Storsec.mbn error when flashing in edl mode - Xiaomi Redmi Note 5 / 5 Plus Questions & Answers

My phone is stuck in edl mode for no reason. I am facing the following error when I flash my phone. Can someone tell me what's wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Got same problem with my bricked redmi note 5 (MET7S). Couldn't find any solution. Any assistance will be highly appreciated. Thanks

Sukhdev channi said:
Got same problem with my bricked redmi note 5 (MET7S). Couldn't find any solution. Any assistance will be highly appreciated. Thanks
Click to expand...
Click to collapse
Still found no solution but I have a feeling that something is broken in the motherboard. In my case I think it's the emmc chip because I see storage related errors when I flash.
I might just have to sell the phone parts and buy a new phone. :crying:

It's not the motherboard issue, it's just that your partition has been corrupted and flash tool is unable to send program to your device, I would suggest you to try emmcdl and try to flash from there.

naveen008 said:
It's not the motherboard issue, it's just that your partition has been corrupted and flash tool is unable to send program to your device, I would suggest you to try emmcdl and try to flash from there.
Click to expand...
Click to collapse
Thanks bro. But how to use emmcdl for this phone? Mind giving some instructions?

mih8r said:
Thanks bro. But how to use emmcdl for this phone? Mind giving some instructions?
Click to expand...
Click to collapse
Please use below link for download and instructions.
https://pin.it/6SjCY4C
Let me know if you need any other help.
Thanks

mih8r said:
My phone is stuck in edl mode for no reason. I am facing the following error when I flash my phone. Can someone tell me what's wrong?
Click to expand...
Click to collapse
Did you find any solution? I have been facing the same issue for the last couple of days.

I am also running into a similar issue where I believe I am stuck in EDL. I flash and when it tries to "ping target via firehose" it times out. I am not sure what to do.
Currently my phone doesn't show any boot up screen. When the battery is plugged in and the phone is plugged in the notification light flashes constantly. Not sure what caused it to brick either. It just one day stopped working.

R3B0rnX said:
I am also running into a similar issue where I believe I am stuck in EDL. I flash and when it tries to "ping target via firehose" it times out. I am not sure what to do.
Currently my phone doesn't show any boot up screen. When the battery is plugged in and the phone is plugged in the notification light flashes constantly. Not sure what caused it to brick either. It just one day stopped working.
Click to expand...
Click to collapse
Did you try the test point method?

mujtahid.akon said:
Did you try the test point method?
Click to expand...
Click to collapse
same issue cant solve any solution?

Related

[Q]Phone issue with Odin and Heimdall

Hi! I have used these forums in the past while playing with my Samsung Galaxy Fascinate(T959D).
My issue is that no matter what cord I use to try and get a rom or recovery onto my phone right now Odin either "hangs" or it "fails" and Heimdall can't find the phone at all even after using the driver program that it comes with.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
[/URL][/IMG]
I have a "jig" that forces the phone into download mode so getting into download mode is no issue. A couple times when I have tried to use Odin on the phone it has come up with something like "Failed to re-partition"....
Any help would be greatly appreciated as I am trying to get this phone going for my sister who has 4 kids. (Her last Android her youngest got mad at her and threw it in the toilet)
Thank YOu Ragn
Ragn said:
Hi! I have used these forums in the past while playing with my Samsung Galaxy Fascinate(T959D).
My issue is that no matter what cord I use to try and get a rom or recovery onto my phone right now Odin either "hangs" or it "fails" and Heimdall can't find the phone at all even after using the driver program that it comes with.
[/URL][/IMG]
[/URL][/IMG]
I have a "jig" that forces the phone into download mode so getting into download mode is no issue. A couple times when I have tried to use Odin on the phone it has come up with something like "Failed to re-partition"....
Any help would be greatly appreciated as I am trying to get this phone going for my sister who has 4 kids. (Her last Android her youngest got mad at her and threw it in the toilet)
Thank YOu Ragn
Click to expand...
Click to collapse
What is it that you are trying to do exactly? Do you have the correct samsung drivers? Are you pulling the battery out as well? Normally the phone part of Odin is not used, it's like a no no, but I guess it depends on what you are trying to do.
netlagger said:
What is it that you are trying to do exactly? Do you have the correct samsung drivers? Are you pulling the battery out as well? Normally the phone part of Odin is not used, it's like a no no, but I guess it depends on what you are trying to do.
Click to expand...
Click to collapse
I am putting firmware and everything back on the phone. The system, boot, data, datadata etc I guess all got formatted. Yes I am pulling out the battery.

