ProtonKernel is a kernel based on stock Samsung Kernel with the lastest linux ELS patches and aims to give smooth performance for daily use with improved battery life.
Features:
-Added Various sched fixes and improvements
-Added Fsync on/off toggle
-Added Led fade
-Added Boeffla Wakelock blocker
-Disabled Hotplug (max freqs are now 1794mhz but its still smooth for daily use)
-Disabled crc check (better Performance)
-Enabled PELT_HALFLIFE 16ms (More Responsive)
-Enabled Dex on any HDMI Adapter
-Fixed workqueue_power_efficient_toggle
-Magisk 20.4
-Now based on AK3 installer script
-Based on latest ELS source with all updates and patches
-Used AndreiLux´s scheduling for the cpu´s
-Disabled input boost for more batterylife
-set Readahead to 64kb
Download links:
AndroidFileHost
GDrive
Telegram Group & News Channel:
Support Group
News Channel
Github Source
Version Info:
-Status: Stable
-Version: 20200428
Credits:
[email protected]favoritus for the Base
[email protected]ananjanser1211 for help with compiling and bug fixing
[email protected]nalas for also helping with compiling and bug fixing
[email protected]osm0sis for the AK3 script
- And all others who authored The commits
Changelog:
20200501:
-Rebased on latest Note 9/S9 sources
-Upstreamed to Linux 4.9.220
-minor improvements
-fixed Note9 Boot
20200422:
-Same as previous versions (see thread)
-added more sched fixes/improvements
-possible removed ssrm/xml error
Reserved...
Thanks will try it out tomorrow and post feedback.
Can N960N use?
Flashed on Dr.Ketan. Boots fine but I got some random error about a XML parsing something. No clue what it means but k.
I'll test it a bit longer. Will update you. It feels very very responsive so far.
phanthanh50 said:
Can N960N use?
Click to expand...
Click to collapse
I flashed on my device (n960n) tried for a while.
No issues, I think it's safe to use it provided you are using a Rom with an April patch.
Also, you don't need to flash Magisk again, which is neat.
Can you add gestures and morro sound
vishnu vijay said:
I flashed on my device (n960n) tried for a while.
No issues, I think it's safe to use it provided you are using a Rom with an April patch.
Also, you don't need to flash Magisk again, which is neat.
Click to expand...
Click to collapse
I actually don't use an April ROM. Ketan is on February patches and it works fine so far. It got noticably less hot when charging overnight as well which is nice.
help
Imprezzion said:
Flashed on Dr.Ketan. Boots fine but I got some random error about a XML parsing something. No clue what it means but k.
I'll test it a bit longer. Will update you. It feels very very responsive so far.
Click to expand...
Click to collapse
Help
tabish84 said:
Can you add gestures and morro sound
Click to expand...
Click to collapse
i will add moro sound in next version thx
Arcsin2 said:
ProtonKernel is a kernel based on stock Samsung Kernel with the lastest linux ELS patches and aims to give smooth performance for daily use with improved battery life.
Features:
-Added Various sched fixes and improvements
-Added Fsync on/off toggle
-Added Led fade
-Disabled Hotplug (max freqs are now 1794mhz but its still smooth for daily use)
-Disabled crc check (better Performance)
-Enabled PELT_HALFLIFE 16ms (More Responsive)
-Enabled Dex on any HDMI Adapter
-Fixed workqueue_power_efficient_toggle
-Magisk 20.4
-Now based on AK3 installer script
-Based on latest ELS source with all updates and patches
-Removed GPU boost to reduce heat during long gaming (thx to @diepquynh)
-Enabled zram (2048kb)
-Used AndreiLux´s scheduling for the cpu´s
-Disabled input boost for hopefully more batterylife
Download links:
AndroidFileHost
Telegram Group & News Channel:
Support Group
News Channel
Github Source
Version Info:
-Status: Stable
-Version: V1
Credits:
[email protected]favoritus for the Base
[email protected]ananjanser1211 for help with compiling and bug fixing
[email protected]nalas for also helping with compiling and bug fixing
[email protected]osm0sis for the AK3 script
- And all others who authored The commits[/CENTER]
Click to expand...
Click to collapse
Boeffla wakelock included ?
Many thanks in advanced
enebro77 said:
Boeffla wakelock included ?
Many thanks in advanced
Click to expand...
Click to collapse
Yes
Support N960N ? Thanks
phanthanh50 said:
Support N960N ? Thanks
Click to expand...
Click to collapse
no
phanthanh50 said:
Support N960N ? Thanks
Click to expand...
Click to collapse
It works for my N. most likely whatever works for N960F/DS will/should for the N aside csc chamges.
Bootloops like 98% of time, and whenever it manages to boot the xml error comes up and makes me unable to unlock the phone.
I'm running the latest DevBase rom.
Hi i too had xml error everytym i boot
I get the error too but I can just click it away and unlock normally. Kernel itself performs quite well actually on Ketan ROM now that I ran it a few days.
no file in this folder？
the link has something wrong
Related
[64-bit][KERNEL][UBER-TC][15 Oct]Spirit.Kernel r3 [CAF]
Spirit Kernel
This kernel works on all the latest roms available which require new kernel source.
Statutory Warning: This kernel is not a feature bloated kernel like other kernels available, if you like tons of govs/io and hotplugs all in one and if you like to blow up your device, then you are at the wrong spot. This kernel will be minimal and only necessary features will be added.
A while back my users requested me to make a kernel which supports new ROMs(as few of them fail to). So I have decided to make a kernel which contains essential features along with stability and smoothness.
