Hi everyone! I have built a dtbo.img with kernel sources from @Inkypen. With this image you should have 78hz screen refresh rate with a slightly green tint.
Requirements
- TWRP
- Mostly any custom rom, doesn't work on MIUI.
Tested ROMs
Android 11:
Pixel Experience 11 - 66hz
LineageOS 18.1 - 66hz
Havoc 4.1 - 66hz
Android 10:
Pixel Experience Plus 10 - 08/05/2020 - 78hz
Havoc 08/05/2020 78hz
Paradroid 08/05/2020 78hz
LineageOS 08/05/2020 78hz
EvolutionX -78hz (april update)
Usage
- Download dtbo78.img or dtbo66.img
- Reboot to TWRP
- Select Backup>dtbo (just for safety in case something goes wrong or your rom is not yet supported)
- Select Install>Select Image, select dtbo78.img and check "dtbo"
- Reboot
You can also flash it using "fastboot flash dtbo dtbo78.img" in fastboot mode connected to a computer.
WARNING! Use 78hz ONLY for May 2020 builds or older (not june builds, as they are based on a new kernel) for 78HZ.
Use 66hz ONLY for Android 11 builds.
This is based on Unofficial Pixel Experience 10 Build date 08.05.2020 (maintainer @Inkypen). It works fine, testufo shows 77-78hz, not perfectly syincing. I personally daily drive it.
Android 11 mod (66hz) doesn't have a green tint.
Download
Hi, could you post the stock dtbo file At the Pixel Experience friezes are observed
draand28 said:
Hi everyone! I have built a dtbo.img with kernel sources from andromeda-p-oss (android P). With this image you should have 69hz screen refresh rate without green tint.
Requirements
- TWRP
- Mostly any custom rom, maybe even MIUI 10, but not 11 beta because it uses a different kernel.
Tested ROMs
Pixel Experience Plus 10 - 25/03/2020
EvolutionX
Usage
- Download dtbo69.img
- Reboot to TWRP
- Select Backup>dtbo (just for safety in case something goes wrong or your rom is not yet supported)
- Select Install>Select Image, select dtbo69.img and check "dtbo"
- Reboot
You can also flash it using "fastboot flash dtbo dtbo69.img" in fastboot mode connected to a computer.
Download
Click to expand...
Click to collapse
You can upload a stock dtbo file?
Please
I have added it on the original post.
this might be out of topic
are those rom u use got any issue aside 5g ?
I'll be trying this mod on my Mi Mix 3 5G. First I need to unlock the bootloader and afterwards I'll install Pixel Experience. Thank you so much for your hard work!
Edit: Just tested it with Pixel Experiende Plus (13-04-2020) and it's working perfectly fine in 75Hz, thank you again!
ZeistX said:
this might be out of topic
are those rom u use got any issue aside 5g ?
Click to expand...
Click to collapse
5G is working great on custom roms (tested on Pixel experience). The phone will not show 5G option in settings or 5G icon in notification bar, but the carrier aggregation between 4G and 5G cell does happen, thus the overall speed is increased by the 5G cell. I would advice you to use the latest modem on your device available here: https://forum.xda-developers.com/mi-mix-3/xiaomi-mi-mix-3-5g-andromeda/mod-updated-modem-partition-twrp-backup-t4085329
draand28 said:
5G is working great on custom roms (tested on Pixel experience). The phone will not show 5G option in settings or 5G icon in notification bar, but the carrier aggregation between 4G and 5G cell does happen, thus the overall speed is increased by the 5G cell. I would advice you to use the latest modem on your device available here: https://forum.xda-developers.com/mi-mix-3/xiaomi-mi-mix-3-5g-andromeda/mod-updated-modem-partition-twrp-backup-t4085329
Click to expand...
Click to collapse
uwu okay thanks will try later also i have tried your mod on stock miui global 10.3.20 , its booting but the is touch not working .
will try on custom rom later
Hi!
Does this mod also work for non 5G version?
No, this mod is only for Andromeda or Mix 3 5G. For the Persues please refer to its forum, thanks!
FACCO-00 said:
Hi!
Does this mod also work for non 5G version?
Click to expand...
