UNBRICK BLACKSCREEN? (SOLVED) - Realme 6 Questions & Answers

1- I unlock the bootloader
2- Flash PBRP
3- Flash Pixel Experience
4- Flash Stock Rom
5- Flash Stock recovery
6- Lock Bootloader
After relock the bootloader the phone never turns on, only have a blackscreen, and when i connect to PC, sounds when are conected, and recognize, but only a 5 seconds later disconects, and connect again, and disconect again. A loop.
Please I need any solution, dont have money for other phone ):

Can you enter recovery mode?
Vol down + Power

Btw... why did you lock the bootloader again??
Also, you flashed a custom recovery and a custom rom...and then you flashed the stock recovery and rom over them? Did you regret or something like that and tried to flash everything to stock again?

I needed a Google Play certified device /:
And no, can´t enter on recovery
edit: i want stock phone again

Ah you needed to pass safety net, Ok, you can still pass safety net with custom rom and root, but its your call in the end.
Try volume up when it tries to turn on, or try a combination of vol down + vol up.
Start playing with button combination, also try to see if you can shut it down completely by holding power and vol down for 20 secs~

Now that i think...your PC recognised the phone, so maybe you can go into recovery with adb, do you have adb on your pc?

Can´t turn on, nothing, incluided Realme logo in white, less bootloader and recovery, nothing ):

Try this method https://forum.xda-developers.com/t/...6s-using-spflash-tool-for-free.4222027/unread

Related

My phone has been bricked

Please help. My s3 can only boot into twrp logo and stays there while flickering every few seconds. I have tried the volume up, power button and home button thing and still it does nothing but reboot to the same place. In short, I cannot enter recovery mode to re-flash my phone.
What about download mode? Volume down Power and Home button?
savor_savvy said:
Please help. My s3 can only boot into twrp logo and stays there while flickering every few seconds. I have tried the volume up, power button and home button thing and still it does nothing but reboot to the same place. In short, I cannot enter recovery mode to re-flash my phone.
Click to expand...
Click to collapse
What about entering download mode ? As it was stated above ? Then you can download last stock firmware for your region and flash it via Odin. Good source of original firmware is //samsung-updates.com/. Odin is available at many sites. If you run Win7 (or higher) on your PC you do not need any additional software, if not - proper drivers to see your mobile will be required. Then, if you do not want to stay with stock ROM, you can flash custom recovery and finally custom ROM chosen from dozens of them...

Recovery Mode

Hi,
I know this has been covered thoroughly, but I have a particular problem that I haven't been able to find a solution for.
I have the Xiaomi Redmi Note 2 Prime, MIUI 6. I'm trying to boot into recovery mode either one of two ways: holding down volume up + power, or going through the 'Update' app options. Both times, the same thing happens: The phone starts up with the Mi logo, hangs for about 20 ish seconds, reboots as normal. It doesn't at any stage enter recovery mode. Holding down volume down + power takes me to Fastboot, but it hangs on the fastboot screen infinitely..
Any thoughts?
Chris
are you want to flash something ? try flash with updater app, rename zip file you want to flash to update.zip, and do flash with updater. its will enter recovery mode and flah zip file
Pendekar7 said:
are you want to flash something ? try flash with updater app, rename zip file you want to flash to update.zip, and do flash with updater. its will enter recovery mode and flah zip file
Click to expand...
Click to collapse
I have tried that, same thing happens.
To clarify, whenever I try to enter recovery mode, the phone starts up, vibrates, Mi logo appears, hangs for about 10-15 seconds, turns off, turns on, vibrates, Mi logo appears, "Powered by Android" appears, phone starts up normal.
dundy2456 said:
I have tried that, same thing happens.
To clarify, whenever I try to enter recovery mode, the phone starts up, vibrates, Mi logo appears, hangs for about 10-15 seconds, turns off, turns on, vibrates, Mi logo appears, "Powered by Android" appears, phone starts up normal.
Click to expand...
Click to collapse
try quick reboot app in play store, but it required root
i'm afraid you have fake phone i hope not, try cpu z for check that
Pendekar7 said:
try quick reboot app in play store, but it required root
i'm afraid you have fake phone i hope not, try cpu z for check that
Click to expand...
Click to collapse
Hmm I will try to install that app. Right now the phone wont get past the boot screen, it is just hanging on the Mi logo and Powered by Android.
Thanks
Try to flash the stock recovery.
Then you should be able to boot into stock recovery and wipe all data.
After that the phone should boot.
At least that worked for me
facicing same problem
same problem i am facing. Not able to boot in recovery mode using nandroid manager, mobile uncle, system updater, volume down + power.
additional info: i had rooted my phone and installed chinese miui rom.
sagaroct said:
same problem i am facing. Not able to boot in recovery mode using nandroid manager, mobile uncle, system updater, volume down + power.
additional info: i had rooted my phone and installed chinese miui rom.
Click to expand...
Click to collapse
If you have rooted phone, try to flash recovery (TWRP) over terminal, with dd.
You have trashed the recovery partition. Reboot in fastboot mode (Vol- + PWR) and reflash TWRP.img via fastboot on a PC.
Command:
fastboot flash recovery recovery.img
Rename the twrp.img to recovery.img or change the name used in the command. There are plenty of tutorials out there on how to use fastboot.
Do not let the phone boot up after flashing!!!! You will end up back with the same problem. Hold down Vol+ to boot into Recovery mode for the first time.

