Related
Sorry about that kinda title, but m desperate here. An issue that's been driving me nuts.
Even willing to pay for this mess to get over (Pls don't get me wrong for this). I have a moto 360 2nd gen. It pairs fine with the phone and gets all the notifications alright, however when I try to answer or reject calls or even silent them from the watch, nothing happens on the phone, it just keeps ringing.
I have tried the following ROMS on my Oneplus One:
I) Resurrection remix with android 6.0.1
2) CM 13, snapshot as well as nightly.
3) Darkobas failed cos unable to switch on Bluetooth on that
4) CM 12.1 snapshot.
5) Paranoid Android
Have tried all sorts of Gapp apps as well, stock, pico, micro, slim. Watch has been reset an equal no. of times too.
Watch works fine with other phones with their android versions.
Last attempt resulted in answering, rejecting and silencing calls only when the phone screen was unlocked and awake, as soon as the phone locks, the problem comes back again.
Once again, pls help.
vineet296 said:
Sorry about that kinda title, but m desperate here. An issue that's been driving me nuts.
Even willing to pay for this mess to get over (Pls don't get me wrong for this). I have a moto 360 2nd gen. It pairs fine with the phone and gets all the notifications alright, however when I try to answer or reject calls or even silent them from the watch, nothing happens on the phone, it just keeps ringing.
I have tried the following ROMS on my Oneplus One:
I) Resurrection remix with android 6.0.1
2) CM 13, snapshot as well as nightly.
3) Darkobas failed cos unable to switch on Bluetooth on that
4) CM 12.1 snapshot.
5) Paranoid Android
Have tried all sorts of Gapp apps as well, stock, pico, micro, slim. Watch has been reset an equal no. of times too.
Watch works fine with other phones with their android versions.
Last attempt resulted in answering, rejecting and silencing calls only when the phone screen was unlocked and awake, as soon as the phone locks, the problem comes back again.
Once again, pls help.
Click to expand...
Click to collapse
Somebody, anybody pls. ??
Have you tried with stock, oxygen os? If it works there, then you have a "file shortage" on your current ROM, you'll need to copy some files over from there.
Tried MIUI ROM based on KitKat and that works, didn't attempt oxygen OS cos that would require moving to a different recovery other than TWRP n I then wudnt be able to attempt all these ROMS without it. Can I somehow try and copy these missing files over onto my current ROM ? N wud u be kind enough to tell me how n which ones to copy?
vineet296 said:
Tried MIUI ROM based on KitKat and that works, didn't attempt oxygen OS cos that would require moving to a different recovery other than TWRP n I then wudnt be able to attempt all these ROMS without it. Can I somehow try and copy these missing files over onto my current ROM ? N wud u be kind enough to tell me how n which ones to copy?
Click to expand...
Click to collapse
Well, you said something about the watch using Bluetooth right? I'll see what I can do, right now I am at the airport about to board a 5hr flight so I'll see tomorrow what I can do.
Sent using a ks01lte (gt-i9506) running cm 13
Jee that wud be great, hoping to hear from u soon. N a safe journey ahead.
vineet296 said:
Jee that wud be great, hoping to hear from u soon. N a safe journey ahead.
Click to expand...
Click to collapse
Thanks! Made it safely and I looked it up and in your ROM that works, copy all fils that have the name bluetooth in it from /system/lib to the ROM that doesn't work and report back to me.
Hi again, as suggested I looked for all files that had the name Bluetooth in the system/Lib folder in MIUI ROM (KitKat based) and found only one by the name Bluetooth.default.so, I copied that over and replaced it in the current Resurrection ROM (Marshmallow) on my phone at the same location. Now Bluetooth won't switch on and keeps switching back off immediately. Tried to undo the process but still unable to switch on the Bluetooth now. What should we try next?
vineet296 said:
Hi again, as suggested I looked for all files that had the name Bluetooth in the system/Lib folder in MIUI ROM (KitKat based) and found only one by the name Bluetooth.default.so, I copied that over and replaced it in the current Resurrection ROM (Marshmallow) on my phone at the same location. Now Bluetooth won't switch on and keeps switching back off immediately. Tried to undo the process but still unable to switch on the Bluetooth now. What should we try next?