Click to collapse
Wrong forum mate, thread comes from 5g forums.
It's not working on miui eu rom.
draand28 said:
5G is working great on custom roms (tested on Pixel experience). The phone will not show 5G option in settings or 5G icon in notification bar, but the carrier aggregation between 4G and 5G cell does happen, thus the overall speed is increased by the 5G cell. I would advice you to use the latest modem on your device available here: https://forum.xda-developers.com/mi...-updated-modem-partition-twrp-backup-t4085329
Click to expand...
Click to collapse
Hi, may I ask which version of Pixel Experience you are using on your Mix 3 5G? I tried to flash one version yesterday and my phone got stuck on the Google icon screen when you first reboot the phone.
Thanks
That is because you didn't format data before flashing. Pay attention, *format data*, not wiping. When you format data you will be requested to type letter by letter *yes*.
draand28 said:
That is because you didn't format data before flashing. Pay attention, *format data*, not wiping. When you format data you will be requested to type letter by letter *yes*.
Click to expand...
Click to collapse
Thank you, I now have it working.
Is video recording working on the latest pixel experience build for you?
I have tried in gcam and in social media apps and video recording is not functioning at all.
Thanks
No, it is not.
benjaminbryce said:
Thank you, I now have it working.
Is video recording working on the latest pixel experience build for you?
I have tried in gcam and in social media apps and video recording is not functioning at all.
Thanks
Click to expand...
Click to collapse
Everything was working fine for me in this pie Pixel Experience rom, Android 10 has issues with the camera and VOIP calls that have yet to be fixed.
https://sourceforge.net/projects/xi...eda-9.0-20200227-1511-UNOFFICIAL.zip/download
Edit: I am running the 78Hz mod on the Pixel Experience rom I linked and it's working really nice!
Hi, can you make It works for the miui 11 beta???i installed the pixel experience rom but the camera doesn't work fine!!
Enviado desde mi Mi MIX 3 5G mediante Tapatalk
Just Reyes on latest pixel ROM with magisk not working screen is lagging a bit and reboots. Any chance this can be updated with Android 10 ?
---------- Post added at 04:31 PM ---------- Previous post was at 04:31 PM ----------
Tried*
Pixel Rom 10.0-20200917 - 78hZmode doesent work, 66hZ works fine
draand28 said:
Hi everyone! I have built a dtbo.img with kernel sources from @Inkypen. With this image you should have 78hz screen refresh rate with a slightly green tint.
Requirements
- TWRP
- Mostly any custom rom, doesn't work on MIUI.
Tested ROMs
Android 11:
Pixel Experience 11 - 66hz
LineageOS 18.1 - 66hz
Havoc 4.1 - 66hz
Android 10:
Pixel Experience Plus 10 - 08/05/2020 - 78hz
Havoc 08/05/2020 78hz
Paradroid 08/05/2020 78hz
LineageOS 08/05/2020 78hz
EvolutionX -78hz (april update)
Usage
- Download dtbo78.img or dtbo66.img
- Reboot to TWRP
- Select Backup>dtbo (just for safety in case something goes wrong or your rom is not yet supported)
- Select Install>Select Image, select dtbo78.img and check "dtbo"
- Reboot
You can also flash it using "fastboot flash dtbo dtbo78.img" in fastboot mode connected to a computer.
WARNING! Use 78hz ONLY for May 2020 builds or older (not june builds, as they are based on a new kernel) for 78HZ.
Use 66hz ONLY for Android 11 builds.
This is based on Unofficial Pixel Experience 10 Build date 08.05.2020 (maintainer @Inkypen). It works fine, testufo shows 77-78hz, not perfectly syincing. I personally daily drive it.
Android 11 mod (66hz) doesn't have a green tint.
Download
Click to expand...
Click to collapse
Wow bootloop custom ROM fluid 1.4 android 11
Related
Hey guyz, I am opening this thread to discuss latest Los 16 by Nichcream for Redmi 3s/ Redmi 3s prime/ Redmi 3X ( Device code LAND) . I found this build very stable. No bug encountered yet.
Los ROMs are for those who does not want many customizations and love to stock android ROM experience and Los is purest form of it.
