Tanix TX3 Max - Wifi cannot be enabled - Android Stick & Console AMLogic based Computers

Hello.
The thread title is self-explanatory. I tried restoring stock firmware, also tried third party firmware (atvexperience). Wifi cannot be enabled.
The wifi adapter itself does not seem to have an issue. I have tried it in LibreElec and it works fine. The problem occurs only in Android.
Any help would be appreciated.

Related

[Q] [Help] xperia active WLAN broken, related to flashing?

Hi everybody,
have recently flashed my xperia active st17i from factory 0.69 down to 0.42.
After that, wanted to reinstall my apps and tried to enable wlan to save data rate, but to no avail. WLAN support is broken, phone info does not even show a MAC listed for the wlan interface. Also usb debug log attached shows errors related to the wlan adapter.
I think the firmware ST17i_4.0.2.A.0.42_GenericCE.ftf used was correct one (CRC 99F2E719).
I'm not 100% sure it is related to flashing; might have also broke some time ago (I know it was working when the phone was new, but didn't use WLAN recently).
Is there any wlan radio related part involved in flashing which might need correction?
Also flashed new ICS using SEUS but shows the same effect, no WLAN connection possible (no mac either).
Anybody got a clue?
Any help is appreciated,
ergalm

USB Tethering greyed out. Kernel Problems?

Hi,
I'm wondering if anyone could help?
My device is a HTC Desire 620, single sim (a31lu).
I have managed to install a custom recovery, root, and flash lollipop using Patrik.KT's build (the only available custom ROM for this particular device).
When my phone is on it's stock firmware, (KK 4.4, Sense 6, I believe), USB tethering works flawlessly with my Asus rt56u, and I'm able to share my internet connection.
When I'm on Lollipop, the USB tethering option stays greyed out and it fails to connect. I've tried it on a PC, and it recognises the device, but it then makes the sound as if I have removed the USB cable.
I have tried modifying the build.prop for net.provisioning and the settings for settings.db for tethering_dun_required=0 that are available anywhere on the interweb, to no avail.
Could this be a kernel problem? I've had this happen on an old S3 and a change of kernel was able to resolve the issue, but there are no kernels available for this phone.
Could anyone please help?
Many thanks.
Is anyone able to help at all?

M92s Plus firmware that supports AP6335 WIFI chipset

Hi,
Can anyone help me find the correct firmware for my android box please?
I've for a S912 based M92S Plus but after using it on etherernet for sometime i tried to use the WIFI and noticed its not working, you cannot enable the WIFI from the box, or bluetooth.
I factory reset the box but to no avail so I flashed the box with the firmware below:
http://blog.geekbuying.com/2017/05/m92s-plus-android-7-1-1-4k-hdr-tv-box-firmware-20170527/
The problem remains and I think its because of the WIFI chipset I have on my box. The only firmwares I can find online for this box are for the WIFI chipset AP6330 where my box has the AP6355 chipset.
Anyone seen the correct firmware or know how I can install the drivers for a different WIFI chipse?

