hi guys
I'm fresh owner of lg v30 before only Samsung devices. I tried do root on my lg v30 but now I have only LG logo (LG V30think) or if I try do hard reset logo changed to LG logo. I tried hard reset, soft reset etc nothing work. When I connect to computer I hear connecting noise but I can't see my devices in my computer. I tried connect to LG Bridge but program can't see my phone. Any idea what I can to do to back my phone to life.:crying::crying::crying:
maziak1980 said:
hi guys
I'm fresh owner of lg v30 before only Samsung devices. I tried do root on my lg v30 but now I have only LG logo (LG V30think) or if I try do hard reset logo changed to LG logo. I tried hard reset, soft reset etc nothing work. phone.
Click to expand...
Click to collapse
Please tell WHAT V30 you have. Saying you have "V30" is like saying you have a "Dell" computer. There's over a dozen variants.
What did you try, to root? Which method? (Depends on which variant your have) What Instructions?
Did you flash correct firmware? Did you use Dev Patched LGUP? What mode did you use?
You've tried Master Reset?
Hi
Thank you for replay. I think I tried every combination to wake up my LG V30. I tried wake up from yesterday and about 30 minutes ago I tried different combination this was only my idea and my phone work. I don't know how I do this. I tried root my phone to get my photos after factory reset
ChazzMatt said:
Please tell WHAT V30 you have. Saying you have "V30" is like saying you have a "Dell" computer. There's over a dozen variants.
What did you try, to root? Which method? (Depends on which variant your have) What Instructions?
Did you flash correct firmware? Did you use Dev Patched LGUP? What mode did you use?
You've tried Master Reset?
Click to expand...
Click to collapse
lg h930
Hi
Thank you for replay. I think I tried every combination to wake up my LG V30. I tried wake up from yesterday and about 30 minutes ago I tried different combination this was only my idea and my phone work. I don't know how I do this. I tried root my phone to get my photos after factory reset
maziak1980 said:
lg h930
Hi
Thank you for replay. I think I tried every combination to wake up my LG V30. I tried wake up from yesterday and about 30 minutes ago I tried different combination this was only my idea and my phone work. I don't know how I do this. I tried root my phone to get my photos after factory reset
Click to expand...
Click to collapse
My questions besides variant (H930, thank you) were what firmware you flashed (if any), did you use Dev Patched LGUP. If you flashed incorrect firmware, that can cause brick, for instance. So, I also wanted to know what Instructions you followed and which step you were on?
For instance, did your brick occur when you flashed firmware? Or did it occur while in ADB and you were trying to give commands to unlock bootloader?
Master Reset -- using buttons:
1. Unplug phone and turn it OFF.
2. Press and hold the Power and Volume down buttons.
3. When the LG logo appears, quickly release the Power button only -- then immediately press Power button again, while STILL pressing the Volume down button until you see the screen to select Yes to erase and reset everything.
4. Release both buttons so you can make your choices.
____________
IF the phone won't turn off, hold the power button by itself for like 2 minutes.
ChazzMatt said:
My questions besides variant (H930, thank you) were what firmware you flashed (if any), did you use Dev Patched LGUP. If you flashed incorrect firmware, that can cause brick, for instance. So, I also wanted to know what Instructions you followed and which step you were on?
For instance, did your brick occur when you flashed firmware? Or did it occur while in ADB and you were trying to give commands to unlock bootloader?
Master Reset -- using buttons:
1. Unplug phone and turn it OFF.
2. Press and hold the Power and Volume down buttons.
3. When the LG logo appears, quickly release the Power button only -- then immediately press Power button again, while STILL pressing the Volume down button until you see the screen to select Yes to erase and reset everything.
4. Release both buttons so you can make your choices.
____________
IF the phone won't turn off, hold the power button by itself for like 2 minutes.
Click to expand...
Click to collapse
Yes I done hard reset. What I done to wake up phone
I hold volume down and power
When logo go on I release power button and when logo come again I swap valume down to volume up and I get message phone reset
For flasboot I used youtube how to get ublock.bin file from LG and after that I tried flash phone using comment on DOS and program ADB. I paste file twrp do ADB folder after last step I blocked my phone. I want get my photos back because by mistake I made a factory reset.
maziak1980 said:
Yes I done hard reset. What I done to wake up phone
I hold volume down and power
When logo go on I release power button and when logo come again I swap valume down to volume up and I get message phone reset
For flasboot I used youtube how to get ublock.bin file from LG and after that I tried flash phone using comment on DOS and program ADB. I paste file twrp do ADB folder after last step I blocked my phone. I want get my photos back because by mistake I made a factory reset.
