Hello everybody I am after some help please.
I own an Abox a1 plus android box s905x. Somehow the original firmware became currupt but there are no original firmwares on the net that I can find to get this box up and running again. With this said i have managed to get it running again through trial and error with a different rom.
The only thing is I am in need of the original remote.conf file to get the remote working again can anybody help as I fear i have run out of options.
Hi, Same request, i have remove many apps on original firmware and don't work after reboot, i flash nexbox 7.1 firmware all work fine but miss remote.conf original (Abox A1 plus 8gb/2gb - s905x, firmware original is marshmallow).
Thanks in advance.
djmagma59 said:
Hi, Same request, i have remove many apps on original firmware and don't work after reboot, i flash nexbox 7.1 firmware all work fine but miss remote.conf original (Abox A1 plus 8gb/2gb - s905x, firmware original is marshmallow).
Thanks in advance.
Click to expand...
Click to collapse
This exactly the firmware I got my Abox A1 plus running with too. It works brilliantly with no mods. I just needs that remote.conf file afaik.
I can't get any firmware to work on my Abox A1 Plus. It always gets stuck on the logo. Where did you download your firmware from?
samuau said:
I can't get any firmware to work on my Abox A1 Plus. It always gets stuck on the logo. Where did you download your firmware from?
Click to expand...
Click to collapse
Hi, take one firmware here but respect your memory configuration (2Gb ram and 8 Gb rom = 2-8G).
mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!hlJDxRxQ
(add https before for full address, i don't have acces post link ^^ )
But if you have original again work backup your remote.conf in system/etc/, or remote dont work after upgrade. (and if you can backup, please post here your remote.conf file) thanks.
Sorry for bad english, i'm french.
Edit : I search for repair and i found we don't have a remote.conf but our file named remote_mouse2.tab
i found my factory code via dmesg –c on ssh and it's recognized, now i remap function one by one
The power on keycode is hardcoded in bootloader (and with this rom is different from original). All key work but if box off, power on with remote don't work.
Delete this please :/
djmagma59 said:
Hi, take one firmware here but respect your memory configuration (2Gb ram and 8 Gb rom = 2-8G).
mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!hlJDxRxQ
(add https before for full address, i don't have acces post link ^^ )
Click to expand...
Click to collapse
Thanks for the link djmagma59! I already tried this specific firmware, but I get the burning tool error at 98% (see above). I'll try again tho. If I install the 6.0 version of the firmware the installation goes through, but the box gets stuck on boot (logo).
Did you have any issues installing it? Any ideas for me to try to solve it?
Again, I appreciate the help.
Hey I don't know if you still need it but I was looking for help myself and foud this thread, I have this box, it came with with 7.1.2 tho, I'm attaching the remote.conf file for you.
Need Basic Help for Resolving REboot Problem
Hi All,
I am facing loading my Abox A1 Plus . The screen is stuck reboot (bootloading). I can see options like Update using EXT , Update using ADB and so on. I tried Loading Zipped img files onto the USB and then update using EXt. But getting Signature Verification Failed Error. What are the basic steps as I could not find my device even after using AMLogic USB Tool.
Thanks in Advnace
Related
Can some one point me in the right direction for the firmware for a t95z plus firmware it's a amlogic s912 chipset with 2gb ram
h t t p s://mega.nz/#F!Ix9zmZqC!LIVPa5zPR6XmcwODW42r7Q
Use this method to flash the box:
h t t p://androidpcreview.com/how-to-use-the-amlogic-usb-burning-tool-to-manually-update-firmware/3749/
You will need an usb to usb male cable. Connect to usb1 on the box. No power cable needed.
Worked for me.
are there newer images.. I bought one of these
https://www.aliexpress.com/item/2GB...73409096.html?spm=2114.search0104.8.57.YrpUy2
[Genuine] T95Z Plus 2GB 16GB 3GB 32GB Amlogic S912 Octa Core Android 7.1 OS Smart TV BOX 2.4G/5GHz WiFi BT4.0 4K pk X92 h96 pro+
I got the 3g/32g rom was fast and seemed ok android 7.1
until I upgraded or installed the superuser from chain DD said installed ok and asked to reboot which
I did for it only to hang on the boot animation... so very sad
I suspect its altered or written to the wrong partition?
now need to reflash
recovery works with toothpick
is there a image for this new update? and can it be flash from recovery from sd card so dont need a pc
as pc cable method is more a pain
Firmware for t95p ?
