Related
Hi,
I accidentally flashed the wrong clockworkmod onto my phone (brushed the wrong phone type). I'm still in the booted up phone and am afraid to reboot it. What's the best way to fix this screwup? Ideally, i'd like to either flash stock recovery without undoing phone settings or install the proper clockworkmod recovery, which I can't find on the phone list. Here are my phone specs:
I'm on android 2.3.6 kernel 2.6.35.11, build GINGERBREAD.UCLA1.
Thanks!
Battery pull, go back to download mode, flash the correct CWM. The new/correct one should overwrite the old/incorrect one.
Edit:
CWM:
http://forum.xda-developers.com/showthread.php?t=1526431
Stock:
http://forum.xda-developers.com/showthread.php?t=1504999
snovvman said:
Battery pull, go back to download mode, flash the correct CWM. The new/correct one should overwrite the old/incorrect one.
Click to expand...
Click to collapse
Noticed the "CWM" thread above. Downloaded the ZIP file and installed with Odin. How would I verify that I now have the correct one installed?
Yes Flash with Odin. I am using Beta3 and all seems well with it. No FC's as of yet.
vintshave said:
Can you tell me where to find the right one? There doesn't seem to be much on CWM for the Note on here. Would I just flash with Odin?
Click to expand...
Click to collapse
See my edited post above. Specify file in PDA, flash away.
snovvman said:
See my edited post above. Specify file in PDA, flash away.
Click to expand...
Click to collapse
I DID flash the recovery-i717-cwm-b3.tar file. The I tried to execute a backup from the app - it was so fast, i could tell it didn't work. I rebooted the phone and used the menu system in recovery mode to do the backup. I also noticed that the recovery "menu" was much shorter than the one in my Skyrocket. Is this CWM ROM just far enough along in development to work properly with the app? If this is the case, what functionality should I avoid using in the app?
John
Most if not all of the functions work great so far. No FC here. Remember, Its still in beta stages but its coming along.
-On another NOTE, Samsung goes 5.3"
Wrong CWM recovery on LG Vortex
I used ROM Manager and flashed CWM Recovery 5.0.2.7 to my Vortex running 2.2.1....now I am stuck in recovery after attempting to flash CM7, but the Home button (or any other button) will not work to select the highlighted option. I am doing research to see if I can find some kind of option to fix my mess up but it is not looking good. I had to take out the battery, hold volume up and power and home while i plugged in the charger just to get into recovery because i was stuck on the splash screen. If anyone can provide assistance on this I would be very appreciative.
sanchitocordova said:
I used ROM Manager and flashed CWM Recovery 5.0.2.7 to my Vortex running 2.2.1....now I am stuck in recovery after attempting to flash CM7, but the Home button (or any other button) will not work to select the highlighted option. I am doing research to see if I can find some kind of option to fix my mess up but it is not looking good. I had to take out the battery, hold volume up and power and home while i plugged in the charger just to get into recovery because i was stuck on the splash screen. If anyone can provide assistance on this I would be very appreciative.
Click to expand...
Click to collapse
wrong device, wrong forum
---------- Post added at 09:29 AM ---------- Previous post was at 09:15 AM ----------
DroidScoop said:
Download our ADB Kit. From there you can flash ROMs recoveries and perform wipes from an cmd prompt on your PC. We've provided all of the commands on our post just shoot a message if you have any questions!
Sent from my Moto X Infused GS3
Click to expand...
Click to collapse
I am not sure hat it is appropriate to pedal your wares here.
this is a free and open source community. I will not follow your link, so I am not sure whether you are charging for your services or not. but soliciting your products here I think is against the forum rules.
I will look for a moderator to address this issue in a more official manner. if I am wrong I apologize, but that is how I interpret your post
captemo said:
wrong device, wrong forum
Click to expand...
Click to collapse
The thread topic looks as though it is related to my situation as I, as well, flashed the wrong recovery, I guess I was confused. I apologize. You being a senior member, I would expect that you could direct me, as I am a junior member. I was unable to find my device in the forums, so I could not find a better place to post, but I will take it elsewhere.
captemo said:
no apology needed
due to many different variances and carriers of this device, it is just a bad habit to get into o follow threads for a wrong device. even flashing files from different variances can be catastrophic.
may I ask or suggest maybe there are multiple carriers for your device and simply have a different model# ? that would at least get you closer to the center of the dart board.
although XDA is high on my list as far as trusted developmental websites, there are several other forum communities. maybe you could run a search for that if you haven't?
