While I was flashing the magisk boot.img to realme 1 (CPH1859) the phone bricked and is in boot loop now .
Screen shows Realme Powered BY ANDROID and Orange state warning and if trying to go into recovery the phone boots to fastboot mode and recovery not shows up.
I tried flashing from fastboot but it doesnot work and goes to bootloop again.
Help me with this please.
same problem here pease help
First do some research before flashing and always take nandroid backup to be safe.
Flashed the wrong boot.img i.e it's old one not the updated.
Your phone is in fastboot mode, try to flash or boot into twrp recovery and now flash the official stock rom that's it, now phone should start as normal.
Related
I tried to install custom rom in my lenovo p70, I successfully flash TWRP and I backup my device before proceeding in flashing this rom in "www.needrom.com/download/vibeui-3-5/". After I backup my device, I proceed in installing the rom using twrp but when it says reboot, my phone stuck in boot logo and keeps on restarting. The "Volume up + power button" still working and I got a chance in selecting recovery mode but when I choose it, it just stuck in boot logo and restart again. I tried flashing the TWRP again but no luck, I can't enter in recovery mode to restore my backup :crying::crying::crying: Please I need help
Assuming the backup via twrp is still in the internal storage, go to fastboot and boot the twrp image (fastboot boot *twrp.img*) and restore.
I'm stuck in fastboot sir. My previous ROM is android 4.4.4 64bit. Can I flash the stock rom using flashtool?
pryxen said:
I'm stuck in fastboot sir. My previous ROM is android 4.4.4 64bit. Can I flash the stock rom using flashtool?
Click to expand...
Click to collapse
Download ADB and Fastboot tool. Place the custom recovery image on the ADB and Fastboot folder. Turn on the device and go to fastboot then connect it to the computer. Open terminal/cmd: fastboot boot "name_of_the_recovery.img"
It should boot the custom recovery then you can restore your backup.
Or just flash the stock rom if you have it.
I also have the same problem. my stock rom on Lenovo-P70-A was kitkat 4.4.4. 32bit. i tried to install CM-13 64bit by following the procedure on this link: http://www.lenovoroot.com/2016/10/cyanogenmod-130-for-lenovo-p70-fully-working.html . but something went wrong. i flashed P70A_AOSP_5.1_64bit_v2 using SP Flash tool and then flashed cm-13.0-v1-UNOFFICIAL-P70 but when i rebooted the phone, it is in continous bootloop. turns on, shows logo for some seconds then again boot. i can go into fastboot mode but can not get into recovery. prevously my phone was rooted and i made backup with twrp on my usb flash but now how can i restore my backup from usb flash. i can not boot into recovery even from fastboot and can not flash twrp or other recovery from fastboot.
any help would be appriciated.
thanks in advance.
UPDATE: BOOT LOOP LENOVO P70-A PROBLEM SOLVED.
Before when i posted the bootloop problem. i was unable to turn off the phone and without turning off properly I was unable to flash stock rom with SP Flash Tool, but after searching i found this thread : https://forum.xda-developers.com/nexus-4/help/removable-battery-how-to-shut-phone-t1964992 .In this thread I found how to turn off a phone with a non removable battery. During bootloop when Logo appeared i kept press power button at least for 10 seconds and then phone powered off and no more boot loop. so I was able to flash stock image using SP Flash tool. now my problem solved and phone is working fine.
Hello everybody!
The last day my phone got stuck on bootloader screen. It just wouldn't boot the OS.
So I tried to fix that by flashing other rom. I have unlocked it trough MiUnlock.
Flashed in fastboot TWRP(rosy) recovery. It could boot TWRP but after a reboot, would launch MiRecovery.
After that the Android didnt start no more. After a new flash of TWRP I was able to enter recovery. I tried to flash a custom rom. After that the VOLUME UP + POWER wouldnt launch recovery no more (Also VOLUME DOWN+UP+POWER buttons, wont boot the Recovery)
Now i found an EDL mode to flash rom through XiaoMiFlash. Did it, Made the steps from tutorials. That, has changed the device to COM10 in MiFlash which let me try different official roms, and i always get the same error message: cannot receive hello packet, MiFlash is trying to reset status!
Also tried too flash a recovery img.