(3GB)
T95ZPLUS-7.1-912-3GB-17.3-v1072
https://goo.gl/RG92GR
by the way, who also want a 2GB or directly dl from their link are also welcome,
Below are the links from sunvell,
(2GB)
T95ZPLUS-7.1-912-2GB-17.3-v1013
http://pan.baidu.com/s/1jl7jLOU
Pw: 81uc
(3GB)
T95ZPLUS-7.1-912-3GB-17.3-v1072
http://pan.baidu.com/s/1hrPU5rY
Pw: gbrg
I add the info for others with bricked boxes or bad ram.. reformat reflash can bring them back
also try a new power pack.. often the voltage degrades over years and drops too low
I used the 3gb with the flashing tool usb to right sid port... leave power plug out.. and insert toothpick and
connect usb from pc.. should beep if pc detects device on USB and the tool should show finally
http://androidpcreview.com/how-to-use-the-amlogic-usb-burning-tool-to-manually-update-firmware/3749/
http://androidpcreview.com/wp-content/uploads/2015/12/USB_Burning_Tool_v2.0.6.2_build2.rar
---------- Post added at 12:49 AM ---------- Previous post was at 12:43 AM ----------
endera said:
Firmware for t95p ?
Click to expand...
Click to collapse
you could try asking these guys
http://freaktab.com/forum/tv-player...s/s905x/607678-sunvell-t95p-tv-box-2-8gb-wifi
I thought i read some 95z plus roms will work but not sure.
---------- Post added at 01:02 AM ---------- Previous post was at 12:49 AM ----------
endera said:
Firmware for t95p ?
Click to expand...
Click to collapse
similar cpu
http://chinagadgetsreviews.com/firmware-t95x-tv-box.html
(2GB)
T95ZPLUS-7.1-912-2GB-17.3-v1013
http://pan.baidu.com/s/1jl7jLOU
Pw: 81uc
The above link for 2GB is not working, also can you please clarify for which WiFi chip is the above firmware? There are three versions of T95Z Plus: WiFi 8830, WiFi 6330 and WiFi 6335. If one flashes the wrong version, then WiFi will not be working on his box...
Thanks for this thread. I am fighting with a T95z PLUS 3/32GB stuck on boot. I am going to try the above ROM (the one in gdrive is still available) as soon as I can get a USB cable, and report the results.
EDIT: Is there a way to flash from SD? I have no usb-to-usb cable to try right now, I am going to have to buy one and wait for it...
EDIT 2: Flashed through SD directly. Extracted the contents to a FAT32 formatted SD card and inserted it in the T95Z Plus. Booted normally and proceeded to "upgrade". The box is working right now. Sound are wifi are working - cannot say more than that so far. I don't know if the version is older than the original that came with the box, but I guess it should be possible to update if necessary (not sure how, though).
Thanks @kiwiman2000!
I can see from the boot screen that the firmware posted for the 3/32GB model by Kiwiman2000 with which I recovered my box is the 20170623 version. I know that the one my box had before rescuing it was 20170807, so it is possible that somewhere a newer version is available. The OTA updater is not finding anything online, though. In the meantime I will stick with this working version, and if I happen to find an update, I will post it here.
After playing around with the T95z Plus after installing the above firmware, I started noticing some bugs. First, the Play Store resets itself constantly. It seems every time it updates from the factory version to the current one, whenever you open it, it goes back to factory, asks for permissions again, and resets all settings.
I have tried to replace the system apk with an updated version. This works but only when starting it for the first time. It then fails to open, and will only open again after clearing the app data.
Does anyne know how to correctly fix a broken gapps?
Latest T95Z Plus Firmware. Android v7.1.1 For 2GB RAM/16GB S912 Chipset
Here is the latest firmware for the T95Z Plus Android tv box. Works on Sunvell, and also on Weily branded T95Z plus and probably all models with same chipset. Says android 7.1.2 but it’s actually 7.1.1. Latest firmware for this box tho. Runs great.
Google search “latest t95z plus firmware” and it’ll be the first site you see called entertainmentbox. I can’t post links here as I’m a new user.
You don’t need to use the male to male USB cable method to flash firmware. You can use Burn Card maker and update box using micro sd card. USB burn card maker can flash new firmware and also revive bricked Amlogic based android tv boxes.
search on YouTube for “t95z plus burn card maker” and there are many videos on how to use this method.
Hope this helps, it will get your box updated to Android v7.1.1 build T5ZP1013 kernel v3.14.29 android security patch level February 1, 2017 Model T95ZPLUS despite the build saying T5ZP1013. I assure you it’s the T95Z Plus firmware.
