my phone doesnt't boot using power button. it only boots when it's conected to the computer (the green led comes, and after a coulpe of minutes it boots) but doesn't pass the M logo (which by the way is teared beacuse of the ROM (epinter 4.2) <--- that is normal) i try to enter fastboot mode by hitting the vol down (or up) button when booting but it can't enter fastboot mode.
i've searched this problem but none seem to have it my way (i mean no boot, no fastboot). any help would be apreciated.
Code:
adb shell toolbox reboot bootloader
Today i had flashed latest china dev fastboot ROM in Redmi Note 3 SD.
After succesfull flashed i had flashed TWRP 3.0.2-2
Then wiped all & flashed RR N.
Whenever i tap reboot to recovery or reboot to fastboot from power menu, Device starts normally not in recovery or fastboot.
Tried 3-4 times by flashing TWRP via fastboot mode but every time whenever i want to go recovery or fastboot i must have to press vol+ & power or vol- & power simultaniously.
Any Solution...?
Power key + volume up for recovery mode.
Power key + volume down for fastboot mode.
Edit: Sorry, I misread the question. I think it is a ROM problem.
Hello,
as I wrote in this (now locked) thread, I installed Superior OS and got stuck in bootloop. I get "Galaxy S9+" screen followed by system bootanimation, which repeats itself indefinitely. It doesn't restart by itself, it just boots endlessly.
The problem here is that I can't access recovery or even download mode. I tried to restart (power + volume down) and then quickly press combination to access recovery or download mode. No luck. I couldn't even turn the damn phone off. I just kept restarting.
So I let it drain the battery hoping I could then power the phone on with correct key combination. I tried holding bixby button + volume down while inserting USB. It just started booting up to system with boot animation. I tried holding bixby + volume up, or even power + bixby + volume down. No luck either.
I got correct USB drivers installed, as I flashed the phone with Odin in the past. Odin recognizes phone while it sits on boot animation, but it won't start flashing. ADB or fastboot do not work on bootanimation, as the ROM is freshly installed. I presume it has ADB turned off by default...
I'll be grateful for any ideas and suggestions.
No escape , man. I tried all ( check this rom for galaxy note 9 )
Nice...
I went to service center, they said they can fix it for me. 40 euros for reflash (download mode isn't necessary), 100 euros for complete unbrick. I hope the unbrick isn't necessary and the bootloader is intact. I'll post with update.
1- I unlock the bootloader
2- Flash PBRP
3- Flash Pixel Experience
4- Flash Stock Rom
5- Flash Stock recovery
6- Lock Bootloader
After relock the bootloader the phone never turns on, only have a blackscreen, and when i connect to PC, sounds when are conected, and recognize, but only a 5 seconds later disconects, and connect again, and disconect again. A loop.
Please I need any solution, dont have money for other phone ):
Can you enter recovery mode?
Vol down + Power
Btw... why did you lock the bootloader again??
Also, you flashed a custom recovery and a custom rom...and then you flashed the stock recovery and rom over them? Did you regret or something like that and tried to flash everything to stock again?
I needed a Google Play certified device /:
And no, can´t enter on recovery
edit: i want stock phone again
Ah you needed to pass safety net, Ok, you can still pass safety net with custom rom and root, but its your call in the end.
Try volume up when it tries to turn on, or try a combination of vol down + vol up.
Start playing with button combination, also try to see if you can shut it down completely by holding power and vol down for 20 secs~
Now that i think...your PC recognised the phone, so maybe you can go into recovery with adb, do you have adb on your pc?
Can´t turn on, nothing, incluided Realme logo in white, less bootloader and recovery, nothing ):
Try this method https://forum.xda-developers.com/t/...6s-using-spflash-tool-for-free.4222027/unread
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
My M4 (E2312) have pretty much the same symptoms: can not boot anything and just stuck on SONY logo, Flashtool does not recognize phone in flashmode (Vol -), just fastboot. And using fastboot to flash system, boot, recovery shows finished processes but phone does nothing new. And phone does not response well to USB, only after a reset then it updates the status.
I have Pexo ROM v3, custom TWRP, SkyMelon 9 I think,Rooted SuperSU and Magisk( has conflicts so when I boot some pop up says X app has stopped working. When I install some more apps to use it was ok, then the pop ups show up more and more and then it decides to boot loop to the stage we are now.
I have tried install 0.9.33 and 0.9.23.1( somehow only 0.9.23.1 can install 3 drivers), Xperia Companion, Emma, ggsetup 3.2.0.1, Driver SONY so0104 (so0113 ADB interface- status show it cannot start),
So either it is the drivers on computer, the computer USB ports, the phone's software or hardware defects lead to software that caused it.
bdnlspam said:
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
Click to expand...
Click to collapse
Yes, I also tried installing conceptify but it doesnt work. At this point its better if you stick with the stock rom, remove as much bloatware as possible and consider it a phone because almost none of the ROMs here work stability wise, or they maybe stable but some features like display brightness or speakers dont work. So I recommend you install stock rom via flashtool and then unlock the bootloader via flashtool again and install twrp again. Also if possible try reinstalling the drivers for the phone in flashtool. Hope this works mate.
Not my name said:
Also if possible try reinstalling the drivers for the phone in flashtool.
Click to expand...
Click to collapse
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
bdnlspam said:
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
Click to expand...
Click to collapse
Can you try it on a Linux PC I guess?