EDIT:
In my way of trying to apply to warranty and flashing the stock package into the phone and Windows being Windows, I had problems using the batch script, it stopped for long time and didn't do nothing forcing me to restart the phone and restart the batch, until I uninstalled the driver and make Windows reinstall it automatically (manage devices) and it finally flashed it all, actually I flashed the package three times just to be sure lol. So, in the end I wanted to turn off the friggin phone because I was very done with it (what a PITA it has been) and wanted to apply for my warranty so as there is no command in fastboot to shutdown the phone I didn't know how to shut it down so I tried pressing Power button and releasing it the moment the screen goes off but I think I didn't do it right or the phone can't be shutdown that way (this is most probably the answer), well the phone rebooted and by the grace of Zeus it booted for the first time into MIUI and now is waiting for me to configure the phone, none of the times I flashed this packaged into the phone it booted into MIUI, never, and just when I want to turn the phone this thing boots, I don't know if I'm going to venture into flashing anything again being the phone how it is but goddamnit it was a real PITA, I had to use my old Redmi Note 3.
So, tl;dr: Flashed stock package, phone booted finally, all is OK for now.
====================================================================================================
====================================================================================================
Sooo, I was having problems with flashing stuff on this phone but I solved them and I was able to flash HavocOS, it was OK and I could use my phone kinda well (some reboots but nothing serious, or so I thought). So, until 12 hours ago my phone was having problems with the File Manager (I used FX app and also the stock one), it hanged and didn't respond and made the phone reboot itself a couple times, that was weird, actually the whole time I used this ROM I was having problems with my files, it used to took long time to read some files and I was thinking that maybe my SD was bad but apparently it's not. So, after the second reboot I was able to finally open the file manager but navigating through the SDCard was buggy and the app didn't show me any file (it show me an empty list) so I rebooted my phone manually (this time wasn't done by the phone itself) and now is when the phone never passed from the Havoc logo, I waited something close to 30 min and nothing, rebooted and waited 10 min and nothing, it still hanged on the logo, went into recovery to wipe everything and re-flash all and after doing all that and tried to boot to system my phone was booting to recovery and didn't past that, tried installing stock (flash_all script) and then installing recovery and everything again and nothing, it booted to recovery always. So there is when I realized I couldn't change anything in the slot A (at least to what boot refers), I can't install TWRP nor OrangeFox, I can do it in slot B, and even if I boot into recovery on slot B I can flash the zip installer, change the slot and try to boot to recovery from slot A but it boots to the bootloader, and yes, TWRP didn't output any error when flashing the installer.
Yes, the script flashes everything OK, well not everything, system and vendor partitions (A and B) I had to flash them manually because it gave me some errors with the script (reading errors, and yes I compared checksums so it was super weird) but in the end supposedly the stock ROM must have been installed, which I couldn't try because even after flashing everything on the script the phone was booting to bootloader, I didn't give importance to this because before I was able to flash and boot HavocOS I did the same thing because my phone was bootlooping into fastboot: I ran the script, flashed manually those images because it gave me the same errors, tried to boot to system and the phone booted to bootloader, didn't give a sheat, flashed OrangeFox recovery, ROM, recovery installer, GApps, nofde patch and then I was able to boot to HavocOS. But now this time I tried to install TWRP with fastboot command but it didn't worked, fastboot doesn't throw any errors while flashing, it reported:
Sending 'boot_a' (39780 KB) OKAY [ 1.042s]
Writing 'boot_a' OKAY [ 0.208s]
Finished. Total time: 1.263s
But if I try to boot into recovery it sends me to fastboot/bootloader, if I do this in the slot B I can successfully boot into recovery and, as I said, if I flash the installer, change the slot and reboot to recovery, my phone reboots to fastboot.
This has happened to someone else?
Does anybody knows of any solution?
I still have warranty (phone has less than 3 months) so I probably can flash the stock package and lock my bootloader so I can get my phone checked as probably it is a hardware failure, probably and hopefully .
Oh, and also I have to add that the recovery was also lagging sometimes (OrangeFox). Sometimes when I was looking into files on the SD, also when I pressed the "reboot system" button it hanged for half a minute and the it proceeded to reboot, and also once when I was flashing the nofde patch the phone also hanged and rebooted into recovery by itself. So this indicates that maybe is a hardware thing right? Because there is no way that the recovery could have gotten corrupted or something just out of the blue.