Click to expand...
Click to collapse
There is a directory called "/etc/bluetooth", copy it to your ROM and report please , I am feeling that we are getting closer to solving the issue.
Did so, still the Bluetooth wudnt switch on. next is?
vineet296 said:
Did so, still the Bluetooth wudnt switch on. next is?
Click to expand...
Click to collapse
Was bluetooth on while you were copying the files?
Might have been, can't say for sure but I guess it was switched off, but yet again not sure.
vineet296 said:
Might have been, can't say for sure but I guess it was switched off, but yet again not sure.
Click to expand...
Click to collapse
Well, f***, it needs to be off otherwise that happens.
Ohk. Now is there some way we can do something or I'd hv to wipe and install the entire ROM before we can try once again?
vineet296 said:
Ohk. Now is there some way we can do something or I'd hv to wipe and install the entire ROM before we can try once again?
Click to expand...
Click to collapse
I think you will have to wipe everything (system, data, cache, dalvik, preload) and start over again.
Alright, as u say, I'll make an attempt once again today and copy the files over as u said ensuring that Bluetooth is switched off during the entire process and then report back to u. N m thankful u walking me thru this.
vineet296 said:
Alright, as u say, I'll make an attempt once again today and copy the files over as u said ensuring that Bluetooth is switched off during the entire process and then report back to u. N m thankful u walking me thru this.
Click to expand...
Click to collapse
Yea, if that doesn't work, we'll have to dig way deeper, but since you said that it worked on the other ROM this should be it. I know how hard it is to be stuck in a problem that there is no info about on the internet.
It is, I was like how come m the only one facing this, nobody else in the whole wide world of Google. Ok before I do this, just to recap, fresh install the Resurrection Remix ROM, n before I even switch on the Bluetooth, copy all the Bluetooth files over from those two locations of the working ROM which u told me about and then try the Bluetooth, right?
vineet296 said:
It is, I was like how come m the only one facing this, nobody else in the whole wide world of Google. Ok before I do this, just to recap, fresh install the Resurrection Remix ROM, n before I even switch on the Bluetooth, copy all the Bluetooth files over from those two locations of the working ROM which u told me about and then try the Bluetooth, right?
Click to expand...
Click to collapse
Affirm sir, crossing my fingers hoping it will work .
RAZERZDAHACKER said:
Affirm sir, crossing my fingers hoping it will work .
Click to expand...
Click to collapse
Tried, did it while Bluetooth was switched off, copied the Bluetooth.default.so file from system/lib of the working ROM along with the entire Bluetooth folder from etc/ to the same location of the non functional ROM, but just as last time, now not able to switch on Bluetooth all together. Back to Base unfortunately
LineageOS Android Distribution 14
Lineage OS Android Distribution is the continuation of the now discontinued CyanogenMod.
Instructions1. Make a Nandroid backup using TWRP or similar custom recovery if flashing from a different ROM.
2. Download the latest LineageOS ROM (uploading) and copy it to either the internal storage, an SD card, or an OTG usb drive.
3. Download a Nougat (7.1) Google Apps Package (GApps) for ARM devices if desired (OpenGApps recommended).
4. Boot into the custom recovery to flash the ROM and/or GApps .
5. Factory reset if flashing from a different ROM.
XDA:DevDB Information
Unofficial LineageOS, ROM for the Sprint HTC EVO 4G LTE
Contributors
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: HBOOT 2.10.0000 or 2.10.5555
Version Information
Status: Testing
Current Beta Version: lineage-14.1-20170302
Beta Release Date: 2017-03-02
Created 2017-01-22
Last Updated 2017-03-02
I'm going find this phone in one of the shoe box and install this thank you kind sir
Wow Los has finally arrived for the Jewel but my Jewel is no longer with me
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
mecha2012 said:
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
Click to expand...
