Related
I thought I might share the updated radio, modem and environment files from oxygen os. So I made this flashable zip. I have tested it on my device and working with cm12 nightly right now. So hope it will work on yours too.
Link: Download Whole Firmware
Only modem
Mirror:
Full firmware
Only Modem
tested os with this firmware: CM12 nightly, Blisspop, CM12.1, Oxygen OS, Temasek rom, euphoria, Tugapower V5
Note: There is some changes I noticed. there is new file called reserve4.img which is being flashed in "/dev/block/platform/msm_sdcc.1/by-name/reserve4". And also the previous sdi.mbn file from "/dev/block/platform/msm_sdcc.1/by-name/dbi" is missing. Now I checked the updater script in oxygen os and noticed that its not removing the old sdi.mbn. Its just installing the reserve4.img as an addon. So I kept both the files in the flashable zip and it seems to work good. No issue so far.
Caution: DO NOT USE IT WITH CM11/CM11s/or ANY KITKAT ROM!
It will brick your device. Only flash on lolipop based roms. After you flash this, if you want to go back to cm11/cm11s, flash the latest cm12 nightly first and then install the cm11s files.
Are you saying that cm12 boots fine with this firmware? Sorry I don't understand well your post.
acuicultor said:
Are you saying that cm12 boots fine with this firmware? Sorry I don't understand well your post.
Click to expand...
Click to collapse
yes! using cm12 nightly 02/04 release with this firmware right now
But then if you want to go back to the old modem Cyano ... How should we do ??? But by flashing this new modem, you have to flash even the Fix for Proximity Sensor?
NeGriTa79 said:
But then if you want to go back to the old modem Cyano ... How should we do ??? But by flashing this new modem, you have to flash even the Fix for Proximity Sensor?
Click to expand...
Click to collapse
flash the old zip. dts it. and what proximity fix? Just flash the zip to update the modem and environment files. it will replace the file that comes in the cm12 zip. dts it
saurabhrck said:
yes! using cm12 nightly 02/04 release with this firmware right now
Click to expand...
Click to collapse
Official cm nightly contains it's own firmware. If you flash cm nightly it will rewrite the oxygenos firmware.
Confirmed working on CM12.1 by smoki3
saurabhrck said:
flash the old zip. dts it. and what proximity fix? Just flash the zip to update the modem and environment files. it will replace the file that comes in the cm12 zip. dts it
Click to expand...
Click to collapse
The modem Oxygen:
DI.3.0.c6-00241-M8974AAAAANAZM-1 ?????
You also apparent to you?
thanks will try yours. I made myself OxygenOS modem with latest CM12-04042015 build
https://www.sendspace.com/file/p92byr
I remember having issues to install CM12.1 after trying OxygenOS ,I had to flash CM12 to overwrite OxygenOS firmware . So I hope there will be no issues installing next CM12.1 build
Any improvement with reception?
GruZone said:
Any improvement with reception?
Click to expand...
Click to collapse
For me, I'd say that the signal strength is more stable than it is stronger... but I do feel it's a tad bit stronger. Could be placebo.
am i on oxygen's modem or cm12's? thankss!!
firenxe said:
am i on oxygen's modem or cm12's? thankss!!
Click to expand...
Click to collapse
Based on this, Oxygen.
http://forum.xda-developers.com/showthread.php?p=59892906
Flashed it and all working great so far. Anyone else noticed that the capacitive buttons light brighter? It's definitely noticeable in a dark room.
works fine here on cm12.1 04042015 unofficial!
for get the signal are necessary only 5 second! fastest than cm12 modem!
might be able to get away with changing the tz check script in the cm update zip if you've flashed this.
if youre using a custom build then might get your dev to change the tz version check to at least 1.09 rather than specific as the new is 1.39
Thank for sharing this modem.
I'm not sure if it's a placebo effect or the OxygenOS modem really works better.
Anyway it feels better and thanks for that.
Signal is def more stable!!
I just flashed it over the last nighlty blisspop http://downloads.blissroms.com/Blis...lissPop-v2.3-bacon-OFFICIAL-20150403-0935.zip - and it's working like a charm ...
Yeah the signal is more stable and faster to lock LTE here, and also 3G ... i can notice when i loose wifi and it changes to mobile data plan ... let's see if keeps like this.
Btw, everytime i flash new blisspop i should flash this modem / radio again !? right !?
flashed it over katinatez's Temasek rom.. so far no issues...
What's this?:
It's basically a rom for the SM-T555 I created for myself to use Xposed.
