Hi guys, sorry if my post is not in the right place, it is the first time for me and please forgive my english which is not very good.
Yesterday I rooted my phone with magisk and everything went well. I wanted to install Viper4android but each time my phone restarted after installation I was stuck in fastboot mode.
So I went into recovery mode and I reset the phone. having done it several times I wanted to install TWRP via the ADB command to have a "better" recovery mod (yes im silly). I did **** and since I am stuck in fastboot but this time without the possibility of recovery mod, when I try to get there, my phone restarts and brings me back to fastboot.
My pc no longer seems to detect my phone.
Is there a solution where is this the end for me?
Thanks for your advices
EDIT : Ok so i just managed to install TWRP on my phone but when I want to make a wipe I have the following message:
failed to mount '/ sytem' (invalid argument)
failed to mount '/ vendor' (invalid argument)
failed to mount '/ product' (invalid argument)
what can I do ?
Amiral12 said:
Hi guys, sorry if my post is not in the right place, it is the first time for me and please forgive my english which is not very good.
Yesterday I rooted my phone with magisk and everything went well. I wanted to install Viper4android but each time my phone restarted after installation I was stuck in fastboot mode.
So I went into recovery mode and I reset the phone. having done it several times I wanted to install TWRP via the ADB command to have a "better" recovery mod (yes im silly). I did **** and since I am stuck in fastboot but this time without the possibility of recovery mod, when I try to get there, my phone restarts and brings me back to fastboot.
My pc no longer seems to detect my phone.
Is there a solution where is this the end for me?
Thanks for your advices
EDIT : Ok so i just managed to install TWRP on my phone but when I want to make a wipe I have the following message:
failed to mount '/ sytem' (invalid argument)
failed to mount '/ vendor' (invalid argument)
failed to mount '/ product' (invalid argument)
what can I do ?
Click to expand...
Click to collapse
You are complicating everything. Simply download fastboot rom: https://androidfilehost.com/?fid=4349826312261697682
extract it and connect mobile while launching flash.all script from firmware folder
Sorry im noob ^^'
thank u, how and where can i launch ur file ?
Amiral12 said:
Sorry im noob ^^'
thank u, how and where can i launch ur file ?
Click to expand...
Click to collapse
Inside folder named "10.0.5-GLOBAL-OnePlus7TProOxygen_14.O.11_OTA_011_all_1912060100_3029-FASTBOOT". Extract it, and run file "flash-all".
At first, it will ask you if you want to wipe data Y(es) or N(o), tap Y, hit enter and wait until device reboot.
And remember you need to be in fastboot mode all the time.
EugenStanis said:
Inside folder named "10.0.5-GLOBAL-OnePlus7TProOxygen_14.O.11_OTA_011_all_1912060100_3029-FASTBOOT". Extract it, and run file "flash-all".
At first, it will ask you if you want to wipe data Y(es) or N(o), tap Y, hit enter and wait until device reboot.
And remember you need to be in fastboot mode all the time.
Click to expand...
Click to collapse
man i love you so much....
you are the best
Thanks :highfive:
Amiral12 said:
man i love you so much....
you are the best
Thanks :highfive:
Click to expand...
Click to collapse
No problem bruh
EugenStanis said:
No problem bruh
Click to expand...
Click to collapse
If its okay for you could you teach me how to install Viper4android now ? or should i create a new post ?
Or maybe i should just give up and use my phone like a regular person
Amiral12 said:
If its okay for you could you teach me how to install Viper4android now ? or should i create a new post ?
Or maybe i should just give up and use my phone like a regular person
Click to expand...
Click to collapse
Don't use TWRP, I'm just throwing it out there, it's not working.
Check themes section for install viper4android
Sent from my OnePlus7TPro using XDA Labs
Lossyx said:
Don't use TWRP, I'm just throwing it out there, it's not working.
Check themes section for install viper4android
Click to expand...