As Nich builds are super stable and surprisingly I found this Los build is super smooth, no heating problem and Finger print recognition is super fast.
Full credit to Nichcream sir, I am just discussing on his build.
For Indian users Volte, Vilte both working but no Volte logo in status bar.
No much customization except network traffic and button customization as you know Los is not known for customization but you will certainty like it for stability , smoothness and performance.:laugh:
Gcam and all other stuff working super fine.
:good:
In the case you didn't found the link for download it is below here :
https://androidfilehost.com/?w=profile&uid=673368273298950901
Here are some screenshots of 26 June build
Again it is to remind you that it is non treble and unofficial build and it seems that we are very close to Los 16 official and we hope for Nichcream will be maintainer for it.
I will post battery backup graph after some time .
Enjoy Los 16 Full credit to Nichcream.
New build is up:
⚡️ LINEAGE 16.0 | PIE | 4.9 KERNEL ⚡️
➡ Lineage os rom update available for Redmi 3S (land) (non treble)
? by Nichcream
ℹ Version : 16.0 (Pie)
? Build date : 2019/07/27
⚙ Changelog :-
• Enable Qualcomm's NLP combo feature
• Lineage upstream (Merge pie-gsi, Improve performance of unclipped save layers, etc.)
• Kernel: Merge ASB-2019-06-05
• Update GPS, BT and RIL blobs
#los #pie #beta #non-treble #nichcream
@r3spX™ | OFFICIAL GROUP @r3spX_UPDATES™ | UPDATE CHANNEL @r3spX_SCREENSHOTS™ | GALLERY
Los 16 build with April 2019 security patch is up. Here is the download link. Build date 13..04.2019
https://androidfilehost.com/?fid=1395089523397942624
You should post his profile on androidfilehost and not directly the download link.
mannequiin said:
You should post his profile on androidfilehost and not directly the download link.
Click to expand...
Click to collapse
Thnx corrected
Great idea to open this thread. I was searching around myself on nichcreams filehost profile and wanted to try this new rom as well. I checked nichcreams github and he keeps updating the land and kernel source code, his work looks very valueable.
After almost 2 years of owning a Redmi 3s, I think we have finally reached a point of great quality. AOSP/GZOSP/LOS base + nichcream land sources + Difr kernel sources is the ultimate combination to use at this moment in my opinion.
Big thanks to @nichcream
Nice rom just installed.:good:
Will give you review after use of some time.
No bug found till now.
Really good ROM.
Thanks to nicecream battery backup and performance is very good. No any single bug. Pure stock rom.
Bb
Is it intended behavior that data transfer is only available in LTE? In 2G/3G web browser claims "net error no internet connection"
Edit: problem related to my carrier provider, not rom problem.
BTW cannot send/receive MMS. Anyone can confirm MMS working in this ROM?
I've been using this ROM for the last two days and the smoothness of it is amazing. No lags, no slowdowns, everything working as expected. Battery backup seems normal, although I'd need to review it in a few days.
I hope this becomes official.
epraes said:
I've been using this ROM for the last two days and the smoothness of it is amazing. No lags, no slowdowns, everything working as expected. Battery backup seems normal, although I'd need to review it in a few days.
I hope this becomes official.
Click to expand...
Click to collapse
I guess, for this rom becoming official it has to be treble first and fulfills all of the lineageos's rules to be a official rom!
I don't see what Treble has to do with it becoming official or not. But it's true that the rules are very strict and difficult to comply with. In any case there's no guarantee the developer even wants to apply for the official tag anyway.
As long as it's maintained and updated, it's going to be my ROM of choice.
Hows battery? Compared to AEX
arteks said:
Is it intended behavior that data transfer is only available in LTE? In 2G/3G web browser claims "net error no internet connection"
Edit: problem related to my carrier provider, not rom problem.
BTW cannot send/receive MMS. Anyone can confirm MMS working in this ROM?
Click to expand...
Click to collapse
MMS doesn´t work on this build. Although @Manzing managed to get MMS running on ritesh´s sources (official RR, Nitrogen, CrDroid official) I never got it running on any Oreo rom; even if I use exactly the same apn´s like I do in Nougat where it´s working. So until now, there´s no fully working MMS for Oreo!
