Dear Friends,
please do not have somebody tried 64GB USB flash drive on this phone?
CyberCodeDroid said:
Dear Friends,
please do not have somebody tried 64GB USB flash drive on this phone?
Click to expand...
Click to collapse
I tried 64GB kingston otg USB Flash and worked good.
CyberCodeDroid said:
Dear Friends,
please do not have somebody tried 64GB USB flash drive on this phone?
Click to expand...
Click to collapse
I am using 128 gb pendrive via otg on lg g3 and its working without any issues
A 128 gigabytes, please do not experience anyone? And I ask even to an external drive with power, you do not have anyone tried?
CyberCodeDroid said:
A 128 gigabytes, please do not experience anyone? And I ask even to an external drive with power, you do not have anyone tried?
Click to expand...
Click to collapse
man your english is damn hard to understand.you asked is 64 gb pendrive via otg works or not right?i answered you by saying yes it does and it even supports 128 gb pendrive via otg so what are you saying again??
CyberCodeDroid said:
A 128 gigabytes, please do not experience anyone? And I ask even to an external drive with power, you do not have anyone tried?
Click to expand...
Click to collapse
Any otg drive will work size does not matter. Also externally powered hdds work fine. Only issue would be file system types that are not supported by your current rom.
jokerpappu Sorry, translated by Google. (I can read - Badly I wrote a second inquiry)
cidxtc Thanks for explaining!
Resolved, I bought 2x128GB USB Flash Disk.
Related
after i fortmated A70IT (use Reformat Device in Boot menu), it cannot connect to PC. So i can't copy firmware to upgrade.
Pls help me, how can connect A70IT to PC?
Thanks all.
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
msticninja said:
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
Click to expand...
Click to collapse
yes. Sometime, show the warning request fortmat Disc I: ( disc of A70) but can't format it. The warning only show in few second and then disappear.
Having trouble with the translation. If you can still get into the Boot Menu, but the ram disk doesn't show up when you select Update Firmware, it sounds like there's some hardware trouble. I'd try to contact support. Someone else may have some ideas, as well.
Thanks all, i found my problem. The cable was broken so i bought the new cable. it's ok.
I installed SDE, UrukDroid 1.0 successfull.
Now, it can not read the SDcard, who can help me this problem?
fgc_vn said:
Now, it can not read the SDcard, who can help me this problem?
Click to expand...
Click to collapse
Does the card works on your pc?
if yes, reformat it and try it on your archos.
if no, your card is propably broken..
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
Don't format NTFS, it's not supported on every FW version. Make sure the partition table in MS-DOS type, and make sure the storage scheme on the A70 is set to Fat, not Ext3.
fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
So the usb ports are definitley working, must be card?
davemon said:
So the usb ports are definitley working, must be card?
Click to expand...
Click to collapse
Usb ports? We're talking about the SD Card slot I thought...
could we format the Xperia S internal memory to ext4 or exFat for bigger files size?
and how to do that?
currently i perform recording full HD and it stop with file size 3,78Gb (27min17sec)
i am a newbie
Not that easily. It's possible though.
K900 said:
Not that easily. It's possible though.
Click to expand...
Click to collapse
use a USB flash drive and format it as exFAT or ext4. then use a OTG cable to connect the USB to the phone.
then check if the phone recognize the USB flash drive or not??
but currently i dont have the OTG cable, any one help me figures out?
khanhj said:
use a USB flash drive and format it as exFAT or ext4. then use a OTG cable to connect the USB to the phone.
then check if the phone recognize the USB flash drive or not??
but currently i dont have the OTG cable, any one help me figures out?
Click to expand...
Click to collapse
You can enable it in the kernel. It does work, but not for internal storage. Things need to be changed in the firmware. Wait for AOKP nozomi_lvm builds.
K900 said:
You can enable it in the kernel. It does work, but not for internal storage. Things need to be changed in the firmware. Wait for AOKP nozomi_lvm builds.
Click to expand...
Click to collapse
hope this work, i'm searching this build now.
thanks for your reply
khanhj said:
hope this work, i'm searching this build now.
thanks for your reply
Click to expand...
Click to collapse
It's not out yet.
K900 said:
It's not out yet.
Click to expand...
Click to collapse
hope krabappel2548 make this in his new kernel Sspeed
K900 said:
It's not out yet.
