Related
Hello everybody I am after some help please.
I own an Abox a1 plus android box s905x. Somehow the original firmware became currupt but there are no original firmwares on the net that I can find to get this box up and running again. With this said i have managed to get it running again through trial and error with a different rom.
The only thing is I am in need of the original remote.conf file to get the remote working again can anybody help as I fear i have run out of options.
Hi, Same request, i have remove many apps on original firmware and don't work after reboot, i flash nexbox 7.1 firmware all work fine but miss remote.conf original (Abox A1 plus 8gb/2gb - s905x, firmware original is marshmallow).
Thanks in advance.
djmagma59 said:
Hi, Same request, i have remove many apps on original firmware and don't work after reboot, i flash nexbox 7.1 firmware all work fine but miss remote.conf original (Abox A1 plus 8gb/2gb - s905x, firmware original is marshmallow).
Thanks in advance.
Click to expand...
Click to collapse
This exactly the firmware I got my Abox A1 plus running with too. It works brilliantly with no mods. I just needs that remote.conf file afaik.
I can't get any firmware to work on my Abox A1 Plus. It always gets stuck on the logo. Where did you download your firmware from?
samuau said:
I can't get any firmware to work on my Abox A1 Plus. It always gets stuck on the logo. Where did you download your firmware from?
Click to expand...
Click to collapse
Hi, take one firmware here but respect your memory configuration (2Gb ram and 8 Gb rom = 2-8G).
mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!hlJDxRxQ
(add https before for full address, i don't have acces post link ^^ )
But if you have original again work backup your remote.conf in system/etc/, or remote dont work after upgrade. (and if you can backup, please post here your remote.conf file) thanks.
Sorry for bad english, i'm french.
Edit : I search for repair and i found we don't have a remote.conf but our file named remote_mouse2.tab
i found my factory code via dmesg –c on ssh and it's recognized, now i remap function one by one
The power on keycode is hardcoded in bootloader (and with this rom is different from original). All key work but if box off, power on with remote don't work.
Delete this please :/
djmagma59 said:
Hi, take one firmware here but respect your memory configuration (2Gb ram and 8 Gb rom = 2-8G).
mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!hlJDxRxQ
(add https before for full address, i don't have acces post link ^^ )
Click to expand...
Click to collapse
Thanks for the link djmagma59! I already tried this specific firmware, but I get the burning tool error at 98% (see above). I'll try again tho. If I install the 6.0 version of the firmware the installation goes through, but the box gets stuck on boot (logo).
Did you have any issues installing it? Any ideas for me to try to solve it?
Again, I appreciate the help.
Hey I don't know if you still need it but I was looking for help myself and foud this thread, I have this box, it came with with 7.1.2 tho, I'm attaching the remote.conf file for you.
Need Basic Help for Resolving REboot Problem
Hi All,
I am facing loading my Abox A1 Plus . The screen is stuck reboot (bootloading). I can see options like Update using EXT , Update using ADB and so on. I tried Loading Zipped img files onto the USB and then update using EXt. But getting Signature Verification Failed Error. What are the basic steps as I could not find my device even after using AMLogic USB Tool.
Thanks in Advnace
"Factory" Recovery for MTCx PX3, PX5 and PX6 SOM.
UPDATED" 26.06.2023 - Before doing this, try your Headunit USB cable first - Some headunits support OTG directly on the headunit USB cable.
Come here after using paid Software "Mod" tools like Modinstaller?
This method is the factory method, which can completely recover a "bricked" SOM, recover from failed "modinstaller" or failed upgrade of Paid mods.
Finally - OTG for all without modifying your head-unit. With only basic electronic/soldering skills, get OTG and fearlessly flash or recover a 'bricked' MTCD/E (HCT printed on SOM) Rockchip PX3, PX5 SOM.
See attached pics for making an OTG cable from a USB cable and two resistors.
Resistors are 12K and 15k (22k is probably better) or anyone of the following. combinations. These resistors are necessary as 'voltage dividers', with a value between 1.8v and 3.3 OK. These simply place a logic '1' on recovery and USB-OTG to 'tell' the SOM to go into OTG recovery mode.
