i have a samsung sm-g960u, that is locked to Sprint. On attempt to network unlock it by flashing the CP, it decided to never boot into the OS again. To clarify, when it was done flashing (with latest Odin), it reset, and made it to the blue screen with the Android icon, and the spinning arrows that says "Updating system software" and it will stay that way until the battery runs out. Upon using the Volume down and Pwr button reset, instead of taking me to Maintenance Mode, it goes to the black Factory Reset screen. Rebooting, Shutting Down, and rebooting into Download mode, all result in the phone being locked at this screen. I still have Download mode if im quick enoough to hit it after i power cycle it, and ive flashed the stock software successfully ( Odin says anyway) multiple times, with this same result. My question is this: Is this fixable through using the Nand Erase option in Odin? Also in the logs, i noticed it had some lines about the kernal being experimental(?) and to not use it, so im wondering when i flashed that CP modem file, if it somehow re wrote this version kernel into the phone? Im completely at a standstill here and any help would be great, as the phone is completely unusable at this point.
Related
Hi everyone, I have this weird problem with my S6500, or rather my younger brother has.
He tried to put on his S6500 (not D, this phone is with NFC) Cyanogenmod 10.1, after some ups and downs, he finally got it to work, but... camera wasn't working, it was said on the cyanogenmod page to flash with the newest update, he did that, phone worked good... almost, after he was blocking his screen, he couldn't unlock it, because there was some kind of white screen stuff, weirder was the thing, that he could hear all the *clicking* sounds as he was trying to unlock. He had to restart the phone every time after he blocked the screen, so he wanted the phone to function normally and tried to put his stock ROM back again. Well the flashing went well (as Odin showed) but the phone stucked in bootloop.
The phone showed the Orange logo (he is using his original stock rom from Orange Poland, downloaded from sammymobile) and then it quickly changed to Samsung logo, after that the phone vibrates once, and after that it vibrates 3 times really fast and restarts from the Orange logo.
He tried to get into Recovery mode, but coul;dn't (the phone doesn't react to any of the combinations we found - vol+,vol-, home and power and many others), and as I forgot to mention before, after every flash (while the recovery was working) he cleared data in menu of the recovery.
We also tried the different method to boot the phone into recovery mode (put it in Download mode, which works and then instead of going further by pressing vol+ we pressed the down button and held vol+,vol- and home button, but instead of going into recovery the phone booted in weird screen with small letters RAMDUMP MODE (ARM9 mode).
We tried several times to flash new recovery with Odin, but it doesnt work, the PIT file also doesn't work, or can someone provide me with the stock s6500 PIT file as I couldn't find one, because I read in the Polish forum, that screen mentioned before only shows up if there is a SuperUser app in the phone, so we need the PIT file to flush it.
So the problem is after flashing it with numerous cwm and original stock roms we couldn't get it to boot or to get into recovery menu, or get it working.
Also the hardware is all ok, as the phone is almost brand-new ( he got it from the Orange few months ago).
So help plz?
I have the very SAME problem with my S6500D. Same as described above.
Anyone has managed to fix this problem ? I have all needed tools.
I recently tried flashing back to stock (JFD) from a CM 2.3.7 rom using Odin 1.7 and a 512 pit file. However, along the way I encountered many problems. For starters, the phone currently does not load past the vibrant boot screen; ergo, I can't call or text. During the process of flashing the stock rom, my phone had an error saying, "data wipe failed." Then my phone went to the Vibrant boot screen, which proceeded to the battery animation, instead of the usual T-Mobile boot screen/sounds. If I pulled the USB and pressed the power button, the phone would then proceed to continuously loop through the Vibrant boot screen.
The phone is most likely bricked right now, and I don't know how to fix it. I tried looking elsewhere and found people talking about flashing a "Eugene 2.2," but I have no idea what or where to find this; can anyone help?
I went on to use AIO Vibrant Toolbox to try to restore to stock, but that persistent error keeps coming up. Halfway through the ODIN process, I can see my phone's screen show a bunch of words, scrolling up. Among those words say, "Data wipe failed."Afterwards, the phone loads the Vibrant boot screen and battery animation; ODIN says SUCCESS, although I know the flash didn't work. I have reason to believe this is why my phone isn't flashing properly?
Hope this will get you straight.
Berzxrk said:
I went on to use AIO Vibrant Toolbox to try to restore to stock, but that persistent error keeps coming up. Halfway through the ODIN process, I can see my phone's screen show a bunch of words, scrolling up. Among those words say, "Data wipe failed."Afterwards, the phone loads the Vibrant boot screen and battery animation; ODIN says SUCCESS, although I know the flash didn't work. I have reason to believe this is why my phone isn't flashing properly?
Click to expand...
Click to collapse
Try using Heimdall One Click from this thread.
This probably won't help in your case, but try pulling the external sd card if you haven't already. Pulling the external sd card has solved a few boot loops for me in the past, but they were related to a new rom install.