[Letv Le Max 2] Stuck in Headset Mode / USB-C file transfert not working

Hello,
I have a small problem concerning the USB-C port.
After connecting my bluetooth earphones, the terminal was stuck in headset mode. I tried to format data, to install again the rom, I made a factory reset, I tried different rom AOSP ... nothing
When I connect wired headphones, the sound works but when I disconnect them no sound works (phone calls and media for speakers or earpiece). I know the earpiece and loudspeaker are working because I tried SoundAbout under android 7.1.0, but this application does not work with android 8.1.0 or 9.0-Alpha
File transfer does not work either, but when I connect my device fastboot, adb recognizes it, when I connect it via android, only charge works.
I think the problem is related to the USB-C port, I cleaned it but it does not change anything ...
Maybe there is another solution that I have not explored yet ...
Thank you for your help.
Best regards
(sorry for my english)
Max.
The Max 2 X829 (treblized)
Android 9.0 alpha (AospExtended-v6.0-x2-20180908-1833-ALPHA)
Hi,
I downgraded to Android 8.1.0 [AOSPExtended [treble] V5.7-official] then I rebooted the system with the charging cable plugged and the sound came back ... weird :cyclops:
But If I reboot without the charging cable, the terminal stays into headset mode...
Data still not working
I don't know why ?
Someone get an idea ? What is the problem ? Any solution ?
thanks
Hello
sorry for a bit of necro
I also have the problem.
I use Audio Router from playstore which works like Sound About but is compatible with 8+ Android.
I also have problems that appeared all of a sudden at the same time:
- same faulty sound behaviour
- usb mtp/adb not available (under recovery and under Android)
- It also seems that my battery will not charge as fast as before though Quick charge is enabled.
pluging/unpluging will not bring the notification to modify the usb link behaviour.
I also tried enabling/disabling usb debugging options...
This happened after trying/flashing many roms so I don't really know which one would have caused evil :/
Do any treble rom could harm the device like this by altering the vendor partition or has it nothing to do with it ?
about usb under pie roms :
The options are greyed under Usb Preferences.
In developer mode, changing the default usb behaviour does nothing.
I have tried 2 USB C cables.
Both are working with my X820 only in bootloader mode.
And both are working fully with my second LeEco (x525).
So i don't think the cables are faulty.
And as it is working also in bootloader mode I suspect there is some lockdown somewhere hidden in my partitions.
But I can't find anything.
I also fully restored the X820 to stock and the problem remains.
under eui roms :
Same problem
No usb configuration available
If anybody could help that would be awesome.
thanks in advance
I would recommend you to reflesh phone with qfil.
kihope12 said:
I would recommend you to reflesh phone with qfil.
Click to expand...
Click to collapse
Thanks for replying.
I have already done that (full qualcomm reflash with FlashOne & QFil image).
The problem still occurs.
This is very strange behaviour...
The phone is pretty new and I did not make it fall or whatever missuse.
The usb-c is still working in FastBoot Mode (but not mtp/usb file transfer nor usb debugging/Adb) and I can still charge the phone when not using it.
And about the audio problem it can be fixed with an app (audio router/sound about/...) so I am pretty sure it is pure software issue but I can't find any more information about this.
Is there any other system internal partition or else that is not flashed with every rom (other than vendor) and that could be different amongst the x82x devices ?
I have also tried flashing some modem files (not all) maybe this can be linked to this problem ?
Thanks
sirnonox said:
Thanks for replying.
I have already done that (full qualcomm reflash with FlashOne & QFil image).
The problem still occurs.
This is very strange behaviour...
The phone is pretty new and I did not make it fall or whatever missuse.
The usb-c is still working in FastBoot Mode (but not mtp/usb file transfer nor usb debugging/Adb) and I can still charge the phone when not using it.
And about the audio problem it can be fixed with an app (audio router/sound about/...) so I am pretty sure it is pure software issue but I can't find any more information about this.
Is there any other system internal partition or else that is not flashed with every rom (other than vendor) and that could be different amongst the x82x devices ?
I have also tried flashing some modem files (not all) maybe this can be linked to this problem ?
Thanks
Click to expand...
Click to collapse
It looks like software, when does it stoped
working?
kihope12 said:
It looks like software, when does it stoped
working?
Click to expand...
Click to collapse
I am not really sure because I installed many roms for geekly testing purpose
And I can't remember exactly since when It happened...
I ordered my phone from China so I got a chinese eui and modem version but I don't remember which modem version it was...
though I am not sure it can be important or not here...
Currently I went back to SmallEui by Aurel.
This sound exactly like the problem I have.
I am sure it is not hardware related. I even replaced the usb port/flex cable.i don't know which ROM brought me to this stage. Maybe it was linage 15.1, build 20181201, but I don't think it's linage's fault. Because flashing an other ROM doesn't help.
Is there any partition that is not touched by flashing qfil zip file?
Maybe someone can provide twrp backup of all partitions that are reachable by twrp. Hopefully we can find the wrong part this way.
Regards
Jo
So yesterday I flashed again with qualcomm qfil (2 or 3 times) and I finally got back the audio, usb (debugging, mtp and charge).
I do not understand why but the at 1st attempt the audio problem was still here
at the second attempt the audio problem disappeared but my internal storage went partitioned down from 64 Gb to 16 GB
and finally at the third attempt It worked though I had to perform a final factory Reset from Android Settings because the internal storage was filled up to 50 Gb with leeco default garbage....
Everything looked good then and I was happy at last!
But then today suddenly it stopped working again...
I don't know what exactly is in cause...
since yesterday
- I played around with the usb-c / jack audio adapter
- I restored my apps
- I plugged the phone in another usb-c power cable (with magnet pin)
I will try again to fully restore and see what exactly is in cause of the problem...
The other Usb-C seems to be problematic though I am not sure it is the only one to possibly cause the issue....

Problem with kii pro S905D tuner

Hello! I have kii pro s905d. I did an update some days ago and after the update I can not access dtv app. It says “can not detect any demod/tuner” I flashed the box with usb method, using above firmware (img file) by usb cable and it was successfully but dtv still doesn’t worked.
I have done reset factory, updated from the sd, from usb but still the same. I can not ust dtv now. I cleared the cache of dtv, force stopped and still doesnt work.
Can you help me?

Categories

Resources