Tried everything i found on that, nothing worked to get those packets...
My only hope was to fastboot flash recovery TWRP or MiRecovery. And then flash new rom to fix my phone.
Tried many version of Twrp, but no success to actually flash.
I have tried removing recovery via adb and flashing another. Logs shows success but no effect on phone.
Still can't acces recovery mode on my phone.
Bootloop stuck. Shows MI logo and that its Unlocked.
Doesnt work flashing via fastboot - TWRP or MiRecovery images.
My phone is bricked for a week now. Please share a solution if you got one.
SOLVED
Good news. finally flashed chinese version through miflash tool.
had to rename some files from rom.
Flashed through BOOTLOADER.
Yesterday i unlocked my bootloader from htcdev and i flashed boot.img (since i am an s-on)by applying fastboot flash boot boot.img and then i flashed twrp then i applied fastboot reboot and i am stucked on htc logo screen . Neither recovery opens . Plz help the thing i can open is fastboot mode . I have HTC One x ( International tegra 3 ) Tell me whether i have flashed wrong recovery or boot.img . Or tell me how to delete the flashed boot.img so that i can reload my stock rom . I have not installed any rom so my stock rom is safe.
Plz help me
Flashing boot.img is not necessary. Try re-locking and unlock the boot loader. Or try returning to 100% stock and start from scratch.
Hello! This is my first thread on the forum;
I'm writing because I think I soft bricked my Xiaomi Mi Pad 4 LTE, let me explain from the very beginning.
It's a brand new device, bought today, and with a custom italian ROM which was sold with.
I just wanted to root it, and the bootloader was already unlocked because it was a custom ROM, so I tried to install TWRP (mocha version for Mi Pad) with Fastboot and then I wanted to install Magisk.
The issue is that, when I tried to flash TWRP to recovery with fastboot flash recovery twrp.img, it all went "OK" but then TWRP was not actually flashed and couldn't boot it with key combinations, it just looked like it wasn't there. I also tried to boot it without flashing, with fastboot boot twrp.img but it gave me
"Failed to load/authenticate boot image: 00000050" error
Looking on the web, I found someone who told to try fastboot flash boot twrp.img and so, without even thinking, I did it.
That's the main issue. I rebooted, and found that TWRP started, but now I couldn't boot my device anymore, because the default boot.img file was replaced by twrp.img. So, practically, TWRP replaced my device's default system (I think?).
Then, I tried to find a stock firmware for Mi Pad 4 (Clover) on the web, and I found it, so I flashed the stock firmware boot.img, fastboot flash boot boot.img, but when I rebooted, the device was stuck in the loading screen with three dots loading over a "Powered by Android" logo. I waited 20 minutes, nothing, it looks stuck, so this stock boot.img doesn't seem to work.
I can actually flash TWRP and that stock boot image both whenever I want and switch between them; the first works, the latter doesn't.
So, in poor words: I flashed twrp.img as boot.img and now I can't boot normally, but TWRP starts when turning on my device.
But I just want to get my default boot.img or system, or any other way to reaccess to my device. That's fine even if I have to hard reset or wipe everything, it's fine even if I am going to lose data, but please, just help me.
Can someone help me? I'm just a newbie in this world, please help me unbricking my device.
Thanks in advance.
Try installing twrp again and boot to it
Download custom rom.of your choice ( im using hovac and it been great for a year now )
Move it to your mipad via comouter
Format everything in twrp and install the rom and gapps
--- I just remembered havin same issue u having and if im not mistaking : u should reboot to recovery right after installing twrp ( you dont reboot to system )
Im not really sure about it cause it happened long time ago
@DanielVipx
Sorry, seems you tried that already. Did you try the mi flash tool?
This might help:
https://osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/
need some help i have curtana model. I successfully unlocked the bootloader then i went to flash the eu rom but it failed in twrp. i tried to reboot the phone but I got the system is destroyed screen. I still have access to fastboot but no recovery nor the os also. I tried to flash the stock rom with the flash tool but I've never had a success flashing a rom. the tool stays in flashing mode without a fail or success state. i left it all night and nothing happened. when in fastboot I'm still able to run fastboot commands but i cant flash manually any kind of recovery i still get the system destroyed screen.
do I still have hope to boot this device or not