Click to expand...
Click to collapse
please help ask them add this to their kernel, im currently not enough post to leave a reply in Dev topic
Hi!
i have a bug...
USB Pendrive via OTG: fully working, but SD card reader with micro SD: wrong work.
Long file copy is impossible...error:
"The usb storage is unexpectedly removed!"
why?
no errors in otg with pendrive!
sorry for bad english!
current versions:
rom: simplistic jb (stock xxlsj 4.1.2)
kernel: jeboo v1.3b for xxlsj
WreeD-X said:
Hi!
i have a bug...
USB Pendrive via OTG: fully working, but SD card reader with micro SD: wrong work.
Long file copy is impossible...error:
"The usb storage is unexpectedly removed!"
why?
no errors in otg with pendrive!
sorry for bad english!
current versions:
rom: simplistic jb (stock xxlsj 4.1.2)
kernel: jeboo v1.3b for xxlsj
Click to expand...
Click to collapse
Firstly, it might be possible that your phone doesn't have the required drivers of the card reader....I too had the same problem once when i connected a local china card reader to my phone via OTG, it didn't work at all...just the light was blinking..
Then I tried an iball card reader with the same memory card...it worked perfectly..
Remember that our OTG doesn't support reading ntfs file system type...you'll need an app for that...make sure the mmc you're using is FAT32..
Whereas for that "removed unexpectedly"...Which OTG cord are you using???
Is it the official Samsung OTG?? Or you purchased just something from eBay..
Coz I had bought 2-3 via eBay, every piece gave the same problem...but the official one didn't...So try out the official OTG once and tell whether you experience the same problem or not..
Press thanx if i helped..
Thx!
Thus, the system is not to blame, but the OTG cable is bad? I just don't understand, why the pendrive works perfectly ...
WreeD-X said:
Thx!
Thus, the system is not to blame, but the OTG cable is bad? I just don't understand, why the pendrive works perfectly ...
Click to expand...
Click to collapse
Here's an example - I live next to a small road. I can drive on it to work and back home in my car just fine, but an 18-wheeler couldn't.
Sent from my digital submersible hovercraft.
WreeD-X said:
Thx!
Thus, the system is not to blame, but the OTG cable is bad? I just don't understand, why the pendrive works perfectly ...
Click to expand...
Click to collapse
Well...even if its not the official one...its a good copy of it, the hardware structure of these otg's are similar to that of the official ones... else it wouldn't work properly nor anyone would buy it (ofcourse they made usable/functional otgz which would sell and be cheap for everyone)..
Simply to put it its a temporary otg which people buy to check out how good and useful the function of otg is to them.... If they're using it pretty frequently then they should go and buy the original one. ..if not then its just another accessory of the phone kept worth you for emergency times. ...
Try and see whether the problem still persists with the original otg and post...
Watch this Full Tutorial : https://www.youtube.com/watch?v=j3lGbgRJflo
Download Material :-
IMGTools.zip : https://mega.nz/#!dpVFhJoB!2d4PCwnsmEgfskzd3oOXbEyN0J9UXIv4ztNxG3JZLds
Commands text file: https://www.dropbox.com/s/jlcxiqm8vsqlsz6/Commands_DataSize_RemixOS.txt?dl=0 OR http://bit.ly/1PiRVB6
Note : This method work on NTFS Format.
For USB
Hey, i'm posting this from my Remix OS 2.0 interface. I watched your tutorial and i don't thing it will work for my situation. I run Ubuntu and these tools are not available that i can find.
Remix is installed on a 16G USB.
When in the OS it reads only 4Gb of the USB.
I bought this thumb drive specifically for the Remix OS so i want to use the whole drive.
Is there a way to increase the volume while using it?
Link is working.....
For using whole drive as internal storage.
Check this my post : http://forum.xda-developers.com/showthread.php?t=3299087
superTard said:
Hey, i'm posting this from my Remix OS 2.0 interface. I watched your tutorial and i don't thing it will work for my situation. I run Ubuntu and these tools are not available that i can find.
Remix is installed on a 16G USB.
When in the OS it reads only 4Gb of the USB.
I bought this thumb drive specifically for the Remix OS so i want to use the whole drive.
Is there a way to increase the volume while using it?
Click to expand...