Trovies said:
Hows battery? Compared to AEX
Click to expand...
Click to collapse
I'd say similar, but I'm using a custom kernel so I can't be sure.
How is in game like PUBG?"
Bug founded:
Recent call mix as if someone calls you on your no then call log it appears his mobile no + your mobile no.
Hope will be resolved in next update:good:
New version released: lineage-15.1-20180704-UNOFFICIAL-land
Downloading now, praise lord Nichcream!
rkjha said:
Bug founded:
Recent call mix as if someone calls you on your no then call log it appears his mobile no + your mobile no.
Hope will be resolved in next update:good:
Click to expand...
Click to collapse
Yes i was about to write this bug
As i came to know this yesterday!!
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about resources included in this thread
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
This is a thread for any talk about our custom ROMs/Kernels/mods or whatever. Feel free to talk about anything related to our device, be it concerns, questions, or anything else.
Communication:
Development group: https://t.me/motog5schat
Development channel: https://t.me/motog5s
List of discontinued custom ROMs/Kernels:
Pie:
ArrowOS 9.x
Dot OS 3.x
AOSIP 9.0
Dot OS 3.x
Oreo:
All except for LineageOS 15.1
Reviver Kernel
Nougat:
All except for LineageOS 14.1
Remove Bootloader unlock warning:
https://forum.xda-developers.com/moto-g5s/themes/boot-logo-n-removed-moto-g5s-t3719890
Google Pixel boot logo:
https://forum.xda-developers.com/g5/themes/bootanimation-splash-pixel-2-t3701489
Some nice Motorola logos:
https://forum.xda-developers.com/g5/themes/motorola-boot-logo-n-removed-t3663735
Stock ROM
XT179x: https://mirrors.lolinet.com/firmware/moto/montana/official/
XT1799-2: https://mirrors.lolinet.com/firmware/moto/montana_retcn/official/RETCN/
Downgrade back to Nougat (7.1):
https://forum.xda-developers.com/moto-g5s/how-to/tutorialdowngrade8-1-07-1-1use-nougat-t3862780
Pixelify for Stock ROM:
https://forum.xda-developers.com/moto-g5s/themes/mod-stock-rom-t3899004
Google Camera ports:
Port for cedric (works on montana):
https://forum.xda-developers.com/g5/themes/perfect-gcam-5-1-moto-g5-cedric-t3890519
Port for montana:
https://forum.xda-developers.com/moto-g5s/themes/google-camera-port-hdr-arm64-t3889565
Port for Redmi 3S/4X (works on montana):
All of the above need an ARM64 ROM. The 5.1 port needs Oreo and higher while the 6.1 port needs Pie and higher.
Fingerprint on custom ROMs:
For custom ROMs based on Android Oreo (8.x) except LineageOS 15.1 - flash through Fastboot
For custom ROMs based on Android Pie (9.0) & LineageOS 15.1 - flash through TWRP
Guide by @zahidm
Recoveries:
JarlPenguin's (my) TWRP (Treble): https://forum.xda-developers.com/mo...covery-unofficial-twrp-recovery-moto-t3916370
Encryption works, IMEI backup is there
JarlPenguin's (my) SHRP (Treble): https://forum.xda-developers.com/moto-g5s/development/recovery-shrp-recovery-1-2-t3917863
Encryption works, IMEI backup is there
Unofficial Bug Tracker
Issue: Video recording not working on stock camera.
Workarounds:
1. Disable Camera2API (persist.camera.hal3.enabled=0 in build.prop)
2. Download Open Camera or Footej Camera from the Play Store.
Status: Fix is released.
Affected ROMs: All except LineageOS 15.1/16/16 Treble
Severity: High
Issue: Pick-up option in Ambient Display in Moto Actions causes Ambient Display to stop working except when new notifications arrive.
Workaround: Disable Pick-up and enable Hand Wave/
Status: Fix is released.
Severity: Medium
Affected ROMs: All except LineageOS 15.1/16 and Pixel Experience CAF
Issue: Frontal flash doesn't work.
Workaround: Use the ROMs with the fix included.
Status: Fix is released.
Severity: Medium
Affected ROMs: Some old ROMs
Please Also paste Fixes and links in front of each line if available.
