Please Recommend working USB OTG adapter for Poco F1 8-256 variant.
I have searched on the internet and found that MIUI-11 does support otg.
So it is only the matter of purchasing the right otg adapter.
I want to connect mostly pendrives only (FAT32 & exFAT) to backup data from my Poco F1.
So if any of you purchased an adapter that works please share that link here so that me and other users can benifit from it. :fingers-crossed:
Thanks in Advance :highfive:
Cheers :good:
iamsuperuser said:
Please Recommend working USB OTG adapter for Poco F1 8-256 variant.
I have searched on the internet and found that MIUI-11 does support otg.
So it is only the matter of purchasing the right otg adapter.
I want to connect mostly pendrives only (FAT32 & exFAT) to backup data from my Poco F1.
So if any of you purchased an adapter that works please share that link here so that me and other users can benifit from it. :fingers-crossed:
Thanks in Advance :highfive:
Cheers :good:
Click to expand...
Click to collapse
e.g the one from Anker works For me (11.0.4 Q MIUI)
amazon.com/-/de/dp/B01COOQIKU/ref=mp_s_a_1_3?keywords=anker+usb+otg&qid=1581509497&sr=8-3
iamsuperuser said:
Please Recommend working USB OTG adapter for Poco F1 8-256 variant.
I have searched on the internet and found that MIUI-11 does support otg.
So it is only the matter of purchasing the right otg adapter.
I want to connect mostly pendrives only (FAT32 & exFAT) to backup data from my Poco F1.
So if any of you purchased an adapter that works please share that link here so that me and other users can benifit from it. :fingers-crossed:
Thanks in Advance :highfive:
Cheers :good:
Click to expand...
Click to collapse
I've been using OTG on my poco since day one. Just bought a Type-C OTG and didn't had to configure anything.
For NTFS you'll need paragon NTFS drivers app.
You'll get USB 2.0 speeds on flash drives but external drives work slow (mine was 2 tb WD)
Off-Topic...
MasterFURQAN said:
I've been using OTG on my poco since day one. Just bought a Type-C OTG and didn't had to configure anything.
For NTFS you'll need paragon NTFS drivers app.
You'll get USB 2.0 speeds on flash drives but external drives work slow (mine was 2 tb WD)
Click to expand...
Click to collapse
Thanks I bought the MIVI OTG adapter from flipkart and it works flawlessly.
So an off-topic question...
I'm trying to add the pen drive connected to my router via
Mi File Manager>Remote>Add Remote Device>[SMB]LAN on my brand new Poco F1 8/256
But my pendrive is not getting detected while scanning. I tried different pendrives, but none of them are getting detected.
I tried using MiXplorer, didnt get detected in this as well.
Do I need to enable some settings or permissions??
Can you please help me with this??
iamsuperuser said:
Thanks I bought the MIVI OTG adapter from flipkart and it works flawlessly.
So an off-topic question...
I'm trying to add the pen drive connected to my router via
Mi File Manager>Remote>Add Remote Device>[SMB]LAN on my brand new Poco F1 8/256
But my pendrive is not getting detected while scanning. I tried different pendrives, but none of them are getting detected.
I tried using MiXplorer, didnt get detected in this as well.
Do I need to enable some settings or permissions??
Can you please help me with this??
Click to expand...
Click to collapse
I don't use the built in mi file explorer for SMB. I use xplore. Search it on play store and it always works for me.
?
Related
I have Sony Xperia U.. Rooted
I bought OTG cable & Connected USB ... USB Read Fines On FAT32 On My Mobile..
But Its does Not Supporting NTFS ?
Weither Any Way Does It Supports NTFS ?
Waiting For ur Reply
Thank You,
Xperia U does not support NTFS File System on Native OTG. only FAT and FAT32.
u have 2 flash a kernel that supports ntfs. check the dev forum. there is one out..
I have Flashed Kernel That Supports NTFS Which has Released By Speed
But Then Also Its Not Working !!
Help Me Out !!
