Hello, i want to root my device, which is a Alcatel 3X 5048Y, but didn't find it a recovery on TWRP or Clockworkmod, what can I do?
THanks
?
???????
Same Here
I would also like to know how
RE:
i want to root it too, i find a post from other forum.
I don't know if this is against the rules, but https://www.mobilkulup.com/threads/alcatel-3x-5048y-2019-rom-lazim.9874/ .
I already make a reply, and now there is time to wait.
Klairm said:
Hello, i want to root my device, which is a Alcatel 3X 5048Y, but didn't find it a recovery on TWRP or Clockworkmod, what can I do?
THanks
Click to expand...
Click to collapse
In order to root an Android neither TWRP nor CWM is required at all.
I assume you're familiar with how to work with ADB binaries on your computer & USB debugging is turned on on your phone. So just download the SuperSu v2.82 APK for your phone (Google it - it's NOT available on Google Play Store) onto your PC.
Afterwards start an ADB session entering the commands shown next one by one
Code:
adb devices
adb remount
adb install "<FULL_FILEPATHNAME_TO_DOWNLOADED_SU> "
That's all.
jwoegerbauer said:
In order to root an Android neither TWRP nor CWM is required at all.
I assume you're familiar with how to work with ADB binaries on your computer & USB debugging is turned on on your phone. So just download the SuperSu v2.82 APK for your phone (Google it - it's NOT available on Google Play Store) onto your PC.
Afterwards start an ADB session entering the commands shown next one by one
Code:
adb devices
adb remount
adb install "<FULL_FILEPATHNAME_TO_DOWNLOADED_SU> "
That's all.
Click to expand...
Click to collapse
Idk why you say this, SuperSU is not an app for rooting
Related
can anybody teach me?
When mine P-500 on Android 2.2,I can root & using custom recovery
Now I using Android 2.2.2,I using GingerBreak v1.2 to root and I already root.
But when I want to operate custom recovery steps.
Then 1st.-restart my phone =>finish ok
2nd.-connect to PC & open Debug mode =>finish ok
3rd.-open windows DOS Command mode and type "adb shell" =>finish ok
4th.-In "$" prompt to input "su"(own superuser)
=show"Permission denied" why??
Hope someone talk to me how to
Thanks a lot
When you type su on your pc, you will usually get a prompt from the superuser app on your phone where you will have to allow it for the procedure to proceed on the pc. Have you done this?
And, If I understand correctly, gingerbreak need not always install busybox and superuser correctly on your phone. check first whether you have the superuser app on your phone and that it works. If not, install these 2 apps from the market.
Then try the procedure once more.
If you are trying to install a custom recovery on your phone, you don't need adb. You can install a custom recovery using a tool like terminal emulator on your phone. The procedure to do so is mentioned in the following thread -
HOWTO] Rooting, Installing -Android SDK, Custom Recovery, Custom ROM's
I had recently upgrade my s3 using TWRP recovery from 4.4 to 7.1 lineage os
But I am facing problem with rooting.
I am not able to root my device from
1)TWRP recovery
2)Odin(CF Auto Root)
3)Kingroot(Android and PC )
I have installed TWRP properly
PLz give an idea to root my device
I have checked in developer option
That is ROOT ACCESS
Their is 2 Option only
1)Disable
2)Adb only
But I am not able to get root access any of this Or Adb only
Previously I tried with different ROM
Their is option of
1)disabled
2)Apps only
3)Adb only.
4)apps and Adb
But in this ROM I am not able to find suggest me any way to fix this
I installd 4 time s same ROM to get this root access but failed
Check below screenshot
In SuperSU application
No su binary installed
https://dropfile.to/bRO4jKc
https://dropfile.to/MMWxWrp
As far as I'm aware the rom should be pre rooted and all you'll need to do is install supersu from googleplay and then update the su binaries from within the supersu app.
Set it to option 4 (apps and abd) and go about installing supersu first as the app from googleplay and if no joy then as a flashable zip file.
Beamed in by telepathy.
amitrider04 said:
I had recently upgrade my s3 using TWRP recovery from 4.4 to 7.1 lineage os
But I am facing problem with rooting.