I just tried AEX 9.0 and Pixel Exp. 9.0 and only major bug is Video recording that can be fixed via Footej or open camera,
And fingerprint gestures that is still under fixation.
If we deactivate Pick up in Ambient display than Hand wave Ambient display works
Much less bugs only in Pixel Experience Pie..
zahidm said:
Please Also paste Fixes and links in front of each line if available.
I just tried AEX 9.0 and Pixel Exp. 9.0 and only major bug is Video recording that can be fixed via Footej or open camera,
And fingerprint gestures that is still under fixation.
If we deactivate Pick up in Ambient display than Hand wave Ambient display works
Much less bugs only in Pixel Experience Pie..
Click to expand...
Click to collapse
I'll try pasting links.
Guys Follow this link and you can use Gcam in your pie ROMs with HDR and video recording.
https://forum.xda-developers.com/moto-g5s/themes/google-camera-port-hdr-arm64-t3889565
zahidm said:
Guys Follow this link and you can use Gcam in your pie ROMs with HDR and video recording.
https://forum.xda-developers.com/moto-g5s/themes/google-camera-port-hdr-arm64-t3889565
Click to expand...
Click to collapse
Video recording does not work with my device.
JarlPenguin said:
Video recording does not work with my device.
Click to expand...
Click to collapse
Try the method in link, above
1: Root your ROM
2: Install Es File explorer
3: Go to system/Build prop
4: edit file and in camera section add line
" persist.camera.HAL3.enabled=1"
Reboot phone and video recording will work.
zahidm said:
Try the method in link, above
1: Root your ROM
2: Install Es File explorer
3: Go to system/Build prop
4: edit file and in camera section add line
" persist.camera.HAL3.enabled=1"
Reboot phone and video recording will work.
Click to expand...
Click to collapse
I've obviously done that. GCam requires HAL3 to be enabled to work at all... AFAIK Video doesn't work at all for some apps in Pie.
Updated!
JarlPenguin said:
Updated!
Click to expand...
Click to collapse
Thanks Man...
zahidm said:
Thanks Man...
Click to expand...
Click to collapse
In which ROMs fast charging not working?
JarlPenguin said:
In which ROMs fast charging not working?
Click to expand...
Click to collapse
Pixel Experience is showing Rapid charging and all other ROMs showing slow charging with normal charger,.
and i have noted down time with normal charger Pixel Experience is charging very fast.
Boot leggers, Arrow os, AEX, CrDroid all showing slow charging. i still do not know the reason why only Pixel Experience is showing "Rapid Charging" :silly:
Edit: in My opinion Arrow OS and CrDroid are very good builds, but because of slow charging i went back to Pixel Experience.
I have Devices same model and in both same results, one device is for testing and one in my use.
I am unable to get that Fingerprint scanner when i install any Oreo custom ROM, but at Pie Custom ROMs it is working very well, Any clue that how to activate that.
I found a downgrade zip tp flash after ROM and whenever i flash my phone go to Bootloop, and than i back to Recover and i am unable to mount any Firmware,... Than i have to flash stock Oreo by Fastboot to get alive.
Than again flash TWRP and so on....
Anybody can Help here?
zahidm said:
I am unable to get that Fingerprint scanner when i install any Oreo custom ROM, but at Pie Custom ROMs it is working very well, Any clue that how to activate that.
I found a downgrade zip tp flash after ROM and whenever i flash my phone go to Bootloop, and than i back to Recover and i am unable to mount any Firmware,... Than i have to flash stock Oreo by Fastboot to get alive.
Than again flash TWRP and so on....
Anybody can Help here?
Click to expand...
Click to collapse
Oreo ROMs require Nougat fingerprint firmware. You should flash the firmware through Fastboot, not TWRP.
JarlPenguin said:
Oreo ROMs require Nougat fingerprint firmware. You should flash the firmware through Fastboot, not TWRP.
Click to expand...
Click to collapse
You mean i have to flash complete Nougat Stock ROM before flashing Oreo custom?
I do not Understand why people spread wrong fixes on Forums if there is only fix to switch from Stock Nougat to Custom Oreo and Stock Oreo to Custom Pie...
