Hi,
I've looked all over the internet( not only in the forum) for stock rom for my streamer a95x f3.
There is no one place that gives this rom and looks "Safe" to try on the device.
Is there anyone who has this device and change its rom and it works for him? I would love to get some help here. :angel:
Thanks.
Have you tried chinagadgetsreviews website?
They have one there.
Enviado do meu POCOPHONE F1 através do Tapatalk
TheBlackening said:
Have you tried chinagadgetsreviews website?
They have one there.
Enviado do meu POCOPHONE F1 através do Tapatalk
Click to expand...
Click to collapse
Find it there! thanks
I've tried to install it via sd card and the roms that they have there didn't work.
I tried in the next way:
1. Change the img file to a zip file
2. Copy the zip file to sd card
3. Tap on the recovery button at the streamer and plug in the power
4. In the android select the "Apply update from SD card"
5. Select the Zip file
I get the same error message with all the rom's I tried.
Any other suggestions?
You need to prepare the sd card with the program : burn card maker 2.0.3 or higher
Or you can flash it through a pc with : usb burning tool 2.2.0
But with this method you will need male-to-male usb cable.
There are many tutorials in YouTube, either for burn card makee or usb burning tool.
Enviado do meu POCOPHONE F1 através do Tapatalk
TheBlackening said:
You need to prepare the sd card with the program : burn card maker 2.0.3 or higher
Or you can flash it through a pc with : usb burning tool 2.2.0
But with this method you will need male-to-male usb cable.
There are many tutorials in YouTube, either for burn card makee or usb burning tool.
Enviado do meu POCOPHONE F1 através do Tapatalk
Click to expand...
Click to collapse
I've download the USB Burning tool 2.2.0 (I have the male to male cable) and I tried to install 5 different frimware's with no success.
Each time I get the next error message, Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi So i recently got a LG G2 but unfortunately the 16gb version, and what was worst is that you are only allowed to used 10gb:crying:
So as i love gaming, listening to my favorite music and watching awesome videos, I needed a way to get more space to hold everything..
Eventually I came across an App called FolderMount, unfortunately you need your device to be rooted for this app.
You will also need a OTG microUSB adapter.. Not sure if this will work on all devices:silly:
Here is a step by step guide on playing games off a USB drive:
1. Install FolderMount, get it from play store
2. Install your game( I'm installing Fifa 14)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Create an empty folder in storage/emulated/0/Android/obb/com.xxxxx ( blank sd data folder )
4. Copy the game sd data onto a USB drive and plug the USB drive into your Android device using an OTG microUSB adapter
5. Now open FolderMount and in the top right corner tap the "+" icon
6. You may enter the game name to make mounting a game easier.
7. By Source, select the empty folder created in Step 3
8. By Destination, select the game sd data folder on the USB drive
9. Check Screenshot_4 to see:cyclops: how it should look.
10. Now in FolderMount, tap the pin icon and wait untill it turns green
11. Finally enjoy your game:victory:
It works for every app, right?
LukaaBeck said:
It works for every app, right?
Click to expand...
Click to collapse
For small apps it should be pointless but for apps that hold more data, it should work.
Where did you buy the adaptor? And how large it is?
LukaaBeck said:
Where did you buy the adaptor? And how large it is?
Click to expand...
Click to collapse
Between 1-3 dollars.. its usually about 3-4 inches.
Awesome.. I have the 16gb version too. Thank you so much!
Enviado de meu LG-D802 usando Tapatalk
laleiz said:
Awesome.. I have the 16gb version too. Thank you so much!
Enviado de meu LG-D802 usando Tapatalk
Click to expand...
Click to collapse
My pleasure, glad i could be of service
Shi_Kid said:
My pleasure, glad i could be of service
Click to expand...
Click to collapse
I can't select any folder in /obb.
SeCKToR said:
I can't select any folder in /obb.
Click to expand...
Click to collapse
to select a folder you need to enter the folder itself. e.g enter /obb/com.xxxx(game data folder) then tap the tick in top right corner
Thanks
Thanks for sharing! May very well use this in the future.
EDIT - Typo in Description the box is 2gb/8gb
For some reason my brand new M96X box has decided to die on me all i'm getting is the red light. I've been trying to use "USB Burning Tool" but it keeps failing, I'm not even sure if i have the correct firmware for it.