R1 | R2
-------------------
1K | 1.8K
2.2K | 3.3K
10K | 18K
12K | 22K
Get Windows Driver [Driver assistant - v5.11] and [RKDevTool 2.93] for direct/OTG SOM flashing:
1. From a chinese Firefly site here
or
2. My Google Drive here
[RKDevTool] .ini file is set English, otherwise tool will be rendered in Chinese.
This tool for dumping / getting full backup of SOM
Excellent tool, thanks @RedScorpioXDA
Note - all tools and driver have equivalent Linux versions.
26.06.2023 - Android Tool is now RkDevTool
PX5 Android 9 Update.img - suitable for flashing via rockchip tools - https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 9/YB
The image is located in px5 android 9/yb. The file has "_img_" listed in the filename.
Note Android 10 has an img file too - located in px5 android 10/chs.
PX5 Android 8 Oreo full Partition extract suitable for recovering SOM, flashing via rockchip tools - https://drive.google.com/drive/folders/1P703unZDA_TdRzl6fjkkb-YUB-KpTViW
Using the RockChip RKDevTool:
For OREO: Unzip and flash all partitions in the ZIP file [px5_OREO_Full_13032018-UseToRecoverOrCreateNew.7zip here
For Android 6, flash the latest update.img file in RKDevTool
There are guides to partition flashing found on the internet, would be great if anyone could contribute by posting step-by-step instructions or a video to assist others (there are now posts in this thread...)
A generic guide to the RockChip RKDevTool, flashing partitions or image files is here as previously posted.
Credit (thanks!) to @scorillo_ro for the detailed image/connections diagram.
Worst case - SOM doesn't respond - force 'maskrom' detailed here explaining what MaskRom is and here on how to for your PX5 (px3 is similar.) Steps are: Power Off SOM and disconnect USB to PC. Use Tweezers, apply power/connect USB. Hold until Windows Device chime is heard (within about 2 seconds of power on.) See attached pic.
Warning : Use thin pins for OTG cable in order to avoid the damage of the SOM connectors, although along the thread it has been noted many times that damage to the SOM socket is very likely to happen if thick pins are used...OR buy SOM header from Aliexpress, digikey etc.[/COLOR]
17/11/2019 - Edit: Corrected URL for Windows and Linux Rockchip tools
04/04/2020 - link to px5 android 9 full update.img
20.06.23 - Update broken links to driver and tool. Update Name of tool (was) Android Tool - (now) RKDevTool
Nice work @marchnz !
A full step by step and pictures howto should be made now and all those PX5 users without sdcard slots will be able to use this method to get Android8!
LE. I drew a schema
scorillo_ro said:
Nice work @marchnz !
A full step by step and pictures howto should be made now and all those PX5 users without sdcard slots will be able to use this method to get Android8!
LE. I drew a schema
Click to expand...
Click to collapse
So with this methon, will be possible to flash on 6.0 unity, the recovery and the system of android 8.0?
lucajust said:
So with this methon, will be possible to flash on 6.0 unity, the recovery and the system of android 8.0?
Click to expand...
Click to collapse
Absolutely! I've done it a bunch of times. You can either use the sdupdate.img from the Oreo upgrade thread to load the Oreo recovery and then install the oreo .zip from recovery OR a full set of partition images.
I have a full set of partition images if needed, they're about 25gb but should compress right down (that 25gb includes [user] partition which is an empty partition.
Good... I'll try... But the process Need a PC no? Becouse with the unit with SD card slot needs PC only to prepare the sd card for android 8 recovery
Inviato dal mio Mi A1 utilizzando Tapatalk
lucajust said:
Good... I'll try... But the process Need a PC no? Becouse with the unit with SD card slot needs PC only to prepare the sd card for android 8 recovery
Inviato dal mio Mi A1 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, PC. I've updated the post to include links to tools and driver. Driver 4.5 & Android tool works on Win7 - Win 10, x86 and x64.
For those without SDCard wanting to upgrade to Oreo:
You could try OTG flashing the Oreo sdupdate.img, fit SOM back to headunit and then try loading the Full Oreo update.zip from USB. Otherwise I will need to upload the full Oreo partitons dump with instructions....over the next few days....
marchnz said:
Yes, PC. I've updated the post to include links to tools and driver. Driver 4.5 & Android tool works on Win7 - Win 10, x86 and x64.
