Hello there,
My brother had a Redmi note 4X from last 2-3 years. One fine morning it decided to die and wouldn't start. So i took it upon myself to revive it (as i have the experience with Roms, flashing etc.).
First i tried the usual solutions i.e, MiFlash, but i came to know the bootloader is locked. Then i switched to EDL mode (Testpoint) and successfully flashed the Fastboot Rom (MIUI 8, MIUI10) but the phone wouldn't start, stuck on MI logo or bootloop.
Then i searched here and came across QFIL tool. First i got Sahara errors, searched for the solutions and came to know that you have to press the Download button ASAP after you connect EDL mode. Solved the Sahara error, Rom started to flash but suddenly it showed ' Process Failed: Attempted to divide by zero '.
Tried again, same error. Now whenever i process reaches to flash my ' Userdata.img ', it shows Attempted to divide by zero error. Everything else works fine, the drivers are good, the files are good, tried different fastboot roms, but when it comes to flash userdata.img, it shows error and fails.
while it gets successfully flasheflashed in MiFlash (but bootloop).
Now it doesnt seem to have any solution left (i couldnt find). so i have resorted to post it here.
It would be a great help if anything helpful is posted here.
Regards.
Have you choosen "clean all" during MiFlash?
If not use clean all option.
Remember also to put ROM in short named catalog inside of systemroot drive like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
have tried everything, it flashes in MiFlash but with bootloop.
And in QFIL, it flashes with userdata.img error.
nothing else works.
cybercracker` said:
have tried everything, it flashes in MiFlash but with bootloop.
And in QFIL, it flashes with userdata.img error.
nothing else works.
Click to expand...
Click to collapse
It's hardware problem, probably emmc broken
zoel.fahmi said:
It's hardware problem, probably emmc broken
Click to expand...
Click to collapse
so no chance of getting it sorted out ?
cybercracker` said:
so no chance of getting it sorted out ?
Click to expand...
Click to collapse
You can, if you can find another emmc or a note 4x with broken screen selling for parts
cybercracker` said:
have tried everything, it flashes in MiFlash but with bootloop.
And in QFIL, it flashes with userdata.img error.
nothing else works.
Click to expand...
Click to collapse
Use QPST version 2.7.438.3 (Google it), anything below and you get userdata write error
Related
Hello,
i'm new in the forum, i have problem with Meizu M6 Note M721H because i have installed twrp recovery with app crack (3.2.1) and next i have deleted SO (flyme firmware) and i have cleaned the phone, after i have updated twrp to 3.2.2-0 version and after reboot, after 1-2 seconds of meizu logo the screen becomes black and the twrp doesn't start....and i haven't firmware installed...fastboot mode working but i haven't permissions because bootloader is locked and secured. I can't use well QFIL.exe and after after I Have entered the files in the program and start download, i have the issue: "Download Fail: Switch to EDL FailFailed to Switch to Emergency Download mode". I tried everything, could you help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe this can help you to fix that error.
https://geekofia.wordpress.com/2017/10/12/download-failswitch-to-edl-failfirehose-fail-fixed/
MatteoGhost07 said:
Hello,
i'm new in the forum, i have problem with Meizu M6 Note M721H because i have installed twrp recovery with app crack (3.2.1) and next i have deleted SO (flyme firmware) and i have cleaned the phone, after i have updated twrp to 3.2.2-0 version and after reboot, after 1-2 seconds of meizu logo the screen becomes black and the twrp doesn't start....and i haven't firmware installed...fastboot mode working but i haven't permissions because bootloader is locked and secured. I can't use well QFIL.exe and after after I Have entered the files in the program and start download, i have the issue: "Download Fail: Switch to EDL FailFailed to Switch to Emergency Download mode". I tried everything, could you help me?
Click to expand...
Click to collapse
what do you mean you deleted "SO"?
if i understand correctly you replaced stock recovery with twrp but it can not load because your bootloader is locked.
i am not very well familiar with qfill but you are having wrong port open "900E" . you need to enable "9008".
try if this trick works https://www.youtube.com/watch?v=fOpZsUQwOrY
fortunately i have the same problem, same phone, unfortunately you need to open it up, as i understand there are some circuits you need to shortcircuit to load the fastboot, looking into this now, will post updates
And how did someone solve a black screen problem after TWRP botting? I have the same problem and I can not deal with it; /
master2007 said:
And how did someone solve a black screen problem after TWRP botting? I have the same problem and I can not deal with it; /
Click to expand...
Click to collapse
hold down the power button for 20 seconds?
Assuming you still have an the Android OS installed.