Yes. I'm another victim here... And now I can't install recovery on slot b either. Can't figure out what's wrong. This giving me such a hard time...
RthurPendragon said:
Yes. I'm another victim here... And now I can't install recovery on slot b either. Can't figure out what's wrong. This giving me such a hard time...
Click to expand...
Click to collapse
What I ultimately did was wipe everything on slot A, then wipe everything on slot B, then I proceeded to install the ROM on the slot A then re-flash the recovery and reboot to system and that's all. But I did had to wipe both slots A and B. If nothing works you can apply the original ROM (search for it on these forums) and go back to stock.
Jhon_Locke said:
What I ultimately did was wipe everything on slot A, then wipe everything on slot B, then I proceeded to install the ROM on the slot A then re-flash the recovery and reboot to system and that's all. But I did had to wipe both slots A and B. If nothing works you can apply the original ROM (search for it on these forums) and go back to stock.
Click to expand...
Click to collapse
In my case, I wiped system and installed Evolution X ROM (OSS version) with Custom Recovery (SHRP) Then when I want to reboot into recovery again to flash Magisk, There's no recovery... It always opens with fastboot mode. I tried flashing recovery.zip from slot b. Still no result.
Yes. I'm next victim here... And now I can't install recovery on slot b nor slot a. Can't figure out what's wrong. When i flash twrp recovery it flash successfully but when I boot into recovery it stuck in fastboot mode
Change slot and flash again but nothing worked it again stuck in fastboot mode even i flash different version of Twrp(3.2.1) but again it stuck in fastboot mode both a and b slot.
So i flashed stock rom and lock bootloader.
If have any solution how to install custom recovery please help me.
Thanks
Iamdchandan said:
Yes. I'm next victim here... And now I can't install recovery on slot b nor slot a. Can't figure out what's wrong. When i flash twrp recovery it flash successfully but when I boot into recovery it stuck in fastboot mode
Change slot and flash again but nothing worked it again stuck in fastboot mode even i flash different version of Twrp(3.2.1) but again it stuck in fastboot mode both a and b slot.
So i flashed stock rom and lock bootloader.
If have any solution how to install custom recovery please help me.
Thanks
Click to expand...
Click to collapse
Because there are 2 different twrp's.
One of which is for Android 9 and the other for Android 10. You are flashing the wrong one which is why you go to fastboot.
All documentation is on the applicable threads.
People need to stop blindly flashing stuff without reading the documentation or even know what they are doing.
So many people have bricked mi A3 because they don't read first
garylawwd said:
Because there are 2 different twrp's.
One of which is for Android 9 and the other for Android 10. You are flashing the wrong one which is why you go to fastboot.
All documentation is on the applicable threads.
People need to stop blindly flashing stuff without reading the documentation or even know what they are doing.
So many people have bricked mi A3 because they don't read first
Click to expand...
Click to collapse
I have flashed twrp latest 3.4.4 for Android 10 but it is stuck in fastboot mode either slot a or b.
What happened if i downgrade Android 10 to 9 and then flash twrp. Maybe it will successfully flashed.
Iamdchandan said:
I have flashed twrp latest 3.4.4 for Android 10 but it is stuck in fastboot mode either slot a or b.
What happened if i downgrade Android 10 to 9 and then flash twrp. Maybe it will successfully flashed.
Click to expand...
Click to collapse
Don't do it you will mess up your persist partition.
How are you flashing? You must be after typing something wrong
garylawwd said:
Because there are 2 different twrp's.
One of which is for Android 9 and the other for Android 10. You are flashing the wrong one which is why you go to fastboot.
All documentation is on the applicable threads.
People need to stop blindly flashing stuff without reading the documentation or even know what they are doing.
So many people have bricked mi A3 because they don't read first
Click to expand...
Click to collapse
garylawwd said:
Don't do it you will mess up your persist partition.
How are you flashing? You must be after typing something wrong
Click to expand...
Click to collapse
First if all reboot into fastboot mode then connect with pc then type command " fastboot flashing unlock" enter now again forcefully reboot into fastboot mode then type next command "fastboot flashing_critical unlock" now bootloader unlock.