Click to collapse
Thanks for testing! Try the new Nougat build—I wasn't able to move apps onto the SD card (that is a LineageOS bug), but I was able to format it as internal storage.
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go ?
mecha2012 said:
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go
Click to expand...
Click to collapse
There appears to be an error in the build. I will upload a new build within a day.
Edit: New build has been uploaded! Please report if it works.
Never thought my Jewel would ever see Nougat (let alone Lollipop or Marshmallow). Just flashed and all is working well so far. Awesome work!
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
idumych said:
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
Click to expand...
Click to collapse
I believe that the service must be activated on a stock ROM before flashing a custom ROM. Then, the correct APN has to be set according to the carrier under Settings > More > Cellular networks > Access Point Names.
Schiben said:
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
Click to expand...
Click to collapse
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
VitaTaf said:
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
Click to expand...
Click to collapse
I've tried that in the past. Forgot about it this time around. Tried it again and it seems to be about the same as the actual power button for getting the screen to come on correctly.
Good ol' Jewel. Is this rom working ok?
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
King of the Couch said:
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
Click to expand...
Click to collapse
The ROM is working fine for the most part. The battery is not great, but that may be due to the battery's age. Additionally, there is a bug with BoringSSL that sometimes prevents the Play Store or Gmail from working temporarily.
sounds good. yeah, I'm sure it's age. thanks man. take care-
Trouble with WiFi
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
keysneptune said:
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
Click to expand...
Click to collapse
I believe that the WiFi issue have been fixed in the latest build (20170522).
Thank you for this rom!
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
familyjewels said:
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
Click to expand...
Click to collapse
Thanks for trying out the ROM! The WiFi activity arrows are intentionally disable on LineageOS. I do not currently have an active cell service on this device, so I am unable to fix the activation bug for now. Could you flash the patch below in recovery and test if autorotation is working properly? It should also enable the option to hide the Superuser icon under "Status bar" > "System icons".
Hello everyone !
I have a problem : When I flash a rom (Nougat or Marshmallow), I do not have any mobile data. I can always make calls and receive messages but when I activate the data, I do not have the symbol 3g or 4g and impossible to go on the internet (it tells me that I am not connected to any network) or Receive MMS.
I tried several ROMs based on Android 6 and 7 but the problem is the same, I also tried to flash different firmwares but it does not change anything while on Xiaomi.eu or stock MIUI ROM I have no problems.
I checked the IMEI and the APN, everything is correct.
I also tried the VoLTE patch (Android 6&7) but it did not change anything.
So I'm asking you the question: Do any of you have a solution?
I use the lastest Resurrection Remix ROM with the MIUI firmware (7.3.9 by @reemar)
SharkEzz said:
Hello everyone !
I have a problem : When I flash a rom (Nougat or Marshmallow), I do not have any mobile data. I can always make calls and receive messages but when I activate the data, I do not have the symbol 3g or 4g and impossible to go on the internet (it tells me that I am not connected to any network) or Receive MMS.
I tried several ROMs based on Android 6 and 7 but the problem is the same, I also tried to flash different firmwares but it does not change anything while on Xiaomi.eu or stock MIUI ROM I have no problems.
I checked the IMEI and the APN, everything is correct.
I also tried the VoLTE patch (Android 6&7) but it did not change anything.
So I'm asking you the question: Do any of you have a solution?
I use the lastest Resurrection Remix ROM with the MIUI firmware (7.3.9 by @reemar)
Click to expand...
Click to collapse
Try *#*#4636#*#* phone information and choose network, it fixed it for me..
reemar said:
Try *#*#4636#*#* phone information and choose network, it fixed it for me..
Click to expand...
Click to collapse
Thanks for your quick reply !
I do not understand very well, once in phone information, what should I do exactly?
