Hello,
I just received my Stratos English Version and was trying to sync my activity with Strava. The Accounts are linked into the Amazfit Watch App, but no sync happen. I tried with Walk, Run, nothing happen.
I also tried to pair MiFit App with Amazfit Watch, but also, nothing happen, it simply opens Amazfit Watch app and no pairing is happening.
I wanted this pair to be able to sync Steps with Apple health. I read that on the pace, the firmware needed to be Chinese ?
Thanks in advance
So I solved one of the 2 problems ..... I saw that my 2 IDs were different in Mi fit and amazfit, so I created account again this time with google sign in. I have the same account ID on both apps.
The sync to Strava is working, but I still cannot pair with Mifit ....
You will not be able to pair International version with MiFit. Only Chinese version pairs with MiFit, but it does not have Strava.
is there a way to extract and sync steps with apple health on the international version ?
I have my Pace synced with both MiFit and Amazfit international versions, I've used a Google account as well. You may need to activate apps listing to fire up "BLE connect" to show the QR code to pair without reseting the watch (unpairing in Amazfit app will reset the watch). Or, if doesn't work, install the Chinese version to pair watch, then remove, then go to international version again (may be complicated on iOS, I did this on Android).
when I put the chinese version of amazfit, it cannot read the QR Code .... it put always scan failed
lfom said:
IYou may need to activate apps listing to fire up "BLE connect" to show the QR code to pair without reseting the watch .
Click to expand...
Click to collapse
How do you do this ?
chocorem said:
How do you do this ?
Click to expand...
Click to collapse
There are apps and tutorials about it elsewhere, but basically you push an empty text file named "launcher_config.ini" to /sdcard/ on watch. You can also use a third party launcher as QuickLauncher as well, or any other method to open the app, of course.
lfom said:
There are apps and tutorials about it elsewhere, but basically you push an empty text file named "launcher_config.ini" to /sdcard/ on watch. You can also use a third party launcher as QuickLauncher as well, or any other method to open the app, of course.
Click to expand...
Click to collapse
I think it is different on the stratos, because I cannot see a sd card folder on the watch
lfom said:
I have my Pace synced with both MiFit and Amazfit international versions, I've used a Google account as well. You may need to activate apps listing to fire up "BLE connect" to show the QR code to pair without reseting the watch (unpairing in Amazfit app will reset the watch). Or, if doesn't work, install the Chinese version to pair watch, then remove, then go to international version again (may be complicated on iOS, I did this on Android).
Click to expand...
Click to collapse
But the main problem comes from the fact that I cannot scan the QR Code from the Chinese version of amazfit ....
chocorem said:
But the main problem comes from the fact that I cannot scan the QR Code from the Chinese version of amazfit ....
Click to expand...
Click to collapse
Even with a different account and/or after resetting the watch?
Yes, I log in the International version with Google, in the chinese version I have a xiaomi Account with a different User ID.
I tried to reset the watch, delete the bluetooth profile in the phone.does not matter, always a pair error.
May be they have disabled the ability to pair an international watch with the chinese amazfit ?
chocorem said:
Yes, I log in the International version with Google, in the chinese version I have a xiaomi Account with a different User ID.
I tried to reset the watch, delete the bluetooth profile in the phone.does not matter, always a pair error.
May be they have disabled the ability to pair an international watch with the chinese amazfit ?
Click to expand...
Click to collapse
I don't know, I have a Pace, but it worked. Try creating a new account for the CN version, sometimes it lets it pair again.
chocorem said:
Yes, I log in the International version with Google, in the chinese version I have a xiaomi Account with a different User ID.
I tried to reset the watch, delete the bluetooth profile in the phone.does not matter, always a pair error.
May be they have disabled the ability to pair an international watch with the chinese amazfit ?
Click to expand...
Click to collapse
Try set the region to China.
Sent from my iPad using Tapatalk
Sorry I forgot to mention this, but I had set the region to China !
on IOS to switch to China version of the Amazfit software, you simply have to switch Region of the iPhone
Hi,
Can you tell me the diameter of the watch ? I can not see this specification nowhere ???
the overall diameter is about 47mm ... If you want one, I can sell you mine, the sport integration is not complete enough for me.... I'm living 80 kms from you
What a shame I ordered one just 4 days ago from AlliExpress
I have also a Fenix3, complete for sport but a little too big for daily use
To Scan the QR Code I had to dowload the Chineese version App on Store. QR code was not detected with the EN/EU version App.
Worked for me English version with English app.
And if so could someone please explain to me how to pair it. Notify and fitness mentions unpairing from the mifit app and only pairing with notify, but when I do this the watch only shows the connect to app icon. I would love to just use notify as mifit and notified seem to fight sometimes.
Yes, you can. I use it all the time and don't have Mi fit installed.
Just click on the menu button (3 lines in top left)
Then in the menu that shows, scroll down to the option: Re-Pair with Amazfit
It will disconnect (if connected) and then pair again with the Amzfit Bip.