I will help if I can and plenty others will. again, even though problem may be similar, the solution may not and I am sure you know these device aren't cheap. I would hate for you to take your phone o beyond repair.
good luck my friend
Click to expand...
Click to collapse
Thank you. I also have XDA very high on my list of trusted websites, which is why I come directly here to do any Android related research. This situation that I find myself in right now is the result of an easily overlooked detail.
wrong cwm installed
i am using moto g - dual sim version and by mistake flashed a wrong cwm recovery.
please help
i just don't know what to do
please help
sethmotog said:
i am using moto g - dual sim version and by mistake flashed a wrong cwm recovery.
please help
i just don't know what to do
please help
Click to expand...
Click to collapse
I see you also posted this question in the Moto G section. There you mention your phone still works. If so install this.
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
NO CLUE....
440bro said:
i see you also posted this question in the moto g section. There you mention your phone still works. If so install this.
Click to expand...
Click to collapse
yeah i have downloaded it.
Now what.
I can't make out what to do in that.
When i select list of devices, my device is not there
when iselect last option 'device not listed above' it asks 'xt1033 is not supported, have you installed a clockworkmod based recovery manually?'
if i select no- its says 'sorry until xt1033 is supported..............'
yes and select the one - 'rom manager has been set up to use your existing recovery installation.'
Also please help me promote this thread if you see people with the intentions of bootloader unlocking.:
It seems that there is a ~50MB OTA being pushed to those who requested the bootloader unlock, before you download and install the OTA, we need you to capture the download link for it, and to download it for us. We need to capture these OTAs for wider opportunity to get better development for the phone.
I'll keep bumping this thread up since this is super super super important AND there is not high visibility or communication about it.
When you receive an OTA notification, DON'T download it. To capture the OTA, follow the steps in this post:
http://forum.le.com/in/index.php?threads/how-to-capture-ota-url.1875/
From @anks329, his steps are the same as the ones in the post so it should work, it is the same steps as the post above but simplified:
1.- Connect phone to computer
2.- Make sure drivers are installed
3.- Run ADB logcat
4.- check for update
5.- break the logcat process
6.- save the output into a text editor
If it doesn't work and this doesn't get you the link, don't install the OTA! you can still clear the OTA file and re-download it multiple times, this is NOT a "only 1 chance" the OTA will stick to your device until you install it.
Space saved for whatever
This one too just in case...
Hope more people see this and we can find out so we can all do it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:01 PM ----------
Anyone submitted a request but haven't unlocked it yet? Please be two people please...
I followed the steps and tried to search for the OTA link, but no dice from what I see in the text file.
Would you mind uploading the text file somewhere?
desudecchi said:
I followed the steps and tried to search for the OTA link, but no dice from what I see in the text file.
Click to expand...
Click to collapse
Well, nice try, did you already installed it? I think there is a way to wipe it and try again or to extract the OTA file...
Jose-MXL said:
Well, nice try, did you already installed it? I think there is a way to wipe it and try again or to extract the OTA file...
Click to expand...
Click to collapse
Wiped a few times and searched manually and by trying to find an HTTP link. I'll try tomorrow and upload all the text files.
desudecchi said:
Wiped a few times and searched manually and by trying to find an HTTP link. I'll try tomorrow and upload all the text files.
Click to expand...
Click to collapse
You can also try this:
http://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
http://forum.le.com/in/index.php?threads/how-to-capture-ota-url.1875/.
I think the second one is right which instructs you to click on the download button, that should generate the download link, either way the instructions are nearly the same except after you start the logcat I think you should click the download button otherwise I don't see how the OTA link would generate.
This is the process that I used to capture the first OTA, it may work for this one as well:
Connect phone to computer
Make sure drivers are installed
Run ADB logcat
check for update
break the logcat process
save the output into a text editor
Are we sure the URL WILL be logged? Why can't we try a networking approach such as sniffing for the requests? There's probably an app that creates a local VPN for this.
Something like this?
anks329 said:
This is the process that I used to capture the first OTA, it may work for this one as well:
Connect phone to computer
Make sure drivers are installed
Run ADB logcat
check for update
break the logcat process
save the output into a text editor
Click to expand...
