i Have Lenovo S60-a when i upgrade it to 5.0 then it cause some problem
it load nothing i tried all combinition of button then i tried it through test point and it work it load Qualcomm HS-USB QDLoader 9008 and connected to my pc now when i try to flash it through QFil it give me error
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
And some time it give
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
Hello Everybody. I'm newbie.
Excuse me, I'm confused about log this.
----------------------
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM10)
Connection status: EHCI:HUB:HUB:HUB:USB 2.0 Full-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.0, date: 7-8-2015
Initializing...
MSM Serial number: 0xc26af18c
MSM HW ID: 0x000cc0e1 (SDM636)
OEM Public Key Hash: 0xa7b8b82545a98eca23d6e9105fb464568d1b5828264903441bdef0cd57e3c370
SBL SW version: 3
Firehose: prog_emmc_firehose_Sdm660_ddr.elf
sha1: afa742651b0a11320b25f99297431e8f7514c8f6, size: 653.67 KiB
QC_IMAGE_VERSION: BOOT.XF.1.4-00252-S660LZB-1
IMAGE_VARIANT: Sdm660LA
OEM_IMAGE_VERSION: c3-bsp-builder-job004.bj
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Binary build date: Oct 23 2018 23:32:19
Chip serial num: 0 (0x0)
Sending configurations...
ERROR: Only nop and sig tag can be recevied before authentication.
Handling remote authentication... [SERVER] Failed to sign challenge, error: 5 (client version outdated)
failed
-------------------------------
I'm try remove mi account
Redmi note 5 ( whyred ) MIUI 10.
Thanks for all.
This Guide will explain how to unlock your LG G8X
* Disclaimer*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
*Wait, what? No. Me or somebody else will help you
Click to expand...
Click to collapse
Unlock Prerequisites:
Make sure you have "Enable OEM Unlock" enabled in developer options, along with USB Debugging. Download everything given in the downloads section. Backup EFS using QPST.
How to backup EFS (xqcn) through QPST?
In phone, dial *#546368#*850#, you’ll be in hidden menu now. G
Go to SVC Menu>Port Check Test> Enable Port Check. Connect Phone to PC, select “File transfer” mode in your phone.
Now, open QPST
Click on “Add Ports”
Uncheck “Show Serial and USB/QC Diagnostics ports only”
Choose COM* - USB/Unknown (LGE Mobile USB Serial Port, LMG850.....)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now click OK
Click on “Start Clients”
Choose “Software Download”
Choose Backup, and hit start. This will save the config to xqcn file.
Booting into EDL:
Note: Do while phone is booted, in normal mode.
1. Plug in your Phone to your PC
2. Press and hold Power and Volume Down
3. As soon as your screen is blank, rapidly start pressing volume up.
4. If you've successfully booted into EDL, your screen will be completely blank and the device manager will show (Under COM Ports): Qualcomm HS-USB QDLoader 9008
Now Let’s UNLOCK!!!
Downloads:
QPST: https://drive.google.com/file/d/1qoVGeRSNSIpPHZe811mgqoJJe_1veM52/view?usp=drivesdk
ABL: https://drive.google.com/file/d/1WY6aqb6jf658ji1YRZ1iuDzt2GtH5c2e/view?usp=drivesdk
Firehose: https://drive.google.com/file/d/1oO_0_T6PCHl1SQzFHIeip1R8QDszwfLU/view?usp=drivesdk
1. Launch QFIL
2. Change it to Flat Build, Choose programmer (Firehose), change emmc to UFS from the drown down pane at botton right corner.
3. Click on Tools> Partition Manager
4. BACKUP THEN FLASH.
How to backup?
Choose a partition, right click on it, select “Manage Partition Data”
Now click on “Read Data”, this will backup the partition to {Your username/App data/Roaming/Qualcomm/COM Port* as .bin file so you can flash it back if any problem arises)
Important partitions to backup: modemst1, modemst2 and abl
How to flash?
Choose abl_a, right click on it, select “Manage Partition Data”
Now click on “Load Image”, then browse to abl_a.bin that you have downloaded.
This will flash abl to abl_a, it will show that sending image is completed in logs.