[Q] Cubot GT72E - bricked (I have backup)

Hello dear friends,
The phone was using by my uncle and It don't have Turkish language opion.
I made a backup on MTK Droid Tools(The phone has MTK6572), later i tried to flash stock rom.
Rom made phone hard brick directly, I'm trying to flash my backup but flashtool says "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)".
So, what should i do for this phone?
Can anyone help me?
mehmetcanekinci said:
Hello dear friends,
The phone was using by my uncle and It don't have Turkish language opion.
I made a backup on MTK Droid Tools(The phone has MTK6572), later i tried to flash stock rom.
Rom made phone hard brick directly, I'm trying to flash my backup but flashtool says "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)".
So, what should i do for this phone?
Can anyone help me?
Click to expand...
Click to collapse
First try To format the Flash from SPflash tools..
But don't. Format the Bootloader.
Then download the backed up rom..
abhinavp649 said:
First try To format the Flash from SPflash tools..
But don't. Format the Bootloader.
Then download the backed up rom..
Click to expand...
Click to collapse
When i try make format, this error shown;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mehmetcanekinci said:
When i try make format, this error shown;
Click to expand...
Click to collapse
Are you flashing your phone with battery or without battery..
Try pressing volume + or volume - while starting download.
Probably the error is occurred because the files are not matching with your device.
abhinavp649 said:
Are you flashing your phone with battery or without battery..
Try pressing volume + or volume - while starting download.
Probably the error is occurred because the files are not matching with your device.
Click to expand...
Click to collapse
I tried with battery&without battery, still same, I tried with + and - button and both of them with and without battery but still same, really i don't know what should i do. This phone belongs my uncle and I broke it, he is too angry to me, I really need your help
mehmetcanekinci said:
I tried with battery&without battery, still same, I tried with + and - button and both of them with and without battery but still same, really i don't know what should i do. This phone belongs my uncle and I broke it, he is too angry to me, I really need your help
Click to expand...
Click to collapse
refer to this link: http://www.techulk.com/2014/01/sp-tools-dram-error-fixed-finally-heya.html
it contains the fix for the issue u r facing.
cheers!

Redmi Note 4X Bootloop, tried everything.

Hello there,
My brother had a Redmi note 4X from last 2-3 years. One fine morning it decided to die and wouldn't start. So i took it upon myself to revive it (as i have the experience with Roms, flashing etc.).
First i tried the usual solutions i.e, MiFlash, but i came to know the bootloader is locked. Then i switched to EDL mode (Testpoint) and successfully flashed the Fastboot Rom (MIUI 8, MIUI10) but the phone wouldn't start, stuck on MI logo or bootloop.
Then i searched here and came across QFIL tool. First i got Sahara errors, searched for the solutions and came to know that you have to press the Download button ASAP after you connect EDL mode. Solved the Sahara error, Rom started to flash but suddenly it showed ' Process Failed: Attempted to divide by zero '.
Tried again, same error. Now whenever i process reaches to flash my ' Userdata.img ', it shows Attempted to divide by zero error. Everything else works fine, the drivers are good, the files are good, tried different fastboot roms, but when it comes to flash userdata.img, it shows error and fails.
while it gets successfully flasheflashed in MiFlash (but bootloop).
Now it doesnt seem to have any solution left (i couldnt find). so i have resorted to post it here.
It would be a great help if anything helpful is posted here.
Regards.
Have you choosen "clean all" during MiFlash?
If not use clean all option.
Remember also to put ROM in short named catalog inside of systemroot drive like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
have tried everything, it flashes in MiFlash but with bootloop.
And in QFIL, it flashes with userdata.img error.
nothing else works.
cybercracker` said:
have tried everything, it flashes in MiFlash but with bootloop.
And in QFIL, it flashes with userdata.img error.
nothing else works.
Click to expand...
Click to collapse
It's hardware problem, probably emmc broken
zoel.fahmi said:
It's hardware problem, probably emmc broken
Click to expand...
Click to collapse
so no chance of getting it sorted out ?
cybercracker` said:
so no chance of getting it sorted out ?
Click to expand...
Click to collapse
You can, if you can find another emmc or a note 4x with broken screen selling for parts
cybercracker` said:
have tried everything, it flashes in MiFlash but with bootloop.
And in QFIL, it flashes with userdata.img error.
nothing else works.
Click to expand...
Click to collapse
Use QPST version 2.7.438.3 (Google it), anything below and you get userdata write error

Question Anyone know how to fix a boot loop issue?

