Look what i found in my Note 10 today
Video attached
https://drive.google.com/open?id=1LMInRWHhcKZNrwK3PoeCZHEFCa7slsu_
Hansoliv said:
Look what i found in my Note 10 today
Video attached
https://drive.google.com/open?id=1LMInRWHhcKZNrwK3PoeCZHEFCa7slsu_
Click to expand...
Click to collapse
is this even possible?
abdou1998 said:
is this even possible?
Click to expand...
Click to collapse
I dunno.
I don't know how to test the refresh rate of the phone screen.
But the option is in the SW
Hansoliv said:
I dunno.
I don't know how to test the refresh rate of the phone screen.
But the option is in the SW
Click to expand...
Click to collapse
I found a way to acheive this settings (because it's not on my settings and I'm already on OneUI 2.1) is by installing an application called Activity Launcher and search for Motion smoothness, I activated 120Hz and I can confirm it's not working.
abdou1998 said:
I found a way to acheive this settings (because it's not on my settings and I'm already on OneUI 2.1) is by installing an application called Activity Launcher and search for Motion smoothness, I activated 120Hz and I can confirm it's not working.
Click to expand...
Click to collapse
oh crap .
well, it was worth the shot
Thank you.
abdou1998 said:
I found a way to acheive this settings (because it's not on my settings and I'm already on OneUI 2.1) is by installing an application called Activity Launcher and search for Motion smoothness, I activated 120Hz and I can confirm it's not working.
Click to expand...
Click to collapse
Thx, work for me and the difference is visible!!! Now I have 120hz enabled and scrolling is really fast!!
I thought it was an hardware limitation not software so I think its placebo your noticing unfortunately
I have enabled it for a laugh and I've felt it might be faster but I also think/know it is placebo. Just like the fingerprint scanner app not being optimised somehow being faster. It is a hardware limitation as said already. But experimenting is fun and should never stop
ONEUI 2.1? Is that snappdragon firmware?
After testing at https://www.testufo.com it's 60hz so placebo effect
The phone feels faster and more responsive. The update was huge and took about 10-15 minutes. It refreshed a lot of settings.
Make tests recording screen in slowmotion.
Wysłane z mojego SM-N975F przy użyciu Tapatalka
Related
Official Build: http://www.flyme.cn/firmwarelist-20.html
Note:
Based on 5.0.2
Installation takes long time.
For me (in CWM Recovery), ROM flashing took about 9 minutes and than the 1st boot took 8 minutes so be patient.
Do no flash GApps without 1st boot, it will give FC if you do so.
For root you have to flash SuperSU zip on your own.
Includes Normal (or named as powersave) and Performance mode sticking max frequency at 1.9 GHz and 2.3 GHz respectively.
Doesn't change Wi-Fi MAC address like other custom ROMs, if that matters.
Doesn't have dedicated WCDMA only mode, and resets automatically to preferred if you set in testing after reboot as in general ROMs
How battery life , performance?
any bugs?
please give us review.
patelumangv said:
How battery life , performance?
any bugs?
please give us review.
Click to expand...
Click to collapse
Well battery life seems fine. I can't comment on battery life of any ROM, I can't notice difference in battery life matter at all.
Performance seems OK, not very snappy but is good.
But I believe I will flash some other ROM now as only this ROM is one which is giving problem with playing Vainglory. Touching the screen scrolls down notification little bit most times in the app (not anywhere else but the specific game I olay)
ROM is fine not very highly intuitive or something just normal. Has inbuilt different immersed bar. And iOS like smart touch little white button.
Has themes available too.
Bugs idk didn't come across except I mentioned already.
ROM is usable for daily use, test yourself.
And do get rid of stock keyboard, it doesn't write letters despite getting tapped
patelumangv said:
How battery life , performance?
any bugs?
please give us review.
Click to expand...
Click to collapse
Battery life just sucks it drains damn fast then cm12 roms.
proximity sensor bug during incoming call.
Heating issue present on heavy usage.
the rom is still in beta stage
Anyone knows how disable hardware buttons backlight? I have Mi4.
