Hi all,
I have a buggy Archos Platinum 101d v2 tablet which has no complete firmware available online. I tried to flash it using the firmware of another tablet, Android boots normally but the screen is not OK (bad orientation, screen not scaled, no touch, etc.).
After investigation I have come to the conclusion that the lk.bin is not the good one (obviously not for the same screen!).
I have the ProjectConfig.mk of the old installed kernel, can I compile a new little kernel "lk.bin" file ? I don't know where to start...
Regards,
knuxxx
Related
Hello,
After tons of downloaded ROM's and weeks of webpages reading I' am still stuck in unbricking my Chinese tablet. These are my system specs:
Model: SAWEE10
Android: v2.3_20110926
Kernel: 2.6.32.9
Build: FRF85B
Mainboard: WWE101-MAIN (ver 3.4 2010/11/19)
Charger: 9V
No matter which version of ROM I have tested my device remains stuck at "Updating Image Linux-2.6.32.9" using a MicroSD prepared with WinHEX. Also the USB conection doesn't work anymore. It does start but freeze at Android green logo even if I left it for days. Can anyone help me with a correct ROM and flashing steps for this model? Many thanks in advance.
go back to where you purchased your tab from and download the rom for you tablet. the SAWEE10 is false.. i ran across that the software is a false positive.. the Tab is a 2.2 system not 2.3.. if it had superpad on the box it is a clone running on a unstable rom version from Ibex who makes the real flytouch 3. the best thing is to see if the seller have the original rom to flash your tablet.. i returned mine back and purchased a real system like acer iconia 500 from a box store.. have no problems since..
hope that helped..
Yes it's a pathetic clone and it seems that I have installed a wrong ROM version; also I wasn’t smart enough to make a copy of the original ROM (of course, my fault).
I have tried most of the ROM's present on the forums but the flashing operation freeze on "Updating Image Linux-2.6.32.9" and I don't know why. I have used the Flytouch ROM recovery, with WinHex SD formatting, and those images (ramdisk, system, userdata, etc) but doesn't work. Can be this Linux image writted separately?
try this it may help
androidtablets.net/forum/superpad-ii-firmware/12403-firmware-releases-firmware-files-benefits-bugs-flytouch2-v2-superpad-2-a.html
androidtablets.net/forum/gome-flytouch-ii-firmware/16530-rom-guide-superpad-flytouch2-wwe10-android-2-2-v2-1-3925-usb-flashing.html
poke around there you might find something
Hello guys,
I have an Star S7189 Phone which I had to return to stock (the owner tried to root but failed and wanted me to get rid of the root), but now that I flashed the stock rom the Display is totally glitchy.
The Device boots fine and I can even flash a custom recovery but even there the screen is glitched. (its basically unusable right now in this state)
I have to return it (working) to the owner.. or he will blame me (understandable)...
I flashed the following rom:
http://www.needrom.com/download/star-s7189s/
because it was the only one I could find that SP-Flashtool would let me flash.. (the other roms are all for MTK6589 but this device seems to be a MTK6582 one - at least thats what SP-Flashtool recognizes it for.
When I ran CPU-Z before all this it said 6589 though.. ?!
---
Usually I manage to fix things, but in this case I'm out of ideas.
When I got the phone it had a newer Firmware Version installed than the one I got now (it was from 2014) but I just cant find any other rom for the MTK6582 model than the one above...
Another weird thing: The sticker under the Battery says Quad 1.6 Ghz - but the MTK6582 is not 1.6 GHz is it?
I really hope anyone can help please !!!!!
I either need another rom or find a way to fix the display... I already thought it might be a hardware issue because even the battery charging screen and the custom recovery screens are affected by the glitches - but it was working alright before.. (with a half assed root which was not working .. or else I wouldnt have tried to flash stock rom anyway...)
HALP!
Additional Infos:
I *think* the rom has the wrong lcd drivers or smth .. because even I can't really "see" them, there seem to be onscreen buttons for menu and back, ALTHOUGH the device has hardware buttons for that - and the old rom didnt have any onscreen buttons showing ....
Please guys, if anyone knows a bit about those MTK china stuff please think of a way how to fix this thing .. I'm really out of ideas..
I have loaded that "MDT Flash Tool" which lets you choose drivers for lcd etc.. but this damn thing does not accept the MTK6582 rom which I need to flash - with MTK6589 roms (which do not work for the device) it opens them fine...
This could be the first soft-brick that I really cant fix ........and its due to lack of files it seems..?
Any way that I could "mod" the rom to get the display working?
Hello everyone!
I have the Vido N90 FHDRK. I flashed a rom from another tablet without changing the kernel and probably I bricked it.
At first I had only a light dark screen when I opened it without any logo. Then I tried to flash the old working rom, but the download of firmware on batchtool failed. Now, when I connect it with my pc, the first box turned to blue for a while and then to grey. I cannot flash another rom. And the tablet cannot open at all. Without a logo or anything.
Any help?
Anyone? I cannot find anything to unbrick N90 FHDRK....I tried to open the case from behind, but there is only a border that seems to be stucked with glue. I couldn't open the case.
Hello buddies,
Greetings to all from Venezuela. I have a problem with a Contixo Q103 tablet that I was messing with.
I was trying to flash a custom recovery to it and i ended up bricking the tablet. I did it accidentally with a program called Zeus Tool, wich loaded a recovery to it but the thing is that i didn't notice that it was for an A10 Processor. The tablet only shows now the Contixo logo and stays there forever.
I have searched on the internet for several days for the stock .img file for this tablet for flashing with Phoenix Suit or PhoenixCard but i haven't found anything.
I really need your help!!!
Thank You!!!
Hello. Is anyone there has a stock firmware for Jlinksz T906 ZH960. I flashed all the firmware that I can find here on XDA as well as other sites. The reason for this is because I'm finding a TWRP for this device to be flashed using SPFT. After I find one that fits my device, I immediately go to SPFT to flash it. But as I click the Download button, an error appears (something like PMT error) so I fix it by doing a FORMAT (worst thing that I did in my life) without backupping the rom because I am so sure that the firmware on this forum is actually gonna work for my device (which I realized it isn't). After formatting I can't open the device so I flashed T906 stock firmware (from the link above). After I flashed it, a lines on the screen appeared. This is the time that I realized that I'm f****d. So I went to Google and search for some more roms for T906 and I found this one that has a download link for a dump rom I think (the only firmware that I tried so far that has the display working properly). I downloaded it, flashed it and an error appears on the device "boot error!!!!!". After days and days of non-stop searching (went to some Russian and Chinese sites) on how to repair my bricked device it is time to ask for help. I flashed all the roms that I could find but only with this problem: black screen then suddenly turns off, a red or blue lines on the screen.
I recently found out that whenever I flashed the uboot.bin and pro_info of the rom with working display on some of the firmwares that I found, the display is working but the "boot error!!!!!" still haunt me.
Please, I need this device for online classes. If there's someone that can help, please.
See the attached image. That is the board model and the chips and all.
Before the problem (the time that I can fully use the device) I saw that it has an Android 9.0 Pie which is probably fake because I know for sure that it was KitKat.
Info on the back of the board:
ZH960-vEN000P
ZH960 TB-v4.1
B20200430_M116
ZH107ATB V4.1
Near the simcard tray:
ZH906-MB-v4.1
Jlinksz T906 tablet model
All help is appreciated
Thank you!