, It worked on older version of FK.
Click to expand...
Click to collapse
....
Thanks for the confirmation ...I was just going to Flash FK...
.....
What about CTS profile?? In magisk
jawahar.T said:
....
Thanks for the confirmation ...I was just going to Flash FK...
.....
What about CTS profile?? In magisk
Click to expand...
Click to collapse
I don't think there's any problem with FK. I flashed the older version of FK on which it worked. The problem is still there.
THEALLSTAR said:
I don't think there's any problem with FK. I flashed the older version of FK on which it worked. The problem is still there.
Click to expand...
Click to collapse
....
CTS profile??
jawahar.T said:
....
CTS profile??
Click to expand...
Click to collapse
True
THEALLSTAR said:
True
Click to expand...
Click to collapse
That's weird...try magisk hide to the tez app .....if tried reflash your ROM
jawahar.T said:
That's weird...try magisk hide to the tez app .....if tried reflash your ROM
Click to expand...
Click to collapse
Reflashing helped
THEALLSTAR said:
Reflashing helped
Click to expand...
Click to collapse
...
Way to go :good:
jawahar.T said:
...
Way to go :good:
Click to expand...
Click to collapse
For me still same....I changed from DOT to AEX....
vedhavyga said:
For me still same....I changed from DOT to AEX....
Click to expand...
Click to collapse
Did you clean flash the ROM??
jawahar.T said:
Did you clean flash the ROM??
Click to expand...
Click to collapse
Yes...but not wiped internal storage....will do it in next switch...
Try this version of Magisk: https://forum.xda-developers.com/showpost.php?p=76148659&postcount=3996
I'm tempted to try the regular custom Magisk 16.0 again, but I don't want to risk root detection again. 16.0 wasn't working for me when I tried it.

Remove Google Gapps from OOS?

Ok as the title says I am curious if there is any way to remove all google services and apps from the one plus 7t pro running the current 10.0.13 software.
I have Magisk so it is rooted.
New Optimus said:
Ok as the title says I am curious if there is any way to remove all google services and apps from the one plus 7t pro running the current 10.0.13 software.
I have Magisk so it is rooted.
Click to expand...
Click to collapse
The only "debloat" I'm aware of for 7T Pro is xXx NoLimits
"Debloater" magisk module
FSadino said:
"Debloater" magisk module
Click to expand...
Click to collapse
FSadino said:
"Debloater" magisk module
Click to expand...
Click to collapse
I'm guessing it was updated to work with A10? Last I tried (summer 2020), it wasn't working.
Hw4ng3r said:
I'm guessing it was updated to work with A10? Last I tried (summer 2020), it wasn't working.
Click to expand...
Click to collapse
Yes, I used it on stock OOS. Make sure you install busybox too.

Categories

Resources