The only way I can update it is by using the tool, There is NO reset button so i can't even get into recovery mode to install from the SD
The Error I'm getting from the USB Tool are in the log file attached
Any help with this would be much appreciated
Thanks
russellhearn69 said:
For some reason my brand new M96X box has decided to die on me all i'm getting is the red light. I've been trying to use "USB Burning Tool" but it keeps failing, I'm not even sure if i have the correct firmware for it.
The only way I can update it is by using the tool, There is NO reset button so i can't even get into recovery mode to install from the SD
The Error I'm getting from the USB Tool are in the log file attached
Any help with this would be much appreciated
Thanks
Click to expand...
Click to collapse
This is the box I'm trying to fix
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935F using Tapatalk
russellhearn69 said:
This is the box I'm trying to fix
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Hi,
My M96X mini seems to have the same board and there is a reset button on the other side of it. It would be strange if yours had not.
By the way: what firmware did you try to burn?
@russellhearn69 sorry for your troubles. how did it die? did you come home and it wasnt working or did you brick it trying to change the software? what error are you getting with usb burn tool?
urgodfather said:
@russellhearn69 sorry for your troubles. how did it die? did you come home and it wasnt working or did you brick it trying to change the software? what error are you getting with usb burn tool?
Click to expand...
Click to collapse
I bricked it with the USB tool. Wrote over the boot loader too. So I suppose the hardware is functional.
duntax said:
I bricked it with the USB tool. Wrote over the boot loader too. So I suppose the hardware is functional.
Click to expand...
Click to collapse
Yes, sounds like you just need to track down the right image for your device.
Tapatalk'd that biotch!
@russellhearn69 try this rom
Sorry for the late reply, Been really busy of late and not had a chance to get near a computer, anyway this is as far as i ever got with the usb tool.
i have that same hardware but name is GooBang Doo ABOX A1 PLUS
http://freaktab.com/filedata/fetch?id=718679&d=1523174869
http://freaktab.com/filedata/fetch?id=718681&d=1523174870
http://freaktab.com/filedata/fetch?id=718678&d=1523174869
http://freaktab.com/filedata/fetch?id=718677&d=1523174866
did you repair this box ? when i update firmware of the box in usb burning tool have same over and over error on any firmware
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
Hello,
I have similar problem with my M96X box.
Which USB cable did you use for the "USB Burning Tool"?
Kind regards.
Enviado desde mi MI 5 mediante Tapatalk
So, I've bought a Xiaomi Mi Pad 3 with a Chinese Rom, and I was following a tutorial to flash a new rom into it.
I basically did the following:
Installed MediaTek Drivers on PC
Opened "Smart Phone Flash Tool"
Specified Download-Agent as DA_SWSEC.bin and Scatter-loading File as the ROM
Unchecked preloader and clicked on "Download"
Connected the Xiaomi Mi Pad 3 to the computer while pressing Volume Down
Then, at this point, the computer crashed with a blue screen of death with the error "BUGCODE_USB_DRIVER". Here is the diagnosis of the error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, the Mi Pad won't turn on, won't respond to any button and is not recognized by the computer.... I think I might have hard-bricked it.
I've found a tutorial about recovering a Mi Pad 1, but one of the steps is to make a bridge in the SD Card slot, which Mi Pad 3 don't seem to have.
I'm a developer myself, I know my way on things, I have a VM Linux, I'm willing to open the tablet and do whathever it costs to recover it.
Please, what can I do??
Please, anyone?
I FUC*ING RECOVERED MY FUC*ING TABLET. FUC* YEAH!!!!!!!!!!!!!!
I don't know exactly what it was, but I kinda did the following:
- Installed the latest SP Flash tool from spflashtool.com on my PC
- Installed Mi PC Suite for drivers and such
- To help debug, I had a freeware called "Free Device Monitoring Studio", to better understand what's going on on my USB ports
- I was playing a little with the connection/desconnection of the device on my computer, trying to understand how it was. I saw that Kali Linux running under Oracle VM kinda recognized it as a Mediatek device, but couldn't do anything else than that. With that info, my hopes went a little higher, because it wasn't completely dead after all.