ROM is very good do far in my opinion. Good performance, very nice camera (better than cm).
Wysłane z mojego MI 4W przy użyciu Tapatalka
Best battery life on this rom! MI4 LTE
Sent from my MI 4LTE using Tapatalk
This is for mi4 only..
Or can flash on mi3
dododol said:
This is for mi4 only..
Or can flash on mi3
Click to expand...
Click to collapse
It can be flash into mi3w
any idea how to synchronise contact from google account?
Install google installer for installing google apps
Sent from my MI 3W using Tapatalk
anyone have option control manual mode camera? I tried at my Mi3 when at manual mode only can change exposure + and - mode. no option change ISO etc. Front camera very clear/good compare MIUI camera.
And how to activate option/back button. I tried only can using menu button at mi Mi3
Hi..got problem when answer incoming call...
cant hear caller voice...
Or should change..any setting..
I was on miui v7 global developer
i tried installing from cwm
but stuck on mi logo
anyone know how much to wait???
Recently got an honor 8 FRD-L09 running droid 7 and emui 5 can't find a slo mo option in the camera anywhere.
I've turned off the wide aperture, tried all the resolution options, tried stabilizer on/off but still can't see any slo mo anywhere... what am I missing?
Try swiping from the left to see all of the available modes.
Swipe from left to right you will see it
Yes, the same in my honor 8.
Swiping left..i can't find this mode.
lakko said:
Yes, the same in my honor 8.
Swiping left..i can't find this mode.
Click to expand...
Click to collapse
Which version of firmware are you using?
Saeem said:
Which version of firmware are you using?
Click to expand...
Click to collapse
B389 FRD-L09
I think that a factory reset can be solve this, or new firmware update maybe.
lakko said:
B389 FRD-L09
I think that a factory reset can be solve this, or new firmware update maybe.
Click to expand...
Click to collapse
You are using the latest firmware I think. Did it happen after the update?
Saeem said:
You are using the latest firmware I think. Did it happen after the update?
Click to expand...
Click to collapse
Yes, with b389 (that add watermark and monochrome mode)
B386 here (updated August 3rd) - no slow-motion, gain monochrome mode
Maybe this is because of the update. Maybe it's removed from EMUI. (idk) @Rommco05 know anything about it?
I took 1st image from reddit, camera modes in marshmallow I guess. The second one is screenshot from my phone. I remember correctly that before the latest firmware update I saw slow-mo but no monochrome, now it's the other way around.
Slo-Mo is available up to 409 dpi. If you have set "Smallest width" in Developer settings to a larger number it will not show in the camera options
frisky_bg said:
Slo-Mo is available up to 409 dpi. If you have set "Smallest width" in Developer settings to a larger number it will not show in the camera options
Click to expand...
Click to collapse
Damn, I have 480.
Any idea of a 3rd part app to record slomo?
Inviato dal mio FRD-L09 utilizzando Tapatalk
frisky_bg said:
Slo-Mo is available up to 409 dpi. If you have set "Smallest width" in Developer settings to a larger number it will not show in the camera options
Click to expand...
Click to collapse
Mystery of missing slow motion is solved! Great work man!
pijes said:
Mystery of missing slow motion is solved! Great work man!
Click to expand...
Click to collapse
Not my finding. I just saw it in another thread and share it with you.
@frisky_bg
but what does the density of my screen have in common with my camera recording options ?? .. i dont get it.
where is the sense?
Beats the sh.t out of me.
Doesn't make any sense to me too, but it's a fact, unfortunately...
I've tried many roms with many camera apps but couldn't find one in which, portrait mode, hdr+ and slow motion(however slow motion isn't important for me at all) are working.
The best app that I found was the stock crdroid camera but neither does it have portrait mode plus it's hdr is very slow.
Can someone please provide me the best app that just works and has the features i mentioned above.
Hammad1029 said:
I've tried many roms with many camera apps but couldn't find one in which, portrait mode, hdr+ and slow motion(however slow motion isn't important for me at all) are working.