Again reboot into fastboot mode then type command "fastboot getvar current-slot"
Now change current active slot and then type command " fastboot erase boot" . Now finally flashed twrp latest (3.4) for Android 10 with command "fastboot flash boot twrp.img" now it flash successfully then type command "fastboot reboot" and then press volume up then hit enter and it return in fastboot mode then i have again change slot and repeat all process with that slot but it again stuck in fastboot mode. After all i have changed twrp version but again same thing repeat so I flashed stock Android 10 through Mi flash and lock bootloader.
That's all whole process.
If do something wrong please help me to figure out.
Waiting for your reply ?.
Love
try sharp recovery
Sami Devo said:
try sharp recovery
Click to expand...
Click to collapse
I don't know installation process of sharp recovery.
Iamdchandan said:
I don't know installation process of sharp recovery.
Click to expand...
Click to collapse
install on the other slot... dont flash it on running rom slot... if rom running A.. chng it to B. then flash to B.. then goto recovery flash the sharp zip when sharp opens..then again chng slot to A.. running rom slot..
okk ur phn boots.
Related
I have the castor windy version 16gb SGP511. I was previously rooted but not unlocked. I unlocked the boot loader. Installed the twrp image on the pac man thread which i think was dual recovery cause Philz,Cwm came out, so I can install lollipop version of the rom. Made a backup of the stock rom. Followed this instructions - Install the Lollipop ROM + GApps+SuperSU using whatever Recovery you have.
- Turn off device completely.
- Press <Volume Up> and plug USB cable.
- LED should turn blue.
- Send command: "fastboot erase recovery"
- Send command for Castor_Windy: "fastboot flash recovery TWRP_Castor_Windy.img"
- Send command for Castor: "fastboot flash recovery TWRP_Castor.img"
- Unplug USB cable.
- Device will reboot.
- When LED turns pink press <Volume Up> and <Volume Down> several times.
- You should now see TWRP
I wasnt fast enough so stock rom booted. I used Adb reboot recovery to access recovery and did as the above mentioned. Wiped i tried to install the rom which failed. Rebooted back to system and got stuck in Sony boot up screen. I can access fastboot. Read though the forums I have to find a ftf or a system image file and use a flash tool. What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Kamaleon said:
What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Click to expand...
Click to collapse
Try this Xperia downloader tool. Should let you see which versions are which. If you want an easy root, then stay away from the KitKat builds, unless you want to unlock bootloader.
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
Use Flashtool to flash your downloaded ftf file. Just make sure your device is charged.
http://forum.xda-developers.com/showthread.php?t=2335555
I believe flashtool will even install the drivers for your 511
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Kamaleon said:
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Click to expand...
Click to collapse
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Moscow Desire said:
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Click to expand...
Click to collapse
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Kamaleon said:
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Click to expand...
Click to collapse
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Moscow Desire said:
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Click to expand...
Click to collapse
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Kamaleon said:
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Click to expand...
Click to collapse
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Moscow Desire said:
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Click to expand...
Click to collapse
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Kamaleon said:
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Click to expand...
Click to collapse
Well, I'm not sure which route to take.
However, I will tell you what I have learned the other day.
I have the 521 with unlocked bootloader. Rooted with my own boot.img, flashed SuperSU using "flashboot boot recovery.img" (yeah, sometimes it doesn't show on the display, so it takes a few times).
Now, other day I was going to check out the new LyPop pre-rooted. Fastboot flash recovery recovery,img, and it won't boot it to recovery like it should. Like it's not flashed. Tried it a couple times. Now, I didn't install the dual recovery as I'm not sure how that kernel (boot.img) will interact with my current tabs OS. Not to mention I need it for my work until tomorrow. But strangely it sounds like the same issue you have.
This weekend I will investigate it. As for me, I will probably flash the Stock ftf lyPop build, and just root it using a modified boot.img.
One thing I do know, is flashing a custom recovery to the "recovery" partition, doesn't seem to work like it used to work on other devices. It seems the flashing to the "Fota kernel" partition seems to be the only method that works. This is what happens when you flash that dual recovery, or any recovery that has a boot image using "Fota". Probably explains why you can't get rid of it using "fastboot erase recovery". because it's erasing the wrong partition. Only flashing a full ftf gets rid of it, because the ftf has a new FotaKernel it flashes.