UPDATE: SM-T550 version added
Supersu v2.56
Xposed v75
Features:
XXU1AOJ1 Base_update 8.10.15
Deodexed
Deknoxed
Lightly debloated so as not to lose functionality.
Rooted with latest Supersu v2.56 binaries.
Xposed framework.
Install:
Install via TWRP recovery.
No need to wipe, but if you want a minimal system then its advisable to wipe DATA in recovery.
First boot will take around 10 mins.
Disclaimer:
As ever you flash this at your own risk, its up to you to ensure you have a backup with TWRP and/or the stock firmware to hand just in case the Hells Angels decide to ride into to town and kill your device
NOTE: I'm not really going to support this ROM with updates and such. It is what it is, and its up to you to modify it as you wish, more debloat e.t.c., take it or leave it, just leave out the whinging and whining.[emoji14]
UPDATE : New firmware base uploaded. Xposed updated to latest version v75.
Minimum requirement is to be running the same stock build XXU1AOJ1 before install.
SM-T555....https://www.androidfilehost.com/?fid=24269982086996227
SM-T550..... https://www.androidfilehost.com/?fid=24269982087000057
CREDITS: Me, Chainfire, Rovo89, arter97, Samsung
Hit the THANKS button any time you like.
DONATE LINK >>> [a href="http://forum.xda-developers.com/donatetome.php?u=4899305"]DONATE ME[/a]
can i use this on the p555?
stayfidz said:
can i use this on the p555?
Click to expand...
Click to collapse
No, devices above only.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
ashyx said:
No, devices above only.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
what version of xposed do i have to install on p555m???? and if i have to deox how can i do it?? i wanted for pokemon go
I've got the SM-TM550 and it will boot into the OS just fine and hangout for a little while, but after some time, it's bootlooping. Anyone else having this problem?
sirslipzalot said:
I've got the SM-TM550 and it will boot into the OS just fine and hangout for a little while, but after some time, it's bootlooping. Anyone else having this problem?
Click to expand...
Click to collapse
You may have to wipe data.
Sent from my SM-T280 using XDA-Developers mobile app
Your links seem to be down - they're both status 404 for me.
Also, while I'm at it, do you by any chance have any *.pit files available for SM-T555? I've been wanting to try out the 6.0.1 MM version for it but I can't flash any of the 5.0.2 (that have received the update to 6.0.2) or 6.0.1 ROMs because my T555 is for SEB region and there for any of the ROMs that are 6.0.1 ready, can't be flashed because of invalid EXT4 errors.
karlis1989 said:
Your links seem to be down - they're both status 404 for me.
Also, while I'm at it, do you by any chance have any *.pit files available for SM-T555? I've been wanting to try out the 6.0.1 MM version for it but I can't flash any of the 5.0.2 (that have received the update to 6.0.2) or 6.0.1 ROMs because my T555 is for SEB region and there for any of the ROMs that are 6.0.1 ready, can't be flashed because of invalid EXT4 errors.
Click to expand...
Click to collapse
Links fixed. I have the pit file but not sure that's your issue.
Have had no such issues flashing other region firmware.
Using the Russian version on UK model no problem.
Thanks for the quick response, I'll check out your ROM when I get back. Also, I'll give different region ROMs a try again... maybe the images I've been flashing were corrupt(I tried flashing VOD region firmwares for 5.0.2 & 6.0.1 and Odin failed to flash both), since it complained about mismatching sizes, I just wrote it off as certaint different regions having different partition sizes.
karlis1989 said:
Thanks for the quick response, I'll check out your ROM when I get back. Also, I'll give different region ROMs a try again... maybe the images I've been flashing were corrupt(I tried flashing VOD region firmwares for 5.0.2 & 6.0.1 and Odin failed to flash both), since it complained about mismatching sizes, I just wrote it off as certaint different regions having different partition sizes.
Click to expand...
Click to collapse
You can't flash carrier specific firmware as it will be different as you have found.
Just flash whatever is the latest.
touchscreen&wifi don`t works
chemamontevideo said:
touchscreen&wifi don`t works
Click to expand...
Click to collapse
As stated in the OP.
Minimum requirement is to be running the same stock build XXU1AOJ1 before install.
Click to expand...
Click to collapse
Been using this since mid-August, so I thought I'd leave a bit of feedback .... I have had no problems whatsoever with the ROM - works great. Back when I last posted here I initially wanted to get MM on it because I've gotten used to it on my Nexus, but with Xposed already bundled in, this was just a one up in comparison to a MM ROM.
