Hi everyone this is a 99% Deodexed an tweaked Rom I built from the latest firmware for the Galaxy J727P hope you all like it ! This Rom should be flashed after flashing the latest firmware J727PVPS6BSK1 !
1 Install twrp
https://mega.nz/#!DBMGCKII!lLUWZ3Wn8cTNKamTa1CQg1cj98ebT3uzpKt2PhSqS2M
2 factory reset an wipe system
3 install rom
https://mega.nz/#!GZdmVSbZ!t-d17jPN54aCKCBTUlBjrr-Kw_Hu1F7vxuM81ZOsp3o
4 flah DM verity zip
https://mega.nz/#!iZVkEIoB!BybDVcbYkLbVi4QTP1ocq9xIpAehWIfMMse_NYUSHNo
5 install Magisk 19.2 zip
https://mega.nz/#!uV8wFCbA!2AI4HCgpTll-lzNuNZJsiCmapI3BVZABEV32yS1tI6Y
6 wipe Dalvik cashe an cashe reboot an enjoy !
All of my builds say latest because that's what thay were at the time please check date an build numbers !
it looks like people are still looking for this one
peter couniaz said:
Hi everyone this is a 99% Deodexed an tweaked Rom I built from the latest firmware for the Galaxy J727P hope you all like it ! This Rom should be flashed after flashing the latest firmware J727PVPS6BSK1 !
1 Install twrp
https://mega.nz/#!DBMGCKII!lLUWZ3Wn8cTNKamTa1CQg1cj98ebT3uzpKt2PhSqS2M
2 factory reset an wipe system
3 install rom
https://mega.nz/#!GZdmVSbZ!t-d17jPN54aCKCBTUlBjrr-Kw_Hu1F7vxuM81ZOsp3o
4 flah DM verity zip
https://mega.nz/#!iZVkEIoB!BybDVcbYkLbVi4QTP1ocq9xIpAehWIfMMse_NYUSHNo
5 install Magisk 19.2 zip
https://mega.nz/#!uV8wFCbA!2AI4HCgpTll-lzNuNZJsiCmapI3BVZABEV32yS1tI6Y
6 wipe Dalvik cashe an cashe reboot an enjoy !
Click to expand...
Click to collapse
Here it is for you .
Related
I root my Phone With "CF-Auto-Root-m0-m0xx-gti9300"
I instal Recovery ( I try many recoverys CWM 5.xx 6.xx and TWRP ) All are working good
Everytime when I try to flash a custom rom with or without aroma all the proces are working good but when I rebot, the phone stay at samsung logo .(retry flash not help)
I can install just with Odin stock firmware.
In recovery i can instal diferent mods in stok firmware and that works good ,but when i try to instal a full rom ,custom rom ,after instal and rebut the phone stay at samsung logo
What i do wrong ? What can i do to be able to instal a custom rom ?
Please help
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
convict_moody said:
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for reply
I do what you said but i don't wait 15 - 20 min . I wait about 5 -10 minutes and i removed the battery
Recap . I understand that I should wait 20 minutes with the phone showing samsung logo ? Nothing else . Isn't it ?
boomboomer said:
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
Click to expand...
Click to collapse
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
mihaitosca said:
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
Click to expand...
Click to collapse
Yes, 5.18 doesn't flash properly for some reason.
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
rahulbrand said:
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
Click to expand...
Click to collapse
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Christiaan91 said:
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Click to expand...
Click to collapse
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
Can you give us a step by step program of what you're doing when install a new rom?
Christiaan91 said:
Can you give us a step by step program of what you're doing when install a new rom?
Click to expand...
Click to collapse
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
And what does the op say?
"1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot"
In stead of step 1 i would suggest:
Mounting /system, /data and /cache
Format /system, /data and /cache
Then proceed with step 2 etc...
Everything will be lost so make a back-up with titanium backup. (don't back-up/restore system apps)
Clean Install
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
flasherruts said:
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
Click to expand...
Click to collapse
Worked Fine...Thanks..