Thank you in advance !
I've been encountering similar issues with no data available... what helped me is I simply installed ROM I wanted and then restored EFS (partition or whatever it is) from a ROM backup I am sure data works....
Just check your APN settings...
I had similar issues after installing some google apps packages - don't remember which exactly. Try to install fresh rom without Gapps and check if problem still exists. If not, look for good Gapps. It took me whole day to find which caused this.
Harrocan said:
I had similar issues after installing some google apps packages - don't remember which exactly. Try to install fresh rom without Gapps and check if problem still exists. If not, look for good Gapps. It took me whole day to find which caused this.
Click to expand...
Click to collapse
My mobile data was working when I installed Resurrection Remix but after installing OpenGApps it stopped working.
Jyot Prakash Verma said:
My mobile data was working when I installed Resurrection Remix but after installing OpenGApps it stopped working.
Click to expand...
Click to collapse
I have had a problem with mobile data transmission on Xiaomi Redmi Note 7 (Lavender). I installed various custom rom Android 12 and unfortunately on any of them I had no internet connection via Mobile Data. WiFi worked, phone calls also ...
Here's what helped me:
1. I installed a custom rom based on MIUI (of course, first Orangefox, and then MiUI Wolf Os for Lavender). After installation, everything worked, there was an internet connection via Mobile Data. The SIM card was even on Sloat 2 and everything worked!
2. I installed Awaken OS 2.9 for Lavender (with gapps). When I was asked to insert the SIM card during the installation, I put it into the slot 1. Unfortunately, Awaken 2.9 does not support the mobile internet on the slot 2.
Why does this solution help? Because this way of installing Awaken OS does not destroy firmware from Xiaomi. I hope it helps you too and will work too for you
Android Ice Cold Project
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
[ROM]
Download Latest (credits to @c0urier)
(Note: need one more reboot after fresh install for data to work.)
[GAPPS]
Download
Clean installation is encouraged if come from different roms or android versions...
Thanks AICP team for the amazing ROM.
Special thanks to: @DerTeufel1980 , @sbrissen , @rogersb11 , @TheBr0ken , @DreamFX , @frankie, @Option58, @PoisonNinja...
XDA:DevDB Information
AICP, ROM for the Verizon Samsung Galaxy Note II
Contributors
wilson3q
Source Code: http://github.com/LineageOS/android_kernel_samsung_smdk4412
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2017-12-15
Last Updated 2017-12-15
Been running this for a couple days and it's doing well. I did not flash gapps. The biggest issue I have seems to be that apps will crash once the first time they try to access storage. I just reopen the app to do the same task and it works. Sometimes the MTP service crashes when I do something storage related, too. WiFi seems fine, but I haven't had a chance to use Bluetooth or make a call yet.
Thanks for this. Apparently the last ROM I was running on this particular device was a CM build of yours from early last year .
Adding this a couple days later: Wow, battery life has drastically improved over the old CM ROM.
100% Recommended
Just installed this to my Verizon Note 2 SCH-i605.
Running very stable and fast. Definitely better than any ROMS out there.
God bless you!
hi
how to apply it because i'm newer to install custom rooms
I'm having a real good time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
1. Which carrier to do you use?
2. What APN settings did you use?
This will be easy fix~I have no problems with my rom at the moment.
Dopeskwyd said:
I'm having a real goo1d time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
Click to expand...
Click to collapse
sideyh said:
Just installed this to my Verizon Note 2 SCH-i605.
Running very stable and fast. Definitely better than any ROMS out there.
God bless you!
Click to expand...
Click to collapse
verizon note 2 on build ND7?
sideyh said:
1. Which carrier to do you use?
2. What APN settings did you use?
This will be easy fix~I have no problems with my rom at the moment.
Click to expand...
Click to collapse
1. The big red V
2. No idea. Just however it came by default. Been on another rom for a few weeks now. If I remember correctly I did go into the *#*#4636*#*# menu and reset VZW's smsc number, but was dismayed like a mofo that it was of no use.