For those without SDCard wanting to upgrade to Oreo:
You could try OTG flashing the Oreo sdupdate.img, fit SOM back to headunit and then try loading the Full Oreo update.zip from USB. Otherwise I will need to upload the full Oreo partitons dump with instructions....over the next few days....
Click to expand...
Click to collapse
Thanks... What are the "SOM"?
Inviato dal mio Mi A1 utilizzando Tapatalk
It is my understanding that I can flash the SOM without the rest of the board?
So just disconnect the SOM then hook up the USB as per the diagram and it will be detected by windows. Use android tool / RockChip Batch Tool with a android 6/8 recovery.
The issue I have is that the nand doesn't look like its recognised after an attempt to flash oreo. Please see attached picture.
Harsesis said:
It is my understanding that I can flash the SOM without the rest of the board?
So just disconnect the SOM then hook up the USB as per the diagram and it will be detected by windows. Use android tool / RockChip Batch Tool with a android 6/8 recovery.
The issue I have is that the nand doesn't look like its recognised after an attempt to flash oreo. Please see attached picture.
Click to expand...
Click to collapse
Yes, you understood correctly. This method may save you...
scorillo_ro said:
Yes, you understood correctly. This method may save you...
Click to expand...
Click to collapse
You mentioned a full partition dump. I'm hoping I don't need this. I remember reading that the partition structure needed to be changed for android 8. Do you have any idea how to do this via the tools? I remember reading about something called a storagemap that rockchip uses.
Harsesis said:
You mentioned a full partition dump. I'm hoping I don't need this. I remember reading that the partition structure needed to be changed for android 8. Do you have any idea how to do this via the tools? I remember reading about something called a storagemap that rockchip uses.
Click to expand...
Click to collapse
Wait for @marchnz to put this information here. Meanwhile you can start building your USB JIG.
Will try this, just have to buy resistord.
One question... How to download from Github?
Regards
Edit: Found it
Clandaries said:
Will try this, just have to buy resistord.
One question... How to download from Github?
Regards
Click to expand...
Click to collapse
Move one level up to https://github.com/rockchip-linux/rkbin then use the green "Clone or download" button, then select "Download ZIP"
Finally I hear the Windows connecting sound. But my Device is still not detected. It says "usb device not recognized". I thaught it would be the driver but I installed the v4.5 Driver. Any Ideas?
Maybe you need to switch green and white usb data wires...
scorillo_ro said:
Maybe you need to switch green and white usb data wires...
Click to expand...
Click to collapse
Yeah already tried that. Also tried it with a different PC both Windows 10 but same problem. I also tried to a other SoM but this one got the same problem. I really dont know anymore what to do
Malle355 said:
Yeah already tried that. Also tried it with a different PC both Windows 10 but same problem. I also tried to a other SoM but this one got the same problem. I really dont know anymore what to do
Click to expand...
Click to collapse
Strange. I only used Windows 7.
You can also try using a powered usb switch. Maybe the USB ports you used does not provide sufficient power? This is just an assumption.
Or, as @marchnz said, you can try enter maskrom mode.
scorillo_ro said:
Strange. I only used Windows 7.
You can also try using a powered usb switch. Maybe the USB ports you used does not provide sufficient power? This is just an assumption.
Or, as @marchnz said, you can try enter maskrom mode.
Click to expand...
Click to collapse
My Device is only getting detected in MaskRom Mode. Its not getting detected in Normal Mode. But as I said it says "usb device not recognized".
Malle355 said:
My Device is only getting detected in MaskRom Mode. Its not getting detected in Normal Mode. But as I said it says "usb device not recognized".
Click to expand...
Click to collapse
Did you try to upload a firmware image from maskrom mode? The other mode, not working for you, is called loader mode and is provided by software that might be corrupted.
scorillo_ro said:
Did you try to upload a firmware image from maskrom mode? The other mode, not working for you, is called loader mode and is provided by software that might be corrupted.
Click to expand...