I will update this regularly as I have time and will add new features and fixes as well.
If you have any feature requests, don't hesitate to post it here!! I will consider if I like it
PLEASE READ
How to report a bug?
Include the following in your bug report:
The ROM you are currently using + a link to the ROM's thread
A log, preferably dmesgs or kmsgs (use Google to find out how to pull these from your device)
The version of SpiritKernel you use (=rx, e.g.r3)
Bug reports not meeting these requirements will be ignored.
NO BUG REPORTS ON EXPERIMENTAL BUILDS!
Features
This Hybrid kernel contains features from great kernel devs with like faux,franco etc, optimized for tomato to make it work.Initially there are less features but I will add much more soon
[*]Based on the Latest CyanogenMod sources
[*]CAF Patches by Abhinav
[*]Governors: stock for now
[*]Hotplug: ThunderPlug 2.5
[*]KCAL Driver by savoca
[*]Powersuspend by faux123
[*]FRandom module
[*]Adreno Idler by arter97
[*]Advanced TCP Congestion
[*]Built using UBER TC
[*]LMK Optimizations
[*]Graphite flags
[*]ANY Kernel zip
[*]And other opts
[*]TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD
TO-Do List
New Govs and I/Os
GPU OC and UC
* Recommended app for tweaking the kernel: FauxControl,Kernel Auditor or TricksterMod
How DO I flash this?
Reboot to recovery.
Install zip from SD Card.
Choose the Spirit.Kernel-rx-tomato.zip
Install and Reboot.
Changelog:
Click Me
Downloads:
Basketbuild
Source:
Github(branch:cm-12.1-amss-1.0.2)
Wiki containing changelogs,settings and more
Credits goes to these SUPERHUMAN for Inspiration and support (In no specific order)
Varun Chitre
Abhinav Jhanwar
arter97
faux123
yank55lu
savoca
cyanogen
And my supporters
And more
XDA:DevDB Information
Spirit.Kernel for YU Yureka, Kernel for the YU Yureka
Contributors
DC07
Source Code: https://github.com/DC07/spirit_msm8916
Kernel Special Features: CAF,KCAL,ThunderPlug,Adreno Idler and much more
Version Information
Status: Stable
Created 2015-10-10
Last Updated 2015-10-15
Does it support miui
DC07 said:
and if you like to blow up your device
Last Updated 2015-10-10
Click to expand...
Click to collapse
What do you mean ?
Does a bloated kernel 'blows up' device ?
baratheon16 said:
What do you mean ?
Does a bloated kernel 'blows up' device ?
Click to expand...
Click to collapse
adding unnecessary features and modifying codes without knowing anything does.
for eg. adding 4-5 hotplugs (enabled by default) and all working at once does.
Regards
Update is live.
Changelog
Dynamic FSync
ThunderCharge Control from Varun Chitre
Added Darkness governor
-OFast flags for more opt
Arch Power
vegas tcp tweak
Removed wlan.ko which was accidentally added
For more check github.
Enjoy.
Update is live
======r3=====
What's new?:
* F2FS and NTFS Support
* SWAP Support
* Enable all CPU cores while boot for quick boot
* kill some logspam
Changelog:
a47e11c spirit: use all cores on-boot for faster bootup
184bd1a moar changes
addc11d spirit: rework build script and bump to r3
9d5f29e spirit: add changelog.sh
52fcf5b spirit: Add NTFS Support
031757e Revert "dts : use all cores on-boot for faster bootup"
19b2c34 spirit: enable swap
701bcef mm: page_io.c: remove write error messages for swap devices
db6f10b mm/zswap: NUMA aware allocation for zswap_dstmem
122a852 mm/zswap.c: remove unnecessary parentheses
a37407a mm/zswap: support multiple swap devices
fa8792d mm/zswap.c: update zsmalloc in comment to zbud
58374d9 mm/zswap.c: fix trivial typo and arrange indentation
b1a1ec6 mm/zswap.c: change params from hidden to ro
2d81f29 mm/zswap: refactor the get/put routines
a664710 vnswap: integrate vnswap from Samsung
0a12121 mm/zswap: bugfix: memory leak when invalidate and reclaim occur concurrently
431421d mm/zswap: avoid unnecessary page scanning
4eeb42b mm/zswap: bugfix: memory leak when re-swapon
9a8de22 mm/zswap: use postorder iteration when destroying rbtree
65a7d5a mm/zswap.c: get swapper address_space by using macro
8af692f dts : use all cores on-boot for faster bootup
10b0414 spirit: updates to build.sh
699223a tomato: Enable f2fs
7986854 arm64: Kill logspam
Download: https://basketbuild.com/filedl/devs?dev=DC07&dl=DC07/Spirit/tomato/Spirit.Kernel-r3-20151015.zip
=====r3=====
Enjoy.
can we flash this on stock yureka rom! cm 12.1??
rishivg said:
can we flash this on stock yureka rom! cm 12.1??
Click to expand...
Click to collapse
It won't work on stock COS.
It works on AOSP and CM based roms
does it work for yureka plus?
does it work in blisspop rom
adamnp2000 said:
does it work in blisspop rom
Click to expand...
Click to collapse
Yea... It does... I am using it right now with blisspop
kdhupar0 said:
does it work for yureka plus?
Click to expand...
Click to collapse
yes, it does
Can you give us a daily usage setting for the kernel, please?
fanatic75 said:
Can you give us a daily usage setting for the kernel, please?
Click to expand...
Click to collapse
Check op
Work with cm13 ?
Any update @DC07?