Click to expand...
Click to collapse
Now I know why you didn't ask this in the WTF Instructions thread. You used LG's "official" bootloader unlock code. I'm sorry I can't help.
THESE are the only instructions you should be using to bootloader unlock and root any V30 (except for T-mobile H932).
WTF V30/V30+/V30S Bootloader Unlock and Root
Everything you needed is in that thread. After temporarily downgrading to early Oreo, unlocking bootloader with OUR code, you also need to flash correct version of TWRP, encryption disabler and root checker disabler files, plus Magisk. Those instructions tell you the exact order, as well as Trouble Shooting Tips.
But LG official bootloader unlock is different. Theoretically you don't need to downgrade, but you are dependent on their code.
Maybe someone else can help. But if Master Reset isn't working, then the LG bootloader unlock code messed up your phone?
ChazzMatt said:
Now I know why you didn't ask this in the WTF Instructions thread. You used LG's "official" bootloader unlock code. I'm sorry I can't help.
THESE are the only instructions you should be using to bootloader unlock and root any V30 (except for T-mobile H932).
WTF V30/V30+/V30S Bootloader Unlock and Root
Everything you needed is in that thread. After temporarily downgrading to early Oreo, unlocking bootloader with OUR code, you also need to flash correct version of TWRP, encryption disabler and root checker disabler files, plus Magisk. Those instructions tell you the exact order, as well as Trouble Shooting Tips.
But LG official bootloader unlock is different. Theoretically you don't need to downgrade, but you are dependent on their code.
Maybe someone else can help. But if Master Reset isn't working, then the LG bootloader unlock code messed up your phone?
Click to expand...
Click to collapse
I have android 9 now update used LG bridge. I have question is any different way to get my photo back after factory reset? I don't want block my phone again I spend a lot of time to get it back to life.
maziak1980 said:
I have android 9 now update used LG bridge. I have question is any different way to get my photo back after factory reset? I don't want block my phone again I spend a lot of time to get it back to life.
Click to expand...
Click to collapse
There are data recovery software, where it scans your phone and tries to recover files in space that has not been overwritten yet.
ChazzMatt said:
There are data recovery software, where it scans your phone and tries to recover files in space that has not been overwritten yet.
Click to expand...
Click to collapse
Hi
There is no way to do this without root phone.
Thank you for all you help
Take care
i just had a very similar issue to this and the master reset somehow resurrected TWRP. @ChazzMatt i owe you big as always.
maziak1980 said:
Hi
There is no way to do this without root phone.
Thank you for all you help
Take care
Click to expand...
Click to collapse
Go to photos.google.com and see if your pictures are there?
I have auto backup for my pictures when my phone connects to any Wi-Fi signal. I don't use cellular data, but I do use free Wi-Fi to back up my pictures.
I've had friends break/lose their phone and forget they had that turned on. They didn't lose anything...
Related
I recently rooted my Lg G stylo (Metro). I was messing around with the Clockwork Mod Recovery. Long story short, I had to reboot into recovery but I keep getting a "Secure Booting Error" "Error code 1003". It keeps restarting over and over again and the same message keeps popping up. The screen doesn't pass the logo, it just shuts down after the error message shows up. repeat
There is no way to access the homescreen or anything. I trying to factory reset by holding the VOLUME DOWN + POWER KEY. It works. I get a menu that says Perform a factory reset , [Yes/NO]. When i click yes, the reset begins but after a while it shuts down and continues to repeat the same message. "Secure booting Error". "Error Code 1003". I have also been able to acces download mode where the screen would say firmware update/Usb. But idk what to do after that. Im pretty sure its not bricked since it still turns on.
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
I have the same problem
mnunez12 said:
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
Click to expand...
Click to collapse
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Did figure how to recover phone?
ProblemMaker said:
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Click to expand...
Click to collapse
i have the same problem
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
FIXED
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
Thanks. I finally fixed it thanks to this!!!!!
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
T mobile kdz file ?
soccereclipse087 said:
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
Click to expand...
Click to collapse
Did you get a answer? Also where can I find the kdz file?
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
botbro86 said:
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
Click to expand...