Click to collapse
Updated OP
dennis96411 said:
Are we sure the URL WILL be logged? Why can't we try a networking approach such as sniffing for the requests? There's probably an app that creates a local VPN for this.
Something like this?
Click to expand...
Click to collapse
It does work, many many people have done this, for several brands, it's an android process not a ZTE process, someone already used the method in OP (the updated as of right now) to capture the previous OTA.
Jose-MXL said:
It does work, many many people have done this, for several brands, it's an android process not a ZTE process, someone already used the method in OP (the updated as of right now) to capture the previous OTA.
Click to expand...
Click to collapse
desudecchi just did it, and he said he couldn't find it logged anywhere. I'm just saying, an alternative method might be needed if it has to come to that.
dennis96411 said:
desudecchi just did it, and he said he couldn't find it logged anywhere. I'm just saying, an alternative method might be needed if it has to come to that.
Click to expand...
Click to collapse
He did an android terminal method, probably I need to be more specific but like I said before, I updated the OP with another method that does work, the other method that he tried and failed I already deleted. Anyways thanks for keeping the thread up.
@dennis96411 , @Jose-MXL , @anks329
I believe @jkuczera did it and he is looking for a Dev. To check the Boot OTA,
Damn, wish I'd looked here before I installed, I'd totally help you guys out. I seriously want some custom ROMs.
DrakenFX said:
@dennis96411 , @Jose-MXL , @anks329
I believe @jkuczera did it and he is looking for a Dev. To check the Boot OTA,
Click to expand...
Click to collapse
We need more to compare the files and to see if it's tied to the IMEI or not
Jose-MXL said:
We need more to compare the files and to see if it's tied to the IMEI or not
Click to expand...
Click to collapse
If somebody else can grab the file before they do the update I'll run a binary diff to see if we've got something useful.
daneoleary said:
Damn, wish I'd looked here before I installed, I'd totally help you guys out. I seriously want some custom ROMs.
Click to expand...
Click to collapse
Oh darn we need to promote this thread or something so more people see it. Since the Q&A sections appears first on page wonder if making a thread there would help.
---------- Post added at 03:28 AM ---------- Previous post was at 03:24 AM ----------
Is it possible to downgrade or wipe and reinstall this update? Just wondering, could someone just directly install the B20 update and check for this update again. Just spewing out thoughts.
Hi every one ,
It has been a long time that I am trying to repair my htc desire 825 which blocked at startup on htc.
And I ended up solving the problem with a backup that I made on another htc 825.
So if you have the same problem the solution is here :
0) unlock bootloder
1)Download the twrp and install it.
2)Download the backup htc file 825 and uncompress the twrp folder
3)Turn off your phone
4)Plug it into the computer
5)It will conectct in data storage mode
6)Copy the twrp folder to the phone
7)Unplug the phone and restart it in recovery mode
8)Go to restore and choose the copied folder for restoring
9)Restart the phone and it will work
If this not work flash the RUU file and to do this you have to relock the bootloader
then reunlock if and flash the twrp
And I also put the RUU but I have not try it yet
I leave you with the download :
Download from Here
I will post an video on youtube for those who was not able to solve this problem
Do not hesitate to post your questions
Please please, do a tutorial how to do it. Tell we where you found 825s backup?
I already have a twrp installed, I need to install kernel I think and system
Daumian said:
Please please, do a tutorial how to do it. Tell we where you found 825s backup?
I already have a twrp installed, I need to install kernel I think and system
Click to expand...
Click to collapse
Hello i have made a wipe cache and i delete my system wrongly
So i have made a backup from my secound htc desire 825 and i copied it to my desire 825 and Finley i restored it!
I cant flash the boot from any of the linked packages beacuse htc has this stupid lock - s-on and s-off. I had s-on and i locked bootloader. Now i cant unlock beacuse I need to check one box in system settings. The problem is - i cant access system. I am stuck now : (
P.S And the hostings are horrible...
Also half of ruu zip is corrupted
Daumian said:
I cant flash the boot from any of the linked packages beacuse htc has this stupid lock - s-on and s-off. I had s-on and i locked bootloader. Now i cant unlock beacuse I need to check one box in system settings. The problem is - i cant access system. I am stuck now : (
P.S And the hostings are horrible...