Sent from my AO5510 using Tapatalk
This kernel is good but yureka plus is too damn slow on darkness governer.. Have to keep it on performance.. Any settings for a balanced usage without lags and good battery backup??
Thanks for the kernel.. ??
Does it supports MIUI 7?
Pls add 2.0ghz oc
DC07 said:
It won't work on stock COS.
It works on AOSP and CM based roms
Click to expand...
Click to collapse
So not compatible with Stock CM12.1 rom
Correct
This is my Caramel Kernel for the Redmi 2/Pro Xiaomi. It's based off the CM kernel available on CyanogenMod's GitHub. Flash it using TWRP. Bug reports and contributions are welcome.
Disclaimer:
This kernel is provided AS-IS, with no warranties. I am not responsible for bricking your device. Flash at your own risk.
Features:
Increase zRAM devices
Improves on square root algorithm
Compiled with Linaro 4.9 GCC generic
Fixes and improves on ipv6 protocol
Optimized some operations for the good xperience
Some patches from CAF for fix issues
Use lz4 zRAM
Special clean up
VFP and neon optimizations
MSM Hotplug
Shed optimizations
Silence log spam
Add optimized SHA
Minor cleanups
Some improves for performance
Faux Sound Control 3
Kcal control
Release history:
Code:
r1: March 25, 2016
- Initial public release
r2: March 27, 2016
-Special improves in zRAM
-Use of lz4 zRAM
-Added MSM Hotplug
-Added support for Neon Mode
-Clean up some dead code
-Removed obsolet code from zsmalloc and zRAM
r3: May 11, 2016
-Shed optimizations
-Silence log spam
-Add optimized SHA
-Minor cleanups
-Some improves for performance
r4: May 13, 2016
-timer: apply_slack() optimization
-qpnp-vibrator: Add Vibrator Control
-Add Faux sound control 3
-Asynchronous I/O latency to a solid-state disk greatly increased
-fs: reducing vfs cache pressure
-mdss : add MDSS Advanced Color Control (formerly KCAL)
r5: May 14, 2016
-cpufreq: Add lionfish governor v1.1
-Reduced wakelocks
-Speed up console framebuffer imageblit function
-sched/rt: Reduce rq lock contention
-Writeback: Fix occasional slow sync
-usb: add usb fast charge
-sched/fair: Fix fairness issue on migration
-Added SIO ioshed
r6: May 18, 2016
-sched: enable HMP-aware task placement
-improves on CRC
-sched/fair: Implement fast idling of CPUs
-Optimized ARM RWSEM algorithm
-Support of GCC 5
-Fixed some problems with GCC 5
-Building with Uber 5.3
Download:
Lastest release
XDA:DevDB Information
Caramel Kernel, Kernel for the Xiaomi Redmi 2
Contributors
TechnoAnder
Source Code: https://github.com/Ander-Alvarez/android_kernel_cyanogen_msm8916
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r6
Stable Release Date: 2016-05-18
Created 2016-03-25
Last Updated 2016-05-18
have you tried it?
I don't tried it buy my tester yes. He says that it works perfect and He don't found issues. Enjoy!
Works on what ROM? Cyanogenmod only? If so, what CM? 12.1 or 13? Give at least details about it.
hardsonic said:
Works on what ROM? Cyanogenmod only? If so, what CM? 12.1 or 13? Give at least details about it.
Click to expand...
Click to collapse
sorry, i forget say it. this kernel work on cm-13.0 and may be on aosp mm.
remember that you contributions are welcome, any issue that you have with this kernel report from here for find the fix, enjoy!
Please build kernel in miui or cm11 ??
where is the hotplug section in kernel audiutor??
add some hotplug..phone heat up pretty fast..
ibal97 said:
where is the hotplug section in kernel audiutor??
add some hotplug..phone heat up pretty fast..
Click to expand...
Click to collapse
In the next release I will add hotplug.
TechnoAnder said:
In the next release I will add hotplug.
Click to expand...
Click to collapse
nice..waiting for the next build..I can be a tester if you want..
Caramel Kernel r2
In this release im focused on the good performance of Android MM. Some features as the use of lz4 increase the speed and increase the battery performance; also the clean up of multiple dead code help to delete the lag on Android, some optimizations as Kernel mode neon and VFP optimizations give to Android an good xperience, the r2 works perfect, if you have any issue tell me here, ah and other good feature added is the MSM Hotplug from Qualcomm, enjoy it users!!!
DOWNLOAD: here
TechnoAnder said:
Caramel Kernel r2
In this release im focused on the good performance of Android MM. Some features as the use of lz4 increase the speed and increase the battery performance; also the clean up of multiple dead code help to delete the lag on Android, some optimizations as Kernel mode neon and VFP optimizations give to Android an good xperience, the r2 works perfect, if you have any issue tell me here, ah and other good feature added is the MSM Hotplug from Qualcomm, enjoy it users!!!
DOWNLOAD: here
Click to expand...
Click to collapse
everything looks good now ...less heat produced in gaming..less lag butter smooth ui...nice improvement bro
requesting usb fast charge
tested with 1gb variant ,tesla rom
ibal97 said:
everything looks good now ...less heat produced in gaming..less lag butter smooth ui...nice improvement bro
requesting usb fast charge
tested with 1gb variant ,tesla rom
Click to expand...
Click to collapse
Awesome!! In the next Release I will add fast charge
TechnoAnder said:
Awesome!! In the next Release I will add fast charge
Click to expand...
Click to collapse
waiting for perfection.. great work bro
cant flash on cm13 latest build. successfully flash tru twrp but not sticking...
wakaranay said:
cant flash on cm13 latest build. successfully flash tru twrp but not sticking...