OK I screwed up. I would appreciate any help here. Rogers S6 Edge, G925W8. It was stock 5.0.2.
Wanted to try a ROM so flashed TWRP, then flashed Kingfisher ROM v1.1 (it seemed the safest / W8-friendly). ROM was fantastic (much better battery), but GPS would never lock.
Tried to start over by flashing stock Rogers 5.0.2 via Odin but it wouldn't flash. I read (a little too late) that downgrading isn't something Samsung enjoys. Argh!
Then out of desperation, I flashed the BL (BL_G925W8VLU2BOH8_5.1.1.tar) from http://forum.xda-developers.com/galaxy-s6-edge/general/canadian-odin-5-1-1-bootloader-twrp-t3196595 , which was a very bad move, I assume because I wasn't on 5.1.1 to begin with. Crap!!
So now the phone gets to the Galaxy S6 edge splash screen, with "KERNEL IS NOT SEANDROID ENFORCING", and it stays there. The phone also gets very warm, and I can't shut it off. Using VolDown+Power+Home reboots it (showing the same message) but doesn't shut it off. Using VolUp+Power+Home reboots it but only says the same thing about Recovery.
Please tell me that I didn't just brick this phone!!
UPDATE:
Am able to get the phone into Download/Odin mode by holding the 3 buttons (voldown+power+home) while plugging the phone into USB. The stock Rogers image refuses to flash (Odin says fail immediately), but I am a step closer thanks to @brar.arsh's thread ( http://forum.xda-developers.com/galaxy-s6-edge/general/canada-galaxy-s6-edge-canadian-users-t3069314 )
From there I grabbed the "S6 Edge Stock Firmware OG2" which comes in 4 parts (BL, AP, CP, and CSC). I added all 4 pieces to Odin and started flash. Boot.img and recovery flashed, but then during the system.img flash, it failed about half-way through. Right after that failure, something changed because the device now became "Unknown Device" to windows, and it complained that "a USB device has malfunctioned, and Windows no longer recognizes it".
This gave me hope that I could get into Recovery (since that flash was successful), but the phone likes to boot directly to the "The update failed so please launch Smart Switch" message - regardless of starting with VOLUP+PWR+HOME button combination. So no recovery access... but making progress.
I belive I initiated a flash that contained JUST the BL, CP, and CSC portions, and it passed quickly. This, of course, isn't enough to get the system going. I just wanted to see if it would fail in other areas.
Trying the emergency flash via Smart Switch: Smart Switch said it required the phone to be in Recovery mode, but it still attempted the fix even though I was in Odin/Download mode. Good news, but unfortunately it gave the same result - a failure at around 50% of the entire flash operation.
I have tried re-flashing the AP portion several times and it fails at different progressions (50%, 75%, 90%)... so close.
I was thinking that it was maybe a power issue (since the battery was completely dead during the "kernel is not seandroid enforcing" period, with no way to turn the phone off or pull battery), I wondered if the battery just needed a little juice before starting the operation. I let it stay plugged in for a few minutes after one of the many failed flash attempts (screen was illuminated with the progress bar frozen at the point of failure). I noticed that when I unplugged it, it didn't die immediately, so I plugged it back in (getting the "USB device has malfunctioned" message again), and forced it to restart by holding the VOLDOWN+PWR+HOME buttons). It got back into Odin mode and the PC recognized it again. Loaded up just the AP portion in Odin, hit Start, left the room, and when I came back it said PASS! I cannot prove that it had any battery power from this method... or if it even helped. This could have just been a fluke.
The phone automatically rebooted into Recovery mode (which scared me) so I hit Power Down.
Rebooted the phone - I hear the lame Samsung startup song, and it is booting. Hallelujah.
UPDATE: I got stock firmware flashed on it, but as soon as it finished, it just stuck in the Samsung Galaxy S6 Edge boot screen, and it won't even allow me to access recovery mode so I can wipe cache and whatnot. I'm running out of patience with this brick of a phone. It just goes straight to the same boot screen, not allowing me to get to the recovery mode. Are there any alternative ways to enter recovery mode, or alternative ways to wipe cache and partition? Please, any advice is welcomed.
Thanks in advance.
Try different odin version and cable before you messing with pit.
Sent from my SM-N920C
I had tried using three different versions of Odin, 3.07, 3.09, 3.106. I also used multiple cords and multiple versions of stock roms. And still, no success. It won't even stay off, every time it juices up, or is plugged in, it goes straight to the Samsung Galaxy S6 Edge boot screen and stays there.
Mind you, I am not too familiar with anything outside of stock roms, some custom roms and rooting. Have not tested out much more than that. Any noob-friendly advice would be welcomed.
I had nand write start error once during downgrading my s6 from 6.0.1 to 5.1.1. I just tried odin 3.10 and it got flashed successfully. I was lucky then.