Would love to get this rom running solid, but the screen going black on a call is a major killjoy.
Update:
Loaded this rom again, still no go on the texts. Tried to restore APNs from a backup and got a pop-up saying this version of Android doesn't allow modifying of apn info.
Most of the entries for all four apn options say "not set"
I can't get it to save my APN. It's the country code. It will not let you have 311 it only let's you use APNs that have a 310 country code. I can't even edit it directly and use the 311 country code.
Any idea how I can get around this.? I've seen this in other ROMs before some ROMs just won't work on virtual carriers. And some don't have an problems with the 311 code.
---------- Post added at 04:20 AM ---------- Previous post was at 04:13 AM ----------
Dopeskwyd said:
I'm having a real good time with this rom. Really brings this ol' girl back to life. I'm also having a real bad time with this rom.
Three issues I'm having so far:
1. Can't send a text. I can get texts in, but when I try to send one out will just say "sending" be then display a notification that it failed.
2. Phone screen turns off on calls and will not come on at all. Power button, home button, prox sensor, nothing gets the screen to come back on. This means I can't hang up and can't press 1 for English.
And 3. Caller ID isn't working at all.
I'm also getting a seemingly random popup saying MTP host failed, or something like that. Not sure if that is related
Any advice on what the problem could be would be splendid.
Click to expand...
Click to collapse
Read this. I think you might be needing the base band and build up dates that these guys are talking about and linking to.
https://forum.xda-developers.com/note-2-verizon/development/mj9-radio-t3285280
Already on the mj9. pushed the md7 radio, reflashed the rom, no change. going back to beans 4.1.
Is there anyway I can unlock the ND7 bootloader for this device or is that completely hopeless?
swift5645 said:
Is there anyway I can unlock the ND7 bootloader for this device or is that completely hopeless?
Click to expand...
Click to collapse
Once updated, it is hopeless
stays stuck on aicp logo after flash. wth?
jerryspring said:
stays stuck on aicp logo after flash. wth?
Click to expand...
Click to collapse
the reason is because you swiped after reset.
you should not install any rooting after flashing.
flashing -> reboot WITHOUT rooting option
you shall be fine
sideyh said:
the reason is because you swiped after reset.
you should not install any rooting after flashing.
flashing -> reboot WITHOUT rooting option
you shall be fine
Click to expand...
Click to collapse
I did that. Still same outcome
um..yeah.. ok.. how do you even know what i did after flashing rom? i flashed rom, and rebooted...i have flashed supersu then rom and rebooted, i have tried all ways to flash the rom. keeps on aicp logo animation. i went and flashed stock rom, reunlocked the bootloader and flashed rom again. still doing same. wth? Flashed and waited 3 hours. Something is wrong with this phone.
I know because i made same mistakes and installed same thing multiple times until i figured it out.
If you see AICP logo, you are 99% there.
Did you install Gapp?
sideyh said:
I know because i made same mistakes and installed same thing multiple times until i figured it out.
If you see AICP logo, you are 99% there.
Did you install Gapp?
Click to expand...
Click to collapse
Nothing is writing to partitions... I can't even paste zips onto my phone from my PC. Internal storage on PC shows it's -1046870900. WTH?
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
sideyh said:
Once updated, it is hopeless
Click to expand...
Click to collapse
No it's not. Flash ramc3 firmware
jerryspring said:
Nothing is writing to partitions... I can't even paste zips onto my phone from my PC. Internal storage on PC shows it's -1046870900. WTH?
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
No it's not. Flash ramc3 firmware
Click to expand...
Click to collapse
Use your external micro SD Card for installation.
You don't need to paste ZIP files onto your internal phone from the beginning...Gapp and ZIP files must be stored in microSD Card first.
Are their any projects related to the Oukitel K9 phone? I purchased one and use it on the AT&T network here in the USA.