As for google play updating, then returning back to previous version and default settings every time I believe this is to keep the box running without breaking any apps or software for the current firmware. You really only need the version the firmware comes with. If you wish to update keep a lookout for future firmware releases. My box has the same issue as do others I have asked. I also like to have the latest version of everything too so this is what prompted me to check into the google play thing myself.
Happy Flashing!!! -~
T95z Plus will not flash
I have tried over 7 different roms, different usb, ect all the same result
UBOOT/Partition _aml_dtb/Verify patition/Error result can't pass 9%
What does that mean??
Hi friends, which application is responsible for display (LED) on the device?
victorsyt said:
Hi friends, which application is responsible for display (LED) on the device?
Click to expand...
Click to collapse
It's the WinS8Launcher system app. This also five the CEC options in the settings.
mr sharpey said:
It's the WinS8Launcher system app. This also five the CEC options in the settings.
Click to expand...
Click to collapse
Thanks. It's important.
I ran into this problem, since Kodi wasn't playing right. I used a script program universal init.d and supersu, and after supersu rebooted the device it hung on reboot. I have an easytone t95zplus but don't see any of their firmware posted online.
startreksuite said:
I ran into this problem, since Kodi wasn't playing right. I used a script program universal init.d and supersu, and after supersu rebooted the device it hung on reboot. I have an easytone t95zplus but don't see any of their firmware posted online.
Click to expand...
Click to collapse
You first need to determine the precise model to get the firmware:
1) Is it a 16 or 32 GB model?
2) Is it model q200 or q201?
You can check these by booting into recovery.
Need files for recovery
Hello guys, i need some dire help.
i have a 3G 32GB variant with AP6255.
my wifi was broken hence i browsed thru and was flashing the firmwares using tooth pick method.
1st attempt. - my recovery didnt boot at all. no HDMI signal was going to the TV
2nd attempt - managed to boot to recovery and flashed the firmware. wifi was not fixed.
3rd attempt onwards i could never get into recovery.
looks like my sd card marker is missing some boot files.
appreciate someone could guide me the extact steps and files i need for recovery to work.
archrival9 said:
looks like my sd card marker is missing some boot files.
appreciate someone could guide me the extact steps and files i need for recovery to work.
Click to expand...
Click to collapse
I am not sure of how to help you- but I will tell you this: I did not use a SD card maker. I just pasted the img file into the root of the SD card AND also included the extra files (which I believe are needed for proper boot and installing) from a different img file package I found somewhere else. So, tell me if this can make sense somehow:
Get the img file you tried to use in step 3 and put it in a SD along the extra files included in the package you used in the second attempt.
This is sort of the way I had to go to fix mine (although, for the sake of truth, my box is pretty unstable now - freeezes and hangs often). I hope an update would come out, but nothing so far.
Hi everybody, I'm just posting to let you know that I have very much upgraded my T95Z Plus 3/32 through the instructions in this thread, which includes firmware and recovery files.
Hopefully someone else can give it a try.
hello,
what / where is the last upgrade / custom rom for T95z plus 2/16gb S912 ?
Hi All,
I just got a mxq pro 4K S905W android 7.1.2.
In order to use an app (which detect root), i have to remove the pre-installed root. By looking at some forum i found a solution which consist to install superSU first to be able after to unroot my device.
After I installed SuperSu i rebooted and got stuck on "android" logo.. I tried a factory reset from recovery menu but nothing changed...
Now i want to try to install a fresh FW but i'm not able to found it out, i can only find FW for S905 or S905X but not for S905W.
Can someone help me on this issue. Or at least point me to the right FW (by the way i don't care to have android 7.x, 6.x is Ok).
Thanks!
edit: I tried to install S905X FW for android 6.0, but it failed. I think because downgrade are not allowed.
Do you think i can install FW for a different but really similar box like w95 tv box (found 7.1.2 fw for it)?
David_shimo said:
Hi All,
I just got a mxq pro 4K S905W android 7.1.2.
In order to use an app (which detect root), i have to remove the pre-installed root. By looking at some forum i found a solution which consist to install superSU first to be able after to unroot my device.
After I installed SuperSu i rebooted and got stuck on "android" logo.. I tried a factory reset from recovery menu but nothing changed...
Now i want to try to install a fresh FW but i'm not able to found it out, i can only find FW for S905 or S905X but not for S905W.
Can someone help me on this issue. Or at least point me to the right FW (by the way i don't care to have android 7.x, 6.x is Ok).