Unbrick Meizu M6 note
Hello, why don't you try to flash it with qfil rom?
So about a week ago I was doing stuff on my PC. I take my Redmi 5 Plus (at the time with Pixel Experience installed) and I see that the screen is completely black.
Try to reboot, nothing. Vibration, Black screen for like 5 seconds, repeat.
Try to boot into TWRP, nothing. Fastboot, still that damned black screen.
I decided to reinstall the stock firmware, and I do it through the test point method. The software takes like 40 minutes to do so, but in the end it says "Success!".
Nothing, black screen.
So, I write this post to try and find a solution, or at least now what could have happened as since then I bought the Huawei P20 Lite. It could still be usefull though.
Thanks in advance and good day
@apd911
The time that MiFlash Tool spends to flash a rom in edl mode is aproximately 13 minutes.
Try flashing the firmware that came pre-installed.
You mentioned that you can´t enter to recovery nor fastboot mode before to reinstall the rom stock but after that now you can enter to recovery stock or fastboot?
SubwayChamp said:
@apd911
The time that MiFlash Tool spends to flash a rom in edl mode is aproximately 13 minutes.
Try flashing the firmware that came pre-installed.
You mentioned that you can´t enter to recovery nor fastboot mode before to reinstall the rom stock but after that now you can enter to recovery stock or fastboot?
Click to expand...
Click to collapse
No, same thing, black screen for five seconds then reboot, even in fastboot and recovery
apd911 said:
No, same thing, black screen for five seconds then reboot, even in fastboot and recovery
Click to expand...
Click to collapse
I flashed many roms in edl mode. here you have two possible situations; if your emmc is damaged pc will detect device and will listed how it´s showed in the screenshot attached but the flash won´t be succesfull not even will start, and second if device it´s not detected in the same way that in the picture then it´s not flashing correctly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you attach some screenshot?
hi every body
i faced a problem after updating device with fastboot rom (tar.gz)
while flashing images on phone , an error stoped proccess : no space left on device
aftrer rebooting device only shows mi logo and nothing else.
no fastboot
no recovery ...
i even can't switch active slot to A (images flashed on B partitions).
any way , the only solution i find is EDL mode.
but can't find suitable firehose pegrammer for
I think proper qfil full firmware or sdm665_ufs_firehose loader will help
Because fastboot ROMs aren't complete (according to partition table from rawprogram0.xml)
any body here?
Which ROM did you flash? How exactly did you flash it? What happens when you try to boot into recovery and fastboot?
i flashed my mi A3 with fastboot rom (from mi cc9e) (now i know what i did)
while writing system image : no space left on device Error
then phone restarted and all is only white mi logo on black background (cc9e splash screen)
no fastboot , no recovery , no any thing else (even charge logo)
now the only way i found is to flah original fastboot rom in EDL mode
but both miflahtool and qfil cann't do this , after long time ... an error stop flashing.
in both software : no response from device ... error
(in qfil : ERROR: function: sahara_rx_data:277 Unable to read packet header.)
i tried most of solutions
i think this is loaders problem, i mean prog_firehose_ddr.elf
may be this file make some limitation or something else
is there any one who can upload full device dump or a file like this prog_ufs_firehose_sdm665_ddr.elf
Here is my advice to any one who whant do this
https://forum.xda-developers.com/showpost.php?p=80704797&postcount=6
Click to expand...
Click to collapse
Try to check Mi A1 forum, there were guys who managed to brick their device in the same way. Maybe you'll find a way how to restore it.
Not sure what brings people into blindly flashing roms for different device.
Problem is time of opening port
When i try miflash or qfil (both utilize qSaharaServer) this error is in output log:
openport: it took [ Everytime different numbers in ms ] second to open port. which is longer than 3.000 this indicates your target is not stable.
Any suggestions?
MI A3 DEADBOOT REPAIR FILE 100% WORKING
MI A3 AFTER UPDATE DEAD FIX SOLUTION
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FILE LINK :
https://www.youtube.com/redirect?q=...no0TQ==&v=VOqEsOpxI70&event=video_description
Hi! I think I hard bricked my Redmi Note 4. I tried to install Lineage OS 16, unlocked bootloader and installed TWRP. However, after installing the Lineage OS it keept boot looping. I did all the procedure of wiping davilk, data, cache and system, then went to install and I added this packages: Lineage OS 16, Gapps, Lineage SU addon, unlock_bootloader ZIP, Lazyflasher and Universal DM-Verity, ForceEncrypt.