I am not able to root my device from
1)TWRP recovery
2)Odin(CF Auto Root)
3)Kingroot(Android and PC )
I have installed TWRP properly
PLz give an idea to root my device
I have checked in developer option
That is ROOT ACCESS
Their is 2 Option only
1)Disable
2)Adb only
But I am not able to get root access any of this Or Adb only
Previously I tried with different ROM
Their is option of
1)disabled
2)Apps only
3)Adb only.
4)apps and Adb
But in this ROM I am not able to find suggest me any way to fix this
I installd 4 time s same ROM to get this root access but failed
Check below screenshot
In SuperSU application
No su binary installed
https://dropfile.to/bRO4jKc
https://dropfile.to/MMWxWrp
Click to expand...
Click to collapse
Did you try to flash the addonsu.zip from LineageOS website?
You must flash it to get root access in LineageOS 14.1
I have tried to flash addonsu for lineage os
×64
But failed now i am getting just option to
Apps and adb but its not giving me obtain root
Options are available in root acces
Apps only
Adb only
Adb and apps
But if i checked adb and apps or anything
Root checker still says No root
I am not able to get root access:crying:
Flash a stock firmware and start over.
Beamed in by telepathy.
amitrider04 said:
I have tried to flash addonsu for lineage os
×64
But failed now i am getting just option to
Apps and adb but its not giving me obtain root
Options are available in root acces
Apps only
Adb only
Adb and apps
But if i checked adb and apps or anything
Root checker still says No root
I am not able to get root access:crying:
Click to expand...
Click to collapse
Are you sure you flashed the correct addonsu???
As far as i remember, the s3 doesn't have 64x, flash the normal arm version (arm32x).
Bro i have tried to flash ARM AND ARM X86 but it says
update failed in twrp recovery
So i flashed with x64
It was done but not worked properly
Check this
https://s21.postimg.org/99z5kiw07/Screenshot_2017_03_20_12_21_53.png
amitrider04 said:
Bro i have tried to flash ARM AND ARM X86 but it says
update failed in twrp recovery
So i flashed with x64
It was done but not worked properly
Check this
https://s21.postimg.org/99z5kiw07/Screenshot_2017_03_20_12_21_53.png
Click to expand...
Click to collapse
flash supersu.zip 2.79 with twrp it worked for me
Thanks it also worked for me:laugh:
Thank you!!!
That worked for me.
Now i would like to know why this works and not the file from Lineage itself....
Zwolly said:
Thank you!!!
That worked for me.
Now i would like to know why this works and not the file from Lineage itself....
Click to expand...
Click to collapse
It works, you will get an error in recovery, but when you boot, you will get root access normally, i don't why the error happens, but it's harmless anyway.
Root fix
I'm not sure if you have fixed it yet but just in case if this helps the way I got around this is by simply downloading the latest super su zip from the official site and manually flashing via twrp kinda sucks but it works the first boot took a little though so if you try this and it takes forever for your device to not just wait because it can take up to 15 min the first time. So basically as long as you have twrp you are rooted technically it's just based on the rom wether they chose to support it if not the zip always works but you need the app too.
amitrider04 said:
I have tried to flash addonsu for lineage os
×64
But failed now i am getting just option to
Apps and adb but its not giving me obtain root
Options are available in root acces
Apps only
Adb only
Adb and apps
But if i checked adb and apps or anything
Root checker still says No root
I am not able to get root access:crying:
Click to expand...
Click to collapse
amitrider04 said:
Bro i have tried to flash ARM AND ARM X86 but it says
update failed in twrp recovery
So i flashed with x64
It was done but not worked properly
Check this
https://s21.postimg.org/99z5kiw07/Screenshot_2017_03_20_12_21_53.png
Click to expand...
Click to collapse
S3 has arm32. So neither x86 not x64 would work. You should've flashed addonsu.zip for 32.
Sent from my Pixel XL using Tapatalk
Hi . Ive already unlocked my E2312 , and rooted with an app . But the problem is i cant seem to get into adb fastboot mode to flash the custom recovery
any ideas ?
Which app you use for rooting? There is good topic in forum for rooting and installing of TWRP (Recovery) - you need to follow all steps inside. Before this check that all adb drivers are successfully installed and working on PC.
Ive read what i can to open at least into adb mode but to no avail haha
I cant open into bootloader mode , no recovery mode even if i already unlocked it.