The best app that I found was the stock crdroid camera but neither does it have portrait mode plus it's hdr is very slow.
Can someone please provide me the best app that just works and has the features i mentioned above.
Click to expand...
Click to collapse
Google camera modded by urikill
MyNameIsRage said:
Google camera modded by urikill
Click to expand...
Click to collapse
I just tried it but the portrait mode is taking normal pictures
Sent from my Xiaomi Redmi Note 4 using XDA Labs
I tried the Urikill apk's specific for mido as well and it works as long as I didn't change anything in the settings. As soon as I do that both back and front camera just show a black screen (with controls still visible). A reboot doesn't help it neither does wiping the data ...
wimstefan said:
I tried the Urikill apk's specific for mido as well and it works as long as I didn't change anything in the settings. As soon as I do that both back and front camera just show a black screen (with controls still visible). A reboot doesn't help it neither does wiping the data ...
Click to expand...
Click to collapse
Same
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Hammad1029 said:
Same
Click to expand...
Click to collapse
I think that your experience with the gcam mods might be determined by the camera sensor on your phone. I have a Samsung sensor, and most of the mods work reasonably well (sometimes you have to tweak the settings). I have stayed with Arnova8G2 v6. It does FC sometimes, but it mostly good. The settings can be tweaked for improvements over default settings ("Auto"), but not all of them work well. If you choose very high resolution HDR settings, the shutter will be very slow - but the picture will be very good. I don't really use the portrait mode, so I can't comment on that. Before Arnova8G2, I used Cstark27 mods - and they were excellent too. But I think Arnova has the edge.
In any case, you can have a look at this repository of gcam mods.
DarthJabba9 said:
I think that your experience with the gcam mods might be determined by the camera sensor on your phone. I have a Samsung sensor, and most of the mods work reasonably well (sometimes you have to tweak the settings). I have stayed with Arnova8G2 v6. It does FC sometimes, but it mostly good. The settings can be tweaked for improvements over default settings ("Auto"), but not all of them work well. If you choose very high resolution HDR settings, the shutter will be very slow - but the picture will be very good. I don't really use the portrait mode, so I can't comment on that. Before Arnova8G2, I used Cstark27 mods - and they were excellent too. But I think Arnova has the edge.
In any case, you can have a look at this repository of gcam mods.
Click to expand...
Click to collapse
From.where do i check my camera sensor
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Hammad1029 said:
From.where do i check my camera sensor
Click to expand...
Click to collapse
I don't know of a straightforward way of getting that information. You will need to search the forum for that.
The method that I use is not straightforward. It depends on initd functionality, and this is not generally available in ROMs. Basically, I run dmesg from an initd script, and redirect the output to a file. I then parse the file and look for any of these;
1. "ofilm_s5k3l8" (sensor=Samsung)
2. "ofilm_imx258" (sensor=Sony)
3. "qtech_ov13855" (sensor=Omnivision)
You can of course run dmesg at any time from a root terminal. However, you need to capture the output early enough (i.e., during the bootup process) or the values you are looking for would be long gone.
PS: I don't know much about Kernel Adiutor - but it may be that it can help you to run the command to capture the necessary information, even without initd functionality. Maybe someone else can speak to that.
MyNameIsRage said:
Google camera modded by urikill
Click to expand...
Click to collapse
wimstefan said:
I tried the Urikill apk's specific for mido as well and it works as long as I didn't change anything in the settings. As soon as I do that both back and front camera just show a black screen (with controls still visible). A reboot doesn't help it neither does wiping the data ...
Click to expand...
Click to collapse
DarthJabba9 said:
I don't know of a straightforward way of getting that information. You will need to search the forum for that.
The method that I use is not straightforward. It depends on initd functionality, and this is not generally available in ROMs. Basically, I run dmesg from an initd script, and redirect the output to a file. I then parse the file and look for any of these;
1. "ofilm_s5k3l8" (sensor=Samsung)
2. "ofilm_imx258" (sensor=Sony)
3. "qtech_ov13855" (sensor=Omnivision)
You can of course run dmesg at any time from a root terminal. However, you need to capture the output early enough (i.e., during the bootup process) or the values you are looking for would be long gone.