@ashyx - I have a stock rooted XXU1A0J1 build (the one you reference as necessary), on a T550.
I tried the T550 ROM, wiped cache/dalvik/data after flashing it.
Touchscreen works fine, but no joy on wifi. I can see networks, but not connect. I reset my hotspot AP to open (no encryption) temporarily, still no success. The wifi just shows "connecting" for an extended period of time, then "connecting" disappears briefly, then it reattempts connecting. Eventually I get a "Failed to obtain IP address" message.
I booted a Nexus 7 2013, it instantly connected to the hotspot, had web access.
I restored my backup from TWRP, network came up immediately (hotspot set back to encrypted).
Any ideas? Something broken in the t550 rom I downloaded?
Thanks!
is there a way to remove the "loud audio" pop-up screen that you have to comfirm every time you turn up the volume? this is the worst part of thr sm-t550 because i adjust the audio alot.
i heard its part of the asop but is there a way to hide popup and auto comfirm it so you can turn audio up without the spam?
XLoad3d said:
is there a way to remove the "loud audio" pop-up screen that you have to comfirm every time you turn up the volume? this is the worst part of thr sm-t550 because i adjust the audio alot.
i heard its part of the asop but is there a way to hide popup and auto comfirm it so you can turn audio up without the spam?
Click to expand...
Click to collapse
There's an xposed module by pyler available in the repository.
http://repo.xposed.info/module/com.pyler.nosafevolumewarning
I've used it before, should do the trick.
Any chance one of these will be developed for the SM-P355? There does not seem to be a single ROM out there for it
Hello ashyxx, i hope you are good, one qestion, if i want instal xposed, i need instal your rom or with my rom stock is good.. thanks
calaiou said:
Hello ashyxx, i hope you are good, one qestion, if i want instal xposed, i need instal your rom or with my rom stock is good.. thanks
Click to expand...
Click to collapse
You can install xposed on any rom.
ashyx said:
You can install xposed on any rom.
Click to expand...
Click to collapse
thanks brother ashyx
Hey guys,
right now there are lots oft oreo Roms supporting mido, but everytime i flashed one (like cardinal which is working for many users) i cant connect to my home wifi network. It tries to connect, then the signal is dropping and it says "saved" again. On other phones running oreo this wifi is working perfectly. I already disabled IPv6 and it didnt help. So I hope anyone knows how to fix it!
Same here, i had problems connecting to hidden WiFi in every oreo rom i tested. By the way what firmware did you flash when installing your Rom
I have this problem ...happens with Oreo and sometimes with nought
Just tried to install Pixel Experience, Aosp Extended and LineageOs, still same wifi problem with all roms.
Has anyone been able to fix it?
Same here! hope someone gets a fix
le_zurdo said:
Just tried to install Pixel Experience, Aosp Extended and LineageOs, still same wifi problem with all roms.
Has anyone been able to fix it?
Click to expand...
Click to collapse
Using AEX 5.1 a few days now, no wifi problems. Are you on latest firmware? I got cellular signal improvement with the latest firmware, don't know if it fixes wifi probs too, but if you are not on latest firmware you should try that.
akisg said:
Using AEX 5.1 a few days now, no wifi problems. Are you on latest firmware? I got cellular signal improvement with the latest firmware, don't know if it fixes wifi probs too, but if you are not on latest firmware you should try that.
Click to expand...
Click to collapse
Yeah, I have flashed firmwares since they were extracted and posted here. By the way, I also noted that none of that firmware has helped me with the signal drop issue that was reported since LineageOs 14.1
akisg said:
Using AEX 5.1 a few days now, no wifi problems. Are you on latest firmware? I got cellular signal improvement with the latest firmware, don't know if it fixes wifi probs too, but if you are not on latest firmware you should try that.
Click to expand...
Click to collapse
What firmware version?
MyNameIsRage said:
What firmware version?
Click to expand...
Click to collapse
I'm using latest beta 8.1.18
https://forum.xda-developers.com/re...irmware-firmware-miui-9-china-stable-t3697976
Might be some setting on your router
Ceejay343 said:
Might be some setting on your router
Click to expand...
Click to collapse
I'm not sure about it. Because I tested from several wifi connections. And all of them work ok if I try to connect from any Miui rom or any Nougat based custom rom.
*deleted*
i have same problem
i have same problem all roms Pie
Greetings,
On my S9+ (Exynos) camera blinking green when recording video after flashing custom ROM. On lower FPS (30) blinking slower. After first try of video recording camera still blinking until restarting app. What can I do?