I tried rooting it with the one click app roots since i cant get into recovery mode, i used kingoapp . got my root , and tested some rooted apps like titanium backup and flashify . All seem to work normally
I tried using flashify to flash the recovery.img but as soon as i tried to pick the image inside my internal phone , the app got stuck . But besides that if i were to pick any other settings it would be just fine .
P.S M4 Aqua E2312
If you can't open adb then maybe drivers are not installed correctly on PC. Which operation system you use - if it's windows 10 then there is special procedure for installing. You need to disable drivers checking by windows to be able to install them - use Google to find how. After successfully installed drivers you need to approve connection with PC on your phone - message will appear on the screen of phone. After this you can install kernel and TWRP via adb.
This is the only way to root our phones. I also try Kingroot and one click root app at the beginning but it won't work properly.
The root programs either don't work or are run by
extremely shady companies like KingoRoot. If I ask something here, no one answer or I get incomplete answers.
There's contradictory information everywhere, like I heard I need root to be able to install a custom recovery.
And I heard I need to install the custom recovery to be able to root. Wtf?
Even the guys who create the programs like Clockworkmod provide no info, where is clockwork recovery?
Why is it conspicuously missing from the creator's website? Why does TWRP also provide no info on their website?
Is this some conspiracy to keep rooting out of the reach of anyone but the android elite?
I have seriously never seen such a frustrating mess in my entire career in IT of over 20 years.
Because the software rooting method is find security hole on device an exploit it. But Google has strengthened the security that was first put in place in Lollipop, essentially making it unfeasible to launch the su daemon with the required permissions just by modifying the /system partition. So only Systemless Root method will work on Marshmallow or above.
For how to root Marshmallow device, I suggest you to take a look at SuperSU forum.
Hope this help you
EXA Lab said:
Because the software rooting method is find security hole on device an exploit it. But Google has strengthened the security that was first put in place in Lollipop, essentially making it unfeasible to launch the su daemon with the required permissions just by modifying the /system partition. So only Systemless Root method will work on Marshmallow or above.
For how to root Marshmallow device, I suggest you to take a look at SuperSU forum.
Hope this help you
Click to expand...
Click to collapse
Thanks a lot! Could you tell me do I need to root it before I can flash a custom recovery like TWRP or Clockwork Recovery or can I flash those with fastboot regardless of the the tablet being rooted?
I was able to unlock the bootloader.
androidferret said:
Thanks a lot! Could you tell me do I need to root it before I can flash a custom recovery like TWRP or Clockwork Recovery or can I flash those with fastboot regardless of the the tablet being rooted?
I was able to unlock the bootloader.
Click to expand...
Click to collapse
If you are using fastboot, you don't need to worry about root.
You can flash recovery with fastboot.
androidferret said:
Thanks a lot! Could you tell me do I need to root it before I can flash a custom recovery like TWRP or Clockwork Recovery or can I flash those with fastboot regardless of the the tablet being rooted?
I was able to unlock the bootloader.
Click to expand...
Click to collapse
If you have a device with unlocked bootloader, then rooting it is easy.
First what you need to prepare:
1. A PC that have adb and fastboot installed
2. A custom recovery that match your device (TWRP Recovery for example)
3.. Enable the Usb Debugging on your device
How to:
1. Connect your PC and device with cable
2. Open cmd and enter this command:
Code:
adb reboot bootloader
3.Once your device boots into bootloader mode, enter this command:
Code:
fastboot flash recovery \Path-where-you-stored-the-twrp-file\twrp.img
4. Once TWRP is successfully flashed on your device, run the following command:
Code:
fastboot reboot
After that, you can boot into twrp recovery and install the SuperSU zip file to root the device.
Thats it, the usual way to root an android device. But if your device brand is Samsung, you have to flash recovery throught odin.
Hope this solve your problem.
EXA Lab said:
If you have a device with unlocked bootloader, then rooting it is easy.
First what you need to prepare:
1. A PC that have adb and fastboot installed
2. A custom recovery that match your device (TWRP Recovery for example)
3.. Enable the Usb Debugging on your device
How to:
1. Connect your PC and device with cable
2. Open cmd and enter this command:
Code:
adb reboot bootloader
3.Once your device boots into bootloader mode, enter this command:
Code:
fastboot flash recovery \Path-where-you-stored-the-twrp-file\twrp.img
4. Once TWRP is successfully flashed on your device, run the following command:
Code:
fastboot reboot
After that, you can boot into twrp recovery and install the SuperSU zip file to root the device.