Click to collapse
I second that. There is no point of TWRP right now. Also, viper may or may not be fully working on this phone either...I have not attempted to install it. There is a guide/post somewhere though that talks about it. Also, from experience when I did use viper on my pixel 2, I would have the same problem and my phone wouldn't boot. To get around that problem, I simply installed magisk again and then it was fine. It was like that for a while until viper was fully compatible.
js042507 said:
I second that. There is no point of TWRP right now. Also, viper may or may not be fully working on this phone either...I have not attempted to install it. There is a guide/post somewhere though that talks about it. Also, from experience when I did use viper on my pixel 2, I would have the same problem and my phone wouldn't boot. To get around that problem, I simply installed magisk again and then it was fine. It was like that for a while until viper was fully compatible.
Click to expand...
Click to collapse
The guide shows how to workaround the bootloop.
It's related to SELinux, which hopefully has now been fixed in the latest magisk update. But it requires a module template update which the viper4android devs are working to update.
It should be working soon without any workaround/tricks.
Sent from my OnePlus7TPro using XDA Labs
Thanks for all ur replies guys,
I think I will just wait for the viper4android update to install it easier
Related
hi guys
I tried to install a custom rom on my HTC One X PLUS. I am new to this and it looks like i kinda screwed up. i used "HTC One X+ AIO Kit By Hasoon2000 v2.3". I have now this "CWM-based Recovery v6.0.2.7" on my phone. i can't boot the normal OS anymore. everytime i reboot, this cwm recovery shows up. when i try to install cyanogenmod (cm-11-20140705-NIGHTLY-enrc2b.zip) by "install zip from sdcard => choose zip from sdcard ==> ..." i just receive:
Code:
set_metadata_recursive: some changes failed
E:Error in /sdcard/0/cm-11-20140705-NIGHTLY-enrc2b.zip
(Status 7)
Installation aborted.
i have no idea what to do. can anyone pls help? is it still possible to reset everything to get my phone working again?
Flash the latest version, older ones can't flash kitkat ROMs
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.8-enrc2b.img
Sent from my One X+ using Tapatalk
Phoenix09 said:
Flash the latest version, older ones can't flash kitkat ROMs
Click to expand...
Click to collapse
How can i do this? i can't put the file on my phone because my phone doesn't have a sd card.
Hutschi93 said:
How can i do this? i can't put the file on my phone because my phone doesn't have a sd card.
Click to expand...
Click to collapse
check this out http://forum.xda-developers.com/showthread.php?t=2066390 read it all, the part you need is adb sideloading, again, read it all at least a few times
leefear said:
check this out http://forum.xda-developers.com/showthread.php?t=2066390 read it all, the part you need is adb sideloading, again, read it all at least a few times
Click to expand...
Click to collapse
i already tried that, but all i get is this error:
Code:
* failed to write data 'protocol fault (no status)' *
my phone is in this "sideload mode" and i changed the filename into one word (that's what i should do if i get an error)
Hutschi93 said:
i already tried that, but all i get is this error:
Code:
* failed to write data 'protocol fault (no status)' *
my phone is in this "sideload mode" and i changed the filename into one word (that's what i should do if i get an error)
Click to expand...
Click to collapse
did you flash the recovery that phoenix suggested?
leefear said:
did you flash the recovery that phoenix suggested?
Click to expand...
Click to collapse
how? i just can open this cwm based recovery mode or this strangely HBOOT mode. but my computer doesn't really recognize it. if i open the device manager i see it under "ADB Interface" as "HTC Bootloader" but if use "adb devices" in command prompt my phone does not get recognized. the toolkit doesn't recongize it either.
OK guys i got my computer to recognize my phone in recovery mode. i can use adb push to transfer files to my phone. do i have to flash a new recovery or can a just put a new rom on my phone and try installing that?
EDIT:
OK GUYS! thanks to that i got my computer to recognize my phone i could flash the recovery phoenix suggested! and i finally could install my rom! thank you sooo much guys! you are my hero and made my day! i would give you a hug if i could but i guess nobody of you lives in switzerland
love you guys! (no homo)
Hutschi93 said:
OK guys i got my computer to recognize my phone in recovery mode. i can use adb push to transfer files to my phone. do i have to flash a new recovery or can a just put a new rom on my phone and try installing that?