Somehow I Can't get to EDL mode

I just officialy unlocked my bootloader because I Can't enter EDL mode somehow. Tried everything, EDL scripts, adb, holding the volume buttons...
The phone always restart the the system (it works fine). This is weird because I can't do factory reset either, it always boots back into my system.
Can somebody help me in this?
If you have an unlocked bootloader, why do you need to go to EDL mode instead just use fastboot.
Care to explain better?
The issue is: I flashed TWRP with fastboot. When I try to boot into it (Holding Volume up + power) i just get back into system.
This is just weird, as I can't do a Factory Reset either!
Download edl7.zip file from xda thread and go into fastboot mode and double tap on cmd file...your device will go in edl mode (red led blink)
Zerei said:
Care to explain better?
The issue is: I flashed TWRP with fastboot. When I try to boot into it (Holding Volume up + power) i just get back into system.
This is just weird, as I can't do a Factory Reset either!
Click to expand...
Click to collapse
EDL is for flashing fastboot files for locked bootloader as flashing through fastboot doesn't work. If your bootloader is unlocked you can just use fastboot. For TWRP are you getting any error while flashing it, if not you should boot into TWRP by holding volume down and power button with your phone turned off.
harishmenace said:
EDL is for flashing fastboot files for locked bootloader as flashing through fastboot doesn't work. If your bootloader is unlocked you can just use fastboot. For TWRP are you getting any error while flashing it, if not you should boot into TWRP by holding volume down and power button with your phone turned off.
Click to expand...
Click to collapse
Hey man. Thank you for your help. But I think that I'm not being clear on what my issue is. I have some experience on flashing twrp and rooting. But never faced something like this before.
I can't even do a factory reset (from the settings menu) as the phone restarts and just goes back to the system. I flashed twrp but when I try to boot into it I get back to the system. I try to reboot into bootloader via the update menu and the phone resets and just get back to system.
It's just as if I can't acess the bootloader menu at all.
That never happened, try holding volume button before pressing power button. You can also try it through adb, make sure you have usb debugging turned on. For fastboot use adb reboot bootloader and for recovery adb reboot recovery
harishmenace said:
That never happened, try holding volume button before pressing power button. You can also try it through adb, make sure you have usb debugging turned on. For fastboot use adb reboot bootloader and for recovery adb reboot recovery
Click to expand...
Click to collapse
Yeah, tried that too. This is just way too weird to be normal. I'm sure that I did everything right.

Can't boot in fastboot mode

Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
power off the phone, put USB port in phone, press volume down key, now connect USB port to PC with volume down key press. it should boot to fastboot.
Rob1hn said:
Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
Click to expand...
Click to collapse
Try this command
Code:
adb reboot fastboot
miststudent2011 said:
Try this command
Code:
adb reboot fastboot
Click to expand...
Click to collapse
hi. Please, help, i cant reboot to fsstboot. If i do this from app or from adb my phone just reboots twice. I can boot into recovery and into download mode
Don't reboot into fastboot, boot into fastboot.
1st hold the up and down and power to start up so that it shows more than that "...is now booting". Then power off and press "down" and "power" with USB plugged to enter fastbboot. In fastbbot, flash the userdata.img and the cache.img (This cleans data and cache totally) from Huawei's updates, then you will be able to get into TWRP without being stucked.

M4 Aqua (E2303) bricked - fastboot works but weirdly, flashmode does not

Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
My M4 (E2312) have pretty much the same symptoms: can not boot anything and just stuck on SONY logo, Flashtool does not recognize phone in flashmode (Vol -), just fastboot. And using fastboot to flash system, boot, recovery shows finished processes but phone does nothing new. And phone does not response well to USB, only after a reset then it updates the status.
I have Pexo ROM v3, custom TWRP, SkyMelon 9 I think,Rooted SuperSU and Magisk( has conflicts so when I boot some pop up says X app has stopped working. When I install some more apps to use it was ok, then the pop ups show up more and more and then it decides to boot loop to the stage we are now.
I have tried install 0.9.33 and 0.9.23.1( somehow only 0.9.23.1 can install 3 drivers), Xperia Companion, Emma, ggsetup 3.2.0.1, Driver SONY so0104 (so0113 ADB interface- status show it cannot start),
So either it is the drivers on computer, the computer USB ports, the phone's software or hardware defects lead to software that caused it.
bdnlspam said:
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
Click to expand...
Click to collapse
Yes, I also tried installing conceptify but it doesnt work. At this point its better if you stick with the stock rom, remove as much bloatware as possible and consider it a phone because almost none of the ROMs here work stability wise, or they maybe stable but some features like display brightness or speakers dont work. So I recommend you install stock rom via flashtool and then unlock the bootloader via flashtool again and install twrp again. Also if possible try reinstalling the drivers for the phone in flashtool. Hope this works mate.
Not my name said:
Also if possible try reinstalling the drivers for the phone in flashtool.
Click to expand...
Click to collapse
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
bdnlspam said:
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
Click to expand...
Click to collapse
Can you try it on a Linux PC I guess?

Categories

Resources