Click to collapse
Link is working.....
For using whole drive as internal storage.
Check this my post : http://forum.xda-developers.com/showthread.php?t=3299087
Sent from my HM 1S using Tapatalk
kabeerkhan2016 said:
Link is working.....
For using whole drive as internal storage.
Check this my post : http://forum.xda-developers.com/showthread.php?t=3299087
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
Yeah, I read that post and watched the video. It doesn't answer my question.
Can i extend the volume while booted into the Remix OS?
superTard said:
Yeah, I read that post and watched the video. It doesn't answer my question.
Can i extend the volume while booted into the Remix OS?
Click to expand...
Click to collapse
This is not possible to extend your volume while booted into Remix OS
A XDA Member
kabeerkhan2016 said:
Note : This method work on NTFS Format.
Click to expand...
Click to collapse
Great and simple tutorial to follow.
Converted my FAT32 partition to NTFS with EaseUS Partition Master 10.8 and follow the rest of the tutorial ... Internal storage now 16GB
Thanks
So Kabeer, is there a way to use this method for USB booting only as @superTard has said? I have the same request as he does, to boot only from USB but want to use the whole USB partition for space.
joytest said:
So Kabeer, is there a way to use this method for USB booting only as @superTard has said? I have the same request as he does, to boot only from USB but want to use the whole USB partition for space.
Click to expand...
Click to collapse
I'm not tried this method on usb.
I'll Try ASAP, then i reply your answer perfectly.
kabeerkhan2016 said:
I'm not tried this method on usb.
I'll Try ASAP, then i reply your answer perfectly.
Click to expand...
Click to collapse
I've read that you could create an empty data folder in the root directory and then send the grub entry to it with
Data=
In the kernel string...
I'm testing here if this will work (maybe even in an ext4 partition).
Technical said:
I've read that you could create an empty data folder in the root directory and then send the grub entry to it with
Data=
In the kernel string...
I'm testing here if this will work (maybe even in an ext4 partition).
Click to expand...
Click to collapse
This work without ext4 .....
My other tutorial make full partition as a internal storage work with ext4.
A XDA Member
Genius!
I know this is a x86 rom, but I think that rom can be ported to ARM devices. ..
Remix mini PC is quite likely a Samsung S4 and there are Ordroid hardwares, Octacore and very much good to run RemixOs. ..
http://magazine.odroid.com/
My Galaxy Note 3 is able to do a multiboot and that will be great for use it as mobile or HTPC (for exemple) with RemixOs
kabeerkhan2016 said:
I'm not tried this method on usb.
I'll Try ASAP, then i reply your answer perfectly.
Click to expand...
Click to collapse
So, did this work?
I'm running rooted Remix OS off an 32 GB USB-3 flash drive and I would love to use more than 4 GB of it as storage for Remix OS!
Fiksdal said:
So, did this work?
I'm running rooted Remix OS off an 32 GB USB-3 flash drive and I would love to use more than 4 GB of it as storage for Remix OS!
Click to expand...
Click to collapse
i don't know, but you create NTFS format,
this method work on NTFS
kabeerkhan2016 said:
I'm not tried this method on usb.
I'll Try ASAP, then i reply your answer perfectly.
Click to expand...
Click to collapse
kabeerkhan2016 said:
i don't know, but you create NTFS format,
this method work on NTFS
Click to expand...
Click to collapse
So you are saying it will work even with a pendrive?
Have you tried it yourself?
Do I have to do a fresh install or can I use my existing installation pendrive?
Fiksdal said:
So you are saying it will work even with a pendrive?
Have you tried it yourself?
Do I have to do a fresh install or can I use my existing installation pendrive?
Click to expand...
Click to collapse
before create, you make a backup.
and fresh install....
kabeerkhan2016 said:
before create, you make a backup.
and fresh install....
Click to expand...
Click to collapse
OK, but have you tried it on a USB flash drive? And did it work for you on a USB flash drive?
Is the method exactly the same if doing it on a USB flash drive?
Fiksdal said:
OK, but have you tried it on a USB flash drive? And did it work for you on a USB flash drive?
Is the method exactly the same if doing it on a USB flash drive?
Click to expand...
Click to collapse
I'm not try on usb, because this time i have no 3.0 usb but may be work, i'm not sure. I'll try on usb ASAP then i replied your answer correctly. But this time you check own your risk.