EDIT:
OK GUYS! thanks to that i got my computer to recognize my phone i could flash the recovery phoenix suggested! and i finally could install my rom! thank you sooo much guys! you are my hero and made my day! i would give you a hug if i could but i guess nobody of you lives in switzerland
love you guys! (no homo)
Click to expand...
Click to collapse
glad u got it working bud!
Hi, I need help with my phone, I accidentally changed the permissions (using ROM Toolbox Lite) from the system folder making the phone crash shortly after. Now it shows the Alcatel logo and shuts off and back on in recovery mode.
I'm new with adb and CWM/TWRP stuff, but I can't find the device using adb (I installed the usb drivers correctly) , it only finds on sideload and even then I get "error: closed"...and with CWM/TWRP I can't use sideload because:
"You need adb 1.0.32 or newer to sideload to this devices" (and I used 1.0.36)
And with zip file (CWM) method I get:
"E:failed to verify whole-file signature
E:signature verification failed
Installation aborted"
Please help, I can't find the stock rom for this phone
Did you find a solution? HAve a Bootloop too
Prestnaut said:
Did you find a solution? HAve a Bootloop too
Click to expand...
Click to collapse
Nope unfortunately
Any news ?
HAve a Bootloop too , after trying to unroot with kingo .
Need stock boot.img or recovery.img in order to build custom rom from source
VTRF8FF.TMP said:
Hi, I need help with my phone, I accidentally changed the permissions (using ROM Toolbox Lite) from the system folder making the phone crash shortly after. Now it shows the Alcatel logo and shuts off and back on in recovery mode.
I'm new with adb and CWM/TWRP stuff, but I can't find the device using adb (I installed the usb drivers correctly) , it only finds on sideload and even then I get "error: closed"...and with CWM/TWRP I can't use sideload because:
"You need adb 1.0.32 or newer to sideload to this devices" (and I used 1.0.36)
And with zip file (CWM) method I get:
"E:failed to verify whole-file signature
E:signature verification failed
Installation aborted"
Please help, I can't find the stock rom for this phone
Click to expand...
Click to collapse
Hi, My 6044d also in boot loop, not rooted so I can't get stock boot.img or recovery.img in order to compile CWM and CM from source for this particular phone. Please someone post it and of course, when compiled I'll post back de results for all of us that need a custom ROM for this phone. It's crazy that this phone is not so popular and the common custom roms don't have one for it out of the box, that's why I decided to compile it myself, but I can't get my boot.img or recovery.img to configure build environment for this especific phone.
Thanks in advance!
miuserdexda said:
Hi, My 6044d also in boot loop, not rooted so I can't get stock boot.img or recovery.img in order to compile CWM and CM from source for this particular phone. Please someone post it and of course, when compiled I'll post back de results for all of us that need a custom ROM for this phone. It's crazy that this phone is not so popular and the common custom roms don't have one for it out of the box, that's why I decided to compile it myself, but I can't get my boot.img or recovery.img to configure build environment for this especific phone.
Thanks in advance!
Click to expand...
Click to collapse
Hey, sorry for taking so long to answer, i actually got 2 mega.co.nz links for this, another user gave them to me ^^
https://mega.nz/#F!XAkUDajB!EaYNGGsABPapaVFkeGNqTw
and
https://mega.nz/#!Ncx2VASY!gfxVbnQj9HK9WUGiidKY83pJZA7ToTQu5RFDfu2miWE
I found your other post too, and given that im a noob i tried to reply there, then i was trying to private message you (failed cause im not smart xD) and now im here :3
Tell me if something goes wrong, i didnt check this myself cause i sent my phone to repair, it was so broken they didnt knew it was rooted xD
Best of Luck ^^
And yeah, this phone is not popular at all, not even Alcatel cares, i emailed them to see if they were gonna release some updates, didnt even got a reply until now
But well, im gonna check out what youre doing, sowwie im a copycat xD
Good luck again ^^
I'm a little bit late but if you still need or someone else needs it just let me know as I have Carliv Touch and stuck recovery for this device.