Works great and there is less battery loss then with Mi Fit.
Do you pair originally with mifit then uninstall it? When I unpaired with mifit nothing I do in Notify takes the watch off the connect to phone screen. Notify says it's paired but the watch doesn't.
myke66 said:
Do you pair originally with mifit then uninstall it? When I unpaired with mifit nothing I do in Notify takes the watch off the connect to phone screen. Notify says it's paired but the watch doesn't.
Click to expand...
Click to collapse
Yes, i started on my phone with the Mi fit app, but for my wife i never installed Mi fit.
What you can do after unpairing Mi fit, is using N&F and then install the latest firmware.
See here for a description what to do (follow all steps 1 through 5 except the Chinese characters step). The description is for step 5 (GPS), but simply start with 1.
http://forum.mibandnotify.com/discussion/comment/349/#Comment_349
Thank for the replies, unfortunately it's just not working. When I have Mifit uninstalled and paired with Notify, when I try to update the firmware it disconnects from Notify. I can re-pair the watch in Notify but when the firmware update starts its disconnects.
I love the concept of Notify and the custom notifications but I'm about to get a refund on the pro purchase and just use the stock software for consistency.
I tried to uninstall Mi Fit and pair through Notify. The pairing icons wouldn't go away from the watch. It looked like the phone was getting data from the watch, but the watch was not recognizing it was paired. There is a Reddit thread https://www.reddit.com/r/AmazfitBip/comments/8dhyft/do_i_need_to_keep_mi_fit_when_using_another_app/ with other people having this issue. It would be nice to only have to run one app on the phone to cut down on battery usage.
I figured it out. In the notify app, go to settings and under the advanced tab, scroll down to where it says something about the official mi fit app. Select the app isn't installed and your watch should connect to the notify app
Cannot go to the main screen of the app
Hi all,
I have a problem with my amazfit pace.
I have MiFit installed and paired (as well as Amazfit app).
Whn I install Notify and fitness asks me for permissions wich I grant and asks if the watch is correctly paired.
After that I get to a Screen with several app list to activate notifications or not but I'm not able to go to the main page with all the features...
Is this happening to someone else?
Thanks
I would like to say thank you to the devs of this app. I'm a paid user and I have a question. Is there a way to use Notify App for only integration with Sleep as Android? I use the amazfit app as I like their graphs better. Thanks
Howdy all,
Just wondering if any of the Amazfit watches (especially the Bip), will allow you to put a message in with one of the alarms? I have searched high and low but all I can seem to find is that (using the Bip as an example) all you can do is set up to so many alarms, what time, daily/weekly etc but not whether or not you can attach a message like "Go to appointment" with that alarm.
Multiple smartwatch alarms to me seem kind of pointless if you can't remember what they were for.
Thanks,
Trevel14n
I don't know about BIP, but it doesn't work this way with Pace and Stratos. On them, however, you can install third party apps, one of them is TickTick. It has reminders and you can set timed reminders for them, and even sync using WiFi. Interface isn't the best because it was not meant for small screens, but after initial setup basically you will open it just to sync data with wifi when needed. It won't work with BIP because BIP runs a proprietary OS, not Android.
Hi all,
I have a Reno 2Z (Global) with ColorOS 6.1. I have an Amazfit Bip and I'm using the MI Fit application. It is supposed to send some apps notifications to the band. This is not happening. I can confirm that Mi Fit:
1) Can not autostart. (Even when I allowed it with the "Auto-start" option)
2) Is allowed to show notifications.
3) Can show notifications in the lockscreen.
4) Is allowed to have no battery restrictions.
5) Can sync correctly with the band when I open it.
6) Can not receive notifications in the Amazfit bip even with the app open.
Anyone else having same problems? Any suggestions? Thanks in advance.
Hi guys,
So I recently purchased an Amazfit GTS2 watch. I also have the samsung active 2 so I'm testing the functionality of this Amazfit compared to it.
I'm super new and have questions regarding the Zepp app it comes with. When I turn on notifications and receive them for say an email, it just shows as "app notification".... Is thay normal not to specify the specific app the message is coming from and be able to read it??
Also, Zepp is lacking in options so I'm wondering because it's android, are there other apps that perform better? Especially when it comes to allowing specific notification to permissions?
Also where can I download more watchfaces? The ones on the app are lacking.... Is this possible??
Can anyone offer me some help with the above... Please?
Download Modified Zepp 5.9.2 from magical unicorn and your problem will be solved
Modified Zepp 5.9.2 - All in One | GeekDoing
Modified Zepp 5.9.2 ★ One application, all features ★ Features ⤳ Caller ID for messages and calls works with all phone system languages. ⤳ Weather informations in the same language as the phone system language (For all languages). ⤳ Czech weather informations from @MRMR Modified Mi Fit. ⤳ Mi...
geekdoing.com