Eh, something like that. Will look at it this weekend.
Hello, fellow Android hackers.
Short: I am trying to install CM on a L21, but fail booting into TWRP (getting only stock recovery).
What I did, working with a brand-new phone:
Unlock bootloader.
Flash TWRP 3.0.2.
Boot to TWRP. It worked.
Try flashing CM, which failed due to some failed assert. Googling revealed a thread on these forums which suggested I had to do a stock update to Marshmallow first.
Downloaded the update through EMUI's updater.
The updater booted to TWRP which aborted the installation because of a failed zip signature check.
I disabled signature checking and ran the installation again. It succeeded.
Tried to directly install CM over it. I got the error message stating I couldn't flash on top of incompatible data.
At this point, I probably should just have wiped system and flash CM, but for some reason I decided to boot to stock.
Here is where it all seems to have gone wrong.
Try to flash and boot to TWRP, like in steps 13 to 18.
Push the B340 UPDATE.APP to /sdcard/dload.
Start the phone using power + vol down + vol up.
I have verified that the phone is on B340 and the builtin updater won't find further updates.
(I have repeated this step and the following ones countless times.)
Boot to bootloader and flash TWRP. Yes, the command succeeds.
Code:
…$ sudo fastboot flash recovery twrp-3.0.2-0-kiwi.img
target reported max download size of 266338304 bytes
sending 'recovery' (45202 KB)...
OKAY [ 1.418s]
writing 'recovery'...
OKAY [ 0.641s]
finished. total time: 2.059s
fastboot reboot
adb reboot recovery # boots to stock recovery
Boot to bootloader and flash TWRP.
Hold power + vol up
I read that the duration holding the keys matters, so I tried this very often, but I always got to one of two different stock recoveries.
Factory reset and cache wipe with one of the two stock recoveries.
I also considered crushing the phone on the wall on multiple occasions, but then decided it would not help me with my goal.
Okay.
L21 with B340, how u boot to TWRP? -_-
Also, the two stock recoveries have the menu options "Download latest version and recovery, Reboot, Shutdown" and "Reboot, Wipe data/factory reset, Wipe cache partition".
I humbly thank everyone in advance who might have some contributions to share.
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b34p, but b320 is a great base and supports all custom roms..try it
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
Romiui said:
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
Click to expand...
Click to collapse
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
thilak devraj said:
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b340, but b320 is a great base and supports all custom roms..try it
Click to expand...
Click to collapse
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears pretends to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
but I know of no way to flash recoveries via ADB.
D
Click to expand...
Click to collapse
All recoveries can be Flashed throw Fast-boot ADB Boss .
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
muradulislam said:
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
Click to expand...
Click to collapse
I did, but to no avail. Reunlocking had no effect either.
muradulislam said:
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
Click to expand...
Click to collapse
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
ksdug said:
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
I did, but to no avail. Reunlocking had no effect either.
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
Click to expand...
Click to collapse
wait......
you couldnt make it?? ok right now were are you at??
how to boot Honor 5x into TWRP
I know this is an old post, but since I tried for nearly a week to get my Honor 5x to boot in TWRP when pushing volume up + power button, I just wanted to post how I finally got it working, just in case anyone else should have the same problem...
1. First, I downloaded the latest stock rom. On my Honor 5x Android 5 (Lollipop) was installed, so I downloaded an Android 6 (marshmallow) stock rom. Make sure to get the correct version for your region (e.g. C432 for Europe). I found the correct rom file by simply googeling. If you are in a boot loop or do not have a working android on your phone, read instructions below.
2. I un-zipped the rom file and copied the update.app to my sd card to folder "dload"
3. I booted regularly into Android and started the update installation from the settings, where I could select option to install from SD card.