Thats it, the usual way to root an android device. But if your device brand is Samsung, you have to flash recovery throught odin.
Hope this solve your problem.
Click to expand...
Click to collapse
You must be one of those Android elite he was talking about.
ninjasinabag said:
You must be one of those Android elite he was talking about.
Click to expand...
Click to collapse
lol not really, just a simple android lover
EXA Lab said:
lol not really, just a simple android lover
Click to expand...
Click to collapse
Thanks EXA Lab I really appreciate your help, but I have a local/generic brand device (SPC purchased in Spain)
It's not an international brand so there are no custom recoveries for it. Is there anything I can do in this case?
What is the name of your device?
gb_14 said:
What is the name of your device?
Click to expand...
Click to collapse
It's this:
SPC Glow 10.1 3G 3.1
SKU 9765108B
Designed in Europe, Assembled in China.
spc-universe.com
Smart Products Connection S.A.
androidferret said:
It's this:
SPC Glow 10.1 3G 3.1
SKU 9765108B
Designed in Europe, Assembled in China.
spc-universe.com
Smart Products Connection S.A.
Click to expand...
Click to collapse
The only way for you to try is to use some one-click root tool like KingRoot or something.
Has anyone here rooted this tablet with Magisk?
Any very detailed step by step guide somewhere with links to the specific files to download for this tablet? (It'd be great if it didnt't require a PC but even if it does, I'd really appreciate a detailed step by step guide to put Magisk on this tablet)
Thanks
Try this
Planet Indigo said:
Has anyone here rooted this tablet with Magisk?
Any very detailed step by step guide somewhere with links to the specific files to download for this tablet? (It'd be great if it didnt't require a PC but even if it does, I'd really appreciate a detailed step by step guide to put Magisk on this tablet)
Thanks
Click to expand...
Click to collapse
Hi there,
I wouldnt't use Magisk on your device as it might softbrick your drive
So use KINGOROOT.
THE STEPS ARE VERY EASY TO FOLLOW.
https://www.kingoapp.com/
Regards,
KIBS2173
KIBS2173 said:
Hi there,
I wouldnt't use Magisk on your device as it might softbrick your drive
So use KINGOROOT.
THE STEPS ARE VERY EASY TO FOLLOW.
https://www.kingoapp.com/
Regards,
KIBS2173
Click to expand...
Click to collapse
Why would Magisk be more risky than Kingoroot on this device? I liked the idea of Magisk because it is systemless root and it is easier to hide from some apps.
Can Kingoroot one click root apk even root a Teclast M16 running android 8?
For M16, there is no root at all yet. I look forward to it myself, but so far there is nothing ....
Planet Indigo said:
Why would Magisk be more risky than Kingoroot on this device? I liked the idea of Magisk because it is systemless root and it is easier to hide from some apps.
Can Kingoroot one click root apk even root a Teclast M16 running android 8?
Click to expand...
Click to collapse
Hi there,
I tried Magisk on a chinese phone, and after flashing the software, the phone just went into black screen and soft-bricking the whole phone, the phone works in the background but the screen is black. And KINGOROOT will not flash anything into your device.
Regards
KIBS2173
Karamarov1 said:
For M16, there is no root at all yet. I look forward to it myself, but so far there is nothing ....
Click to expand...
Click to collapse
So you have the tablet yourself and no luck with anything?
I can't seem to find anything on the net about rooting this tablet, it's weird too since it "only" has android 8, not the latest android versions. I sure hope Magisk or another root method is going to be developed soon because I'm really interested in that tablet model.
KIBS2173 said:
Hi there,
I tried Magisk on a chinese phone, and after flashing the software, the phone just went into black screen and soft-bricking the whole phone, the phone works in the background but the screen is black. And KINGOROOT will not flash anything into your device.
Regards
KIBS2173
Click to expand...
Click to collapse
I heard from another forum user who has the Teclast M16 and he said that Kingoroot didn't work on it.
Try this
Planet Indigo said:
So you have the tablet yourself and no luck with anything?
I can't seem to find anything on the net about rooting this tablet, it's weird too since it "only" has android 8, not the latest android versions. I sure hope Magisk or another root method is going to be developed soon because I'm really interested in that tablet model.
I heard from another forum user who has the Teclast M16 and he said that Kingoroot didn't work on it.
Click to expand...
