Hi guys,
I just bought a good condition used Pocophone and everything seems ok, except one issue it keeps bothering me.
It cam with bootloader unlocked and custom ROM (Oxygen OS)
I am on Pixel Experience Rom now (Not sure if this might cause the issue) and I've noticed issues while changing the screen on the launcher. Sometimes the phone doesn't what to change the screen with a single swipe, I need to press harder on the screen to change it.
It is a software or hardware?
I've installed a touchscreen test apps and I haven't noticed anything unusual. everything went ok.
Here is a video about the issue.
https://www.youtube.com/watch?v=EIMcjLc1nzA
Anyone experience the same?
Im on latest pixpel experience rom.I had the same problem man. Here the link https://forum.xda-developers.com/poco-f1/development/rom-pixel-experience-t3967593
I solved it by installing a custom kernel i used optimus drunk kernel. It is a very good kernel.
Here the link https://forum.xda-developers.com/poco-f1/development/kernel-optimus-drunk-kernel-t3936450
Hope this helps
Dinokajo said:
Im on latest pixpel experience rom.I had the same problem man. Here the link https://forum.xda-developers.com/poco-f1/development/rom-pixel-experience-t3967593
I solved it by installing a custom kernel i used optimus drunk kernel. It is a very good kernel.
Here the link https://forum.xda-developers.com/poco-f1/development/kernel-optimus-drunk-kernel-t3936450
Hope this helps
Click to expand...
Click to collapse
Hey, thanks for your reply. I have tried all of the kernels and I have been switching a couple of CUSTOM ROM, none seems to work.
Did anyone been in the same experience, what have you done to solve it?
Should I replace the touchscreen?
Related
Ok, so ive had a couple of problems with my recently bought Sgs2, ive got all the other problems fixed except this one: when i turn on the camera app, the flash goes on and off once, the same happens when i turn off the camera. Its a very fast flash that occurs.. it doesnt matter what camera app i use, it does it everytime.. the flash does work properly during camera use if needed, and works normally as a torch.
It doesnt bother me much, but would be nice to get fixed..
Any ideas?
If your using a custom jb rom then it's normal. It's a known bug.
Sent from my Galaxy SII
*boy*racer* said:
If your using a custom jb rom then it's normal. It's a known bug.
Sent from my Galaxy SII
Click to expand...
Click to collapse
Im using SlimICS 4.2+ Siyah 5.0.1
So he said.... That if You using not stock rom flash bug be...
Looks like he said: if its a custom JB rom, the bug occurs. Im using ICS and the same thing happened before i even flashed a custom rom. The phone was running a stock Samsung GB rom then..
"He" has a name
And if u said it happened before flashing roms, Then it must be a hardware issue.
Sent from my Galaxy SII
I have the same problem, that the flash will light up shortly when the camera app closed, and when I read the last comments it seems that this is a known issue for quite a while.
How does it come that this is not fixed yet. I'm using custom roms now for a few month now and from the beginning I was wondering about the strange flash behaviour compared to the stock rom.
Is it because there is still no official release from Samsung for JB or why is it so difficult to fix? Are the camera drivers closed source?
*boy*racer* said:
"He" has a name
And if u said it happened before flashing roms, Then it must be a hardware issue.
Sent from my Galaxy SII
Click to expand...
Click to collapse
I feared this was the issue.. oh well, i guess ill just have to live with it until i change my phone again, no biggie
elfrawg said:
I have the same problem, that the flash will light up shortly when the camera app closed, and when I read the last comments it seems that this is a known issue for quite a while.
How does it come that this is not fixed yet. I'm using custom roms now for a few month now and from the beginning I was wondering about the strange flash behaviour compared to the stock rom.
Is it because there is still no official release from Samsung for JB or why is it so difficult to fix? Are the camera drivers closed source?
Click to expand...
Click to collapse
It happened to you after switching to custom roms?
elfrawg said:
I have the same problem, that the flash will light up shortly when the camera app closed, and when I read the last comments it seems that this is a known issue for quite a while.
How does it come that this is not fixed yet. I'm using custom roms now for a few month now and from the beginning I was wondering about the strange flash behaviour compared to the stock rom.
Is it because there is still no official release from Samsung for JB or why is it so difficult to fix? Are the camera drivers closed source?
Click to expand...
Click to collapse
Mongopusher42 said:
I feared this was the issue.. oh well, i guess ill just have to live with it until i change my phone again, no biggie
Click to expand...