Click to expand...
Click to collapse
What issue is?
wakaranay said:
cant flash on cm13 latest build. successfully flash tru twrp but not sticking...
Click to expand...
Click to collapse
try to mount /system
ibal97 said:
try to mount /system
Click to expand...
Click to collapse
can you pls guide me on how to do
wakaranay said:
can you pls guide me on how to do
Click to expand...
Click to collapse
go to recovery (kumajaya built twrp 3.0. is recommended)
mount /system
install(search the kernel.zip)
swipe to flash
clear dalvik/art cache
reboot the device
then open setting ,about phone to confirm the installation
ibal97 said:
go to recovery (kumajaya built twrp 3.0. is recommended)
mount /system
install(search the kernel.zip)
swipe to flash
clear dalvik/art cache
reboot the device
then open setting ,about phone to confirm the installation
Click to expand...
Click to collapse
mount and then select/choose system only?
then go to install? am i right?
Mod Edit: Thread Closed per OP request
Welcome to the N0G33K edition Kernel
This kernel is built on the idea of having optimized battery life and performance. A well made balance between these two is what you get.
Read this first
Please do not post requests, because this is my personal kernel and I won't add any stuff I do not want myself (i.e D2W, S2W, AOD, sound control etc). Also I won't add any other support for other devices. Last but not least: I don't reply to questions like: "which governor/scheduler is the best" etc. The choice is all yours.
PS: You need to root yourself (Magisk on Nougat or SuperSU on Marshmallow)
Features
- Based on A810FXXU2CRH7 source
- Unified kernel that supports G920/G925 F/I/S/K/L/T/W8 models
- Upstreamed to Linux version 3.10.108
- Extra governors & I/O schedulers
- Linaro 6.5 compiler
- Always on display (AOD) support
- Wireguard support
- Knox 0x0 with safetynet bypass
- Permissive mode by default
- Synapse Control for OC/UC, voltages and a lot more
- LZ4 1.8.3
- Other misc optimizations
Download:
- V4 Marshmallowhttps://mega.nz/#!xxAAwBTA!2IL8I5Dx5IZsZp_uwrIT_DKTabzFu8_P6NlkD2EFORk
- Final Nougat https://mega.nz/#!RxhTHaaR!OLsnZ7yulPnaWd-mfSB1JCfMql3M_PjaUWyiFTMi1_U
Changelog:
V1
- Reworked whole kernel
- Optimized battery and performance
V1.1
- Reverted some stuff to test 3
- Fixed Fading LED
V1.5
- Tweaked LMK
- Optimized Workqueue
- Added battery efficiency patches
- AES put to x4 for more speed
- Readahead tweaked
- Vnswap to fast device
- HMP adjusted for more smoothness / battery efficiency
V1.8
- Reverted LMK and Workqueue edits.
- Enabled powereffici�nt Workqueue
- Tweaked Interactive governor
- Added Powersuspend
- Added more Binder changes for UI smoothness
- HMP and Cpuidle improvements.
- LZ4 Compressed
1.9
- Went back to UBERTC 5.3 because N0G33K V1.8 had kernel panics.
- Removed wlan wakelock control and reduced it myself.
- Some other edits and reverts
V2.0
- Reverted ALOT of changes I made in previous versions.
- Updated Kernel source to the latest DPJ2 source
- Compiled with Sabermod 7.0 Toolchain with CCache (should be stable now)
- Updated Linux to 3.10.104
- Backport latest Linux 4.8 random driver (= like super Seeder)
- Backport latest crypto algorithm Chacha20
- Added new battery efficiency patches
- Tweaked interactive governor for better performance/battery.
- Added new governors: Yankactive, Smartmax and Smartmax_eps
- Updated BFQ I/O
- Added dual sim support
- Fixed Invisible CPUset (should actually work now)
- Screen on hotplug disabled (Dynamic hotplug wasnt good enough)
- Added wakelock controls again.
- Updated Synapse
- Patched "Dirty Cow" (CVE-2016-5195) exploit
- Zswap improvements
- Disabled big cores on screen off
- Improved CPUIdle
- Powersuspend hooks added
- and more
V3
Reworked the whole kernel:
- Based on U5DPL4 source
- Powersuspend is out, State Notifier is in.
- Replaced Linux 4.8 random driver with Frandom
- Interactive governor: merged Galaxy S7 Interactive changes (android N changes wont boot, so kept it MM)
- Merged S7 zswap/zpool and zsmalloc android N changes
- Added Impulse governor
- Tweaked I/O Schedulers for our SSD + Zen V2 update
- Xbox control support added and updated to latest upstream (can be enabled in Synapse)
- Noatime as default for better performance
- SafetyNet patched (soon there probably will be a workaround for it...so enjoy as long it lasts)
- More wakelocks toggles added
- Sync on suspend disabled
- Improved Idle drain
- Android OS drain should be better now.
- Removed some other stuff that caused yank like invisible cpusets
V4
- Updated Linux kernel to 3.10.105
- Updated Safetynet patch
- Binder updated to latest Linux 4.6 (smoother UI)
- Backported Linux 4.1.38 random driver and removed Frandom
- DVFS decision mode in Synapse added
- DVFS: scale to 1k instead of 1.2k GHz
- Backported latest CPUidle driver from Linux 4.7 (should give better idle experience throughout the day)
- Other misc optimizations
V7
- Rebased kernel and kept it quite stock/light
- Doesn't use recycle commits (= commits that have been using in all S6 kernels for the last 4 years, without anything new).