Do the same for abl_b (use abl_a.bin) too
5. Press and hold Vol- and power till it shows No port available in QFIL, then release power button but keep holding vol-
6. You’ll be in fastboot now. (Check device manager, if it’s showing Android with a yellow triange you don’t have drivers for fastboot installed. Google “15 Seconds ADB Installer” and install it.
7. Run the command “fastboot oem unlock”
8. On phone, select “Unlock the bootloader” then press power.
9. Phone is unlocked now, do whatever you want... (Don’t do anything foolish tho...)
Known Issue: FP is broken...
Thanks to Torres (for the file), @Xsavi
Aditya Y, @JohnyCash2020, @[email protected] (For testing)
Will Update this guide with images etc...
You can also ask for help here: https://t.me/LG_G8X_India
Thankyou
How to FIX Network?
1. Boot to edl mode.
2. Open Partition Manager in QFIL, restore backup of abl you created before flashing.
3. Reboot, and network will be back...
THIS IS NOT EDL MODE. (This is Download mode for flashing KDZ, many people are confusing this with EDL)
.
IN EDL MODE SCREEN WILL BE BLANK AND YOUR PHONE WILL BE DETECTED AS Qualcomm HS-USB QDLoader 9008 not LGE AndroidNet Serial...
I am following the unlock tutorial till to "4. If you've successfully booted into EDL, your screen will be completely blank and the device manager will show (Under COM Ports): Qualcomm HS-USB QDLoader 9008" but when I boot into EDL new COM appear (COM11) with state enabled and label "COM11 (auto add)" but I don't see "Qualcomm HS-USB QDLoader 9008"
When after I launch QFIL, I see "No Port Avaiilable"... any help?
diejuse said:
I am following the unlock tutorial till to "4. If you've successfully booted into EDL, your screen will be completely blank and the device manager will show (Under COM Ports): Qualcomm HS-USB QDLoader 9008" but when I boot into EDL new COM appear (COM11) with state enabled and label "COM11 (auto add)" but I don't see "Qualcomm HS-USB QDLoader 9008"
When after I launch QFIL, I see "No Port Avaiilable"... any help?
Click to expand...
Click to collapse
Send a photo of device manager after phone is in edl please...
Hi, thanks for the guide.
A few questions though:
1) Can we relock the bootloader and return it back to the stock state by the appropriate fastboot commands ?
Since FP is not working right now or incase something else goes wrong ?
2) Does this process wipe any data ?
Thanks for the help !
diejuse said:
I am following the unlock tutorial till to "4. If you've successfully booted into EDL, your screen will be completely blank and the device manager will show (Under COM Ports): Qualcomm HS-USB QDLoader 9008" but when I boot into EDL new COM appear (COM11) with state enabled and label "COM11 (auto add)" but I don't see "Qualcomm HS-USB QDLoader 9008"
When after I launch QFIL, I see "No Port Avaiilable"... any help?
Click to expand...
Click to collapse
Send a photo of device manager after phone is in edl please...
camlin said:
Hi, thanks for the guide.
A few questions though:
1) Can we relock the bootloader and return it back to the stock state by the appropriate fastboot commands ?
Since FP is not working right now or incase something else goes wrong ?
2) Does this process wipe any data ?
Thanks for the help !
Click to expand...
Click to collapse
1) Yes.
2)Yes.
Ronith128 said:
Send a photo of device manager after phone is in edl please...
Click to expand...
Click to collapse
I solved the problem, thanks. I have just unlocked the bootloader, no network problem. I am going to try to root now...
diejuse said:
I solved the problem, thanks. I have just unlocked the bootloader, no network problem. I am going to try to root now...
Click to expand...
Click to collapse
Network problem only present in LG G8X released in India ig... Please confirm if fingerprint is working or not plss.