- I opened Flash tool, configured it to used the same ROM and files I was using when I bricked it, because I'm pretty sure they weren't the cause of the brick and clicked "Download"
- Then I began messing with the tablet trying to make it be recognized by SP Flash Tool, upon turning it on and off and switching USB ports and connecting them directly to the motherboard USB ports instead of the frontal USB ports
- Then at one point it suddenly recognized and started downloading and flashing the new ROM. I faced some errors but with Format all + Download and having to disconnect/reconnect the batery to make it recognizable again and some little tweaks here and there, it ended up working.
My tablet is working fine now
Hi!! I'm in vacations and I just bought my pocophone. I would like to transfer all my apps and data but I know that the only way of doing that is with a rooted phone cause there's no app that would do that, they only transfer the apk and that's it.
The phone had the bootloader unlocked but since I don't have a computer I can't find a way to install the twrp and the supersu directly from the phone.
I Google a lot but I couldn't find a way, is it possible? Is there any way of rooting (the whole process) without having a pc?
Thanks!
zorak20 said:
Hi!! I'm in vacations and I just bought my pocophone. I would like to transfer all my apps and data but I know that the only way of doing that is with a rooted phone cause there's no app that would do that, they only transfer the apk and that's it.
The phone had the bootloader unlocked but since I don't have a computer I can't find a way to install the twrp and the supersu directly from the phone.
I Google a lot but I couldn't find a way, is it possible? Is there any way of rooting (the whole process) without having a pc?
Thanks!
Click to expand...
Click to collapse
Tried mi mover which was in setting for poco F1. For none xiaomi phone, downloaded it from play store. Root phone were not necessary.
Sent from my Redmi 3S using Tapatalk
timberwolf60 said:
Tried mi mover which was in setting for poco F1. For none xiaomi phone, downloaded it from play store. Root phone were not necessary.
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Thanks a lot but I already tried it (its call Mi Drop now) but only moved apk, no data for apps. I had to login and reconfigured all my apps again manually.
zorak20 said:
Thanks a lot but I already tried it (its call Mi Drop now) but only moved apk, no data for apps. I had to login and reconfigured all my apps again manually.
Click to expand...
Click to collapse
No mi drop, mi mover located in settings > additional setting > scroll to the bottom and you will see it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi 3S using Tapatalk
timberwolf60 said:
No mi drop, mi mover located in settings > additional setting > scroll to the bottom and you will see it.
Click to expand...
Click to collapse
Sir i want to root my poco f1 without pc... Can u help me with that
Hi, I have a moto c plus moto c plus xt1726.
His USB port is damaged and doesn't work, but I was still able to install roms through TWRP.
The problem: Yesterday I tried
Install a Custom Rom through TWRP, but something went wrong.
The smartphone doesn't leave the blue logo anymore:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I accessed the recovery mode (Volume+ and Power). The installed rom seems to have modified the recovery interface, and now it looks like this:
The problem is I can't reinstall the rom.
I accessed "Apply Uptade", selected the sd card, then the rom(zip), but I get the error message:
I can't recover the moto c plus because the usb port doesn't work, and I also don't have access to android anymore, and consequently I don't have the TWRP anymore.
luizcrf said:
Hi, I have a moto c plus moto c plus xt1726.
His USB port is damaged and doesn't work, but I was still able to install roms through TWRP.
The problem: Yesterday I tried
Install a Custom Rom through TWRP, but something went wrong.
The smartphone doesn't leave the blue logo anymore:
View attachment 5335043
Then I accessed the recovery mode (Volume+ and Power). The installed rom seems to have modified the recovery interface, and now it looks like this:
View attachment 5335047
The problem is I can't reinstall the rom.
I accessed "Apply Uptade", selected the sd card, then the rom(zip), but I get the error message:
View attachment 5335049
I can't recover the moto c plus because the usb port doesn't work, and I also don't have access to android anymore, and consequently I don't have the TWRP anymore.
Click to expand...
Click to collapse
yes you can do it in many ways. SP tool is a little bit problematic. you can choose the simplest way on this planet. the software's name is rescue and smart assistant. it has a guide for lenovo/motorola customers.
1- download Rescue Lenovo from here
2- follow the exact procedure of the software.
pros: it will unlock device's code so you can have a very easy bootloader unlock using fastboot.
cons: it will remove twrp. (your's is already destroyed though)