Also half of ruu zip is corrupted
Click to expand...
Click to collapse
Hello,
Firsti wana know if your htc desire is tuck on Wite Htc logo
if yes ,
You have to copy the file backup to your device but in your case i think that you can't so you have to reunlock the bootloader and flach the twrp zip and you will be able to copy it
Than you go to restore and choosr the copied file and install it
I'm very busy at the moment but i'll make a videoo on youtube tomorrow
Ps : sorry for the hosting i'll upload all files on mediafire soon
I hope that can help you and if this not work for you please make a feedback
Sorry for my English
Thanks Bro <3
Any progress on the video?
---------- Post added at 07:25 PM ---------- Previous post was at 07:19 PM ----------
@interfeatboy Are those files latest? I mean when was the 825 last updated? I didn't received any update since last year. Can you share you about phone screenshots? I am just curious. ?
Suyashbansal said:
Any progress on the video?
---------- Post added at 07:25 PM ---------- Previous post was at 07:19 PM ----------
@interfeatboy Are those files latest? I mean when was the 825 last updated? I didn't received any update since last year. Can you share you about phone screenshots? I am just curious.
Click to expand...
Click to collapse
hello bro ! this is not the new version !! this is juste a solusion for peoples who have deleted there systems files by mistake ( trhis is what happened to me)
PS: i found this files in a Chinese forum
interfeatboy said:
hello bro ! this is not the new version !! this is juste a solusion for peoples who have deleted there systems files by mistake ( trhis is what happened to me)
PS: i found this files in a Chinese forum
Click to expand...
Click to collapse
Will I get future updates (if there ever will be any) if I used these files?
Ps : sorry for the hosting i'll upload all files on mediafire soon
Click to expand...
Click to collapse
@interfeatboy When can you update the hosting? The current one is blocked in India. And it's very bad.
Suyashbansal said:
Will I get future updates (if there ever will be any) if I used these files?
Click to expand...
Click to collapse
yes of course this is like a stock rom
Suyashbansal said:
Will I get future updates (if there ever will be any) if I used these files?
Click to expand...
Click to collapse
well i put the files on my google drive
you can find if from Here
interfeatboy said:
well i put the files on my google drive
you can find if from Here
Click to expand...
Click to collapse
Thanks for the Drive link!
you are welcome
People who wanna me put a video just click Thank's, if there is more 5 persone i'll upload it
:cyclops:
I have a problem - when i power off the phone and then connect it to charger, the phone displays the battery sign, but soon after boots to TWRP by itself and what's more - the screen is unresponsive, so i have to shut the phone down by pressing Power+Vol-+Vol+, which is pretty annoying, has anyone came across such behaviour and managed to fix it?
Ok, i've managed to find it This is the stock recovery IMG, working fine, extracted from original firmware.
https://mega.nz/#!yYd30a7A!hK7RoQjhWkG8S2nS3__B8xbnwAssN4QI59rXJyQ1y9o
Credits go to nkk71 https://forum.xda-developers.com/member.php?u=2605798 for the great tool to exctract the firmware image,
without it i wouldn't accomplish the task.
If the link will die, PM me, i'll reupload.
silver2004 said:
Ok, i've managed to find it This is the stock recovery IMG, working fine, extracted from original firmware.
https://mega.nz/#!yYd30a7A!hK7RoQjhWkG8S2nS3__B8xbnwAssN4QI59rXJyQ1y9o
Credits go to nkk71 https://forum.xda-developers.com/member.php?u=2605798 for the great tool to exctract the firmware image,
without it i wouldn't accomplish the task.
If the link will die, PM me, i'll reupload.
Click to expand...
Click to collapse
I did this and my phone is f.. up. Thank you so much!
Hi. I am rather new to this, so please keep this in mind when I tell you what I have done.
I have a Huawei Y6 Elite. I unlocked the boot loader successfully and then tried to flash TWRP via fastboot. Somehow in this process I have flashed it to the boot partition. Now it boots to TWRP - ONLY. I can enter the recovery mode in the phone but that doesn't offer much.
The phone is NOT rooted.
Please, can someone offer me some kind of solution...??
Is it possible to flash the original firmware via TWRP and start again? If so, can someone PLEASE point me to a link to download it.
The firmware version I need is Huawei Y6 Elite LYO-L02 C718B123.