Fingerprint is broken, not working. I have two problems:
1º When the phone starts I get this message: " When start it appears "WARNING: Current version is not available for user. Can't finde matched carrier. Check NT-Code: 0"
2º I have flashed Magisk_Patched.img but I don't see Magisk app and Root Checker app says me the device is not rooted.
diejuse said:
Fingerprint is broken, not working. I have two problems:
1º When the phone starts I get this message: " When start it appears "WARNING: Current version is not available for user. Can't finde matched carrier. Check NT-Code: 0"
2º I have flashed Magisk_Patched.img but I don't see Magisk app and Root Checker app says me the device is not rooted.
Click to expand...
Click to collapse
1) Can’t fix it right now. Because we have two different devices, so I don’t know what’s the problem...
2) Install Magisk Manager..
My phone not show QPST, dont show me com ports, the list are empty
im using lg g8x from Brazil
I have root now but sound is not working. Please help!
SLASH32 said:
My phone not show QPST, dont show me com ports, the list are empty
im using lg g8x from Brazil
Click to expand...
Click to collapse
Are you in edl? Share your Device manager screenshot pls...
Where I can get fastboot drivers for g8x
adb is working fine but when I am running fastboot devices command after getting into fastboot on mobile
nothing is happening and I have installed 15 seconds installer as well but still same problem
please help I stuck between process and with no network
edit
I used different pc and it worked
thanks
So bit of a situation here I followed the guide but now the device is unresponsive. I flashed the Firehose and it still shows in QPST but I am stuck there I don't know how to continue. I cannot find the options you are speaking of.
UPDATE: I got the device to boot but I still don't understand your guide. I'm following best I can
After patching both abl I cannot get the device to boot into fastboot mode? I'm using the correct combination in guide but I am only brought too the splash lg g8x thinq screen and no further. The device won't even boot regularly now..
I've made a backup with QPST. When I boot the phone into EDL mode the driver does not change to the "Qualcomm HS-USB QDLoader 9008" it's still showing as "LGE AndroidNet USB Serial Port (COM4)" and when I try to follow the steps to it fails once I try to open the partition manager.
Here is the log from QFIL
2020-12-04 20:21:08.820 ***** Working Folder:C:\Users\UserName\AppData\Roaming\Qualcomm\QFIL\BHI
2020-12-04 20:21:08.828 Validating Application Configuration
2020-12-04 20:21:08.834 Load APP Configuration
2020-12-04 20:21:08.850 COM:-1
2020-12-04 20:21:08.850 PBLDOWNLOADPROTOCOL:0
2020-12-04 20:21:08.850 PROGRAMMER:True
2020-12-04 20:21:08.850 PROGRAMMERrog_ufs_firehose_sm8150_lge.elf
2020-12-04 20:21:08.850 RESETSAHARASTATEMACHINE:False
2020-12-04 20:21:08.850 SAHARAREADSERIALNO:False
2020-12-04 20:21:08.850 SEARCHPATH:\Users\UserName\Downloads\Android\LG G8x ThinQ\Unlock Bootloader
2020-12-04 20:21:08.850 ACKRAWDATAEVERYNUMPACKETS:False
2020-12-04 20:21:08.850 ACKRAWDATAEVERYNUMPACKETS:100
2020-12-04 20:21:08.850 MAXPAYLOADSIZETOTARGETINBYTES:False
2020-12-04 20:21:08.850 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-04 20:21:08.850 ACTIVEBOOTPARTITION:False
2020-12-04 20:21:08.850 ACTIVEBOOTPARTITION:0
2020-12-04 20:21:08.850 PHYPARTITIONS:False
2020-12-04 20:21:08.850 PHYPARTITIONS:0,1,2,4,5