Hi, I am using Redmi Note 3 Pro(Snapdragon). I flashed custom rom by flashing CM14.1 Frimware Kenzo 12.04.2017, Lazy flash tool, RR-N-v5.8.3-20170709-kenzo-Weekly and Gapps. Everything is working file. I got an update to RR-N-v5.8.3-20170716-kenzo-Weekly, downloaded it and tries to flash. Go to twrp recovery and go to wipe then advanced then wipe Dalvik/ART Cache and Cache. Then i install successfully latest ROM. After that, when i reboot my device, it stucks on mi logo and restating. I have changed the bootanimation. Hepl me to go for the latest update.. When I tried to Restore the older version of RR Rom, My device sensors wll not work and i cant hear while i am calling. Plz solve this too..
tomsonmathewv said:
Hi, I am using Redmi Note 3 Pro(Snapdragon). I flashed custom rom by flashing CM14.1 Frimware Kenzo 12.04.2017, Lazy flash tool, RR-N-v5.8.3-20170709-kenzo-Weekly and Gapps. Everything is working file. I got an update to RR-N-v5.8.3-20170716-kenzo-Weekly, downloaded it and tries to flash. Go to twrp recovery and go to wipe then advanced then wipe Dalvik/ART Cache and Cache. Then i install successfully latest ROM. After that, when i reboot my device, it stucks on mi logo and restating. I have changed the bootanimation. Hepl me to go for the latest update.. When I tried to Restore the older version of RR Rom, My device sensors wll not work and i cant hear while i am calling. Plz solve this too..
Click to expand...
Click to collapse
If you can clean flash do that or else wipe system , cache , dalvik cache flash new build n reboot
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
If you can clean flash do that or else wipe system , cache , dalvik cache flash new build n reboot
Click to expand...
Click to collapse
Is there anyway to update without loosing any data? Wipe system and other things will clean my all data and i need to start from the beginning. That was too bad. I hate this process. Tell me how did u flash? or Is there any other way to flash without loosing data?
Just wipe system , cache & dalvik cache you'll not lose any data
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
Also if you wanna mod system like changing bootanimation manually etc you may brick device if you update to latest build
Sent from my Redmi Note 3 using Tapatalk
Ok here is a 99% Deodexed an tweaked stock Rom for everyone on the J727P Hope yous like it !
To install start by formatting data !
Then factory reset wipe cacha dalvilk an system in advanced wipe !
Then install my Rom after installing rom flash Magisk 19.2 then wipe cacha an dalvilk again an reboot an enjoy !
My Rom J727P.DT5
https://mega.nz/#!vcVHDSoL!gxWtC2rKAj9dFs7gMSRL_N3YpF5tcrRu3hvvjRV3iXY
Magisk 19.2
https://mega.nz/#!uV8wFCbA!2AI4HCgpTll-lzNuNZJsiCmapI3BVZABEV32yS1tI6Y
PS give it 5 to 7 minutes to boot up !
OK New build J727P.TD6
https://mega.nz/#!eVsS1Y4S!bDyNAyiDvRO5ZeahizmROblI6y2Uxsn2Iou_xKKlM70
same install as the first one have fun !
This is a 99% Deodexed Rom for the galaxy J727P from the latest firmware .
#1 install latest firmware then go into stock recovery an do a factory reset before insalling the latest twrp .
#2 go into twrp an format date install Disable Dmverity zip reboot recovery .
#3 factory reset wipe system flash rom an Magisk v19.2 zip then wipe casha an dalvilk casha an reboot it may take 5 to 7 minutes to boot .
good luck .
Rom
https://mega.nz/#!Wd9zmTbA!3xA7klag4NwnCwZOxysI4a_AZ66wtCbM21DnmPN33c4
Latest disable DM verity zip
https://mega.nz/#!WY0FFTba!1tX5HQR-iYrnJ3g-tdUOYLwtoDXk5VV1tI9CdTQMfHA
An Magisk 19.2 zip .
https://mega.nz/#!iV9nzZSb!zt9Ws_LPsFzUYJxCdsxSLK3yxoPQagfKhukN1QYmHsA