This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
Hi' all.
I use very often 2 Wifi networks. (Home & Work)
The problem is, the home network is configured so that a new ip is assigned each time i connect.
The work network is configured to use a static ip.
How can i configure the phone (Galaxy S II) so that i can access both networks without having to change all settings each time i connect to a different network?
Btw, i know all the parameters to configure each one correctly, i just can't make the phone remember the setting i want for each specific network.
estreito said:
Hi' all.
I use very often 2 Wifi networks. (Home & Work)
The problem is, the home network is configured so that a new ip is assigned each time i connect.
The work network is configured to use a static ip.
How can i configure the phone (Galaxy S II) so that i can access both networks without having to change all settings each time i connect to a different network?
Btw, i know all the parameters to configure each one correctly, i just can't make the phone remember the setting i want for each specific network.
Click to expand...
Click to collapse
buy a cheap router for your work's network
Tadaaaaa !!
http://www.askabouthugo.com/mobile-...ultiple-wifi-networks-with-static-ip-address/
vanvn297 said:
buy a cheap router for your work's network
Click to expand...
Click to collapse
Thanks for your response, but that's not really a solution for my case. I am new to the Android scene, so i thought i was being ignorant, but i realise that's not the case. Really odd android doesn't have the option for profiling wifi's. Nokia have it since they came with wifi conectivity.
estreito said:
Thanks for your response, but that's not really a solution for my case. I am new to the Android scene, so i thought i was being ignorant, but i realise that's not the case. Really odd android doesn't have the option for profiling wifi's. Nokia have it since they came with wifi conectivity.
Click to expand...
Click to collapse
Missed my post? Cause that's exactly what you're looking for and it's free..
What could be the issue?
My laptop and phone works just fine with this WiFi connection, so doubt it's the router.
The View's been working fine for the past couple months... could it all of a sudden break?
Im having the same problem since upgrading to hc....
Sent from my HTC_Flyer_P512_NA using XDA App
Go to the wi-fi settings on the flyer, and set the IP adress to static, will probably resolve the problem
Where would I find that "static" option? Im not seeing it?
Manudroid said:
Go to the wi-fi settings on the flyer, and set the IP adress to static, will probably resolve the problem
Click to expand...
Click to collapse
I have honeycomb, and I do not see that option (even in advanced).
I tried activating DLNA; let's see if that helps...
Go into your wi-fi settings, long press the name of the network. Now you will have the option to modify the network settings. The onscreen keyboard will pop-up, then press 'back' to hide the keyboard again. When you scroll down now, you will see an option to set the IP to static.
Manudroid said:
Go into your wi-fi settings, long press the name of the network. Now you will have the option to modify the network settings. The onscreen keyboard will pop-up, then press 'back' to hide the keyboard again. When you scroll down now, you will see an option to set the IP to static.
Click to expand...
Click to collapse
That worked... so far.
I have no idea why... my IP is dynamic (I don't pay extra for static) >.>.
In addition to it suddenly not working recently when it was working fine before... Oh well.
There's a big long thread on why this happens on a lot of Android devices, in this forum do a search. The real answer is not static IPs although that may work on networks you control if you don't have a DHCP IP conflict, it won't work on other networks, for instance your work or starbucs, etc.
The answer for your home network is change your router settings so the IP lease is NOT forever, but expires every 2 weeks or some finite time-frame.
I've had lots of problems with this on different roms, and each time a static ip didn't make any difference
A couple of days ago I set my wireless router to max 802.1g (instead of n), and seems much better so far. No other devices ever had problems with my router, so could it be that flyer doesn't like n?
Sent from my HTC Flyer P510e using xda premium
OK so work have blocked several of us from connecting our phones to wifi. Now we have a router her but can not access it so image they blocked at the main offices where they manage the network. Their are several houses that have their own routers etc but connected to the same network if that makes sense.
So my question is first how would they block us and second how can we bypass it?
Sent from my GT-I9100 using Tapatalk 2
Several ways to block access to a wifi routers.
Ways to access the network would be bring your own from home,and plug it in to the network.
To many ways to block you out to know what they have done.
Sent from my HTC Wildfire S A510e using XDA
Probably two reasons why they did this -
1) Prevent rogue devices connecting to their network, i.e. devices they cannot control what is on them and therefore could introduce viruses into the network or allows others to hack in and steal data etc.
2) Prevent people connecting personal devices for personal use, downloading files, facebook etc. Using company time and resources for unproductive personal tasks.