Little late as well, but do you still have that recovery? i picked up my phone again and i wanna mess with it
Hi guys
Can't install any OS (tried via ADB commands and flashing custom roms via TWRP).
Whatever I try, it just boots to TWRP.
ADB commands do work because I managed to install TWRP 3.0 and 3.1 for the Moto Z Griffin
Bootloader is unlocked
This device was working fine on Stock Noughat (installed via ADB) and AOKP (installed via TWRP).
Problems began when the camera "failed to start" and in my frustration, I wiped everything via TWRP including system, so now I have no OS.
Not sure why I can't get anything to install.
Follow this guide: https://forum.xda-developers.com/showthread.php?t=3506342
Sent from my XT1650 using XDA-Developers Legacy app
grneyez said:
Follow this guide: https://forum.xda-developers.com/showthread.php?t=3506342
Sent from my XT1650 using XDA-Developers Legacy app
Click to expand...
Click to collapse
followed that guide
Had this working for months and needed to wipe so I did a factory reset and all my phone does is boot to twrp
I tried this process again and all goes good or so it seems but just boots to twrp
I tried a restore from my backup from twrp and get all the way done and it fails on "unable to wipe Fsg."
Above there is a bunch of red failed:
Could not mount /data and unable to find crypto foooter
Failed to mount '/data' (Invalid argument)
Unable to recreate /data/media folder
Failed to mount'/cache' (invalid argument)
failed to mount'/system'(invalid argument)
Failed to mount storage
failed to mount'/data'(invalid argument)
failed to mount'/cache'(invalid argument)
failed to mount'/data/media/twrp'(invalid argument)
unable to wipe fsg.
any ideas? right now just a brick here. i have tried flashing roms from twrp and still just boot to twrp
I'm assuming you tried to flash the stock ROM via fastboot?
If so, I'm a little at a loss here. Although since you have TWRP, try flashing the stock ROM along with its recovery following the guide linked below;
https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342
And grab the firmware for your device here;
https://firmware.center/firmware/Motorola/Moto Z/Stock/XT1650-03/
Make sure it's the correct firmware for your device. If you updated to Nougat via an OTA, you have to flash a Nougat ROM. You may also use the one linked in the XDA article, although I can't guarantee its stability.
D13H4RD2L1V3 said:
I'm assuming you tried to flash the stock ROM via fastboot?
If so, I'm a little at a loss here. Although since you have TWRP, try flashing the stock ROM along with its recovery following the guide linked below;
https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342
And grab the firmware for your device here;
https://firmware.center/firmware/Motorola/Moto Z/Stock/XT1650-03/
Make sure it's the correct firmware for your device. If you updated to Nougat via an OTA, you have to flash a Nougat ROM. You may also use the one linked in the XDA article, although I can't guarantee its stability.
Click to expand...
Click to collapse
Maybe it's because I haven't had my coffee yet, but is there a US 7.0 file on that site? I can only find the 6.0 version. I'm on Rodgers nougat rom I flashed a couple weeks ago and I'd like to get on the US version since I've been having apn issues
royalflush5 said:
Maybe it's because I haven't had my coffee yet, but is there a US 7.0 file on that site? I can only find the 6.0 version. I'm on Rodgers nougat rom I flashed a couple weeks ago and I'd like to get on the US version since I've been having apn issues
Click to expand...
Click to collapse
Sadly, no.
As of right now, there's only a Marshmallow-based RETUS firmware. It'll take a while for someone to post firmware that's Nougat-based for RETUS.
D13H4RD2L1V3 said:
Sadly, no.
As of right now, there's only a Marshmallow-based RETUS firmware. It'll take a while for someone to post firmware that's Nougat-based for RETUS.
Click to expand...
Click to collapse
Ah, thanks for confirming. Do you happen to know of a twrp flashable zip for retus 7.0 then?
royalflush5 said:
Ah, thanks for confirming. Do you happen to know of a twrp flashable zip for retus 7.0 then?
Click to expand...