PS: I don't know much about Kernel Adiutor - but it may be that it can help you to run the command to capture the necessary information, even without initd functionality. Maybe someone else can speak to that.
Click to expand...
Click to collapse
I'm on arnova v6 now and it's perfect. The only problem is that the front camera is mirroring/reversing the pictures I take which is incredibly annoying. Do you guys know of a system-wide or app limited tweak that can disable this? Or perhaps an alternative to this gcam which has that feature but also.has portrait mode and HDR+ working.
Sent from my Redmi Note 4 using XDA Labs
Hammad1029 said:
I'm on arnova v6 now and it's perfect. The only problem is that the front camera is mirroring/reversing the pictures I take...
Click to expand...
Click to collapse
I am not sure what you mean by this. The selfies I take look the same, regardless of the camera appthat I am using (OnePlus5, miui, Arnova).
DarthJabba9 said:
I am not sure what you mean by this. The selfies I take look the same, regardless of the camera appthat I am using (OnePlus5, miui, Arnova).
Click to expand...
Click to collapse
In these apps when you take a picture from the front camera, it is saved as mirrored as compared to the camera preview screen when you're positioning tot take the picture (for e.g a face looking at the left comes as right or vice versa). There is an option in the miui camera settings to disable this and also on most other camera apps. I want to disable this here too.
Sent from my Redmi Note 4 using XDA Labs
Hammad1029 said:
In these apps when you take a picture from the front camera, it is saved as mirrored as compared to the camera preview screen when you're positioning tot take the picture (for e.g a face looking at the left comes as right or vice versa). There is an option in the miui camera settings to disable this and also on most other camera apps. I want to disable this here too.
Click to expand...
Click to collapse
There is no option in any of my camera apps to change this behaviour.
DarthJabba9 said:
There is no option in any of my camera apps to change this behaviour.
Click to expand...
Click to collapse
There was one in the stock miui app and also in the crdroid stock camera app. Well, anyways I'm just gonna try all of the gcam versions. I'll let you all know in this thread when I find it in case you also want it
Sent from my Redmi Note 4 using XDA Labs
Hammad1029 said:
There was one in the stock miui app and also in the crdroid stock camera app. Well, anyways I'm just gonna try all of the gcam versions. I'll let you all know in this thread when I find it in case you also want it
Click to expand...
Click to collapse
I would certainly be interested!
This is a simple but powerful mod to improve your User experience on your Poco F1/ any Aderno 630 device.
What this mod does?
*Removes CPU rendering Pathway.
*Gives priority to GPU rendering for better cleaner and faster animation and gaming experience.
*Improves touch.
And much more!
(Of course backup your system just in case)
Installation:
Simply flash the zip via twrp and reboot!
Download attachment below.
Enjoy powerful GPU rendering!
Anyone test it already? How is the different ?
Sent from my POCOPHONE F1 using XDA-Developers Legacy app
what did this mod actualy do? when i opened the cfg file it only contain this string :
0 1 adreno630
There a app called Walt ,but a test kit is required,the only way to test touch latency, anyone keen to try out ?
alldine345 said:
what did this mod actualy do? when i opened the cfg file it only contain this string :
0 1 adreno630
Click to expand...
Click to collapse
This removes the software gfx rendering pathway I.e configured in libGLES_android.so and makes use of gives priority to hardware gfx rendering i.e the GPU u have in some cases software rendering is faster than hardware rendering but since I personally prefer hardware rendering I made this mod so others can use it to to avoid hassle. Simply flash and notice faster better animation in UI and gaming.
Aimara said:
There a app called Walt ,but a test kit is required,the only way to test touch latency, anyone keen to try out ?
Click to expand...