- Based on the A810FXXU2CRH7 source code, which means that its newer than any G920x source out there.
- Upstreamed to 3.10.108
- Unification added to work for nearly all S6(e) devices (No A & P model support)
- Improved touch latency
- LZ4 fast 1.8.3
- Compiled with Linaro 6.5
- Added Wireguard support
- Great performance and battery life -> Ask @ananjaser1211 who copied the kernel
The kernel wont be updated anymore (no oreo support/updates), therefore enjoy this last kernel while it lasts. If something is broken in Synapse, then so be it.
Credits:
- CODEG33K - Dear friend that I partially named kernel after
- Aria.A97 - Intensive daily testing
- Everyone else I cherry-picked from.
Source Code: https://github.com/Noxxxious/S6
Want to use this in your rom?: Don't, just forward to the thread.
Disclaimer: I am not responsible for all the damages followed by or to your phone after flashing this kernel. If it bricks, wipes, explodes and you will hold me responsible I will only laugh
Known issues:
- Probably Synapse "backup profile" doesnt work.
F.A.Q. - Frequently Asked Questions
Q: Synapse says no UCI detected
A: Install Busybox to system/xbin
Q: I had a reboot
A: Only report it here if you didn't undervolt and do it with a log.
A2: If you had random reboot without undervolting, then make a proper log please. Which means I need a last_kmsg from right after the reboot.
You create the log by using this command in adb shell or a terminal or use any 3rd party app like Syslog.
Code:
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Good luck .
Maybe you will add for g925F support to .
senzatiOn- said:
Good luck .
Maybe you will add for g925F support to .
Click to expand...
Click to collapse
+1
That will be awesome
@senzatiOn- @Sommerrain
Read my "Read this first". Already said that I wont.
But never say never, who knows.
So if rhis works with 920f does that mean it work with 920i
panda968 said:
So if rhis works with 920f does that mean it work with 920i
Click to expand...
Click to collapse
Yes, 920F/I same device, just different regions.
Happy flashing :good:
Quintz said:
@senzatiOn- @Sommerrain
Read my "Read this first". Already said that I wont.
But never say never, who knows.
Click to expand...
Click to collapse
I have read this.... i just ask... MAYBE
GL & HF
I lost RIL (signal) after flashing V3.
Unknown IMEI, but efs partition intact.
Going back to Arter v22 Grace, fixes this issue.
OP is aware of this, and will look into it, so have a nandroid backup in your hands, and be sure you have a fresh efs backup, prior to flashing V3.
It might not happen to you, but since some users have V3 installed already without issues, consider your self warned.
-----
senzatiOn- said:
I have read this.... i just ask... MAYBE
GL & HF
Click to expand...
Click to collapse
Thanks !
CODEG33K said:
I lost RIL (signal) after flashing V3.
Unknown IMEI, but efs partition intact.
Going back to Arter v22 Grace, fixes this issue.
OP is aware of this, and will look into it, so have a nandroid backup in your hands, and be sure you have a fresh efs backup, prior to flashing V3.
It might not happen to you, but since some users have V3 installed already without issues, consider your self warned.
-----
Click to expand...
Click to collapse
Yes like I stated the N7 compatibility is still in beta. So far this is the first case where there is no signal. I am taking a look into it.
Also people you dont need an EFS backup or something, flashing back to stock or arter N7 kernel will just be fine.
I'm happy to see you finally here ?
Inviato dal mio SM-G925F utilizzando Tapatalk
Quintz said:
Thanks !
Also people you dont need an EFS backup or something, flashing back to stock or arter N7 kernel will just be fine.
Click to expand...
Click to collapse
Couldn't hurt
It's refreshing seeing a new kernel here, thank you for your efforts and your development, I shall surely be trying this out.
like u my bro and thanks for hard work
gave glory make perfect kernel for us
keep going im with you:fingers-crossed:
CODEG33K said:
Yes, 920F/I same device, just different regions.
Happy flashing :good:
Click to expand...
Click to collapse
If thats the case if i find a rom that only says 920f it will work for my phone
Great work!
Quintz said:
Thanks !
Yes like I stated the N7 compatibility is still in beta. So far this is the first case where there is no signal. I am taking a look into it.
Also people you dont need an EFS backup or something, flashing back to stock or arter N7 kernel will just be fine.
Click to expand...
Click to collapse
I can confirm, using tamerlan n7 port ROM, I lost signal and my IMEI
And thanks for your hard work , nice to see other developers on our device.
Netmain36 said:
I can confirm, using tamerlan n7 port ROM, I lost signal and my IMEI
And thanks for your hard work , nice to see other developers on our device.
Click to expand...
Click to collapse
Lol I'm using tamerlan and is all good
Cesarcami53 said:
Lol I'm using tamerlan and is all good
Click to expand...
Click to collapse
Yes wait, I help my friend to fix this
AlexisXDA said:
Yes wait, I help my friend to fix this
Click to expand...
Click to collapse
Alexis signal works the problem is after every reboots takes like 2 minutes to get signal again
Argon kernel, for Android 8.1 & 9.0 ROM's (bacon).
Disclaimer:
use this kernel at your own risk. Flashing it without any knowledge of what you're doing may brick your device. I'm not responsible for any software/hardware damage.
Argon v11 is the last version for Oreo! Starting from v12 only Pie is supported.