OTG does not work
I have just bought a xperia u (st25i)
I have tested different OTG cables but non of them works.
in the storage menu USB storage options are not active.
the phone is manufactured in April 2012. the OS is android 2.3.7
I do not want to loose the warranty so I have not tried to root it.
should it be necessarily be rooted? or I should just try to find the proper OTG cable?
haly67 said:
I have just bought a xperia u (st25i)
I have tested different OTG cables but non of them works.
in the storage menu USB storage options are not active.
the phone is manufactured in April 2012. the OS is android 2.3.7
I do not want to loose the warranty so I have not tried to root it.
should it be necessarily be rooted? or I should just try to find the proper OTG cable?
Click to expand...
Click to collapse
Your cable is probably wrong. If you have another device and the same cable works there, apply for RMA.
I got cable today too, and at first I thought it didn't work. After reboot I connected 16GB MS with power consumption error, so I tried a 4GB MS and it worked. Looks like I need a new memory stick or a separate powered hub between OTG cable and ms
Sent from my ST25i using Tapatalk 2
It Works
K900 said:
Your cable is probably wrong. If you have another device and the same cable works there, apply for RMA.
Click to expand...
Click to collapse
I found a working kable. it is originaly provided for samsung but works on my Xperia U.
I was able to attach a usb hub and connect mouse and cool disk and all works fine.
Same problem
I too had this same problem. When i insert NTFS pendrive it prompt for format pendrive.
Dear Friends,
please do not have somebody tried 64GB USB flash drive on this phone?
CyberCodeDroid said:
Dear Friends,
please do not have somebody tried 64GB USB flash drive on this phone?
Click to expand...
Click to collapse
I tried 64GB kingston otg USB Flash and worked good.
CyberCodeDroid said:
Dear Friends,
please do not have somebody tried 64GB USB flash drive on this phone?
Click to expand...
Click to collapse
I am using 128 gb pendrive via otg on lg g3 and its working without any issues
A 128 gigabytes, please do not experience anyone? And I ask even to an external drive with power, you do not have anyone tried?
CyberCodeDroid said:
A 128 gigabytes, please do not experience anyone? And I ask even to an external drive with power, you do not have anyone tried?
Click to expand...
Click to collapse
man your english is damn hard to understand.you asked is 64 gb pendrive via otg works or not right?i answered you by saying yes it does and it even supports 128 gb pendrive via otg so what are you saying again??
CyberCodeDroid said:
A 128 gigabytes, please do not experience anyone? And I ask even to an external drive with power, you do not have anyone tried?
Click to expand...
Click to collapse
Any otg drive will work size does not matter. Also externally powered hdds work fine. Only issue would be file system types that are not supported by your current rom.
jokerpappu Sorry, translated by Google. (I can read - Badly I wrote a second inquiry)
cidxtc Thanks for explaining!
Resolved, I bought 2x128GB USB Flash Disk.
Hi all,
I have bought, Redmi Note 3 SD 2GB.
But tried to connect my WD 2TB external hard drive using OTG Cable, and only the white led is shown, but was not showing the hard drive contents.
Please somebody help me sort out the issue.
Would deeply appreciate help!!!
Mine can't read NTFS partitions.
Try different file explorer, miui one does not support ntfs for me but es explorer do.
gohan456 said:
Try different file explorer, miui one does not support ntfs for me but es explorer do.
Click to expand...
Click to collapse
Bro
I am using X-plore and built in file manager... But it does not show drive contents.
Notification is seen "Unsupported file format"
Finally, no option to open the 2tb hard disk in redmi note 3.
I tried the es explorer also.
Admin plz close the thread
Lol it's not about wether the file manger supports NTFS.. the device kernal has to.. and Redmi note 3 kernal does support NTFS for otg.. but 2gb hard disk iam not sure wether it will get adequate power from the otg cable to run
filthyrich77 said:
Lol it's not about wether the file manger supports NTFS.. the device kernal has to.. and Redmi note 3 kernal does support NTFS for otg.. but 2gb hard disk iam not sure wether it will get adequate power from the otg cable to run
Click to expand...
Click to collapse
well but the built in file manager still doesn't support it, I wanted to be sure.
for me works a 500gb drive without external and a 2tb with external power. could be a power issue if its without external
Doesn't the device have to support OTG? I never saw the note 3 to be advertised to support that.