Click to collapse
I don't see any point doing such experiment because you will not notice any latency issue on daily bases expect in high end FPS gaming... If your concerned about the rumours about our device latency I can assure you it'll be fixed with a firmware update idk why Xiaomi is lazy to provide us the fix already!
$hivaM Manav said:
I don't see any point doing such experiment because you will not notice any latency issue on daily bases expect in high end FPS gaming... If your concerned about the rumours about our device latency I can assure you it'll be fixed with a firmware update idk why Xiaomi is lazy to provide us the fix already!
Click to expand...
Click to collapse
Well not for me , for those that keep complaining , i am quite ok with the touch ,be it typing messages on gboard or pubg
$hivaM Manav said:
This removes the software gfx rendering pathway I.e configured in libGLES_android.so and makes use of gives priority to hardware gfx rendering i.e the GPU u have in some cases software rendering is faster than hardware rendering but since I personally prefer hardware rendering I made this mod so others can use it to to avoid hassle. Simply flash and notice faster better animation in UI and gaming.
Click to expand...
Click to collapse
so how do we uninstall once we flashed it?
Even the magisk manager has a downloadable module called GPU turbo boost.. but nothing is happening.. it seems as if it has placebo effect.. just a waste of space.. so your app works differently??? Im currently having issues playing nba 2k18 after some time..
I simply wanted to play it smoothly... With gl tools.. iT says.. 30-50fps.. but never stable..
Having a touch issue and multitouch problem
Somebody says that it's a GPU program fault so that I got multitouch problem in pubg and other fps games.
So does this mod improve my touch issues completely?
mjbad6126 said:
Somebody says that it's a GPU program fault so that I got multitouch problem in pubg and other fps games.
So does this mod improve my touch issues completely?
Click to expand...
Click to collapse
No we will need to wait for a good custom kernel
What effect does this have on the battery. Will my battery drain faster?
That mod is amazing. Everything is so smooth now, unbelievable +.+
Flashed it.... Lets see what happens
Anyone can tell if the keyboard lag typing problem is solved by using this mod?
Nothing happens on mine . I really want my touch screen issue to be fixed . Thanks anyway ts keep on sharing
drakko00 said:
Nothing happens on mine . I really want my touch screen issue to be fixed . Thanks anyway ts keep on sharing
Click to expand...
Click to collapse
Touch screen issues have been fixed in the latest beta rom. Miui 10 8.10.25.
I still have it on xiaomi.eu latest build . Ill give it a try , im desperate now lol
$hivaM Manav said:
This is a simple but powerful mod to improve your User experience on your Poco F1/ any Aderno 630 device.
What this mod does?
*Removes CPU rendering Pathway.
*Gives priority to GPU rendering for better cleaner and faster animation and gaming experience.
*Improves touch.
And much more!
(Of course backup your system just in case)
Installation:
Simply flash the zip via twrp and reboot!
Download attachment below.
Enjoy powerful GPU rendering!
Click to expand...
Click to collapse
Does it works with asus zenfone 5z ???
I flashed it and Google play store and chrome keeps force closing
How do I uninstall?
Hi Guys...
I just read on Xperiablog that a new firmware is released (55.0.A.2.314), i have personally not got it yet (I am in The Netherlands), If anyone of you have got it already i am curious is there any improvement other than the security patch??
Looking forward to any feedback.
Source : https://www.xperiablog.net/2019/07/09/xperia-1-gets-july-2019-security-patches-55-0-a-2-314/
not yet
Good. Its getting boring
I found who got the first A2.314 July security patch
Russia and Ukraine. You can download new update via XperiFirm.
And yes it's only available on 9110 for now.
update:
-Smoother UI
-Fingerprint registration/recognition got better (much much better)
How about camera ??
blegs said:
How about camera ??
Click to expand...
Click to collapse
im on a process of setting up. about to check it out
---------- Post added at 12:04 PM ---------- Previous post was at 11:45 AM ----------
blegs said:
How about camera ??
Click to expand...
Click to collapse
Yes camera much better. Picture processing faster. Video Full HD 60FPS finally working without skipping frames.