4. once that was done, i enabled USB debugging in developer tools and booted into TWRP from ADB with command
fastboot boot twrp-3.1.0-0-kiwi.img
5. Then, I installed SuperSu (SuperSU-v2.82-201705271822.zip)
6. Then, I flahed TWRP directly FROM TWRP. To do so, I clicked "Install" button, clicked "Install Image" and then selected TWRP file (which i copied to my SD card earlier). BE CAREFUL TO FLASH TWRP as Revovery (NOT boot). Actually, I first flashed twrp-3.0.0-0-kiwi.img, then directly after flashed twrp-3.0.2-0-kiwi.img and then I flashed twrp-3.0.0-1-kiwi.img (you see I was kind of desperate...). After that, from TWRP I booted into bootloader and again flashed twrp image from PC using adb:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
7. from ADB, I again booted into TWRP
fastboot boot twrp-3.1.1-0-kiwi.img
8. ... where I once more installed TWRP.
After that I clicked reboot and selected to boot into Recovery. Then it finally worked.
After endless tries to get my phone to boot into TWRP when pushing volume up and power button, I am not sure which of the above steps made the difference. I think the important part is to update to the latest android version.
BTW: my first problem was I bricked my phone by trying to install lineageos from TWRP 3.1.1.1 and was in an endless bootloop. Here is how I got a regular android running:
I booted into bootloader (power + vol DOWN) and flashed the following files from adb (i got the files by extracting an android stock rom with Huawei Update Extractor (HuaweiUpdateExtractor_0.9.9.3.zip)):
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
Hope this helps...
It's better to post in a new thread, that will be more helpful for you
I have used LGUP to install software (Nougat) and it's working fine..
I then install TWRP as normal, no issues reported during install (I can see via cmd screen).
I then proceed to reboot to recovery using methods I have been using for months, and it goes to yes, yes selection.
It then doesn't load TWRP but carries on wiping my phone to basics again.
Have tried various methods of putting TWRP on but does anyone think is something to do with Nougat as the bootloader unlocked screen is different, larger text etc
Have now tried a KDZ for marshmallow and recovery still won't go to TWRP.
It's almost like the recovery area is now not accessible?
Any suggestions please?
alienex said:
I have used LGUP to install software (Nougat) and it's working fine..
I then install TWRP as normal, no issues reported during install (I can see via cmd screen).
I then proceed to reboot to recovery using methods I have been using for months, and it goes to yes, yes selection.
It then doesn't load TWRP but carries on wiping my phone to basics again.
Have tried various methods of putting TWRP on but does anyone think is something to do with Nougat as the bootloader unlocked screen is different, larger text etc
Have now tried a KDZ for marshmallow and recovery still won't go to TWRP.
It's almost like the recovery area is now not accessible?
Any suggestions please?
Click to expand...
Click to collapse
Hmm strange. Have you tried rebooting using "adb reboot recovery" ?
I would suggest you flash recovery and boot straight into it not allowing the phone to boot into android. So flash recovery, remove battery, then try booting into recovery. Im pretty sure recovery can be lost if you boot into android before flashing SUPERSU (https://download.chainfire.eu/696/supersu/)
But i could be wrong
You have to do the following:
1) Flash the TWRP trouch Fastboot, don't reboot
2) Remove the battery, put it back, don't turn on the phone normally!
3) Use the button combination to enter in recovery
Ok have flashed again and it has "Stuck" this time after pulling battery before reboot so TWRP back!
Now to flash again and chill
Thanks both
So I'm pretty new to the forums, and pretty new to the rooting scene in general, but I'd like to think I have a general idea what I'm doing (barely)
I'm trying to flash LineageOS on to my Pixel, and each time after flashing the ROM, I get stuck in a bootloop and can only access the bootloader, or I can access TWRP if I use "fastboot boot twrp.img"
Here's the tutorial I've followed to get root, I've followed it to a T:
-Flash stock image from google of whatever version you are going to be running (I went with ppr2 sailfish (as i have the pixel 1))
-Fastboot to twrp (I used version 3.2.3-1-sailfish)
-Flash TWRP.zip (NEXT STEPS ARE WHAT MADE THE DIFFERENCE)
-Do not just hit reboot after installing. Press the back button and go to the home screen of twrp again.
-Clcik the reboot there and click "Do Not Install" this is in reference to the TWRP application with which you don't want to install
-Now turn back off your device and go into twrp again
-Flash magisk 16.7 (NEXT STEPS ARE ALSO WHAT MADE THE DIFFERENCE)
-Do not hit reboot right after you intsall it or will be in a boot loop
-Go back to home screen, hit reboot then hit power off
-Wait a few seconds thens turn that ***** on.
Click to expand...