2tb its a heavy load and redmi note 3 did not support admin please close this thread
Lenovo hard drive 1 Tb
Hello friends.. Today I have same issue for connecting hard drive to redmi note 3. But I tried lots of app but t doesn't work out. Thank god at last USB OTG File Manger work out for me..
Rajish86 said:
Hello friends.. Today I have same issue for connecting hard drive to redmi note 3. But I tried lots of app but t doesn't work out. Thank god at last USB OTG File Manger work out for me..
Click to expand...
Click to collapse
Mine work with custom rom
Thread is old but: - Stickmount plus maybe Radon Kernel will allow access to NTFS Drives.
As long as the phone can power the drive or the drive has it's own power.
Not sure if Radon is needed but that is my setup!
iluvn73 said:
Finally, no option to open the 2tb hard disk in redmi note 3.
I tried the es explorer also.
Admin plz close the thread
Click to expand...
Click to collapse
There is an option root ur device and flash radon kernel or supports read and write of ntfs partitions
Hi
I just want to connect my external hard drive (usb) to my poco f1 but the android system or MIUI doesn't recognize the hard as suitable DISK and asks me to format it before i can use it on my phone.
Can anyone help?
Quite likely that the HDD is formatted as NTFS which AFAIK isn't supported by MIUI. You can format the HDD as FAT32( max. file size limited to 4GB) or flash a custom kernel which could enable NTFS support.
amn1987 said:
Quite likely that the HDD is formatted as NTFS which AFAIK isn't supported by MIUI. You can format the HDD as FAT32( max. file size limited to 4GB) or flash a custom kernel which could enable NTFS support.
Click to expand...
Click to collapse
No their is must be a way to get this work I am already find way to Successfully connect the HDD to the phone but it's too slow i need something faster and easier than it
Zeko Ronaldo said:
No their is must be a way to get this work I am already find way to Successfully connect the HDD to the phone but it's too slow i need something faster and easier than it
Click to expand...
Click to collapse
The USB Type C port is limited to USB 2.0 only. Plus for handling larger capacity(3/4TB or higher) drives a powerbank is needed.
amn1987 said:
The USB Type C port is limited to USB 2.0 only. Plus for handling larger capacity(3/4TB or higher) drives a powerbank is needed.
Click to expand...
Click to collapse
Ok, thanks i got it, that's why it's very slow with me,
It's usb type c issue, right
I was thinking that the problem is with the MIUI version or the OS support to this, especially that i try the same HDD and same OTG connector on REDMI NOTE 8 PRO based on Android 10 and it was working normally without 3rd party apps or any external apps... Am I right? ?
Zeko Ronaldo said:
Ok, thanks i got it, that's why it's very slow with me,
It's usb type c issue, right
I was thinking that the problem is with the MIUI version or the OS support to this, especially that i try the same HDD and same OTG connector on REDMI NOTE 8 PRO based on Android 10 and it was working normally without 3rd party apps or any external apps... Am I right?
Click to expand...
Click to collapse
How slow is it exactly? USB 2 is good enough for 35MB/s.
Type C can be USB 3. 1 as well like in Oneplus 7 series. And in Redmi Note 8 Pro its USB 2.0.
Poco F1 isn't very good when it comes to self-powering high capacity ext. HDDs. Anything over 2TB likely needs a powered USB hub. In my old Redmi Note 3 and Redmi 3s I can easily power 4TB drives even.
amn1987 said:
How slow is it exactly? USB 2 is good enough for 35MB/s.
Type C can be USB 3. 1 as well like in Oneplus 7 series. And in Redmi Note 8 Pro its USB 2.0.
Poco F1 isn't very good when it comes to self-powering high capacity ext. HDDs. Anything over 2TB likely needs a powered USB hub. In my old Redmi Note 3 and Redmi 3s I can easily power 4TB drives even.
Click to expand...
Click to collapse
Then what's wrong with my device?
can you figure it out, can u help?!
I don't know the exact speed (kb/s) is, because the app i used doesn't show the speed indicator i attached to u its pic.
And i tried another app (ex/fat ntfs paragon software with total commander app) and it was the same speed, it's very slow.