What about quality of image ? Any improvement
avetny said:
Good. Its getting boring
update:
-Smoother UI
-Fingerprint registration/recognition got better (much much better)
Click to expand...
Click to collapse
Wow, seems like a great update. Looking forward to the better FP recognition.
How do you get the Firmware to my Xperia 1?
avetny said:
Good. Its getting boring
I found who got the first A2.314 July security patch
Russia and Ukraine. You can download new update via XperiFirm
And yes it's only available on 9110 for now.
update:
-Smoother UI
-Fingerprint registration/recognition got better (much much better)
Click to expand...
Click to collapse
Afrojacked said:
How do you get the Firmware to my Xperia 1?
Click to expand...
Click to collapse
Download the firmware using xperifirm, then use newflasher to flash it.
Or just wait for your region to get the latest version.
iArvee said:
Wow, seems like a great update. Looking forward to the better FP recognition.
Click to expand...
Click to collapse
Lmao they tweaked sound vol higher, now my ear speaker is cracking while playing music ?
1. Is there 21:9 ratio for pictures?
2. Is there a fix for 4k video stabilization?
3. Is there 4k 60fps mode?
4. How is battery life?
5. Can we add more home pages to the left and select main screen(home)?
6. Did wifi connection improve?
7. Is the vivid mode for screen back?
8. Is the performance mode for STAMINA back?
9. Is disturbing sound when listening to music via bluetooth headset gone? I mean there is one since it is changing quality or caused by "headphones" app.
10. Are there more color options for main theme / wallpaper?
decomposed said:
1. Is there 21:9 ratio for pictures?
2. Is there a fix for 4k video stabilization?
3. Is there 4k 60fps mode?
4. How is battery life?
5. Can we add more home pages to the left and select main screen(home)?
6. Did wifi connection improve?
7. Is the vivid mode for screen back?
8. Is the performance mode for STAMINA back?
9. Is disturbing sound when listening to music via bluetooth headset gone? I mean there is one since it is changing quality or caused by "headphones" app.
10. Are there more color options for main theme / wallpaper?
Click to expand...
Click to collapse
1- NO
2- NO
3- Still the same
4- NO
5- NO
6- NO
7- NO
8- NO
9- NO
10 - NO
Just security patch and stability / performance improvement.
Improvement in camera quality ?
blegs said:
Improvement in camera quality ?
Click to expand...
Click to collapse
Can't really comment on the picture quality as I've had mixed results since day 1. It's usually hit an miss.... But the slow album and loading of captured images is till here. The delay between switching lenses is still there. I guess we need to wait for the next firmware update....
Xeon said:
Can't really comment on the picture quality as I've had mixed results since day 1. It's usually hit an miss.... But the slow album and loading of captured images is till here. The delay between switching lenses is still there. I guess we need to wait for the next firmware update....
Click to expand...
Click to collapse
Slow album loading? Never had that issue for me. If your pictures are saved to the microsd card, make sure your microsd card isn't slow.
Finally Got the Update in Netherlands
I finally got the update this morning (Region R9A). My impression is the overall performance has definitely increased, it mush much more responsive. Fingerprint gets it right every single attempt, before this i kinda had given up on the FPR, and was using the pin every time.
After taking a picture it does process a tad bit faster and album do load ever so slightly faster.
Other than this i haven't really noticed any difference in camera quality or any new added feature. Maybe once they launch in US, more features maybe added (Finger crossed), also with the added number of users across the pond, we may finally have some developer who would be able to port GCAM to this phone.
iArvee said:
Slow album loading? Never had that issue for me. If your pictures are saved to the microsd card, make sure your microsd card isn't slow.
Click to expand...
Click to collapse
I have over 50k pictures mostly whatsapp so it's kinda slow loading however on my XZ premium i never had issues.
Any new change ?
Good to know I wasn't the only one struggling with fingerprint sensor. Half the time it says 'Not recognized' or 'partial fingerprint detected'.
blegs said:
Any new change ?
Click to expand...
Click to collapse
Yes