2020-12-04 20:21:08.850 DEVICETYPE:ufs
2020-12-04 20:21:08.850 PLATFORM:8x26
2020-12-04 20:21:08.850 VALIDATIONMODE:0
2020-12-04 20:21:08.850 RESETAFTERDOWNLOAD:False
2020-12-04 20:21:08.850 SWITCHTOFIREHOSETIMEOUT:30
2020-12-04 20:21:08.850 RESETTIMEOUT:200
2020-12-04 20:21:08.850 RESETDELAYTIME:2
2020-12-04 20:21:08.850 METABUILD:
2020-12-04 20:21:08.850 METABUILD:
2020-12-04 20:21:08.850 FLATBUILDPATH:C:\
2020-12-04 20:21:08.850 FLATBUILDFORCEOVERRIDE:True
2020-12-04 20:21:08.850 QCNPATH:C:\Temp\00000000.qcn
2020-12-04 20:21:08.851 QCNAUTOBACKUPRESTORE:False
2020-12-04 20:21:08.851 SPCCODE:000000
2020-12-04 20:21:08.851 ENABLEMULTISIM:False
2020-12-04 20:21:08.851 AUTOPRESERVEPARTITIONS:False
2020-12-04 20:21:08.851 PARTITIONPRESERVEMODE:0
2020-12-04 20:21:08.851 PRESERVEDPARTITIONS:0
2020-12-04 20:21:08.851 PRESERVEDPARTITIONS:
2020-12-04 20:21:08.851 ERASEALL:False
2020-12-04 20:21:08.851 Load ARG Configuration
2020-12-04 20:21:08.885 Validating Download Configuration
2020-12-04 20:21:08.886 Image Search Path: D:\Users\UserName\Downloads\Android\LG G8x ThinQ\Unlock Bootloader
2020-12-04 20:21:08.888 Programmer Path:\Users\UserName\Downloads\Android\LG G8x ThinQ\Unlock Bootloader\prog_ufs_firehose_sm8150_lge.elf
2020-12-04 20:21:09.109 Process Index:0
2020-12-04 20:21:09.124 Qualcomm Flash Image Loader (QFIL) 2.0.3.5
2020-12-04 20:24:30.396 Start Download
2020-12-04 20:24:30.399 COM Port number:4
2020-12-04 20:24:30.409 Switch To EDL
2020-12-04 20:24:34.623 Switch To EDL Fail Failed to Switch to Emergency Download mode
Click to expand...
Click to collapse
jlharmon001 said:
I've made a backup with QPST. When I boot the phone into EDL mode the driver does not change to the "Qualcomm HS-USB QDLoader 9008" it's still showing as "LGE AndroidNet USB Serial Port (COM4)" and when I try to follow the steps to it fails once I try to open the partition manager.
Here is the log from QFIL
Click to expand...
Click to collapse
you are not getting into edl mode
try again as said to get into edl
it may take 3 to 4 tries
Hi everyone!
Just wanted to share some steps in case you brick your Realme.
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY DAMAGES
Some prerequisites you will need:
mtkclient + python
spft (sp flash tool)
ofp extractor
Your stock rom in OFP format.
Step 1. Download all of the things mentioned above.
Step 1a. Make sure your device is turned off. DO NOT PLUG IT IN.
Step 2. Install mtkclient using the guide on GitHub.
Step 3. Run
Bash:
$ py mtk payload
in your terminal.
Step 3a. When it says ***waiting for device*** hold both volume buttons and plug in your device.
This will enter BROM mode.
Step 4. Extract and open ofp extractor and extract your ofp.
Step 5. Open SPFT and click DOWNLOAD ONLY (do not I MEAN DO NOT PRESS FORMAT ALL.)
Step 6. In scatter, look for your scatter file. It should be (MTxxxxScatter.txt etc) Then select it.
Step 7. Select your auth file if you have one.
Step 8. Press Download and if the progress bar starts going the flash is going. DO NOT UNPLUG.
Step 9. Reboot after it says 'Download Ok'
Step 10. Enjoy your unbricked device!
NOTE In most cases the rom will be for android 10. Update if required through OZIP.
I cannot download with SPFlash. Error 0xC0060001. I'm sure that I have done all steps correctly including this tutorial:
Realme 7 Unbrick
Of corse I'm doing everything with Realme 7 5G RMX2111EU.
I had problems with disabling protection as follows but I think it finally succeeded.