The phone is decent but the built in Android is very generic and buggy.
I would love to unlock the potential of this phone with a custom ROM.
Let me know if this isn't the right place to ask and point me in the right direction!
Lannie
No custom roms at this time, why bother when you can custom Android 9 using Magisk , Xposed and Substratum. Although having a Lineage 17 would be nice.
I ask because the Android on this phone is so buggy and lacking features. I don't see how the options you gave will add features I need. They might as I'm new to these apps and don't know much about them.
lschafroth2 said:
I ask because the Android on this phone is so buggy and lacking features. I don't see how the options you gave will add features I need. They might as I'm new to these apps and don't know much about them.
Click to expand...
Click to collapse
If you private message me I cannot get to the messages here. If I click on messages it takes me to the register or reset password every time. I have no way to read them.
At this point it's useless to try since the mediatek drivers no longer work on Windows 10. Not a single guide on installing on Windows 10 64 bit work anymore. If anyone knows how to get the Oukitel drivers to work, let me know. No amount of driver sign or advanced boot works. Every time I plug in the phone it says the previous device malfunctioned.
It worked once and I have never connected the phone since. Will not work.
lschafroth2 said:
At this point it's useless to try since the mediatek drivers no longer work on Windows 10. Not a single guide on installing on Windows 10 64 bit work anymore. If anyone knows how to get the Oukitel drivers to work, let me know. No amount of driver sign or advanced boot works. Every time I plug in the phone it says the previous device malfunctioned.
It worked once and I have never connected the phone since. Will not work.
Click to expand...
Click to collapse
This might seem obvious, but could never get my PC (Windows10 64bit) to even recognize my Oukitel K9 until I (out of desperation, and to try to prove a point to someone) reinstalled Minimal ADB & Fastboot 1.4.3 from here:
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
It's the same thing I had previously installed, and I didn't expect it to suddenly/miraculously start working, but it did.
I'll pm you.
lschafroth2 said:
Are their any projects related to the Oukitel K9 phone? I purchased one and use it on the AT&T network here in the USA.
The phone is decent but the built in Android is very generic and buggy.
I would love to unlock the potential of this phone with a custom ROM.
Let me know if this isn't the right place to ask and point me in the right direction!
Lannie
Click to expand...
Click to collapse
Best rom floss october edition with buildprop tweaks transformed this phone into next level. Thanks to phherguson
nation888888 said:
Best rom floss october edition with buildprop tweaks transformed this phone into next level. Thanks to phherguson
Click to expand...
Click to collapse
Thanks, but I sold this phone and went to a Pixel 4 XL. I needed something reliable and InTune refused to work on the old Oukitel.
Has anyone worked out ramdisk partition for Magisk?
Discovery,
Thanks to Phh has developed the perfect ROM for the Oukitel K9. Strangely I have had to try many ROMs to find the perfect one. The Lineage ROM; I had GPS issues, the Recent app button not working, and signal loss. Wanted the latest OS and this one is the winner below.
https://github.com/phhusson/treble_experimentations/releases/download/v400.e/system-squeak-arm64-ab-vndklite-gapps-secure.img.xz
Llevo un par de semanas probando la rom y no funciona el detector de huellas,se puede mejorar?hay alguna rom(Android 12) mas estable y que todo funcione?,gracias
MOD Edit: I've been testing the rom for a couple of weeks and the fingerprint sensor doesn't work, can it be improved? Is there a more stable rom (Android 12) that makes everything work? Thanks
Try the updated version https://github.com/phhusson/treble_experimentations/releases/tag/v402
Should resolve the fingerprint issue. I have also tried the AOSP 12.1 v410 and the result is the phone goes into a boot loop. Not sure why when the previous version installs so easily. I have built a custom TWRP 3.6.1 and will be trying it soon. The reason why we need to update; that the TWRP 3.3.1 version is limited and could be the reason why there are install issues with some GSIs out there. The encryption keeps reactivating even if I use scripts, flash no verify-verity. Hopefully, this will work. I'm enjoying the new version too much to start again I will keep you posted.