Click to collapse
Hi there,
So i was researching more about this tablet, turns out you can root by installing a custom recovery (TWRP) and from there you can install SUPERSU to achieve root for your tablet. I am not sure if this method works, but if your able to get the stock firmware and the stock recovery and the software to flash the firmware i think you might as well go ahead using that method.
THIS IS THE ARTICLE I FOUND ONLINE :
https://www.getdroidtips.com/how-to-install-twrp-recovery-on-teclast-t30-and-root-it-easily/
*MAKE SURE YOU FIND OUT IF THIS TABLET HAS A TWRP RECOVERY BEFORE DOING ANYTHING ELSE*
Thank you for looking into it, unfortunately that guide is for the Teclast T30 and the guy advises to only use it for that model. I don't own that tablet yet so I can't try any of the steps myself but I'm very interested in this particular model (16/9 ratio, hdmi out, dc charger in, etc...) so I was really hoping to find a tested working method to root it before I go ahead and purchase it.
i found this: https://www.getdroidtips.com/root-teclast-m16/
I rooted my Teclast M16 using Magisk. Simply unlocked the bootloader through adb/fastboot commands, then have magisk manager patch the boot image from firmware download and then flash it using adb/fastboot command line fastboot flash boot magisk_patched_boot.img reboot system and its rooted.
I haven't found a twrp recovery yet, but I'm thinking about trying my hand at building my own, despite being a noob.
I can confirm
install adb fast boot
Enable USB debugging and OEM Unlock on your Android device.
adb reboot bootloader
fastboot flashing unlock
Volume up
fastboot reboot
Wait a few minutes to reinstall
enable usb debugging again
download firmware
you will finde a google spreadsheet on the facebook page of telcast
Copy boot.img on the device
install magisk manager via apk
install magisk via patch boot.img in download folder
download patched boot.img
patch device
adb reboot-bootloader
fastboot flash boot magisk_patched_boot.img
fastboot reboot
M16(M6P2)_Android 8.0_V1.07_SZ
boot.img httpx://mirr.re/d/2wHd
full httpx://mirrorace.com/m/1Ek3z httpx://mirr.re/d/2wHj
Hi. Have you got you on working twrp recoberto?
fdsafggg said:
I can confirm
install adb fast boot
Enable USB debugging and OEM Unlock on your Android device.
adb reboot bootloader
fastboot flashing unlock
Volume up
fastboot reboot
Wait a few minutes to reinstall
enable usb debugging again
download firmware
you will finde a google spreadsheet on the facebook page of telcast
Copy boot.img on the device
install magisk manager via apk
install magisk via patch boot.img in download folder
download patched boot.img
patch device
adb reboot-bootloader
fastboot flash boot magisk_patched_boot.img
fastboot reboot
M16(M6P2)_Android 8.0_V1.07_SZ
boot.img httpx://mirr.re/d/2wHd
full httpx://mirrorace.com/m/1Ek3z httpx://mirr.re/d/2wHj
Click to expand...
Click to collapse
Hi.
I tried to unlock the bootloader .
adb devices command shows the m16.
I send the command "adb reboot bootloader" - the device enter in bootloader.
next I send the command "fastboot devices" and I get this:
PS E:\modified_fastboot> fastboot devices
???????????? fastboot
any help to make fast boot see the device?
Thank you
dcoelho said:
Cześć.
Próbowałem odblokować bootloader.
Polecenie urządzeń adb pokazuje m16.
Wysyłam polecenie "adb reboot bootloader" - urządzenie wchodzi w bootloader.
następnie wysyłam polecenie „urządzenia fastboot” i otrzymuję to:
PS E:\modified_fastboot> urządzenia fastboot
???????????? szybki start
jakakolwiek pomoc, aby szybki rozruch zobaczył urządzenie?
Dziękuję Ci
Click to expand...
Click to collapse
Hi, You bad comand when bootloader. When bootloader after comand: " fastboot oem unlock" , luck on skreen, push volume up, wait moment, after next comand:"fastboot reboot". After this command, the tablet will reset to factory settings with unlocked bootloader.
Hello everyone. I have TWRP for M16, everything is almost fine, after uploading it normally work on M16, except for touch not working, I did not check if it works with the mouse. Maybe someone will find it to correct it so that the touch works? I upload the file, it may be useful to someone. Regards RW
reupload boot.img