1. bypass_utility-v.1.4.2 gives error
Code:
[2022-05-10 22:53:51.684562] Waiting for device
[2022-05-10 22:53:59.780976] Found port = COM4
[2022-05-10 22:53:59.921376] Device hw code: 0x996
[2022-05-10 22:53:59.921376] Device hw sub code: 0x8a00
[2022-05-10 22:53:59.921376] Device hw version: 0xca00
[2022-05-10 22:53:59.921376] Device sw version: 0x0
[2022-05-10 22:53:59.921376] Device secure boot: True
[2022-05-10 22:53:59.921376] Device serial link authorization: False
[2022-05-10 22:53:59.921376] Device download agent authorization: True
[2022-05-10 22:53:59.921376] Disabling watchdog timer
[2022-05-10 22:53:59.936976] Disabling protection
[Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win
error: A device attached to the system is not functioning.\r\n\n'
[2022-05-10 22:54:01.028978] Payload did not reply
Press any key to continue . . .
2. mtk-client gives error:
Code:
....Preloader
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
Preloader
3. MTK Meta Utility v37 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
DriverName : MediaTek USB Port_V1633
DriverPath : usb\vid_0e8d&pid_0003\5&278a3c80&0&2
DriverID : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
InfPath : oem28.inf
ProviderName : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● Identifier Dimensity 720/800U 5G
● Info 8A00_CA00_0000_Mouton
● MEID:3EFFEA531AB22A57AB0240D8421E92B4
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
4. MTK Auth Byoass Tool v6.0.0.1 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
Sync with bootrom started...
● Chipset MT6853:Dimensity 720/800U 5G
● Code Mouton
● Hw Sub 8A00
● HW Ver CA00
● SW Ver 0000
● SecCFG SBC+SDA
Disable brom protection.
Bypass Payload ACK = 0xa1a2a3a4
MTK Secure Boot Bypasss success!
now you can use SP Flash Tool or any MTK Tool
czaroslaw said:
I cannot download with SPFlash. Error 0xC0060001. I'm sure that I have done all steps correctly including this tutorial:
Realme 7 Unbrick
Of corse I'm doing everything with Realme 7 5G RMX2111EU.
I had problems with disabling protection as follows but I think it finally succeeded.
1. bypass_utility-v.1.4.2 gives error
Code:
[2022-05-10 22:53:51.684562] Waiting for device
[2022-05-10 22:53:59.780976] Found port = COM4
[2022-05-10 22:53:59.921376] Device hw code: 0x996
[2022-05-10 22:53:59.921376] Device hw sub code: 0x8a00
[2022-05-10 22:53:59.921376] Device hw version: 0xca00
[2022-05-10 22:53:59.921376] Device sw version: 0x0
[2022-05-10 22:53:59.921376] Device secure boot: True
[2022-05-10 22:53:59.921376] Device serial link authorization: False
[2022-05-10 22:53:59.921376] Device download agent authorization: True
[2022-05-10 22:53:59.921376] Disabling watchdog timer
[2022-05-10 22:53:59.936976] Disabling protection
[Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win
error: A device attached to the system is not functioning.\r\n\n'
[2022-05-10 22:54:01.028978] Payload did not reply
Press any key to continue . . .
2. mtk-client gives error:
Code:
....Preloader
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
Preloader
3. MTK Meta Utility v37 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
DriverName : MediaTek USB Port_V1633
DriverPath : usb\vid_0e8d&pid_0003\5&278a3c80&0&2
DriverID : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
InfPath : oem28.inf
ProviderName : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● Identifier Dimensity 720/800U 5G
● Info 8A00_CA00_0000_Mouton
● MEID:3EFFEA531AB22A57AB0240D8421E92B4
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
4. MTK Auth Byoass Tool v6.0.0.1 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
Sync with bootrom started...
● Chipset MT6853:Dimensity 720/800U 5G
● Code Mouton
● Hw Sub 8A00
● HW Ver CA00
● SW Ver 0000
● SecCFG SBC+SDA
Disable brom protection.
Bypass Payload ACK = 0xa1a2a3a4
MTK Secure Boot Bypasss success!
now you can use SP Flash Tool or any MYKI Tool
Click to expand...
Click to collapse
What more.info about the error code do you have? Also are you on windows because spft buggy on linux
BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Windows 7
SP_Flash_Tool_v5.2208_Win
czaroslaw said:
BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Windows 7
SP_Flash_Tool_v5.2208_Win
Click to expand...