Probably easiest to ask them why and to ease the restrictions.
On the how:
You can control what connects to what on a very fine level - by device, by what it does and who it can talk to.
Ye I understand why. They blocked us as their network is really slow and rubbish but when we do nights and no one is using it its nice to be able to connect as no signal their. Just wondered if their was a way to get around it. They seem to have blocked all phones that were connected but one that was has been able to reconnect which is a blackberry.
Sent from my GT-I9100 using Tapatalk 2
How to by pass works blocking phone 2 options
By pass I've discovered! May not work for all
WARNING TRY AT YOUR OWN RISK!!
#1 way I've discovered (in my office)
(Other wise try bring your own wifi router and setting the ssid to company's name )
If you have a pc or Mac computer and plug Incoming Ethernet port into LAN port not WAN then from 1-4 LAN port into pc/Mac Ethernet )
Try hiding your wifi router either in tower box or in desk try to be not so obvious leaving cables everywhere , don't just leave out in the open for everyone to see..
What I did
(I've hide the router in the under my desk using 3M double sided tape and tucked the cables away so there not hanging down)
#2 way ( works anywhere you can get a wifi signal)
My. Discovered by pass :
I got a wifi repeater/ range extender
I've programmed it to my work network with their ssid and password
Then
On the repeater / extender
Your new Access Point
I used the same ssid but used a different password
(At this point you have created your own AP , which logins to your network wifi and then
Now
When I go home I just unplug my repeater and lock it up in my desk
Good luck Jason
Ps: option #1. if you need more help try YouTube if your confused what to do with wifi router
SEARCH "using old router as a wifi extender (or as second AP)
My boss already block ssid wifi for usage at handphone, only laptop can connect that wifi. How i can connect wifi via my handphone? Currently i use i phone 6s.
Any trip for unblock for connect to my phone?
What kills me about my situation is some dumb ass did streaming video one day and ran up like XXXX gb of data so naturally they started giving a damn about who was doing what... I got banned/blocked even though I've never streamed... I'm assuming I'm blocked... got the right password and my old phone said authentication failed. My new phone it doesn't say or haven't found where it says yet... I can't bring in my own connection as I don't have a office of my own and the building is too big and metal for the mobile signal to make it to my location...
edit: According to my idiot boss they're getting strict I guess and just blocking most stuff... ?
"How did you happen to do such thing - and on your last day at the job..."
I've noticed that whenever my wifi is on, and also the "always scanning" option is on - my phone suddenly connects to a network called "0x".
It doesn't really work - there is no internet. It happened in different places, inside and outside my country.
Does anybody know what it is?
UP
Old post, but happened something similar to me. Sometimes when I have just connected to my wifi network and I look on the menu it displays "0x". Your phone was probably connected to a public wifi or just bugged.
Still doesn't explain it though
In my understanding, the 0x is a garbage SSID that indicates that WIFI configuration data is obsolete.
Ite wonderful if u ask me ☺?
I booked a hotel room and when i arrived thr...my device got connected to Ox wifi and it has over 2Mbps speed...so i was curious about this Ox wifi hotspot so i searched on google and i found ur post and now i am more curios about it. What the hell is going on lol...
.
In my opinion it may have some connection with rooted devices bcz my device is rooted and i have samsung s8 as well and it neither finds this Ox wifi nor gets automatically connected☺:fingers-crossed:
Edit: As far as I see, it might a bug of Android with special cases of bad connection. Like it connects somehow, but can't get SSID. Turning on "avoid poor wifi" seems to fix it.
Same here. I've saved two wifi connections: one is my home network, other one is a network of free wifi transmiters offered by my ISP (UPC Wi-Free). My phone is Motorola Moto G with Android 5.1. It's not rooted and never has been.
I live around elder people and there were no strangers so I doubt some grandma suddenly established malicious network. Probably a bug, but the bug of what? Android? Some external software? I use Nova Launcher and Wigle Wi-fi. Do you?
0x seems to be prefix of hexadecimal numbers, but it doesn't make much sense. It wouldn't mean "hexadecimal zero" (which would be 0x0), but "hexadecimal nothing".
danagu said:
I've noticed that whenever my wifi is on, and also the "always scanning" option is on - my phone suddenly connects to a network called "0x".
It doesn't really work - there is no internet. It happened in different places, inside and outside my country.
Does anybody know what it is?
Click to expand...
Click to collapse
I've seen it too, then the actual SSID of my home network appears. Maybe Android shows '0x' when it doesn't know the name of the network it's on.