Click to collapse
Again, there's sadly no TWRP-flashable firmware for 7.0 RETUS.
There's only one for TELUS. While it works on other XT1650-03s with unlocked BLs, can't guarantee that it's all stable.
https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-unlocked-versions-t3552210
I know this thread is old but maybe this will help someone out. I had the exact same problem after a Factory Reset my phone went on a TWRP bootloop. To resolve it, just reboot into Bootloader and then select Factory Mode. My phone just started as new.
lovetatfitties said:
I know this thread is old but maybe this will help someone out. I had the exact same problem after a Factory Reset my phone went on a TWRP bootloop. To resolve it, just reboot into Bootloader and then select Factory Mode. My phone just started as new.
Click to expand...
Click to collapse
Thank you for this!!!!!!! It solved my boot loop problem too after installing stock via fastboot. Only thing that worked.
raymccoy said:
Thank you for this!!!!!!! It solved my boot loop problem too after installing stock via fastboot. Only thing that worked.
Click to expand...
Click to collapse
thanks for the Rescue same trick work for me though as i was been stuck on TWRP after flashing stock firmware via fastboot , so i manage to flash irfan v4 stock rom and booted to factory image to get it resolved , But now i want to move to complete stock without twrp as i think Oreo update is near by but i get the same issue again, Just wanna ask can u help me out with the process to go back to stock Rom
lovetatfitties said:
I know this thread is old but maybe this will help someone out. I had the exact same problem after a Factory Reset my phone went on a TWRP bootloop. To resolve it, just reboot into Bootloader and then select Factory Mode. My phone just started as new.
Click to expand...
Click to collapse
that worked for me also, but it's not a fix, its a workaround. is there an actual fix for this? I've tried the Verity_FE_patcher but that didn't work also.
Hay,
today I've tried to root my OnePlus 7t Pro and installing TWRP my drive is killed.
At the first try of flashing the "twrp-3.3.1-4-guacamole" the system get completely wiped and the phone was fully wiped (and the installation doesn't work to)
Later I've managed to flash "twrp-3.3.1-74-guacamole-unified-Q" and that worked, but now I cant do anything because I only get "Failed to mount '/vendor' (invalid argument)" and "Failed to mount '/system' (invalid argument)".
And yes, I have tried to change the file system to ext2 and back to ext4 but this fails to.
Do have some one any idea I can "remount" the two partitions?
Sorry if this sounds completely stupid but I have searched for 4 hours on google and found something like 100 times the same solution but that doesn't work. :crying:
EDIT: I have try'ed "Repair File System" to, there i get a "/sbin/e2fsck -fp process endet with ERROR: 16" "Unable to repair System.".
Maybe because TWRP doesn't actually work on devices on launched with Android 10.
It literally says in the TWRP thead that mounting these partitions does not work.
You'll just have to wait.
Sent from my OnePlus7TPro using XDA Labs
Lossyx said:
Maybe because TWRP doesn't actually work on devices on launched with Android 10.
It literally says in the TWRP thead that mounting these partitions does not work.
You'll just have to wait.
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Even if it doesn't mount drives?
Because, a.t.m. there is no android because it was wiped completely.
TazztheMonster said:
Even if it doesn't mount drives?
Because, a.t.m. there is no android because it was wiped completely.
Click to expand...
Click to collapse
You'll likely have to use MSM tool or fastboot ROM to flash your device to stock.
Sent from my OnePlus7TPro using XDA Labs
same problem here. cannot mount drives after non branded rom flashing through fastboot after trying to rollback from beta to stable channel.
TazztheMonster said:
Hay,
today I've tried to root my OnePlus 7t Pro and installing TWRP my drive is killed.
At the first try of flashing the "twrp-3.3.1-4-guacamole" the system get completely wiped and the phone was fully wiped (and the installation doesn't work to)
Later I've managed to flash "twrp-3.3.1-74-guacamole-unified-Q" and that worked, but now I cant do anything because I only get "Failed to mount '/vendor' (invalid argument)" and "Failed to mount '/system' (invalid argument)".