Dear All please do not consider any Fingerprint fix via TWRP, just follow the stock procedure.. Thank you @JarlPenguin
zahidm said:
You mean i have to flash complete Nougat Stock ROM before flashing Oreo custom?
I do not Understand why people spread wrong fixes on Forums if there is only fix to switch from Stock Nougat to Custom Oreo and Stock Oreo to Custom Pie...
Dear All please do not consider any Fingerprint fix via TWRP, just follow the stock procedure.. Thank you @JarlPenguin
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=11410932744536995181
Follow the instructions inside the ZIP. No need to flash Nougat stock again or else you will get a hard brick.
Updated guide!
JarlPenguin said:
https://androidfilehost.com/?fid=11410932744536995181
Follow the instructions inside the ZIP. No need to flash Nougat stock again or else you will get a hard brick.
Click to expand...
Click to collapse
I never updated Bootloader and Partition.gpt i skipped both commands while flashing Oreo, but let me check instructions shared by you. Thanks man..
Question:
I have to do this after flashing Custom Oreo?
And if i will flash Pie again Fingerprint will work?
@JarlPenguin I have tested and created a guide to fix the Fingerprint at Oreo and PIE Custom ROMs as there was no guide anywhere, to ease the people, thank you for the guide and files, you can add link in Post#1 if you want.
https://forum.xda-developers.com/mo...r-oreo-8-1-t3900508/post78913127#post78913127
zahidm said:
I never updated Bootloader and Partition.gpt i skipped both commands while flashing Oreo, but let me check instructions shared by you. Thanks man..
Question:
I have to do this after flashing Custom Oreo?
And if i will flash Pie again Fingerprint will work?
Click to expand...
Click to collapse
Yes, but you need to flash Oreo firmware to be able to have fp on Pie ROMs.
Updated guide again with link.
JarlPenguin said:
Yes, but you need to flash Oreo firmware to be able to have fp on Pie ROMs.
Updated guide again with link.
Click to expand...
Click to collapse
I have added Oreo stock files for PIE ROMs And tested these are working well, No need to flash Stock Oreo, just to use attached zip and flash via fastboot and it's working.
Hi, i am currently using pixels experience custom rom on my device but the current pre installed gcam doesn't had night scene, and sometimes its lagging.. Does anyone have a stable version for gcam selfie and night scene.
Thanks
Just get the last file, which works best for android 9.x pie variants. I'm running it on Syberia OS, and the only issues I have is selfie in portrait mode doesn't work.
https://miui.blog/redmi-5-plus/compatible-gcam-mods/
After a lot of testing following is working for me (using HavocOS without Gapps):
- flash attached camera_2api.zip (it's from the note 5 plus forum, but works for me)
- flash the attached camera (it's a Magisk module, so Magisk must be flashed too)
As always: making a backup is recommended. Hope I could help.
Greetings from Germany
Gaukler_Faun said:
After a lot of testing following is working for me (using HavocOS without Gapps):
- flash attached camera_2api.zip (it's from the note 5 plus forum, but works for me)
- flash the attached camera (it's a Magisk module, so Magisk must be flashed too)
As always: making a backup is recommended. Hope I could help.
Greetings from Germany
Click to expand...
Click to collapse
is this the miui camera or gcam? and also what version?
Liron123 said:
is this the miui camera or gcam? and also what version?
Click to expand...
Click to collapse
I think it's Mui Camera. But the package name is "com.android.camera". Version code is 2.0. I attached a screenshot.
I recommend using GCamera_Mod_v.5.1.23_R5Plus_fix_crash for Front Camera on any rom!
And I also recommend bsg-test-8.1 then disabling the location, shutter sound and enabling
the HDR+ Enhanced to prevent crashing then installing MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun
and configuring it properly If you did that without crashes (Which I have done many times!) then update
to MGC_6.1.021_BSG_Arnova-based_v.1.4a_TlnNeun and done now you have to configure It yourself properly
else It'll be pretty crappy!
If you're dumb and cant understand this then simply flash the MIUI Camera above my post
I recommend xtreme v2s config, and 7hdr frames for day 36 for night and fully working night sight
with good auto-focus in low-light and sharpness etc.