A XDA Member
kabeerkhan2016 said:
I'm not try on usb, because this time i have no 3.0 usb but may be work, i'm not sure. I'll try on usb ASAP then i replied your answer correctly. But this time you check own your risk.
A XDA Member
Click to expand...
Click to collapse
Awesome, thanks!
By the way, before I got the USB-3 flash drive, I ran Remix OS from a USB-2 flash drive. It worked just fine. Not as fast as USB-3, but still fine for testing purposes. You might be able to test your method using a USB-2 flash drive.
I'm a bit of a noob, so I think I'll wait until you have tried it to see what you say. By the way, some other guy has come up with another method to accomplish the same thing. But I didn't quite understand his instructions either.
Cheers
Hello,
I believe this is not working with UEFI, right? EasyUefi(2.2) will not let me select an NTFS parition..
Please Recommend working USB OTG adapter for Poco F1 8-256 variant.
I have searched on the internet and found that MIUI-11 does support otg.
So it is only the matter of purchasing the right otg adapter.
I want to connect mostly pendrives only (FAT32 & exFAT) to backup data from my Poco F1.
So if any of you purchased an adapter that works please share that link here so that me and other users can benifit from it. :fingers-crossed:
Thanks in Advance :highfive:
Cheers :good:
iamsuperuser said:
Please Recommend working USB OTG adapter for Poco F1 8-256 variant.
I have searched on the internet and found that MIUI-11 does support otg.
So it is only the matter of purchasing the right otg adapter.
I want to connect mostly pendrives only (FAT32 & exFAT) to backup data from my Poco F1.
So if any of you purchased an adapter that works please share that link here so that me and other users can benifit from it. :fingers-crossed:
Thanks in Advance :highfive:
Cheers :good:
Click to expand...
Click to collapse
e.g the one from Anker works For me (11.0.4 Q MIUI)
amazon.com/-/de/dp/B01COOQIKU/ref=mp_s_a_1_3?keywords=anker+usb+otg&qid=1581509497&sr=8-3
iamsuperuser said:
Please Recommend working USB OTG adapter for Poco F1 8-256 variant.
I have searched on the internet and found that MIUI-11 does support otg.
So it is only the matter of purchasing the right otg adapter.
I want to connect mostly pendrives only (FAT32 & exFAT) to backup data from my Poco F1.
So if any of you purchased an adapter that works please share that link here so that me and other users can benifit from it. :fingers-crossed:
Thanks in Advance :highfive:
Cheers :good:
Click to expand...
Click to collapse
I've been using OTG on my poco since day one. Just bought a Type-C OTG and didn't had to configure anything.
For NTFS you'll need paragon NTFS drivers app.
You'll get USB 2.0 speeds on flash drives but external drives work slow (mine was 2 tb WD)
Off-Topic...
MasterFURQAN said:
I've been using OTG on my poco since day one. Just bought a Type-C OTG and didn't had to configure anything.
For NTFS you'll need paragon NTFS drivers app.
You'll get USB 2.0 speeds on flash drives but external drives work slow (mine was 2 tb WD)
Click to expand...
Click to collapse
Thanks I bought the MIVI OTG adapter from flipkart and it works flawlessly.
So an off-topic question...
I'm trying to add the pen drive connected to my router via
Mi File Manager>Remote>Add Remote Device>[SMB]LAN on my brand new Poco F1 8/256
But my pendrive is not getting detected while scanning. I tried different pendrives, but none of them are getting detected.
I tried using MiXplorer, didnt get detected in this as well.
Do I need to enable some settings or permissions??
Can you please help me with this??
iamsuperuser said:
Thanks I bought the MIVI OTG adapter from flipkart and it works flawlessly.
So an off-topic question...
I'm trying to add the pen drive connected to my router via
Mi File Manager>Remote>Add Remote Device>[SMB]LAN on my brand new Poco F1 8/256
But my pendrive is not getting detected while scanning. I tried different pendrives, but none of them are getting detected.
I tried using MiXplorer, didnt get detected in this as well.
Do I need to enable some settings or permissions??
Can you please help me with this??
Click to expand...
Click to collapse
I don't use the built in mi file explorer for SMB. I use xplore. Search it on play store and it always works for me.
?