Click to collapse
Guys, it has got nothing to do with the hardware, its a random one that happens with all ICS and JB based custom roms
@Sun90
If you read the whole thread , i had the problem before custom roms with a 100% stock Samsung GingerBread rom..
Mongopusher42 said:
@Sun90
If you read the whole thread , i had the problem before custom roms with a 100% stock Samsung GingerBread rom..
Click to expand...
Click to collapse
have u tried flashing a Stock ICS rom (v4.0.3) and seen for the issue
if not give it a try and see, just to confirm whether its really a hardware issue or a software one
nothing to loose though, if the problem gets resolved for u it would be fine right
do a clean wipe before installing.
Sun90 said:
have u tried flashing a Stock ICS rom (v4.0.3) and seen for the issue
if not give it a try and see, just to confirm whether its really a hardware issue or a software one
nothing to loose though, if the problem gets resolved for u it would be fine right
do a clean wipe before installing.
Click to expand...
Click to collapse
Nope. Okk , ill try this when i have some spare time :thumbup:
Sun90 said:
Guys, it has got nothing to do with the hardware, its a random one that happens with all ICS and JB based custom roms
Click to expand...
Click to collapse
I used to get that on my x10i with certain roms.Definitely a software problem.
Same issue here, came about randomly day before yesterday. LED flashes once, quickly, whenever something tries to activate it.
Only ever used stock soft/firmware, and Chainfire's kernel. Cleared all caches, tried factory reset, problem persisted.
Flashed to whatever the latest ICS is for H3G today, problem still persists, I shall try official kernel tomorrow, see if that fixes it -- I don't hold much hope.
*boy*racer* said:
If your using a custom jb rom then it's normal. It's a known bug.
Sent from my Galaxy SII
Click to expand...
Click to collapse
I'm using hellybean 4.2.1 and I don't have this bug!!
(Sorry for my english) Hi folks, I have a problem... using the search button I saw many threads talkin' about touchscreen's problems.
I tried with the many solutions over there, but my problem is different.
I installed the Legacy Xperia 4.3 Rom, after that, my phone starts to have problems with the touch.
When I used the sliding qwerty keyboard, touch doesn't work, but when I used my phone in vertical mode, it works for a couple of seconds.
Then, I remove the Rom and I used the 4.2.2 Rom from Legacy Xperia.
The touchscreen doesn't work even in the recovery menu. At first I thought that it was a hardware problem, but when I replace my touchscreen the problem still doesn't fix. I noticed another thing. I can't flash >4.1 kernels anymore. I tried to flash the same 4.3 kernel that bricked my touch and my phone doesn't boot at all. With another kernel, my phone turns on properly. Please, help me... :crying:
Kafei said:
(Sorry for my english) Hi folks, I have a problem... using the search button I saw many threads talkin' about touchscreen's problems.
I tried with the many solutions over there, but my problem is different.
I installed the Legacy Xperia 4.3 Rom, after that, my phone starts to have problems with the touch.
When I used the sliding qwerty keyboard, touch doesn't work, but when I used my phone in vertical mode, it works for a couple of seconds.
Then, I remove the Rom and I used the 4.2.2 Rom from Legacy Xperia.
The touchscreen doesn't work even in the recovery menu. At first I thought that it was a hardware problem, but when I replace my touchscreen the problem still doesn't fix. I noticed another thing. I can't flash >4.1 kernels anymore. I tried to flash the same 4.3 kernel that bricked my touch and my phone doesn't boot at all. With another kernel, my phone turns on properly. Please, help me... :crying:
Click to expand...
Click to collapse
Have you tried flashing stock ICS .ftf file?
Grof87 said:
Have you tried flashing stock ICS .ftf file?
Click to expand...
Click to collapse
Yes... I tried many solutions, like Aroma method, Active ROM method, flash stock ics rom metod, but nothing changed. I think that my problem must be a software problem because now I can't flash any >4.1 kernel.
Kafei said:
Yes... I tried many solutions, like Aroma method, Active ROM method, flash stock ics rom metod, but nothing changed. I think that my problem must be a software problem because now I can't flash any >4.1 kernel.
Click to expand...
Click to collapse
Try flashing the following combination :
Lupus Jb v7 kernel (link : http://goo.im/devs/wedgess/LuPuS-MPDI-Kernels/JB/mango)
Hepta Error Rom (link :http://forum.xda-developers.com/showthread.php?t=2336571)
I swear mini pro feels like its possessed or something (generally speaking )
For me, the LegacyXperia ROM and its kernel always gave problems with touch and my right soft key would go haywire. The only stable combination that worked for me is the one I posted above. Try it, and see if it helps!