Click to collapse
Cant upload the Firmware from MaskRom Mode. I got the "usb device not recognized" error. I never goth my the device in the loader mode. My PC never detected the SoM in loader mode.
RCA 10" Touchscreen Tablet PC/DVD Combo Featuring Android 6.0 (Marshmallow)
*No idea why it says PC/DVD as its Android not Windows.
ASIN/Model numbers: ASIN: B077L4VBHK Model: DRP2091
RCA typical RCT number: RCT6603W47M7
Chipset/CPU: MT8127
Ports: 1x Mirco USB (supports ADB! etc. unlike VikingPRO), 1xUSB A, 1xHDMI (mini i believe), 1xMicroSD slot (supports up to 128GB)
Special: 1xDVD/CD Reader/Drive. has unlockable bootloader via fastboot oem unlock
Root Attempts: (Failed: KingoRoot, SRS, KingRoot, RootMaster)
MTK Droid Root & Tools and SP Flash Tools don't seem to work right with this cant create scatter etc. (i assume because of MT8127)
Links:
Walmart/Wally World
Amazon
if any dev could help me root this and get custom recovery would be great.
UPDATE: Thanks to NepoRood (and my testing) theres now CWM recovery (attached to post extract zip and flash img via fastboot flash recovery command.) unfortunately we were still unable to get root access.. if anyone has this device or wants to help root this pm me.
Additional files attached maybe someone can build me cwm or twrp for this as i could never get anything to build for mtk devices.
darkensx said:
Additional files attached maybe someone can build me cwm or twrp for this as i could never get anything to build for mtk devices.
Click to expand...
Click to collapse
I found various firmware downloads, but need to know the exact type of firmware you are running.
Example of one I found: rct6603w47m7-android6.0-v23-v2.15.80 (<-- underlined part is what matters)
If you boot into recovery, it should show you the type of firmware you have.
NepoRood said:
I found various firmware downloads, but need to know the exact type of firmware you are running.
Example of one I found: rct6603w47m7-android6.0-v23-v2.15.80 (<-- underlined part is what matters)
If you boot into recovery, it should show you the type of firmware you have.
Click to expand...
Click to collapse
DRP2091-android6.0-v62-v1.19.90-E02
*also says on very bottom of screen "supported API: 3"
**DRP2091 is rct6603w47m7 not sure why there's so many different model/serial numbers referencing the same exact device...
also i managed to dump the whole device via SP tools readback on linux so if anything beyond recovery or boot img are needed i should have it.
darkensx said:
DRP2091-android6.0-v62-v1.19.90-E02
*also says on very bottom of screen "supported API: 3"
**DRP2091 is rct6603w47m7 not sure why there's so many different model/serial numbers referencing the same exact device...
also i managed to dump the whole device via SP tools readback on linux so if anything beyond recovery or boot img are needed i should have it.
Click to expand...
Click to collapse
That version isn't on the site (or any v1.19.x), I'll download the images from the OP in a bit and see what's inside...
NepoRood said:
That version isn't on the site (or any v1.19.x), I'll download the images from the OP in a bit and see what's inside...
Click to expand...
Click to collapse
Had the same issue also I came across a bunch of ota test files on a Chinese site but links were dead and because no ota update is available i can't grab the ota url or file name. So ended up hitting a dead end.
Would it be possible to bypass the activation code screen with cwm or twrp? Or maybe put a different version of android on the tablet, other than marshmallow.?
darkensx said:
Additional files attached maybe someone can build me cwm or twrp for this as i could never get anything to build for mtk devices.
Click to expand...
Click to collapse
I'm having same problem could someone help me root this tablet explain as easy as possible and slow and clear directions
I have no idea
johnnymack said:
I'm having same problem could someone help me root this tablet explain as easy as possible and slow and clear directions
Click to expand...
Click to collapse
I've got the RCT6603W47M7 tablet, but here in the UK it goes by the name of RCA Neptune 10.1L.
Problem is I have bricked it and I am now trying to recover it using SP Flash Tools. I have tried 2 different stock ROMs, only to have nothing but errors and interruptions during flashing. (errors 2004 and 4008). My tablet is fully charged yet it will randomly disconnect during flashing. I've tried both the MTKAllInOne.bin and DA_SWSEC.bin but I still get the same problem either way.