Sent from my SM-N920C
Well, I finally got one of the firmwares to work, it ran through Odin and everything just fine, but after it was done, it basically did the same thing, it stayed on the Samsung black screen, except without the red writing at the top..
Sent from my SM-N910W8 using XDA-Developers mobile app
Enter recovery and factory reset
Sent from my SM-N920C
I can't access recovery, the phone won't turn off, so as soon as it has any source of battery life, it just goes straight to the samsung boot screen and stays there.
Hold vol down+power button for 15-20sec. As soon as it reboot, hold vol up+power+home button to enter recovery.
Sent from my SM-N920C
I've tried that at least 50-ish times now, It just does not work, I tried it with a second or two delay, I tried it immediately after screen turns off, tried it so many times. No matter how long I hold them down for, it just stays at the boot screen. I can get to download mode just fine, but for some reason recovery seems to not be working.
is it a bootloop (it keeps restarting or it is frozen on samsung logo) ?
if bootloop you can try: plug in power corde. press and hold both volume buttons + home + power untill it shuts down. unplug power corde. press and hold home volume down and power for download mode. get another rom and flash it.
Hi i am having exactly the same problem can boot to download but not recovery, let the phone run out of battery and as soon as you plug it in again bootloop, i was running crisscross marshmallow rom ,custom kernel i have a backup but am not sure what or how to flash correctly in Odin any help would be much appreciated thanks .
Edit flashed firmware from sammobiles worked a treat .
Any updates on this?
I have this exact problem however I never attempted rooting my phone or changing anything on the firmware, I was on YouTube when my s6 edge crashed then entered boot loop, I CANNOT ACCESS recovery mode ,but I can access Odin mode. WTF everything is stock on my phone, never even heard of 'bootloop, Odin mode' before this happened .or even had to access my recovery mode on my s6. As I search the web for help I find solutions that require recovery mode, but I can access it. Apparently bootloop happens when people try to root but I never tired that. I don't even know what that is!
This just happened to my S6. Was watching YouTube then it crashed and entered a boot loop, can't access recovery, only download mode.
MarkWCAU said:
This just happened to my S6. Was watching YouTube then it crashed and entered a boot loop, can't access recovery, only download mode.
Click to expand...
Click to collapse
Flash stock firmware
Ok, so one night I was using my phone normally (Browsing. Watching YouTube, Playing Games) like everyone else does. Then all of a sudden it shuts off, but immediately turns on again without me pressing a button. (So basically it suddenly auto restarts on its own) This occured maybe 2-4 times (all in one night) until one time, it shuts off but doesn't turn on again (basically an automatic shutdown), so I tried turning it on again (Power button), then I got shocked because all of a sudden it enters a boot loop (Screen displaying this sequence : Samsung Galaxy S4 screen, my carrier logo screen, The encrypted screen (where you have to enter your encryption password) then again the Samsung logo but this time with the colors splashing from the background, then it shuts off again.) Sometimes after the boot loop sequence, it vibrates but never turns on again, sometimes it just turns off after the sequence. And as I try and try to get away from the boot loop, the sequence became shorter. So I'm guessing it's a battery problem, BUT my battery isn't bloated or deformed. I tried clearing the cache first, again the sequence got shorter (never going up to the carrier logo screen), then I tried formatting the data, still to no avail. Now, when I turn it on, It shows the Samsung logo screen for 2 seconds and shuts down.
I tried flashing it with ODIN thru Download mode BUT (HERE'S where another problem occured) :
My phone never get pass on the system.img.ext4 dialogue and my screen just goes blank. But ODIN still recognizes my phone. And when I remove the USB cable, ODIN says FAIL.
I'm sure the cable is working. I downloaded the firmware for my carrier (Tre 3).
What could be the real problem here?
Here is the description of my device :
Samsung Galaxy GT-I9505
Bought from Italy, Tre 3 carrier
Can I download a different region/carrier for my I9505 phone?
Advanced thanks for anyone who comments and I'm very sorry for my English. Thanks!
I would install TWRP recovery, boot to it, and use it to format data, which will remove the encryption. Then I would either push a rom to the phone via recovery or try to reinstall the stock firmware with Odin. Make sure that you run Odin as admin as well. The firmware must be the same version or newer. If you still have the stock recovery and can boot to it, then I think the build number of the currently installed firmware will be visible there. You should be able to use that to Google the correct version you need.
Hey it's me. Just posting a quick reply.
Thanks for replying to my post. Yesterday I successfully flash a rom to my GT-I9505 (Version 5.0.1 Italy HUI 3G). However it still didn't boot up. At first try it booted up to the first setup screen then just randomly shuts down. Then as I try to boot it up again, It just shuts down after the first Samsung logo (with the GT-I9505 logo), I can't boot into recovery cause it shuts down. I'm sure it's not a battery issue cause when I boot into download mode, it can stay in that screen for like 10 minutes. What could be the issue? I'm planning to disassemble my S4 sooner to see if something's wrong inside. Thanks again for the reply