After flashing it just turned off and now I cannot turn it on. I held power button for 5 minues, nothing. Can't enter fastboot, screen doesnt turn on at all. When I plug it to charger it blinks red notification light. When I connect it to the PC I hear the Windows 10 notification sound but Windows says it cannot recognize the device.
I'm desperate, I think I've tried everything. Please HELP!
If you have the Snapdragon version, try to put it in EDL mode (entering it with the test points, you have to remove the back cover) and reflash an official rom with Mi Flasher. Then you go from the beggining in order to install your custom rom.
I tried that but I can not make it to short the circuits. I followed this inctruction https://forum.xda-developers.com/redmi-note-4/help/xrn4-sd-4-gb-64gb-black-screen-flash-t3761858 but I can't get anything other than "Qualcomm HS-USB Diagnostics 900E". Idk if I need a special kind of metal to short it or maybe the pins are shown incorrectly. I have the Snapdragon version.
UmbraOG said:
I tried that but I can not make it to short the circuits. I followed this inctruction https://forum.xda-developers.com/redmi-note-4/help/xrn4-sd-4-gb-64gb-black-screen-flash-t3761858 but I can't get anything other than "Qualcomm HS-USB Diagnostics 900E". Idk if I need a special kind of metal to short it or maybe the pins are shown incorrectly. I have the Snapdragon version.
Click to expand...
Click to collapse
The pins shown are correct. Try with sharp scissors or a tiny plier. An option is a cable with solid core.. If you get "Qualcomm HS-USB Diagnostics 900E" you are ready to go to Mi Flash, there is no problem that "9008" does not show up..
I did it, this is what I get from MiFlash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UmbraOG said:
I did it, this is what I get from MiFlash
Click to expand...
Click to collapse
you get it imidiatelly or at the end? If you get it at the end, try to ignore it and start the phone.. Otherwise try changing at the right bottom of mi flasher to "clean all" and try again. Also i found something here at the k20 threads, you uncheck the check point from the condifuration of the mi flash..
Cleaning the checkpoint thing worked and MiFlash said the flash was successful, but the phone still doesn't turn on or give any signs of being alive. I guess the only hope now is to give it to repair when the whole covid thing ends. Anyways, thanks for helping me.
My phone is stuck in edl mode for no reason. I am facing the following error when I flash my phone. Can someone tell me what's wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Got same problem with my bricked redmi note 5 (MET7S). Couldn't find any solution. Any assistance will be highly appreciated. Thanks
Sukhdev channi said:
Got same problem with my bricked redmi note 5 (MET7S). Couldn't find any solution. Any assistance will be highly appreciated. Thanks
Click to expand...
Click to collapse
Still found no solution but I have a feeling that something is broken in the motherboard. In my case I think it's the emmc chip because I see storage related errors when I flash.
I might just have to sell the phone parts and buy a new phone. :crying:
It's not the motherboard issue, it's just that your partition has been corrupted and flash tool is unable to send program to your device, I would suggest you to try emmcdl and try to flash from there.
naveen008 said:
It's not the motherboard issue, it's just that your partition has been corrupted and flash tool is unable to send program to your device, I would suggest you to try emmcdl and try to flash from there.
Click to expand...
Click to collapse
Thanks bro. But how to use emmcdl for this phone? Mind giving some instructions?
mih8r said:
Thanks bro. But how to use emmcdl for this phone? Mind giving some instructions?
Click to expand...
Click to collapse
Please use below link for download and instructions.
https://pin.it/6SjCY4C
Let me know if you need any other help.
Thanks
mih8r said:
My phone is stuck in edl mode for no reason. I am facing the following error when I flash my phone. Can someone tell me what's wrong?
Click to expand...
Click to collapse
Did you find any solution? I have been facing the same issue for the last couple of days.
I am also running into a similar issue where I believe I am stuck in EDL. I flash and when it tries to "ping target via firehose" it times out. I am not sure what to do.
Currently my phone doesn't show any boot up screen. When the battery is plugged in and the phone is plugged in the notification light flashes constantly. Not sure what caused it to brick either. It just one day stopped working.
R3B0rnX said:
I am also running into a similar issue where I believe I am stuck in EDL. I flash and when it tries to "ping target via firehose" it times out. I am not sure what to do.
Currently my phone doesn't show any boot up screen. When the battery is plugged in and the phone is plugged in the notification light flashes constantly. Not sure what caused it to brick either. It just one day stopped working.
Click to expand...
Click to collapse
Did you try the test point method?
mujtahid.akon said:
Did you try the test point method?
Click to expand...
Click to collapse
same issue cant solve any solution?