Click to collapse
And I've followed the directions directly from Lineage on how to flash the ROM. I've also tried flashing the verified boot signer afterwards, I've tried installing a different kernel that supposedly disables "dm-verity" (which seems like it might be the issue but I'm not sure)
I've tried changing the boot parameters from 'b' to 'a' with "fastboot set_active a"
I've tried numerous different steps and each time it's the same process. I get stuck in the bootloop with the bootloader, so I flash the stock image, then reinstall TWRP, Reinstall Magisk / Root, then try to install Lineage and get bootloops, rinse and repeat for the last 2 days. I'm completely at a loss. Any advice? It's much appreciated.
dylanfitz32 said:
So I'm pretty new to the forums, and pretty new to the rooting scene in general, but I'd like to think I have a general idea what I'm doing (barely)
I'm trying to flash LineageOS on to my Pixel, and each time after flashing the ROM, I get stuck in a bootloop and can only access the bootloader, or I can access TWRP if I use "fastboot boot twrp.img"
Here's the tutorial I've followed to get root, I've followed it to a T:
And I've followed the directions directly from Lineage on how to flash the ROM. I've also tried flashing the verified boot signer afterwards, I've tried installing a different kernel that supposedly disables "dm-verity" (which seems like it might be the issue but I'm not sure)
I've tried changing the boot parameters from 'b' to 'a' with "fastboot set_active a"
I've tried numerous different steps and each time it's the same process. I get stuck in the bootloop with the bootloader, so I flash the stock image, then reinstall TWRP, Reinstall Magisk / Root, then try to install Lineage and get bootloops, rinse and repeat for the last 2 days. I'm completely at a loss. Any advice? It's much appreciated.
Click to expand...
Click to collapse
i cant seem to flash any stock firmware on mine. keeps mentioning something about user data. i have tired ota and even factory images. did you get yours resolved? thanks
Hello! This is my first thread on the forum;
I'm writing because I think I soft bricked my Xiaomi Mi Pad 4 LTE, let me explain from the very beginning.
It's a brand new device, bought today, and with a custom italian ROM which was sold with.
I just wanted to root it, and the bootloader was already unlocked because it was a custom ROM, so I tried to install TWRP (mocha version for Mi Pad) with Fastboot and then I wanted to install Magisk.
The issue is that, when I tried to flash TWRP to recovery with fastboot flash recovery twrp.img, it all went "OK" but then TWRP was not actually flashed and couldn't boot it with key combinations, it just looked like it wasn't there. I also tried to boot it without flashing, with fastboot boot twrp.img but it gave me
"Failed to load/authenticate boot image: 00000050" error
Looking on the web, I found someone who told to try fastboot flash boot twrp.img and so, without even thinking, I did it.
That's the main issue. I rebooted, and found that TWRP started, but now I couldn't boot my device anymore, because the default boot.img file was replaced by twrp.img. So, practically, TWRP replaced my device's default system (I think?).
Then, I tried to find a stock firmware for Mi Pad 4 (Clover) on the web, and I found it, so I flashed the stock firmware boot.img, fastboot flash boot boot.img, but when I rebooted, the device was stuck in the loading screen with three dots loading over a "Powered by Android" logo. I waited 20 minutes, nothing, it looks stuck, so this stock boot.img doesn't seem to work.
I can actually flash TWRP and that stock boot image both whenever I want and switch between them; the first works, the latter doesn't.
So, in poor words: I flashed twrp.img as boot.img and now I can't boot normally, but TWRP starts when turning on my device.
But I just want to get my default boot.img or system, or any other way to reaccess to my device. That's fine even if I have to hard reset or wipe everything, it's fine even if I am going to lose data, but please, just help me.
Can someone help me? I'm just a newbie in this world, please help me unbricking my device.
Thanks in advance.
Try installing twrp again and boot to it
Download custom rom.of your choice ( im using hovac and it been great for a year now )
Move it to your mipad via comouter
Format everything in twrp and install the rom and gapps
--- I just remembered havin same issue u having and if im not mistaking : u should reboot to recovery right after installing twrp ( you dont reboot to system )
Im not really sure about it cause it happened long time ago
@DanielVipx
Sorry, seems you tried that already. Did you try the mi flash tool?
This might help:
https://osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/