Here's what the ODIN log says:
Code:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1301)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 3553 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> dt.img
<ID:0/008> dtbo.img
<ID:0/008> system.img
<ID:0/008> vendor.img
<ID:0/008> carrier.img
<ID:0/008> vbmeta.img
<ID:0/008> userdata.img
<ID:0/008> FAIL!
Meanwhile, on my phone, it says
Code:
SECURE CHECK FAIL : (VBMETA)
What the hell is going on??
Other information that may be helpful:
I haven't OEM unlocked it -- there's literally no option in developer settings, even after following every single tutorial under the sun to get it to a T.
Any help would be much appreciated.
The_Tablet said:
Here's what the ODIN log says:
Code:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1301)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 3553 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> dt.img
<ID:0/008> dtbo.img
<ID:0/008> system.img
<ID:0/008> vendor.img
<ID:0/008> carrier.img
<ID:0/008> vbmeta.img
<ID:0/008> userdata.img
<ID:0/008> FAIL!
Meanwhile, on my phone, it says
Code:
SECURE CHECK FAIL : (VBMETA)
What the hell is going on??
i think the vbmeta that is included inside the firmware is not samsung official......are you trying to flash a custom rom?
And yes its cause of the bootloader being locked thats why you cant flash an unofficial binary
Click to expand...
Click to collapse
Related
Hi,
I am trying to install a custom ROM on my phone. I have the i9300 version and I am following this guide:
http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744
I am using the version attached, even though it looks a little old. I have done nothing to the phone before this so it is a stock OS.
I have booted in to download mode and flashed using odin, Odin says everything went ok and does a restart:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/009> Added!!
After this I try to boot in to recovery mode and it is not the version I see on the video and there is no touch. The Rom I choose will then not install correctly. I guess that its not the clockwork mod, any idea on what I am doing wrong?
Thanks
-Howard
In the end of the guide there is:
"Stock Recovery being reflashed after a reboot?..."
May be You have stock recovery after reboot?
And have You tried Samsung toolkit? http://forum.xda-developers.com/galaxy-s3/orig-development/samsung-galaxy-s3-unified-toolkit-v8-0-t1703488
Hi,
Just tried that, same issue. It's like it can't get root. No errors thrown and odin seems happy and reports it's "passed"
currently my device is soft bicked when i flash a rom it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
when i flash a kernel or a rom with the pit it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
plz help
sabirchowdhury said:
currently my device is soft bicked when i flash a rom it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
when i flash a kernel or a rom with the pit it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
plz help
Click to expand...
Click to collapse
make sure keis is installed
reply
Thanks for replying but..
kies is/was already installed ( and thats what it showed)
sabirchowdhury said:
Thanks for replying but..
kies is/was already installed ( and thats what it showed)
Click to expand...
Click to collapse
You need to be more precise:
1. What's your device (If I remember correctly, it is a 4.0 I won't advance further to give false information)
2. What rom are you trying to flash
Upon receiving those informations, we can better help you.
1 . my device - yp-gi1cw ( international version ) / samsung galaxy player/wifi 4.2
2 . my rom - The rooted ROM of this thread http://forum.xda-developers.com/showthread.php?t=1884071
Ive flashed a kernel sucsess but now the rom
still the same problem
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
ive just fixd it the broblem was my usb kept disconnetcting
i found out because it stopped at different places i fixed it by holding it in with force and staying in that position for 10 mins thanks for the help
Hey im trying to boot a custom recovery using Odin 3.09.
I've tried flashing twrp-2.8.6.1-i9300.tar and recovery-cwmtouch-6.0.3.2-GTI9300
but when I try to boot recovery I get the dead android screen. Everything seemed to go ok
No idea?
Please give us a hand
thanks
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
1. There are newer tar's here, but that won't help.
2. Are you able to boot into Downloadmode or System /ROM?
Hi
I have a GT-i9205 which I used to have rooted with megakat (I think) which I gave to a friend, I was given it back in a bootloop state & i would like to try and fix it if possible. Can someone help with the information below?
Boot = Set Warrenty Bit: Kernal & forced reboots
Recovery= Recovery booting Set Warrenty Bit: Recovery & forced reboots
Download Mode: I can enter it & flash but nothing takes effect, I flash CWM recovery or philz_touch_6.48.4-meliusltexx & the process shows pass in odin without errors but i cannot boot into recovery's/stock rom (I9205XXUDOA1)
When device is connected windows recognises it in download mode & is showing in device manager under USB controllers as Samsung mobile USB CDC composite device.
I also tried to flash PIT for i9205 aswell with I9205XXUDOA1 in PDA
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Hi friends
My phone dropped from hand and got black screen now Iam trying to flash samsung s5 using odin.. and getting error message.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1205)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thanks
ufoall said:
Hi friends
My phone dropped from hand and got black screen now Iam trying to flash samsung s5 using odin.. and getting error message.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1205)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thanks
Click to expand...
Click to collapse
What's your intention? Do you have a custom rom and want to flash stock rom to get the device to repair center?