Any help would be appreciated incredibly. Thank you.
Follow this link.. Hope.. you will find your stock rom..
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
---------- Post added at 04:48 PM ---------- Previous post was at 04:39 PM ----------
And if you find the stock rom...
Then
extract the zip file which contains the rom. you'll find a folder name dload
send this dload folder to your sdcard's root directory
put the sdcard in your phone
now power on your device by pressing Vol+, Vol- and Power button at the same time.
it will start installing the official rom
Note: It will only work with Stock Recovery.
If you don have stock recovery then
Download Huawei Update Extractor
Extract the Recovery from downloaded UPDATE.APP in dload folder
put the recovery in your fastboot folder
flash the Stock recovery using fastboot
Thanks for responding.
I did follow the link and use the firmware finder, however I can't work out how to download any firmware versions.
Also I did not have any luck with the update extractor.
Is there a slightly more simplified way you can explain it. I can't seem to get my head around it.
Again, thanks for any and all help. It is greatly appreciated.
heljoy said:
Thanks for responding.
I did follow the link and use the firmware finder, however I can't work out how to download any firmware versions.
Also I did not have any luck with the update extractor.
Is there a slightly more simplified way you can explain it. I can't seem to get my head around it.
Again, thanks for any and all help. It is greatly appreciated.
Click to expand...
Click to collapse
i only found this ota on firmwarefinder
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1228/g223/v88791/f1/full/update.zip
Edit: found full firmware this is for lyo-l02 b124
https://easy-firmware.com/index.php?a=browse&b=file&id=83095\
extract the zip and extract the update.app with huawei update extracter and then flash via fastboot
Is there a trick to downloading from easy firmware or do i have to subscribe.?
heljoy said:
Is there a trick to downloading from easy firmware or do i have to subscribe.?
Click to expand...
Click to collapse
I will check
---------- Post added at 09:30 AM ---------- Previous post was at 09:29 AM ----------
Amaan007 said:
I will check
Click to expand...
Click to collapse
Edit I think u have to
Here is a new Zealand firmware try it
http://gsm-firmware.com/index.php?a=browse&b=file-info&id=18199
Damn it... every time I get close something seems to stand in the way..
Will the hicloud option still work?
What do I need to do with it?
heljoy said:
Damn it... every time I get close something seems to stand in the way..
Will the hicloud option still work?
What do I need to do with it?
Click to expand...
Click to collapse
Hicloud is an ota not the full firmware
Did it work
Hey sorry for such a delayed response.
No it did not work.
Hi helijoy,
This might be quite late, but I can help you if you can give me your /system image. If you're certain you have TWRP on your boot partition, I can give you stock boot. To extract /system, go into TWRP>Mount, select System, make sure you have adb set up (google it if not) and do these commands (from adb):
adb shell
su
dd if=/dev/block/mmcblk0p22 of=/sdcard/system.img
exit
adb pull /sdcard/system.img C:/
(replace C: with where ever you want to save it to).
Then upload the file (system.img) to something like mega or google drive and post the link here.
Huawei y6 elite (LYO-L02) rooting problem
Hi all, I have a huawei y6 elite LYO_L02C718B123
Im new to all this so not quiet sure im doing it right. I followed the steps in the article (https://forum.xda-developers.com/android/general/root-root-huawei-y6-elite-australia-t3548204),And everything went well but when i use the root checker i get a
STAGE 3 - Root User Account : Error
Error: stderr: null, stdout: null,exit_value: 1.
So hope someone can help me cause im so lost.
Moonlighter
TWRP Huawei
Hey there,
So I have just got the phone charging and am about to start trying what you suggested.
What do I need to select here..?
Thanks, Andrew.
https://forum.xda-developers.com/picture.php?albumid=14604&pictureid=56629
heljoy said:
Hey there,
So I have just got the phone charging and am about to start trying what you suggested.
What do I need to select here..?
Thanks, Andrew.
https://forum.xda-developers.com/picture.php?albumid=14604&pictureid=56629
Click to expand...
Click to collapse
Hi helijoy,
system is already selected so you do not have to do anything else. Just follow the rest of the instructions from your computer with your phone plugged in and booted to TWRP.