Changelog:
v16.1 (August 11th)
support for OTG Y cables
minor bug fixes and security patches
Previous releases:
v16 (August 2nd)
kernel code base synced with LineageOS
lots of misc. bug fixes and small improvements
sdfat driver now replaces both vfat and exfat
some f2fs backports
v14 (April 24th)
built with the newest GCC toolchain for ARM
dynamic management of dirty page writebacks
some useless drivers have been removed (this might give us a few additional MB's of RAM)
a couple of improvements for the random number generator driver
IRQ threading is enabled by default (as suggested by Con Kolivas)
v13 (March 31st)
memory bandwidth overclock
lots of small updates and improvements (mainly for the assembly memory routines)
a few updates for the impulse CPU governor
new TCP congestion control algorithm: 'ascarex'
v12 (March 10th)
official Pie support (LineageOS 16 & Lineage-based ROMs)
small bug fixes and misc. tweaks
a few updates for the "impulse" CPU gov
memory management backports from Linux 3.8
lighter kernel (some debugging options have been turned off)
v11 (January 27th)
built with the newest ARM toolchain
power-efficient workqueues have been implemented in a couple of places
minor source updates & fixes
DDR bandwidth boost has been fixed
important updates for Sultan's CPU boost driver
v10.2 (January 19th)
synced with our LineageOS kernel (mainly bug fixes and security patches)
v10.1 (January 12th)
some source updates and bug fixes
v10 (December 29th)
built with the latest GCC 8 toolchain by Arm
some debugging options are disabled (this might slightly improve performance)
lots of small bug fixes and source updates
v9 (December 11th)
zzmoove governor updated to the latest version
boosted L2 cache frequencies
Spectrum support
Sultanxda's simple thermal driver (replaces Intellithermal)
miscellaneous kernel updates, backports and fixes
dynamic fsync has been (temporarily?) removed
v8.1 (November 23rd)
lots of kernel source updates & fixes
exFAT/sdFAT support
new CPU governors: intellimm, yankactive, zzmoove and impulse
dynamix fsync (disabled by default)
v8 (November 4th) - diff against v6:
built with GCC 8
old charging drivers (these are stable and work properly for everybody)
several improvements for the audio drivers, the memory management libraries, the CPU boosting driver, f2fs, zram, etc.
latest sdcardfs fixes from Google
Intellithermal (with configurable throttling threshold)
latest security fixes
CPU overclocking (disabled by default)
updated bricked hotplug
UKSM with automatic toggling (wip, it's not fully working as of now)
async fsync for ext4 and f2fs
v7.7 (October 23rd)
rebased on top of v7 + all the extra changes of v7.6
msm_hotplug removed (bricked is the default hotplug)
v7.6 (October 23rd)
completely rebased on top of Argon v6.1 (which seems to be the latest stable release) + the following changes
built with GCC 8.2
MSM hotplug enabled by default
cpu_input_boost improvements
latest sdcardfs updates
several other security fixes and improvements
v7.1, v7.2, v7.3, v7.4, v7.5 (October 10th - 11th - 15th - 16th - 17th)
stability fixes
v7 (October 9th)
msm_hotplug replaces bricked as the default hotplug
optimizations for msm8974 boards
older charging drivers from LineageOS 14.1 (they seem to fix all charging problems)
some more minor tweaks, fixes and optimizations
v6.1 (September 30th)
mpdecision is replaced by bricked hotplug by default
v6 (September 27th)
stability fixes
AIO optimizations reverted (this fixes filesystem errors for ext4 users)
slimbus overclock
several improvements and updates (for the ext4 fs, the LMK and many other drivers)
charging current interface
cpu_input_boost by Sultanxda (it replaces CAF's cpu_boost)
v5 (September 19th)
zram is supported
AIO optimizations & backports
minor tweaks and updates
v4 (September 15th)
Per-process reclaim
minor updates and improvements (including security fixes)
v3 (September 8th)
DDR bandwidth boost on screen unlock
misc. kernel updates, fixes and improvements
v2 (August 31st)
several secuirty fixes and kernel source updates
f2fs driver updates
new CPU hotplug: bricked hotplug
power-efficient workqueues are implemented in more drivers
v1 (August 24th)
based on idprophecy's kernel, thus it should be compatible with any Oreo ROM
built using QUVNTNM-TC, based on GCC 7.3.x
CPU underclocking (268,8 MHz)
several compiler optimizations enabled
sound contol by franciscofranco
lots of miscellaneous fixes and improvements
sysfs interface for Gentle Fair Sleepers and Arch power
power-efficient workqueues
Downloads
Latest version: here.
Argon kernel on MEGA
Argon kernel on AndroidFileHost
Thanks to:
@idprophecy
@dorimanx
@faux123
@Sultanxda
@CertifiedBlyndGuy
@osm0sis
@franciscofranco
@GalaticStryder
@nikhil18
the LineageOS team
and all the other authors of the hundreds of commits in Argon's github repo!
XDA:DevDB Information
Argon kernel for Oneplus One, Kernel for the OnePlus One
Contributors
Tomoms
Source Code: https://github.com/Tomoms/argon_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 16.1
Stable Release Date: 2019-08-11
Created 2018-08-24
Last Updated 2019-08-11
Reserved
How to set up the charging speed interface in Kernel Adiutor?
First thing, download the attached zip and decompress it. You'll find two .json files in it, place them in your internal storage and open KA. Go in the "Custom controls" tab, tap on the "+" button, choose "Import" and select the first of the files you downloaded, then import the second one too. Done! You can now delete the two files.
Keep in mind that the "0" value means that the standard charging logic will be used, and that the AC charging speed cannot be set to a value lower than 200 mAh, even though the slider allows you to set any value. If you set any value between 1 and 199, the driver will fallback to 200.
working fine with AEX 5.7.
is it compatible with oxygen os blobs or sultan blobs?