Thank you in advance
Same thing is happening to me. I've used LOS 15.1 6/12 and 6/19 with the same problem. I updated to the latest stock ROM to get past the black camera problem, and now this. I don't see a fix for this listed in the next nightly either.
madmartian said:
Same thing is happening to me. I've used LOS 15.1 6/12 and 6/19 with the same problem. I updated to the latest stock ROM to get past the black camera problem, and now this. I don't see a fix for this listed in the next nightly either.
Click to expand...
Click to collapse
Thank you for your reply. I think that's only LineageOS's trouble, after flashing another ROM all is fine
rhizoome said:
Thank you for your reply. I think that's only LineageOS's trouble, after flashing another ROM all is fine
Click to expand...
Click to collapse
Which ROM did you end up flashing?
I tried the June 27 update of LOS and the problem persists.
madmartian said:
Which ROM did you end up flashing?
I tried the June 27 update of LOS and the problem persists.
Click to expand...
Click to collapse
This one https://forum.xda-developers.com/ga...elopment/g96xf-ard4-rooted-stock-rom-t3789326 after flashing my modem and bl was updated automatically
Before that I flashed https://forum.xda-developers.com/ga...ross-device-development/rom-lightrom-t3770243 but there after try to root I have camera issue with any camera app and stock. Maybe that's because of old bl and modem, so will try to flash it after ROM above
samsung s9 locked after reset ?
The problem also persists when using Carbon ROM, all Stock based ROMs I tried so far worked well with the Camera
rhizoome said:
This one https://forum.xda-developers.com/ga...elopment/g96xf-ard4-rooted-stock-rom-t3789326 after flashing my modem and bl was updated automatically
Click to expand...
Click to collapse
Thanks for the link. Very helpful for the stock rooted ROM as well as the firmware and vendor flashes. I have gone to this for now as well, at least until folks report no issues with the camera in LOS. I use this for a camera more than a phone.
mirazulhossainn said:
samsung s9 locked after reset ?
Click to expand...
Click to collapse
If you mean OEM Unlock, after first unlocking it wasn't lock again never except when you flash stock without any modification with multifile ROM.
zengorr said:
The problem also persists when using Carbon ROM, all Stock based ROMs I tried so far worked well with the Camera
Click to expand...
Click to collapse
Thank you for reply, we'll see will it fixed after new releases
madmartian said:
Thanks for the link. Very helpful for the stock rooted ROM as well as the firmware and vendor flashes. I have gone to this for now as well, at least until folks report no issues with the camera in LOS. I use this for a camera more than a phone.
Click to expand...
Click to collapse
Same thing
try footej camera
Anyone got a solution here? I'm getting the same flickering on the new Lineage OS release, s9
Apl3x89 said:
Anyone got a solution here? I'm getting the same flickering on the new Lineage OS release, s9
Click to expand...
Click to collapse
Had the same problem. Now I use OpenCamera, and switched on the option to use Android-5-Camera2-Api.
Flickering doesn't occur anymore (in this app).
Hey all,
I picked up an H932 and the rooting process seemed easy enough. I have TWRP installed and I got through the whole tutorial without a hitch.
However, I've read elsewhere of people upgrading to different versions of stock before installing a custom rom? I guess I'd still be on 10d, and I'm thinking to install Havoc OS unofficial as it runs great on my H930.
Edit: Nevermind I guess. I installed 20s fullstock and that worked fine, rebooted into recovery and installed Havoc. Don't really have a way to test it though.
TPMJB said:
Hey all,
I picked up an H932 and the rooting process seemed easy enough. I have TWRP installed and I got through the whole tutorial without a hitch.
However, I've read elsewhere of people upgrading to different versions of stock before installing a custom rom? I guess I'd still be on 10d, and I'm thinking to install Havoc OS unofficial as it runs great on my H930.
Edit: Nevermind I guess. I installed 20s fullstock and that worked fine, rebooted into recovery and installed Havoc. Don't really have a way to test it though.
Click to expand...
Click to collapse
The problem was fingerprint sensor didn't work right on custom ROMs if you stayed on Nougat after root. You had to upgrade back to Oreo before installing custom ROMs.
ChazzMatt said:
The problem was fingerprint sensor didn't work right on custom ROMs if you stayed on Nougat after root. You had to upgrade back to Oreo before installing custom ROMs.
Click to expand...
Click to collapse
Yeah I did some more reading then found the 20s thread. I installed 20s and went straight to Havoc.
I need to do some testing though.