Click to collapse
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
I actually did GT steps right after this post. Im now back on Katana and learned from my mistakes lol
I accidentally used king root without developer mode enabled
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery. How do I fix this?!?!?!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Micgizel said:
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
Click to expand...
Click to collapse
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery.
What if you cant get the phone to do anything outside of the boot loop?
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
sherryf said:
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
Click to expand...
Click to collapse
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
br0adband said:
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
Click to expand...
Click to collapse
Thank you so much for responding to me even though you couldnt help. . i appreciate that..
is there a way to fix it
arbyn said:
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
Click to expand...
Click to collapse
Sorry for the bump on this thread. I followed the unbrick guide mentioned here, and all seems like a GO... except a lost service. Screen Lock says "No Service", but I am receiving text messages from contacts.
lg ls770 (boost)
Lg stylo ls770 boost
My stylo is showing the same error 1003 and on bootloop. Can someone help me figure out where to go to get the fIles to restore it back to stock.
PM or email me if you can help TIA
help
the issue im running into using the tutorial to flash the metro kdz is it says it got disconnected from the server. any ideas?
Hello everyone, I have been a fan of your forums for quite a while, you guys have an awesome community. I have been attempting to unbrick my VS990 with no success, I have LGUP and all of the proper dll files in the proper folders, I have two .kdz. One is the stock kdz, I can not get to work at all due to anti roll back (no matter which option I choose) and the other is the current kdz. I got that one to accept using update, but it did not fix my phone, it is still stuck in boot loop. and using refurbish I get an error message saying that it is not supported by that kdz. LG UP is fully recognizing my phone, I found the .kdz files no problem, I believe that I have followed all of the steps here >> https://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170 any help at all would be appreciated. Side note, I have not rooted or installed a custom recovery.
I would also like to add, I can not do a hard reset. Every time I attempt the phone either locks up when I hit the power key on yes to confirm factory reset, or sometimes it reboots to LG splash screen and locks up then. I am starting to wonder if there isnt a hardware problem with the phone instead of software.
Hiya I managed to brick my d802 after wipng from twrp I believe.
It seems hard bricked and nothing is working, all the happens when I boot is that i gets stuck in the LG logo. If I try download mode its not working and when I hit the power button all it shows is "charging! ??/100" in a yellow font.
Its not showing up in windows device manager as anything but "charging" also tried the guide on short circuiting the connections on the processor and its not responding to that also.
Ive attracted a link to a screenshot of the charging error. any advice is appreciated.
https://drive.google.com/file/d/1OO6qnHvMXOl5sgbKX0Ph_XVUcVOe9eBD/view?usp=sharing
stonesushi said:
Hiya I managed to brick my d802 after wipng from twrp I believe.
It seems hard bricked and nothing is working, all the happens when I boot is that i gets stuck in the LG logo. If I try download mode its not working and when I hit the power button all it shows is "charging! ??/100" in a yellow font.
Its not showing up in windows device manager as anything but "charging" also tried the guide on short circuiting the connections on the processor and its not responding to that also.
Click to expand...
Click to collapse
2013 LG G2 D802? Why post here in the 2017 LG V30 forum? Surely fellow G2 owners could help you better...
https://forum.xda-developers.com/lg-g2/help
But sounds like you accidentally wiped internal storage in TWRP, wiping out your OS and all internal memory.
You'll need to boot back into TWRP and drag over from a PC a compatible ROM to flash. You'll have to do the LG button dance to get into TWRP. After that, connect to PC and it'll act like a flash drive you can pull over items from PC.
Or did you by any chance make a backup in TWRP that you could restore? If not, why not? First thing you should do, when you install TWRP...
Sent via open market LG US998 V30/V30+
ChazzMatt said:
2013 LG G2 D802? Why post here in the 2017 LG V30 forum? Surely fellow G2 owners could help you better...
https://forum.xda-developers.com/lg-g2/help
But sounds like you accidentally wiped internal storage in TWRP, wiping out your OS and all internal memory.
You'll need to boot back into TWRP and drag over from a PC a compatible ROM to flash. You'll have to do the LG button dance to get into TWRP. After that, connect to PC and it'll act like a flash drive you can pull over items from PC.
Or did you by any chance make a backup in TWRP that you could restore? If not, why not? First thing you should do, when you install TWRP...