Hi all,
as the GSI topic here is still having a few issues, i have created a gsi overlay as per phhussons instructions:
https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay
The source code can be found here:
https://github.com/mKenfenheuer/vendor_hardware_overlay
Build/install instructions:
(Assuming you have a recent Ubuntu/Debian/Mint Linux machine running)
1. Install xmlstarlet and dos2unix
2. Go to build folder
3. Run bash build.sh
4. Copy treble-overlay-realme-x2pro.apk to /system/overlay in your gsi.
5. add the following property to /vendor/build.prop or replace with the attached build.prop
# Patch to add device specific match for treble overlays by mkenfenheuer
ro.vendor.build.overlay.deviceid=RMX1931
Works (confirmed by me):
- Always on display
- 90hz display
'Should' be working:
- Enables DT2W option but enabling does not seem to have any effect to me.
- VOLTE - i cannot test as my carrier does not offer this anymore
- more reliable network connection (i have noticed far less lte issues, but this is my perception)
MISC:
- Imported the settings from realme vendor (i don't know if they are nescessary)
If there are any issues, simply delete the file from /system/overlay with recovery file manager and reboot.
I've added the compiled apk to this post, in case you do not want to build it yourself.
mKenfenheuer said:
Hi all,
as the GSI topic here is still having a few issues, i have created a gsi overlay as per phhussons instructions:
https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay
The source code can be found here:
https://github.com/mKenfenheuer/vendor_hardware_overlay
Build/install instructions:
(Assuming you have a recent Ubuntu/Debian/Mint Linux machine running)
1. Install xmlstarlet and dos2unix
2. Go to build folder
3. Run bash build.sh
4. Copy treble-overlay-realme-x2pro.apk to /system/overlay in your gsi.
As i have currently not flashed any gsi, i would ask you guys to test please.
Preferably with phhussons AOSP 10 gsi.
If there are any issues, simply delete the file from /system/overlay with recovery file manager and reboot.
I've added the compiled apk to this post, in case you do not want to build it yourself.
Click to expand...
Click to collapse
I copy your .apk overlay to /system/overlay and reboot. I am on evolution gsi phh based. Nothing change as far as i notice.
Great initiative @mKenfenheuer !
I'll look into the settings to see if there are other that we could use!
@ospeto from what I see in the commits try to see if volte works and if you can switch user profiles.
exadeci said:
Great initiative @mKenfenheuer !
I'll look into the settings to see if there are other that we could use!
@ospeto from what I see in the commits try to see if volte works and if you can switch user profiles.
Click to expand...
Click to collapse
I can switch user profiles just fine. Havent test volte though. By the way , the maximum brightness of gsi roms are not as bright as stock rom. Is there any fix for it?. I tried setting backlight to 255 but still not fixed.
ospeto said:
I can switch user profiles just fine. Havent test volte though. By the way , the maximum brightness of gsi roms are not as bright as stock rom. Is there any fix for it?. I tried setting backlight to 255 but still not fixed.
Click to expand...
Click to collapse
I assume switching user profiles has not been working until now?
I have just unlocked my bootloader and started working on the kernel source so lets hope i can get this moving.
I will focus on the kernel first and once this is working we can start with getting other things working.
mKenfenheuer said:
I assume switching user profiles has not been working until now?
I have just unlocked my bootloader and started working on the kernel source so lets hope i can get this moving.
I will focus on the kernel first and once this is working we can start with getting other things working.
Click to expand...
Click to collapse
I haven't switch user profile before so i also am not sure. Should i delete your apk and test again?. I can't test volte cuz my sim provider stopped supporting volte. Thank you so much for your effort. I hope you can fix brightness, 90hz display and on display fingerprint. That would be very helpful for gsi users.
The fingerprint must be an overlay issue because even with bootloader unlocked it still works
Problems I'm facing with evolutionx gsi
1-no fingerprint or face unlock (face unlock was removed from Android Q but it can be added)
2-there's no 90 hz refresh rate
3-speaker volume is lower than color is
4-brightness is slightly lower than color os also
5-need the stock camera app for video recording because gcam isn't that reliable with video recording
talalahmed said:
Problems I'm facing with evolutionx gsi
1-no fingerprint or face unlock (face unlock was removed from Android Q but it can be added)
2-there's no 90 hz refresh rate
3-speaker volume is lower than color is
4-brightness is slightly lower than color os also
5-need the stock camera app for video recording because gcam isn't that reliable with video recording
Click to expand...