Click to collapse
Then you haven't bypassed brom, try mtkclient again and don't unplug your device
Mtk client gives error: Preloader - [LIB]: ←[31mStatus: Handshake failed
Install mtk drivers and Libusb, also pyserial
All above mentioned was installed. I tried different pack from droidwin and I get this:
Code:
Port - Device detected :)
Preloader - CPU: MT6853(Dimensity 720 5G)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x996
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID: 3EFFEA531AB22A57AB0240D8421E92B4
Preloader - SOC_ID: DAA82CB9D5E03916132A0BE2A479C0CC0FFD2B10
1E00173F9EA9FCB44C88FC8E
PLTools - Loading payload from mt6853_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: D:\Apk\MTK Bypass Tools\mtkclient-main\mtkc
lient\payloads\mt6853_payload.bin
Be sure to use in SPFT, in connection check USB full speed, and in general settings, uncheck the options Check LIB DA Match and Storage Life Cycle Check.
If this doesn't work, try to flash only preloader firstly, and then flash the rest, upload some screenshot if the error persists.
That means it worked
Ok. Bootloader is unlocked but now I have dm-verity corrupted.
I cannot enter recovery mode. Some error flashes on screen and immediately reboot. I cannot even read this. I have found that it might be:
the serial is not matched
fastboot_unlock_verify failed
I cannot enter fastboot mode. It gives:
Orange state
The device is unlocked and cannot be trusted
and then restarts
Normal boot gives:
dm_varity corruption
Your device is corrupted
It won't be trusted and may not work properly
Press power button to continue
Then pressing power button boots into system correctly and the phone is working.
How to get rid of these errors? How to recover access to recovery and fastboot mode? Should I flash some partitions again from stock formware?
Should I install PBRP using mtkclient as in this guide?
Install TWRP Recovery without using Fastboot Mode [MediaTek]
And then should I root it using patched Magisk as follows?
Root MediaTek Devices without using Fastboot Mode [via MTK Client]
There is some info about patched version of Magisk for MTK devices. Should I use it?
do
Code:
fastboot flash --disable-verity --disable-verification vbmeta {your vbmeta.img}
czaroslaw said:
Ok. Bootloader is unlocked but now I have dm-verity corrupted.
I cannot enter recovery mode. Some error flashes on screen and immediately reboot. I cannot even read this. I have found that it might be:
the serial is not matched
fastboot_unlock_verify failed
I cannot enter fastboot mode. It gives:
Orange state
The device is unlocked and cannot be trusted
and then restarts
Normal boot gives:
dm_varity corruption
Your device is corrupted
It won't be trusted and may not work properly
Press power button to continue
Then pressing power button boots into system correctly and the phone is working.
How to get rid of these errors? How to recover access to recovery and fastboot mode? Should I flash some partitions again from stock formware?
Should I install PBRP using mtkclient as in this guide?
Install TWRP Recovery without using Fastboot Mode [MediaTek]
And then should I root it using patched Magisk as follows?
Root MediaTek Devices without using Fastboot Mode [via MTK Client]
There is some info about patched version of Magisk for MTK devices. Should I use it?
Click to expand...
Click to collapse
If it says DM-verity error, reflash with spft and on mtkclient, relock BL by using
Code:
Py mtk da seccfg lock
I cannot enter fastboot mode so I cannot use fastboot flash.
Second advice: I do not want to lock bootloader.
If you are able to boot to stock, do ADB reboot fastboot
Does not work. It gives the same as VolUP+PWR. Orange state message and reboot.
I cannot enter fastboot in any way.
Should I flash something in brom mode? Recovery partition? Something else to get rid of dm_varity?
Reflash firmware then try, idk this hasn't happened to me
Also send the link of the firmware U got
I have RMX2111_11_C.11. Updated via OTA. I cannot find such version firmware file.
The newest I found is:
RMX2111GDPR_11_C.09 EDL mode
czaroslaw said:
I have RMX2111_11_C.11. Updated via OTA. I cannot find such version firmware file.
The newest I found is:
RMX2111GDPR_11_C.09 EDL mode
Click to expand...
Click to collapse
Relock bootloader and try using this to reunlock bl