Hi guys, yesterday I downgraded my phone from 11.0.6 to 9.4.12 because of bad battery life on miui 11. But the problem now is that miui 10 screen cast is really bad. And I use that a lot to watch movies on TV. Anyone has a workaround for this and can suggest an app or anything I can do?
On miui 11 the screen cast app didnt disconnect everytime. Also when you cast on your tv, after sometimes it turns off the screen to save battery. On miui 10 the screen stays on all the time.
Hope someone can help, If not I'll need to flash another rom on the phone.
on MIUI 11.0.6 you have the option to continue screen cast with screen off.
I use it myself.
schubeir
schubeir said:
on MIUI 11.0.6 you have the option to continue screen cast with screen off.
I use it myself.
schubeir
Click to expand...
Click to collapse
Yea that's what I'm missing when I went back to miui10. Right.now I'm am latest PE. The screen cast is better than on miui10 but it still doesn't turn off the screen while casting.
Related
I have a unrooted S3, problem is that the screen times out during flash videos on fullscreen. Any way to fix it without increasing the time-out to 10 mins?
polesp said:
I have a unrooted S3, problem is that the screen times out during flash videos on fullscreen. Any way to fix it without increasing the time-out to 10 mins?
Click to expand...
Click to collapse
Enable "smart stay", so if your watching the display, it will not timeout
Phone menu > settings > display > smart stay .............
anyway of keeping full screen videos on until the video has finished? Smart stay is only ok if youre looking at the screen directly. I often have it laying flat on a table or my bed while lying down and watching it from an angle the phone will still go into standby. If you dont full screen the video and just watch in the browser it will stay on.
Im sure it never used to turn off when on ICS and its only since JB that this started happening. It must be something to do with the stock browser as if i use firefox and full screen the video it will stay on until the video has finished. Trouble is i dont want to use firefox permanently as i dont like the way it handles book marks. For everything else i much prefer the stock browser, just not this one issue.
Having the same annoying problem as well. I can't use smart stay since i'm watching online videos in the dark. Never had this problem when I was still on stock ics. I'm currently running omega rom, using default browser and adobe flash player 11.1.. Is there any custom fix or workaround with this type of issue? It bugs me when the video would start over when my phone locks automatically.
Help me
I am Japanese and I am not good at English.
Because it translates and writes, it may not be correct English.
I can not unlock after sleep.
The screen lights up with the power button.
But swiping the screen does not react.
In this case it is OK.
case 1
In Recovery Mode (TWRP), I can swipe the screen to unlock even after sleep.
Case 2
I can use it without problems until you sleep or lock after powering on from power off.
However, after locking with sleep or power button, the screen lights, but you can not swipe.
Initialization already done
Reinstalled ROM (Officiak MIUI, CM12 etc)
But it does not fix it
Well, this can be one of two issues:
1. Hardware issue, and a very weird one. Almost one-of-a-kind.
2. What MIUI version have you tried? 8.5.10 MIUI 8? You can also try MIUI 7 or the MIUI 9 beta. Try all of them and see if any of them works.
I tried these ROMs
I have not tried MIUI 7, but have any good signs to try?
miui official HMNote2Global_V8.5.1.0.LHMMIED
xiaomi.eu_multi_HMNote2_7.9.21_v9-5.0.zip
Thank you.
I tried these ROMs
I have not tried MIUI 7, but have any good signs to try?
miui official HMNote2Global_V8.5.1.0.LHMMIED
xiaomi.eu_multi_HMNote2_7.9.21_v9-5.0.zip
Thank you.
My Redmi Note 2 has the MIUI 8 8.5.1.0 and no problems here. For MIUI 7 you can try 7.3.3.0 and for MIUI 9 have you tried 7.9.15? If not try these ROM versions and report back.
I tried, but the result was Ng.
7.3.3.0 and 7.9.15
Since it is not a software problem (apparently), since when has this issue started appearing? I am suspecting this is a hardware issue. Say everything you know, I will try and understand.