Thanks!
edit: I tried to install S905X FW for android 6.0, but it failed. I think because downgrade are not allowed.
Do you think i can install FW for a different but really similar box like w95 tv box (found 7.1.2 fw for it)?
Click to expand...
Click to collapse
I have a w95 box and had the same problem after installing SuperUser the box is stuck on "Please Wait" boot.
There is a Reset button on the base of the device but it seems to be inoperative ... I had the box for 2 days and it is now a paper weight (not eve it is really tiny and light).
There isn't seem to be a way to access the bootloader or Recovery...
Really frustrated now.
905x & 905w use different boards.
At the moment SuperSU will install but if you update it it will bootloop your box.
Look at other s905w forums I think there is a firmware for a s995w board but I don't have the link right now.
It could be in freaktab Forum
mxq pro 4k botloop after superSU update
any suggestions about this problem? I can't find new firmware. What can I do now?
pkatsifaras said:
any suggestions about this problem? I can't find new firmware. What can I do now?
Click to expand...
Click to collapse
https://www.chinagadgetsreviews.com/download-android-7-1-stock-firmware-mxq-pro-4k-tv-box.html
---------- Post added at 02:58 AM ---------- Previous post was at 02:55 AM ----------
rjbweb said:
I have a w95 box and had the same problem after installing SuperUser the box is stuck on "Please Wait" boot.
There is a Reset button on the base of the device but it seems to be inoperative ... I had the box for 2 days and it is now a paper weight (not eve it is really tiny and light).
There isn't seem to be a way to access the bootloader or Recovery...
Really frustrated now.
Click to expand...
Click to collapse
https://www.chinagadgetsreviews.com/download-amlogic-burn_card_maker-v2-0-2.html
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
I haven't been able to get any firmware to work in my Abox A1 Plus 2/8gb S905x. I don't have the original fw, and I can't find it anywhere.
I've read that some people were able to install Nexbox A95x firmware in this box, but I can't. The 6.0 firmware installs successfully (via USB), but it gets stuck at the logo when I connect the box to the TV. When I try Nexbox 7.1 firmware, the installation stops at 98% / 99% (error [0x30405004]UBOOT/Partition System/Verify partition/Error result ). I tried using the 'force/erase all', but didn't work.
Any ideas on how to solve this, or any users of this same box that can point me to a firmware that works?
http://www.mediafire.com/file/tc2vujexv235o4e/Gionee_A1_Plus_MT6757_0301_T5242_7.0.zip
samuau said:
I haven't been able to get any firmware to work in my Abox A1 Plus 2/8gb S905x. I don't have the original fw, and I can't find it anywhere.
I've read that some people were able to install Nexbox A95x firmware in this box, but I can't. The 6.0 firmware installs successfully (via USB), but it gets stuck at the logo when I connect the box to the TV. When I try Nexbox 7.1 firmware, the installation stops at 98% / 99% (error [0x30405004]UBOOT/Partition System/Verify partition/Error result ). I tried using the 'force/erase all', but didn't work.
Any ideas on how to solve this, or any users of this same box that can point me to a firmware that works?
Click to expand...
Click to collapse
Hi.
Can you give a link to this firmware ? Did you use short pin methods then connect usb male-male ??
I bricked device trying to install TWRP. This device comes rooted, but stock recovery was as stated below. Wanted to make backups.
It is supposed to be a S905L device with 1G/8G distributed by Diyomate in China. Build ROM was: NHG47L 20190924-test-keys Kernel arm v81
Original recovery was AMLOGIC/P201/P201/7.1.2/NHGL/20190924 , but all info I can find says board is a p212. And stock recovery came back with failure when trying to do Data reset.
I did have Libreelec working with p212 DTB. (P201 did not work)
Now board does not seem to be recognized by windows continuously try to connect via USB, but saying problem "not recognizing device"
Thanks for any help in advance.
tullyp
Doesn't anyone else have this box ? Still need a stock image.
whats your model?
check out here: ( use translater)
导读-最新热门 - ZNDS智能电视网 - 手机版
tullyp said:
Doesn't anyone else have this box ? Still need a stock image.
Click to expand...
Click to collapse
I have this box, how do I send you from mine?
xtr3mz said:
whats your model?
check out here: ( use translater)
导读-最新热门 - ZNDS智能电视网 - 手机版
Click to expand...
Click to collapse
D905, But is there something else?
Cyberavatar, thanks for your response. I have since given up on this and trashed the box.
Tullyp