Running well for me on AEX 5.7.
antfior93 said:
is it compatible with oxygen os blobs or sultan blobs?
Click to expand...
Click to collapse
Starting from Oreo, all ROMs implement Sultan's camera, thus this kernel only supports Sultan's camera HAL.
New version is available
It's an important updates that brings lots of improvements (mainly "under the hood"), for more info I suggest you to check my Github repo!
Really nice work. Don't want to sound rude or something but is there a chance of getting a Pie build? ?
rolarocka said:
Really nice work. Don't want to sound rude or something but is there a chance of getting a Pie build?
Click to expand...
Click to collapse
Most probably, this kernel already works on Pie
You just need to flash it, then flash the Kernel Permissive Patcher (link - needed to set SELinux to Permissive before booting the OS) and you should be good to go. If you try, let me know the result!
What is the stock setting this kernel comes in? I want to try it but don't want to use root (for now). So I'm wondering what settings are default. Would kinda make this a flash and forget kinda kernel
twowheeler said:
What is the stock setting this kernel comes in? I want to try it but don't want to use root (for now). So I'm wondering what settings are default. Would kinda make this a flash and forget kinda kernel
Click to expand...
Click to collapse
The stock settings are kind of good. Not the best you could get, but close (I'll tweak the default configuration a little more in the future). If you're using idprophecy's ROM you will end up having maple as the default I/O scheduler, while if you're using other ROMs, I'm pretty sure you won't. Anyway, if you flash this kernel, I'm sure you'll benefit from the general improvements I implemented, which do not need any tweak to be enabled.
Works well on following ROMs;
-AOSiP 20180825( Argon v1 )
-TugaPower O25 ( Argon v2 )
Hi i installed it over AEX 5.7 . it works but charging is buggy. Keeps disconnecting and connecting .
tamboli007 said:
Hi i installed it over AEX 5.7 . it works but charging is buggy. Keeps disconnecting and connecting .
Click to expand...
Click to collapse
I have the same thing on all ROMs based on the LOS core. And this kernel is based, as I understand it, on the LOS core ... For example, with FranoKernel there are no such problems.
tamboli007 said:
Hi i installed it over AEX 5.7 . it works but charging is buggy. Keeps disconnecting and connecting .
Click to expand...
Click to collapse
MrYuraB said:
I have the same thing on all ROMs based on the LOS core. And this kernel is based, as I understand it, on the LOS core ... For example, with FranoKernel there are no such problems.
Click to expand...
Click to collapse
I experience the same issue when using a certain non-original (yet good-quality) cable. The weird thing is that if I charge the phone while it's turned off, it charges perfectly. Anyway, I can try to fix this issue. It shouldn't be difficult. I'll keep you informed.
Good to see you're still contributing for Bacon.
Tomoms said:
I experience the same issue when using a certain non-original (yet good-quality) cable. The weird thing is that if I charge the phone while it's turned off, it charges perfectly. Anyway, I can try to fix this issue. It shouldn't be difficult. I'll keep you informed.
Click to expand...
Click to collapse
Yesterday I tried to send you message, but it is why it is not sent... I agree
I've uploaded a new kernel!
Argon v3 is a small yet important update: it brings DDR bandwidth boost on screen unlock (basically, the RAM bandwidth is boosted when you unlock your phone so that opening an app immediately after waking the device from idle takes less time) and some general fixes & improvements for the kernel. More details are available on Github, as usual
Tomoms said:
I've uploaded a new kernel!
Argon v3 is a small yet important update: it brings DDR bandwidth boost on screen unlock (basically, the RAM bandwidth is boosted when you unlock your phone so that opening an app immediately after waking the device from idle takes less time) and some general fixes & improvements for the kernel. More details are available on Github, as usual
Click to expand...
Click to collapse
I've been loving the Kernel on AEX 5.7, but I've needed to reboot a few times because the screen won't turn on, or the screen has frozen.
Do you think that could be from the default underclock?
@Ruggerxpunk Same issue on my side since V2 version, but I don't have any logs cause I'm not using it at this moment.
DxT Kernel
* Your warranty is now void.
* I am not responsible for bricked devices, strained relationships,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
This kernel is only for Payton
Features
1. Built with Clang 13 + Polly optimize
2. Merge Linux kernel and driver as soon as possible
3. DxT is CAF based and uptodate with latest tag
4. Fixed all compile-time warnings
Other Features
1. kcal, sound gain control
2. CPU OC using some sdm660 frequencies ,[Little cores = 2.0ghz ,Big cores = 2.5ghz]
3. Added & Updated LZ4 for ZRAM (Enabled by Default)
4. AnyKernel3 Installer Script
5.Compiled With Latest Proton CLANG 12
6. Exfat driver comes from arter97
7. Available I/O scheduler: bfq, cfq(default), deadline
8. Available TCP congestion algorithm: westwood(default)
9. Merge some optimization commits from Sultan
10. Kernel-level cpusets parameter optimization, optimize CPU core calls
11. Latest Wireguard driver
12. Adreno GPU boost
13. Some other visible and invisible optimizations...
Due to different moto action implementation on different roms i made two versions
* normal version support roms like superior,pixel experience,msm-xtended,ancient
* L version support roms like LOS,crdroid,havoc,derpest
DOWNLOAD
DxT v4.2
DxT v4.2-L
DxT UC
OTA SUPPORT:
# DxT Kernel FKM Manager Support
This kernel has FKM Manager support for autoflash updates directly from the app.For this to work you must import the configuration link in the section "Flasher" of the app:
Then you must select the option: "Import a kernel download configuration"
This are the URLs for the two versions,just copy,paste and save. (You must add and save one first and if you want both versions available add the other after)
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
Telegram Group
Use the app EXKM, FK Manager, kernel adiutor or smartpack to tweak the kernel!