Thanks~
---------- Post added at 04:49 PM ---------- Previous post was at 04:41 PM ----------
m00nlight3r said:
Hi all, I have a huawei y6 elite LYO_L02C718B123
Im new to all this so not quiet sure im doing it right. I followed the steps in the article (https://forum.xda-developers.com/android/general/root-root-huawei-y6-elite-australia-t3548204),And everything went well but when i use the root checker i get a
STAGE 3 - Root User Account : Error
Error: stderr: null, stdout: null,exit_value: 1.
So hope someone can help me cause im so lost.
Moonlighter
Click to expand...
Click to collapse
Hi moonlighter,
Can you please link to which root checker app you used? Did you remember to open SuperSU first and upgrade binaries? If not, please do so. After that's done, clear data of the root checker and try again. Also, if possible, try another root checking app.
Awaiting your response,
CyanicSword
Cyanic Sword said:
Hi helijoy,
system is already selected so you do not have to do anything else. Just follow the rest of the instructions from your computer with your phone plugged in and booted to TWRP.
Thanks~
---------- Post added at 04:49 PM ---------- Previous post was at 04:41 PM ----------
Hi moonlighter,
Can you please link to which root checker app you used? Did you remember to open SuperSU first and upgrade binaries? If not, please do so. After that's done, clear data of the root checker and try again. Also, if possible, try another root checking app.
Awaiting your response,
CyanicSword
Click to expand...
Click to collapse
Thank you for getting back to me so qquick i used root checker basic and 4 other root checkers but i didnt think of flushing the data out. ill try that
m00nlight3r said:
Thank you for getting back to me so qquick i used root checker basic and 4 other root checkers but i didnt think of flushing the data out. ill try that
Click to expand...
Click to collapse
Hi moonlights,
As I already have said, ensure your SU binaries are up to date by opening SuperSU. And, if it's not too much to ask for, can you please go to TWRP, backup system and upload it somewhere? I was messing around with system and now I'm kind of stuck. It would be greatly appreciated if you could do this, as I have an an unusable phone.
Thanks again,
CyanicSword
Cyanic Sword said:
Hi helijoy,
This might be quite late, but I can help you if you can give me your /system image. If you're certain you have TWRP on your boot partition, I can give you stock boot. To extract /system, go into TWRP>Mount, select System, make sure you have adb set up (google it if not) and do these commands (from adb):
adb shell
su
dd if=/dev/block/mmcblk0p22 of=/sdcard/system.img
exit
adb pull /sdcard/system.img C:/
(replace C: with where ever you want to save it to).
Then upload the file (system.img) to something like mega or google drive and post the link here.
Click to expand...
Click to collapse
Ok... I think I must be doing something wrong.
I am sure I have ADB setup correctly though.
How exactly do you "do those commands" from ADB?
Sorry for the dense questions.
Cheers.
heljoy said:
Ok... I think I must be doing something wrong.
I am sure I have ADB setup correctly though.
How exactly do you "do those commands" from ADB?
Sorry for the dense questions.
Cheers.
Click to expand...
Click to collapse
Hi helijoy,
You said you have already used fastboot to flash TWRP. Now all you need to do is boot into TWRP, plug it in to your computer and run the commands I gave you exactly like how you ran fastboot flash recovery ......
heljoy said:
Ok... I think I must be doing something wrong.
I am sure I have ADB setup correctly though.
How exactly do you "do those commands" from ADB?
Sorry for the dense questions.
Cheers.
Click to expand...
Click to collapse
Hi again helijoy,
Another thing you can do is go to TWRP>Backup and backup everything (if you don't have any space left, just do recovery, boot and system; does are the important ones). Take this backup, upload it to something like MEGA or Google Drive and post the link here. To get this backup, do the steps in TWRP, and then connect it to your computer. Open explorer, go to the phone in This PC, ang check both Internal Storage and MicroSD Card. It will be in the TWRP>Backups folder, and the folders name will have a date and time.just upload this entire folder and post the link here.
Thanks,
CyanicSword
Hi guys,
So, I have this problem, after unbrick the phone it turn on whith the split screen. I use this method to unbrick: https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/ and now the phon it´s like in the photo. I tried all the ways: installing a new twrp, only works the Cuoco92´s twrps but instead i can not flash any rom, it turn on in black screen. Also i tried to d flash with the adb sideload , whitout results. In twrp the screen is also splited.
Many people have this issue after unbrick, no solution.