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Click to expand...
Click to collapse
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Darkened_Sky said:
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Click to expand...
Click to collapse
I tried with both stock and temasek once again and the touch screen still does not respond. I always used cwm for recovery though, and did a factory reset on the stock recovery once to see if that works. I can flash ultima as well I suppose but I am not sure if that will fix it.
Edit: I tried to flash ultima but the installation steps required the use of touch screen so I could not proceed.
Are you sure that you download Temasek's rom for I9300 not for another model? Because Temasek supports more devices.
And on Temasek's thread I didn't find any user complaining about touch screen issue after installing it,so I think that you flashed it for different model.
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Click to expand...
Click to collapse
Flash back to stock with odin if problem is still there then it is hardware issue....
I rechecked and it is temasek for I9300. I restocked ofc with odin and it is no use tbh. I mean it is weird as the first time I flashed stock rom the touch screen was not working for 30 seconds or sth than it started working so I was really happy for a second.. After another flash it was not working and I was like yea it will work soon, but it didnt. I tried with loads of roms and kernels and it is still no use.
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Darrier said:
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Click to expand...
Click to collapse
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Solution
Hey dude, I couldnt find any solution to that problem. What I did was to send it in for replacement but with warranty. For that you need to triangle away your phone and also install the official firmwares. I had to use a mouse in order to do that but you will need a usb to micro usb converter, which is not that hard to find( and also cheap). They couldnt tell that I installed unofficial firmware, I replaced my screen flawlessly. You can find how to triangle away your phone in this forum and also sammobile is the place to look for official firmware.
Cheers
wanerza77 said:
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
After flashing various roms,I finally decided to try mui v5 cm. After porting from slimsaber to mui, I noticed that the bottom part of my screen wouldn't respond to touches anymore,I tried flashin other roms but same issue still persist atimes it would work with some roms for few minutes after flashing and would stop. Am a bit confused cause somthing tells me it has nothing to do with my hardware, Pls guys help me with a possible guide or solution as to wah might be wrong
Back to stock firmware with Odin and test if it works. If not its hardware.
andrewwright said:
Back to stock firmware with Odin and test if it works. If not its hardware.
Click to expand...
Click to collapse
had that in mind, just hope it works......thanks
hi,
i just installed sense 6 rom, and now i cannot turn on wifi anymore.
I have the international HTC One Max with hboot 2.49.0000
the rom i installed was this one: http://forum.xda-developers.com/showthread.php?t=2700211
The kernel i used was from here: http://forum.xda-developers.com/showthread.php?t=2728103
i tried version 2.1 aswell 2.2
i fully wiped everything i could and i'm sure im fully rooted.
before flashing the rom this worked great so im sure its not defect hardware.
How can i fix this?
IMarks said:
hi,
i just installed sense 6 rom, and now i cannot turn on wifi anymore.
I have the international HTC One Max with hboot 2.49.0000
the rom i installed was this one: http://forum.xda-developers.com/showthread.php?t=2700211
The kernel i used was from here: http://forum.xda-developers.com/showthread.php?t=2728103
i tried version 2.1 aswell 2.2
i fully wiped everything i could and i'm sure im fully rooted.
before flashing the rom this worked great so im sure its not defect hardware.
How can i fix this?
Click to expand...
Click to collapse
Bro, I suggest you report any experiencing problems here as suggested by @Flyhalf205
https://docs.google.com/document/d/1heV9QFdKBhD6iUPrPcdRFwiSVRqa5QcH3iHl0JVS484/edit?usp=sharing
thanks but thats not a solution to the problem. The problem is known, and i know that.
But i hear people reacting on the wifi issue thats they solved the issue but its unclear how, since i installed the same stuff, even the insecure kernel.
IMarks said:
thanks but thats not a solution to the problem. The problem is known, and i know that.
But i hear people reacting on the wifi issue thats they solved the issue but its unclear how, since i installed the same stuff, even the insecure kernel.
Click to expand...
Click to collapse
FYI, most wifi problems cause by kernel. You may try flash different kernel. Here we got Flykernel & Lunar Max Kernel. Give it a try.
http://forum.xda-developers.com/showthread.php?t=2762319
@IMarks
Flashing the custom kernel still doesn't give you WiFi?
I fixed the issue, the insecure kernel and flykernel didnt work but the lunar kernel did.
still one issue though, media audio doesnt work over bluetooth, system audio / call audio seems fine however. i tried with beats audio on and off but it didn't make a difference.