I've tried different USB ports, different cables and the two download agents that I just mentioned but I am stumped.
I wanted to try the ROM found here https://www.needrom.com/download/rca-rct6603w47m7/
But as I don't have a premium account I cannot access it.
Any ideas? This is very frustrating.
BP9375 said:
I've got the RCT6603W47M7 tablet, but here in the UK it goes by the name of RCA Neptune 10.1L.
Problem is I have bricked it and I am now trying to recover it using SP Flash Tools. I have tried 2 different stock ROMs, only to have nothing but errors and interruptions during flashing. (errors 2004 and 4008). My tablet is fully charged yet it will randomly disconnect during flashing. I've tried both the MTKAllInOne.bin and DA_SWSEC.bin but I still get the same problem either way.
I've tried different USB ports, different cables and the two download agents that I just mentioned but I am stumped.
I wanted to try the ROM found here https://www.needrom.com/download/rca-rct6603w47m7/
But as I don't have a premium account I cannot access it.
Any ideas? This is very frustrating.
Click to expand...
Click to collapse
problem with the cwm recovery if i remember correctly is any thing flashed by it doesnt take the device will just bootloop
i no longer have the device currently i might pickup another at some point... i cant remember if i used the micro usb port to flash or if i had to use a usb male to male cable..
darkensx said:
problem with the cwm recovery if i remember correctly is any thing flashed by it doesnt take the device will just bootloop
i no longer have the device currently i might pickup another at some point... i cant remember if i used the micro usb port to flash or if i had to use a usb male to male cable..
Click to expand...
Click to collapse
Thank you for your reply, I was worried that this discussion was dead. That's frustrating to say the least! Damn! Well, I don't know if this will work but I found another device that is also a MT8127 and has exactly the same spec of this tablet. My point being is that I found a TWRP image for that device, and because it's the same chip set I assume that it'll work for this device too?
If I can get my bricked tablet to even turn on I shall try it. It also makes me wonder that if we were able to root the device, would we be able to access the internal storage by normal means? By using the micro USB ? Either way it'd be great to have it rooted.
I stayed up all night last night trying to flash this tablet and still no luck, it keeps disconnecting half way through.
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.
Hello everyone! I just found out my OTT Android TV from SDMC so if anyone have same device with me can you help me to get original firmware and probably custom rom? or maybe if anyone successfully rooted this device. thank you in advance.
I managed to unlock the bootloader but I can't go into mask mode & not detecting any devices in Amlogic Burn Tool
Try reboot update and then quickly plugging in usb cable. It should then be recognised by the burning tool.
kalehrl said:
Try reboot update and then quickly plugging in usb cable. It should then be recognised by the burning tool.
Click to expand...
Click to collapse
Same result, still not recognized by burning tool, but i have fastboot access
Maybe i need to change my M2M Cable?
Chicada said:
I managed to unlock the bootloader but I can't go into mask mode & not detecting any devices in Amlogic Burn Tool
Click to expand...
Click to collapse
what version Amlogic Burn Tool are you use ?
Refer to kalehrl's post below.
Normally yes, but oftentimes the operators disable the normal use of their device once the contract has expired and customers don't want to continue using the service. After a reset, you are greeted by a screen with the serial number of the device and you cannot proceed. So the only option is to flash the box with custom firmware loosing the widevine L1 and Google certification with Google chromecast in the process.
kalehrl said:
So the only option is to flash the box with custom firmware
Click to expand...
Click to collapse
I have deleted my opinion since you seem so sure about this. With such certitude, you couldn't possibly be wrong. Although you are.
kalehrl said:
Normally yes, but oftentimes the operators disable the normal use of their device once the contract has expired and customers don't want to continue using the service. After a reset, you are greeted by a screen with the serial number of the device and you cannot proceed. So the only option is to flash the box with custom firmware loosing the widevine L1 and Google certification with Google chromecast in the process.
Click to expand...
Click to collapse
I saw someone had success to connect the box with UBT , Thank you very much for your help and the tips!
nightbb said:
what version Amlogic Burn Tool are you use ?
Click to expand...
Click to collapse
V3.1.0