Anyone know how to fix a boot loop issue? Looks like my smartphone decided to go into a boot loop. My Realme GT2 Pro isn't seen by my PC in this state.
Soft-brick or hard-brick? Can you access the bootloader? Do you have ABD drivers on your PC?
I don't know the difference between a soft brick and hard brick. It starts to boot and recycles. I can manage only to get into this strange recovery mode. I tried all 3 options you see on the screen and there is no difference.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://imgur.com/DE0nePX
It's soft-bricked... it's easy to fix... But do you flashed the phone or just started bootlooping all of nothing?
It just started this yesterday for no reason. I was deleting some apps I don't use when it started.
How can I fix this when the device can't be seen by the PC?
Since you said that tried all three options from Recovery mode means that there's no more data to recover... So, just re-flash the phone... You'll need the ADB drivers for the PC to recognize the phone on bootloader...
I managed to get the phone into a condition where it is recognized by a qualcomm QDLoader. Where do I go from here?
This is EDL mode... This is for severe cases, which is not yours, for now... Is your phone unlocked?
I think the phone is unlocked right now
No fastboot available so how do I flash an image in EDL mode?
Are you sure you doesn't have access to bootloader? Start the phone with the power button + volume down...
Anyway, in EDL mode you can flash your phone with QFIL, but it's very buggy... Or with MSM Download Tool, which is flawless, but the problem is getting access to this software... That was my problem until today as you can see here...
MSM Downloaf Tool for realme GT 2 Pro
Does anyone know how to access this tool? This is ridiculous, realme has no useful tool to flash their phones and the one that is useful are impossible to access... The only one that I have access was one patched for some especific Oppo phone...
forum.xda-developers.com
I guess I'm willing to pay to have this resolved or return for a refund
I paid a small fee and this was resolved
robert3892 said:
I paid a small fee and this was resolved
Click to expand...
Click to collapse
the solution is change slot
aaronisaacm said:
the solution is change slot
Click to expand...
Click to collapse
Change slot?

Stuck on bootloader, unable to enter recovery

Appreciate anyone who can help! I was tooling around trying to unlock my AT&T locked SD1 but was basically unable to get it working. So I decided to undo everything with a factory reset and relock the bootloader...and that's when I bricked my device.
I am unable to go past the bootloader screen and unable to either Start the device or enter Recovery Mode.
Not sure how else to proceed.
So, is the bootloader currently locked?
Does fastboot flashing unlock work?
Renate said:
So, is the bootloader currently locked?
Does fastboot flashing unlock work?
Click to expand...
Click to collapse
Unfortunately, no. Adb is no longer recognising the device and I'm stuck in boot select screen unable to even Start or enter Recovery Mode.
Bootloader is currently locked.
Not that it does a lot of good, but you can see fastboot?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I see.
I think you are out of luck until the firehose programer for the DUO out. I got the same device like this. Maybe boot.img is broken for the device, or recovery partition got messed up. Basically the device have to restore from the ground up.
Sadly MSFT does not provide a restore solution other than the recovery image which the device have to enter the recovery mode at least.
JimmyRespawn said:
I think you are out of luck until the firehose programer for the DUO out. I got the same device like this. Maybe boot.img is broken for the device, or recovery partition got messed up. Basically the device have to restore from the ground up.
Sadly MSFT does not provide a restore solution other than the recovery image which the device have to enter the recovery mode at least.
Click to expand...
Click to collapse
I was worried you'd say something like that. Down in the dumps.
May be this can help you?
https://www.reddit.com/r/surfaceduo/comments/wn5joi
Sharkam said:
May be this can help you?
https://www.reddit.com/r/surfaceduo/comments/wn5joi
Click to expand...
Click to collapse
What in the name of all things holy?! Man, I'm gonna have to look deep into this and figure it out. Problem is, I am not nearly as smart as that guy which is itself gonna be a huge challenge. That said, I do have all the patched imgs on my desktop...so perhaps there is a way back. IF I can figure out the process as laid out here.
Thanks for this pal at least it helps.
im here with you i need bootimg from 2022.823.41 ota went threw now stuck.. im on the duo 2
This is the duo 1 forum.
There is a duo 2 forum, but it is less active.
did u tryed
`fastboot reboot recovery`
yes .. it just falls back to bl .. I need the boot.img from 2022.823.41 update . I tried to capture the link but it flashed before I told it.
this is the duo2 btw
Me too I have the same issue. Did you found how to fix it ?

Categories

Resources