This one is supreme V411 and distracts me away from my Note 20 Ultra. https://github.com/phhusson/treble_experimentations/releases/tag/v411 .Works well with the Oukitel K9, recommend to use swapram module for boosting memory 4gb to 8gb. Searching for a working TWRP 3.6.
nation888888 said:
This one is supreme V411 and distracts me away from my Note 20 Ultra. https://github.com/phhusson/treble_experimentations/releases/tag/v411 .Works well with the Oukitel K9, recommend to use swapram module for boosting memory 4gb to 8gb. Searching for a working TWRP 3.6.
Click to expand...
Click to collapse
Have you found better rom for k9? I've used several gsi images but system is very laggy. Yet to find a good fast custom rom for k9.
[email protected]@ said:
Have you found better rom for k9? I've used several gsi images but system is very laggy. Yet to find a good fast custom rom for k9.
Click to expand...
Click to collapse
I found this one is the best;
https://www.mediafire.com/file/74b5bgfu0vsjcvg/CherishOS_A13-arm64-bgS-slim_20221121.img.xz/file
nation888888 said:
I found this one is the best;
https://www.mediafire.com/file/74b5bgfu0vsjcvg/CherishOS_A13-arm64-bgS-slim_20221121.img.xz/file
Click to expand...
Click to collapse
Thanks a lot. I will give it a try!
nation888888 said:
I found this one is the best;
https://www.mediafire.com/file/74b5bgfu0vsjcvg/CherishOS_A13-arm64-bgS-slim_20221121.img.xz/file
Click to expand...
Click to collapse
I've flashed this one and found it is as laggy as CrDroid. I thought it might be due to not wiping data before flashing. Decided to reboot to recovery to wipe data. And.. phone stuck at twrp logo. No go further. Do you have any better TWRP than mine 3.3.1?
Try using the "Yet another Kernel Tweaker" module in Magisk. Through all my searches I could only find the TWRP 3.3.1. Tried building using kitchen but failed. Sometimes the TWRP will take up to 5 to 10 minutes, remember it is trying to decrypt. If it takes longer then SPflash, assuming done correctly with vbmeta. After the initial install the updates and synchronization starts processing. This causes a slow-down. I thought the same. Leave the device for a day to update and synchronize then should be faster.
nation888888 said:
Try using the "Yet another Kernel Tweaker" module in Magisk. Through all my searches I could only find the TWRP 3.3.1. Tried building using kitchen but failed. Sometimes the TWRP will take up to 5 to 10 minutes, remember it is trying to decrypt. If it takes longer then SPflash, assuming done correctly with vbmeta. After the initial install the updates and synchronization starts processing. This causes a slow-down. I thought the same. Leave the device for a day to update and synchronize then should be faster.
Click to expand...
Click to collapse
TWRP logo is for hours here.
Now I can't even enter fastboot after I've chosen reboot to recovery from cherishos power menu.
I hit volup+pwr and boot menu doesn't even show up. Tried 20+ times already.
I'm stuck. The last hope is to wait for it to discharge on twrp logo and try my luck with fastboot menu again.
Otherwise I have no idea. Now I question myself why on Earth I would even try to better something that works at least average ))))
nation888888 said:
Try using the "Yet another Kernel Tweaker" module in Magisk. Through all my searches I could only find the TWRP 3.3.1. Tried building using kitchen but failed. Sometimes the TWRP will take up to 5 to 10 minutes, remember it is trying to decrypt. If it takes longer then SPflash, assuming done correctly with vbmeta. After the initial install the updates and synchronization starts processing. This causes a slow-down. I thought the same. Leave the device for a day to update and synchronize then should be faster.
Click to expand...
Click to collapse
I've managed to revive it. But still on cherishos and few other A13 roms screen is flickering. Have you got something like that?