special thanks to all contributators
attack11, nathanchance , joshuous , akhilnarang , flar2 , kerneltoast , GuaiYiHu , Pzqqt
if u like my works u can donate
[email protected] - upi
https://www.paypal.me/cool585 -paypal
XDA:DevDB Information
DxT kernel, Kernel for the Moto X4
Contributors
dhinesh_cool
Source Code: https://github.com/DhineshCool/Dxt_payton
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v4.2
Created 2020-06-22
Last Updated 2021-07-25
## DxT Changelogs ##
v4.2
*upstreamed to v4.276
*merged latest caf tags
*latest proton clang
*improved cpu frequency
*clean up rarely working freq
*improved cpu idle
*fixed battery drain on idle
*removed prlmk to prevent twrp crash
*more code cleanup fro stability
V4.1
*Fixed battery drain issue
*Fixed some bugs
v4.0
*upstreamed to v4.270
*latest proton clang
*fully rebase
*rework thermal engine
*rework ram-managment
*lot see my git
ota json has been changed
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
v3.6
*upstreamed to v4.258
*latest proton clang
*added anxiety io for faster app opening
*added z3fold from sony
*improved zram performance
*updated ashmem
*fixed some thermal sensor spamming on logcat
*more fixes see my git
v3.5
*upstreamed to v4.253
*Merged tag LA.UM.9.2.r1-02000-SDMxx0.0
*latest proton clang
*Backport new vmalloc for "large performance benefits"
*selinux: Allow audit to be disabled
* page_alloc: double zone's batchsize
*nuke more debloat
*more optimation for better smoothness
now ui will be more smooth
*Updated wireguard to "1.0.20210124"
v3.4
*DxT rebased to caf base
*upstreamed to v4.251
*added persist bug fix
*latest proton clang
*Gpu added 710 freq
*more ion fixes from sultan
*Enable CONFIG_HID_NINTENDO
*Updated wireguard to "1.0.20201221"
v3.3
New Year Release
*upstreamed to v4.248
*latest proton clang
*Gpu oc to 800mhz
*no thermal throttling on gpu
*more ion fixes from sultan
*Updated wireguard to "1.0.20201221"
note uc version pushes to bimonthly release
v3.2
*upstreamed to v4.247
*fix payload calculation
*usb: Add Drivedroid Support
*power: msm-core: Fix mutex not getting unlocked in error path
*cpufreq: stats: optimize proc files
*mm: speed up mremap by 20x on large regions
*work on cpu idle
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clang
**** rework on uc version -it now fully stable no thermal throttling ****
*for the people on xda i released v3.1 on my telegram group , i forget to update on xda
that why directly releasing v3.2
v3.1
*upstream to v4.244
v3.0
*upstreamed to v4.240
*clean up codes
*fixed build warning
*added additional safetynet patch
*rework on thermals
*work on cpu idle
*work on ram managment
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clan
v2.8
*upstreamed to v4.239
*power: bcl: Improve power efficiency of the workqueue
*used latest proton clang (20201010)
v2.7
*upstreamed to v4.238
*qcacld-3.0: Disable Wifi SAE by default
*optimizations for block
*used latest proton clang (20200930)
v2.6
*upstreamed to v4.237
*New OC for payton (thnx to seba3567)
*Remove some scheduler
*ipc logging disabled
*changes on debugfs
*increase thermal trip points
*optimize gpu
*used latest proton clang (20200923)
Reserved
Much appreciated! I've been wanting a custom kernel for Moto x4!
Running on HavocOS 3.6, seemingly no issues. Definitely feels snappier than the base kernel. Will update after a couple days use.
Thanks again!
Installation instructions?
Zohaibzx said:
Installation instructions?
Click to expand...
Click to collapse
Method 1: Download and install the zip for your rom from the download links, then flash in twrp
Method 2: Use Franco Kernel Manager (requires root) and configure it to use the proper link listed under OTA support. FKM will read any new releases in Dhinesh's github, and update the kernel without a need to flash in recovery.
Hope that helps!
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Flashed using fkm in pixel rom. No issues
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
helo123 said:
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
Click to expand...
Click to collapse
U can manually set minimum freq
Zohaibzx said:
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
Click to expand...
Click to collapse
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
dhinesh_cool said:
U can manually set minimum freq
Click to expand...
Click to collapse
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
RBJ26 said:
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Click to expand...
Click to collapse
U need clean flash latest havoc then install
helo123 said:
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
Click to expand...
Click to collapse
Weird I will check ,but lag is due to ram management
I added some tweaks for ram management that was causing lag after sometime for 3gb variant I was aware of this issue I will fix soon
dhinesh_cool said:
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
Click to expand...
Click to collapse
1900-7 Dual Sim 3GB 32GB
dhinesh_cool said:
U need clean flash latest havoc then install
Click to expand...
Click to collapse
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
RBJ26 said:
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
Click to expand...
Click to collapse
Flash through twrp
Or u need root to flash via fk manager
dhinesh_cool said:
Flash through twrp
Or u need root to flash via fk manager
Click to expand...
Click to collapse
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
RBJ26 said:
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
Click to expand...
Click to collapse
On FKM u need to give proper permission to storage then on flasher u need select storage and give access