Since returning from sleep in TWRP mode is no problem, I think that it is not a hardware problem.
Since returning from sleep in TWRP mode is no problem, I think that it is not a hardware problem.
The problem is that the screen stops responding after sleeping normally after starting normally.
You can use it without problems until the screen goes to sleep.
give up.
(´；ω；`)ｳｩｩ
same case like me
I have flashing rr 6.0 and cm 13.0 and so on based Android 6.0. But except dinolek lineage worked, other's lock screen touch not work sometimes. It's wired. I don't think it's hardware's issue
Exact same problemfor me too. It's not Touch panel problem. I ordered new Touch panel + LCD + frame replacement. After replace still same issue.
If the device goes to sleep -wake up, touch panel stop working.
After reboot phone works perfectly until it sleeps again.
hi,
I have a Redmi Note 3 SE (kate) running lineageos 14.1 official. a while ago, the screen broke, so I ordered a new screen assembly and replaced the broken one with the new one. the screen works perfectly, but the digitiser doesn't... it _always_ works in TWRP, and seems to work when fresh flashing lineageos. after a reboot or update however, it stops working. when booting to recovery, it works perfectly, but not in lineageos.
has anybody got any idea what to try ? the assembly clearly is not broken, but I'm stumped. clean flashed multiple times, always with the same problems.
check that the flex of the screen is well connected
My screen is replaced too, try agni kernel it have option to fix replaced screen issue. But double tap to wake is gone, and sometimes after screen off, touchscreen doesnt work you must turn on/off the screen and it will work again
strawjerry said:
My screen is replaced too, try agni kernel it have option to fix replaced screen issue. But double tap to wake is gone, and sometimes after screen off, touchscreen doesnt work you must turn on/off the screen and it will work again
Click to expand...
Click to collapse
agni pure los n kernel fixed it for me, thanks !
Hi everyone, I'd like to ask you a question. I have a Mi Pad 4 and every time, after booting, the touch screen does not appear to respond immediately to the commands on the lock screen. I have to press the screen randomly to make it work. Once the touch starts, the tablet works perfectly.
Can you tell me if I'm the only one with this problem?
Thanks!
I do too. The screen would hang up when boot. I have to turn off the screen and on again for it to work.
And anyone have auto shutdown bug? Mine will auto shutdown when enter deep sleep and battery is below 15%, even when plugged in. Nothing happen above 15%.
Never_Sm1le said:
I do too. The screen would hang up when boot. I have to turn off the screen and on again for it to work.
And anyone have auto shutdown bug? Mine will auto shutdown when enter deep sleep and battery is below 15%, even when plugged in. Nothing happen above 15%.
Click to expand...
Click to collapse
Fortunately I'm not the only one with this problem/bug.
Regarding the DeepSleep and the shutdown I have never try to verify it. Usually when the tablet is 30% I recharge it.
I'll try to test that.
Currently I have the HavocOS 2.8 ROM and I don't know if the deepsleep is set in the same way. But ill will try and I let u Know.
If someone else has our problems please reply this thread.
Yes after boot I have to pick up the tablet and move to unlock the screen faster.
Maybe its a feature?
It appears in TWRP too
paul-planlos said:
Yes after boot I have to pick up the tablet and move to unlock the screen faster.
Maybe its a feature?
It appears in TWRP too
Click to expand...
Click to collapse
I don't know, I thought it was just my problem, but apparently I'm not the only one. Even with TWRP and custom rom happens
Hey , i just updated the android 10 in my (secondary) device and the always on display stays only for 5secs . Do anyone knows how to keep it always on. I am in stock EU rom.
So i fix it by updating some apps from the google playstore. I think it is good to know
Was happening to me as well, AOD either turned off by itself after a while, or didn't turn off with proximity sensor covered. "Somehow" it got fixed after few hours, hope it stays functional.