LEvvvEL said:
Many people have this issue after unbrick, no solution.
Click to expand...
Click to collapse
It seems to be an issue with stock recovery and bootloader, their are not compatible. Why I´m telling you that? Because the digitalizator it is functional, the screenshots are entire and they are many people who can restore complet the phone, but they are offline , like STEVE_MARS and many other.
It could be the QFIL file you used , please try this one and tell us --> here
---------- Post added at 07:31 PM ---------- Previous post was at 07:21 PM ----------
here is the same problem , this guy has fix it --> here
AhmadSant said:
It could be the QFIL file you used , please try this one and tell us --> here
---------- Post added at 07:31 PM ---------- Previous post was at 07:21 PM ----------
here is the same problem , this guy has fix it --> here
Click to expand...
Click to collapse
I already did it bro , same result:split screen
burebista001 said:
I already did it bro , same result:split screen
Click to expand...
Click to collapse
have you look here ?
Are you sure you followed the OP carefully? There is a TWRP that is designated for using with the 014s ROM. Please use that one. I think the issue you have is with the drivers. Some users had installed another TWRP and they fixed it. Before 016s it was another kernel, therefore a different TWRP should be used. Also please mention when the screen became split, after finishing with QFIL, or after installing TWRP.
valy_cta said:
Are you sure you followed the OP carefully? There is a TWRP that is designated for using with the 014s ROM. Please use that one. I think the issue you have is with the drivers. Some users had installed another TWRP and they fixed it. Before 016s it was another kernel, therefore a different TWRP should be used. Also please mention when the screen became split, after finishing with QFIL, or after installing TWRP.
Click to expand...
Click to collapse
This is the twrp installed after flash lemax2qfil
burebista001 said:
This is the twrp installed after flash lemax2qfil
Click to expand...
Click to collapse
Try 3.0.2-0 and 3.0.2-1. Unfortunately the post that I was referring to had a TWRP for 014s that worked for me and many others, but now the download link is dead. In that case, I can suggest the above versions. They look pretty old, enough to work with 014s. Try them and report back. By the way, you can find them in the unbrick guide, I posted the links there.
This it is the new stade of may phone. I have a custo twrp, 3.0.2 Cuoco92 and when I try to instal a new rom this happens:
https://www.youtube.com/watch?time_continue=9&v=72kNH_YbkW0
40-45 seconds later, this happens, I let it almost 40 minutes and... nothing:
https://www.youtube.com/watch?v=L-KeuL8s5Hc
Really, I can´t find any solution, it´out af my understanding...
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-...tboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
AhmadSant said:
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-...tboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
Click to expand...
Click to collapse
Oh man, I wish what the twrp is, mean whithout problem. Do you know the name?Also, the link you posted, don´t work
I don't know which version of twrp, the link provide the same steps
https://forum.xda-developers.com/showpost.php?p=70252527&postcount=2
AhmadSant said:
I don't know which version of twrp, the link provide the same steps
https://forum.xda-developers.com/showpost.php?p=70252527&postcount=2
Click to expand...
Click to collapse
Did same steps bro, didn´t work . I only can install roms with 5.6 kernel, but still split screen. If is not a HW problem , I think is a kernel compatibility with display drivers and motherboard. I think the phone has a display named "trully" , manufactured after 5.6 kernel, so there is the problem. It.´s only my opinion.
burebista001 said:
Oh man, I wish what the twrp is, mean whithout problem. Do you know the name?Also, the link you posted, don´t work
Click to expand...
Click to collapse
Heyyo, which TWRP versions have you tried so far? Have you tried as well with stock EUI recovery?
Please check this post
https://forum.xda-developers.com/showpost.php?p=75400567&postcount=19
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
AhmadSant said:
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-...tboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
Click to expand...
Click to collapse
Heyyo, always super glad to help a fellow Android enthusiast
ThE_MarD said:
Heyyo, which TWRP versions have you tried so far? Have you tried as well with stock EUI recovery?
Please check this post
https://forum.xda-developers.com/showpost.php?p=75400567&postcount=19
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
Heyyo, always super glad to help a fellow Android enthusiast
Click to expand...
Click to collapse
Hey bro, I did it already, and try with stock recovery, twrp 3.0.0 and twrp 3.0.2.0, only it let mi flash this 3 recovery.
Try these methods here