Hello i need firmware for one phone ihunt like hi5 mtk6580 i dont find thx
late
4shared.com/zip/LacH7zjciq/MT6580_EMMC_O11019__8_1_0_Like.html?
Ihunt Alien Xlite 2020
Hello! please help me, where can i find firmware for ihunt alien xlite? after a restart it remained in bootloop, and after many attempts to flash with SP tools an incompatible firmware, now it opens in black screen and without recovery, the vol + - keys work, the volume sound is heard. can anything else be done? thank you!
Related
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hello guys,
Yesterday I was about to flash my Gionee Elife S plus to upgrade it to Nougat 7.1.2; but obvisly I did a wrong manipulation and I did erase everything on my phone; now it is dead (even with power+ volume up doesn't work).
The only tool I have it's: Sp flash tool V 5.1 ; please help me to fix this problem.
P.S: I did a recovery of my data before I did the manipulation.
Any idea to restore the bootloader and android 6.0 or 7.1 ????
So cute... After erasing the bootloader you really think you can restore it?
I'm sorry but what you did is worst than hard bricking. You literally screwed up your device.
Last thing you can do in my opinion: take your phone and make an How to Basics tutorial with it, if you know what I mean.
Trust me, your phone is definitely dead, unless something happen when you touch power button.
In that case your device still got its bootloader alive and you can reflash your firmware and your recovery or a custom one (I suggest in this case) to reflash your data after that.
Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.
Hello guys,
Sorry if this has been posted, but I was unable to find it on the forum, and I searched, a lot.
Problem is that suddenly, the phone got stuck in an infinite boot loop. It powers up, shows the white screen with black letters Blu boot up screen, and then powers back off. Then repeats.
I'm able to press the Volume Up key, and it gets to the Recovery menu, but before I can do anything, it powers back off, and then repeats the loop.
Any ideas? Help? Will be much appreciated. Thank you!
Try reflashing Lollipop stock ROM using SP Flash Tools with proper drivers.
Install VCOM drivers for MTK.
1. Download SP Flash tools for the BLU Vivo 5/A55 Slim from here
2. Download the repair ROM for the BLU Vivo 5 from here. This will remove everything on your phone, completely resetting it.
Note: This is the repair ROM for the BLU Vivo 5. If you are on some other Device, please use a google search and locate the repair ROM for your specific device. It will be approximately 1 to 2 GB in size.
3. Flash the repair ROM to your phone with SP Flash Tools.
4. Use OTA to update your phone to Marshmallow.
Click to expand...
Click to collapse
If you need help, comment.
Letrix said:
Try reflashing Lollipop stock ROM using SP Flash Tools with proper drivers.
Install VCOM drivers for MTK.
If you need help, comment.
Click to expand...
Click to collapse
Hi Letrix, thank you for the reply. I've seen some posts about re-flashing, but the idea is to keep the information on the phone, specifically, the photos. Is there any alternative to re-flashing without loosing the information?
lokiyito said:
Hi Letrix, thank you for the reply. I've seen some posts about re-flashing, but the idea is to keep the information on the phone, specifically, the photos. Is there any alternative to re-flashing without loosing the information?
Click to expand...
Click to collapse
Make a backup with TWRP.