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Ah my bad im using a v30+ at the moment and must have confused the forums somehow ... Id post back at the right forum, thanks for replying though. mods please delete
Anyway nothing im doing helps, Ive tried getting back in to TWRP with the LG dance multiple times but it just wont let me boot into recovery nor download mode
I tried updating to android pie, then the phone reset and now its endlessly stuck on the logo, I cant turn it off, only thing that seemed to work was getting into the master reset menu, but even after reset the phone returned to the logo. It also doesn't connect to my pc. Please, what can I do, do I let it run out of battery? Is it gone now?
I'll let ChazzMatt answer this, as he is the expert. But I imagine he'll want to know which model number of V30 you have? Which ROM were you on? Is it rooted/BL unlocked? And how did you perform the update (OTA, LG Bridge, LGUP)?
Edit: Sorry, Chazz, I should have just waited, seeing you were right behind me
Coguj said:
I tried updating to android pie, then the phone reset and now its endlessly stuck on the logo, I cant turn it off, only thing that seemed to work was getting into the master reset menu, but even after reset the phone returned to the logo. It also doesn't connect to my pc. Please, what can I do, do I let it run out of battery? Is it gone now?
Click to expand...
Click to collapse
US998? There's 5 different workaround methods in the KDZ thread, in posts #2 and #6.
But a couple need unlocked Bootloader and TWRP. The others need you to manually go into Download mode. After THAT, your Dev Patched LGUP should recognize the phone. You should have read all this before attempting update.
IF you are on US988 firmware...
Fixed it, thanks
ChazzMatt said:
US998? There's 5 different workaround methods in the KDZ thread, in posts #2 and #6.
But a couple need unlocked Bootloader and TWRP. The others need you to manually go into Download mode. After THAT, your Dev Patched LGUP should recognize the phone. You should have read all this before attempting update.
IF you are on US988 firmware...
Click to expand...
Click to collapse
I already fixed it thanks! yes it was us998, I solved it by going to download mode and restoring oreo version with LGUP. Thanks for taking the time to respond! Im new to xda-developers and didnt know how to update my post
So as the title says, my phone is stuck with a no command screen and i think it is going through a boot loop along with it. so hears the backstory. Its a used phone, bought through Facebook [not such a great idea, but i bought a note 10 last year for half the price brand new, cant win every time though]. the seller failed to mention that it was rooted. and in a haste one day i deleted my conversation with him (not archived) when i was cleaning out my messages.
When the battery died i saw the first warning, stating "Your Device software cannot be checked for corruption. Lock Bootloader. Visit this link on another device: g.co/abh" that's when it got stuck in a boot loop. It may have received a update, im not sure. I visited the link which is for google pixel or nexus phones. so i brought it to a repair shop and local businesses will not work on it, because its been rooted. well i managed to get it working again, only by doing a factory reset. Ive had to do that twice. then one day i magisk had a update. i did it. and YAY its fixed. me being me wanted to unroot and lock the bootloader so it would be back to default. Nope. I uninstalled magisk. and boom i have the no command boot loop. i have tried using the LGUP program, but with it being att that got shut down real fast. I have looked all over for information. but i need it dumbed down. I catch on quick but a lot of the terminology is lost on me. I may have forget to mention some things. so please anyone who can help. any info would be appreciated.
So after much button combos and almost just chunking the phone. I managed to get it into download mode. by pressing and holding Vol- and Power button to get it to restart. (phone is unable to power off. unless the battery is 0%) While screen is blank, press and hold Vol+ while plugging usb into the phone. I had the cord in the computer first. it may work vice versa. Looking for AT&T official Firmware now. I think.
Brother, I request you. Please tell me how you did that.
i cant do anything. i have the exact same problem
Please guide me step by step.
Ankit Hotta said:
Brother, I request you. Please tell me how you did that.
i cant do anything. i have the exact same problem
Please guide me step by step.
Click to expand...
Click to collapse
for downloading mode, press power button and volume down while connecting USB to computer , when phone turns off press volume up.
later follow this steps
Flashing KDZ Using Lg up LG g8x (Guide)
Download required file : http://www.mediafire.com/folder/4mqovbes4jvvw/lg+UP In order, unzip the three zip files Install Lg USb driver. Install Lab first Install the DLL again Finally put UI_Config.lgl in the C:\Program Files (x86)\LG...
forum.xda-developers.com
Samee issue did u fixx itt?? Iff yes howww