Click to collapse
There is a fix for the 90hz issue for the OPPO device
90hz just fixed with dtbo.img flashing. U can find it on your how to flash android 10 gsi post's comment. I am using with 90hz now and it is working flawlessly.
ospeto said:
90hz just fixed with dtbo.img flashing. U can find it on your how to flash android 10 gsi post's comment. I am using with 90hz now and it is working flawlessly.
Click to expand...
Click to collapse
Yeah just flashed it and it's amazing
@exadeci all changes were merged into phhussons main repo and will be available in the next release.
He will also include a option in settings to force the display to a specific frame rate (eg.g 60hz) as 90hz will be the default with the overlay.
Sorry for maybe stupid question, but what letters “GSI” stand for?
SamePaul said:
Sorry for maybe stupid question, but what letters “GSI” stand for?
Click to expand...
Click to collapse
GSI -> Generic System Image
If you want to know how to flash one onto your x2 pro have a look here
https://forum.xda-developers.com/re...-to-flash-aosp-android-10-gsi-realme-t4036825
Hello , i think maximum brightness on gsi roms are not as bright as stock one. Is it gsi rom's bug or do we need overlay for it. I want to watch HDR content so i hope this can be fixed.
https://www.techbilla.com/gsi-treble-fixes-for-realme-2-pro/
This one is not working with our device
Hello
here is a Android 10 release of crDroid 6.5 from 16.4.20 for download:
https://yadi.sk/d/TD-kDw6UvZbvoQ
I got it running on my Mi 9T, without any issues.
Even the fingerprint sensor works very fine, its my daily driver.
It has lots of customization options
It is official rom?
Can I flash it on indian k20
I dont think its official.
I am not the developer , but I am very happy with crDroid on my Davinci.
I tested very much other roms, every one had issues with something.
Mostly with the fingerprint sensor or the customization options.
With a backup from your previous system its worth a test
Is it smooth ROM like, for instance, Pixel Expirience? Does ANX Camera works in it? Which gapps do you use on this ROM?
does all functions works ok?
I didnt find anything what is not working.
Pixel Exp. is nothing for me, to less options. But yes, it runs smooth.
The battery life is amazing.
I use opengapps nano, because when pixel launcher is installed the orignal laucher has problems.
And the gcam port from urnyx works very fine. Havent anx cam installed yet.
Volte/vowifi working? And stupid question but does it ask for FP when double tapping a notification or just pin?
Used to use crDroid back in my Samy S2 days so interested to see how its come along.
videoseven said:
I dont think its official.
I am not the developer , but I am very happy with crDroid on my Davinci.
I tested very much other roms, every one had issues with something.
Mostly with the fingerprint sensor or the customization options.
With a backup from your previous system its worth a test
Click to expand...
Click to collapse
Then who is the developer !!!
I found the download with Google.
Dont know whos the dev.
Crdroid is my absolute favorite rom , hope there will be an official build on the crdroid page
@nikc0069
You can unlock with fingerprint or pattern.
How can I test Volte/vowifi ?
Volte is on per default, Wi-Fi calling can be enabled
Found the ROM on 4pda, the develop name is Razziell of that forum, this is the know bugs written on the post:
ANX camera not supported!
After making calls on the bt headset while playing music, you need to reconnect the headset / headphones, since the audio stops playing (the same applies to the GU)
It is better to write about the problems found in telegram (link in the profile) or in qms.
Click to expand...
Click to collapse
Installation instructions:
Requires an unlocked bootloader and the presence of TWRP.
Installed on any stock firmware based on 10 android.
!! The firmware contains its own vendor - you don’t need to install others and it is extremely undesirable !!
It is required to install firmware from global 10 version 11.0.4 / 5 or the latest Chinese dev!
Click to expand...
Click to collapse
If want more information look at his telegram channel
https://t.me/crdavinciunoff