And yes, I have tried to change the file system to ext2 and back to ext4 but this fails to.
Do have some one any idea I can "remount" the two partitions?
Sorry if this sounds completely stupid but I have searched for 4 hours on google and found something like 100 times the same solution but that doesn't work. :crying:
EDIT: I have try'ed "Repair File System" to, there i get a "/sbin/e2fsck -fp process endet with ERROR: 16" "Unable to repair System.".
Click to expand...
Click to collapse
You know guacamole is oneplus 7pro not our 7tpro right?
Is for another device...
Secondly our twrp is not functioning bc of the super partition that is on our phones
Our phones shipped with Android 10 so they have to have a new twrp made for our devices to support this.
The 7pro shipped with Android 9.0 that is why twrp works on their device and not ours
Currently I would not flash twrp on our device until they have made one that works for us
Until then patch your boot img in magisk (Google search this if you don't know how) to obtain root.
Btw 7tpro is called hotdog
toolhas4degrees said:
You know guacamole is oneplus 7pro not our 7tpro right?
Is for another device...
Secondly our twrp is not functioning bc of the super partition that is on our phones
Our phones shipped with Android 10 so they have to have a new twrp made for our devices to support this.
The 7pro shipped with Android 9.0 that is why twrp works on their device and not ours
Currently I would not flash twrp on our device until they have made one that works for us
Until then patch your boot img in magisk (Google search this if you don't know how) to obtain root.
Btw 7tpro is called hotdog
Click to expand...
Click to collapse
Perfect
Now you’re talking!‘.
Sent from my OnePlus7TPro Global using XDA Labs
Have you solved? I have the same problem
TazztheMonster said:
Even if it doesn't mount drives?
Because, a.t.m. there is no android because it was wiped completely.
Click to expand...
Click to collapse
(OnePlus 7T Pro)
I unlocked bootloader, i installed ADB, I installed TWRP. But as I wanted to install Magisk i got an error. I ALREADY WIPED VERYTHING DUE TO A WRONG VIDEO
So now I can´t boot, because no OS. I also can´t install an OS, because System and Vendor can´t be mounted. I tried everything which were in those forums ( exFAT, exFAT 4, back to exFAT 2)
Pls help if this got solved anywhere. I don´t care about bootloader or root now. I just want to USE my device again with an OS
I beg you please help me
nikiwithstyle said:
(OnePlus 7T Pro)
I unlocked bootloader, i installed ADB, I installed TWRP. But as I wanted to install Magisk i got an error. I ALREADY WIPED VERYTHING DUE TO A WRONG VIDEO
So now I can´t boot, because no OS. I also can´t install an OS, because System and Vendor can´t be mounted. I tried everything which were in those forums ( exFAT, exFAT 4, back to exFAT 2)
Pls help if this got solved anywhere. I don´t care about bootloader or root now. I just want to USE my device again with an OS
I beg you please help me
Click to expand...
Click to collapse
Use MSMtool and stay on stock.
So I fixed the problem one day after. IF YOU GET THE MESSAGE NO OS INSTALLED ASWELL IGNORE IT! Trust me there. The Errormessage itself is a error. Because there is no real TWRP for the oneplus 7T pro. Just boot it it will work
Hello everyone!
I am in the process of rooting this device. I need to do this since I need to test / develop AR Apps. So either I buy a new phone or I root this one and try if it works (and by trying that avoiding buying one). After some driver issues - I solved them by using Linux instead of Windows - I ended up with TWRP. In TWRP - Install I was not able to install anything since I got some permission errors. Now I seem to be unable to even install TWRP by using
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
but the device is still recognized while in fastboot.
When I enter recovery I get a long list of errors. Like:
E: [libfs_mgr] Failed to open '/dev/block/platform/bootdevice/by-name/cache': No such file or directory.
Click to expand...
Click to collapse
or
E: [libfs_mgr] Failed to format /cache:No such file or directory
Click to expand...
Click to collapse
Is there anything left I could try to get a working TWRP with permissions?
Thanks for any hints!
Andreas