For example, video (2gb) takes more than 10 or 20 min to completely transferred from HDD TO my POCO F1
MY EXT. HDD IS 1TB ONLY?
Pls can u tell what can i do more?
THX FOR YOUR HELP
MLUSB
MLUSB
Were these issues also present on MIUI based on Android 9 or only arose after upgrading to Android 10? I have been using custom ROMs right from day one. In crDroid 5.9 based on Android 9 there was no issue but in crDroid 6.4 based on Android 10 from what I can see USB 3 devices suffer from very low transfer speeds 0.5MB/s whereas in USB 2 devices transfer speeds are as expected(8-18MB/s). I checked in my PC as well and USB 3 devices are in the range 30-140MB/s.
Could you check with a USB 2 drive?
amn1987 said:
Were these issues also present on MIUI based on Android 9 or only arose after upgrading to Android 10? I have been using custom ROMs right from day one. In crDroid 5.9 based on Android 9 there was no issue but in crDroid 6.4 based on Android 10 from what I can see USB 3 devices suffer from very low transfer speeds 0.5MB/s whereas in USB 2 devices transfer speeds are as expected(8-18MB/s). I checked in my PC as well and USB 3 devices are in the range 30-140MB/s.
Could you check with a USB 2 drive?
Click to expand...
Click to collapse
No, but I didn't update my device. am still on Android 9 MIUI V 11.0.5
and their is no issues with my device when i transfer data from pc with the original USB CABLE, the speed is very good ranging between (7-20MB/s)..
The problem only when i use HDD as OTG USB.
hint"i told u that i try the same HDD with same OTG connector on my friend device (redmi note pro, global stable ROM based on Android 10) and it was working normally with good transfer speed".
that's it.
I don't know. On crDroid Pie I had no issue. Maybe try a custom kernel or just bulk transfer stuff from the HDD via PC over MTP.
amn1987 said:
I don't know. On crDroid Pie I had no issue. Maybe try a custom kernel or just bulk transfer stuff from the HDD via PC over MTP.
Click to expand...
Click to collapse
Ok, thanks for your kindness and support
But, i can't use pc for the moment that's why am using OTG, I will try other possible ways to get best results.
Zeko Ronaldo said:
Ok, thanks for your kindness and support
But, i can't use pc for the moment that's why am using OTG, I will try other possible ways to get best results.
Click to expand...
Click to collapse
Is your issue solved?I updated to crDroid 6.7 today and transfer speeds over USB OTG are as expected. For USB 3.0 ext. HDDs. But in one USB3 pen drive speeds are still abysmally low. Just an exception as I tested multiple HDDs and it was fine. Copying to HDDs fluctuated between 15-25MB/s(avg. ~20MB/s) but copying to internal storage from HDDs was better at ~32MB/s.
Zeko Ronaldo said:
No, but I didn't update my device. am still on Android 9 MIUI V 11.0.5
and their is no issues with my device when i transfer data from pc with the original USB CABLE, the speed is very good ranging between (7-20MB/s)..
The problem only when i use HDD as OTG USB.
hint"i told u that i try the same HDD with same OTG connector on my friend device (redmi note pro, global stable ROM based on Android 10) and it was working normally with good transfer speed".
that's it.
Click to expand...
Click to collapse
Currently on latest MIUI 12 Rom 11.0.8 and mine works wel. Using external HDD. No format whatsoever
Hello everyone. My POCO F1 is not detecting OTG USB but keyboard and mouse work.
USB Fat32 type but not detected, Is there a solution to this?
Did you tried exfat?
MeizuM6T said:
Hello everyone. My POCO F1 is not detecting OTG USB but keyboard and mouse work.
USB Fat32 type but not detected, Is there a solution to this?
Click to expand...
Click to collapse
Have you tried a different adapter? I had the exact same thing and another adapter worked great.
Emo19 said:
Did you tried exfat?
Click to expand...
Click to collapse
doesn't see any filesystems
dreamdrake said:
Have you tried a different adapter? I had the exact same thing and another adapter worked great.
Click to expand...
Click to collapse
I haven't tried it, but if there is a problem with the adapter, the masue or the keyboard will not work, right?