Here I'm sharing force fast charging magisk module for poco f1.
There are 2 modules here. Choose one of them that suits your phone best.
My suggestion: If you live in higher room temperature then you should go for 2600mAh otherwise choose 3300mAh
Installation:
Go to magisk manager.
Tap on Modules.
Select the module from your storage.
Reboot the device.
That's all
Thank you.
Please mention what's the use of these modules. Do they make phone charge faster?
lockhrt999 said:
Please mention what's the use of these modules. Do they make phone charge faster?
Click to expand...
Click to collapse
Hope you checked the post title
It enables force fast charge under mentioned battery temperature.
Does it not decrease as the phone gets higher battery percentage? Is the speed consta
nhossainbd said:
Here I'm sharing force fast charging magisk module for poco f1.
There are 2 modules here. Choose one of them that suits your phone best.
My suggestion: If you live in higher room temperature then you should go for 2600mAh otherwise choose 3300mAh
Installation:
Go to magisk manager.
Tap on Modules.
Select the module from your storage.
Reboot the device.
That's all
Thank you.
Click to expand...
Click to collapse
Does it not decrease as the phone gets higher battery percentage? Is the speed constant until it fully charged?
pabloescobar012 said:
Does it not decrease as the phone gets higher battery percentage? Is the speed constant until it fully charged?
Click to expand...
Click to collapse
It should decrease the speed after reaching 90%.
nhossainbd said:
It should decrease the speed after reaching 90%.
Click to expand...
Click to collapse
pls provide supported rom
markmywordz said:
pls provide supported rom
Click to expand...
Click to collapse
Supports all ROMs including MIUI & OOS.
these are Ben's Thermal, Just renamed!
huh...
MODERATOR will ban you OP.
heyalfaq said:
these are Ben's Thermal, Just renamed!
huh...
MODERATOR will ban you OP.
Click to expand...
Click to collapse
Get some life dude ?
you don't even know the difference between thermal & my module. My FC module and ben's thermal are totally different. Scripts are not encrypted, just open all files and compare yourself. And try to respect others work.
nhossainbd said:
Get some life dude ?
you don't even know the difference between thermal & my module. My FC module and ben's thermal are totally different. Scripts are not encrypted, just open all files and compare yourself. And try to respect others work.
Click to expand...
Click to collapse
r there 42°c n 46°c 3300mah force fast charge available?
flashed your zip. Phone not charging . am using pixel os
. how should i revert
the only thing that really worked for me
thanx alot
good job dude ?
does it simply uninstalled from magisk if anything goes wrong? and what about temperature does phone start heating, i am using optimus drunk kernel and charging is slow.
Great mods
Thanks for sharing these mods, but folks should realize that higher charging currents greatly reduce battery longevity as well.
timbuctoo said:
Thanks for sharing these mods, but folks should realize that higher charging currents greatly reduce battery longevity as well.
Click to expand...
Click to collapse
yeah but its within official limit isn't it
bravo2526 said:
flashed your zip. Phone not charging . am using pixel os
. how should i revert
Click to expand...
Click to collapse
That's really unexpected. You can just remove the module from magisk. And everything will revert back to previous stage.
Thank you.
mralam92 said:
does it simply uninstalled from magisk if anything goes wrong? and what about temperature does phone start heating, i am using optimus drunk kernel and charging is slow.
Click to expand...
Click to collapse
Simply uninstall from magisk.
sasukesama said:
the only thing that really worked for me
thanx alot
Click to expand...
Click to collapse
That's great! ?
Yo, this works wonders. I'd run back to stock rom every now and then just bc I missed how fast I could charge. Now I have it on every other rom bc of this mod. Thank you ?
Related
Hi guys,
I'm coming from the Oneplus One and that phone used to charge at a speed of 2ma.
Using some apps, I've come to see that the Oneplus X charges only at 1.2ma tops for me.
Is there any kernel which supports 2ma charging? Thanks!
I don't see the charging speed a problem, considering that it's got a lesser capacity battery. Charging times are fast enough that you wouldn't notice any difference. Just keep it down and let it charge.
As for kernels, you could check the developments section
Sent from my SM-G920F using Tapatalk
I guess blu spark kernel has fast charging support... Look it up
Mine charge at 1500mAH
Max voltage which can go through is 1800mAh for our phone
0-60%--- Phone charges at 1500mAh(Rapid Charge)
60-90%--Phone charges at 1200mAh
90-100%- 300mAh (Trickle Charge)
This is the case in all phones .. take it nexus 5 ... xiaomi mi4.....One plus one
rockuppl said:
Mine charge at 1500mAH
Max voltage which can go through is 1800mAh for our phone
0-60%--- Phone charges at 1500mAh(Rapid Charge)
60-90%--Phone charges at 1200mAh
90-100%- 300mAh (Trickle Charge)
This is the case in all phones .. take it nexus 5 ... xiaomi mi4.....One plus one
Click to expand...
Click to collapse
I understand trickle charging but does it really charge at 1800? Can you post some screenshots from an app?
Bluspark kernel only supports usb fast charge i.e charging is fast when connect to pc or something like that not charger.
mohammedtabish said:
Bluspark kernel only supports usb fast charge i.e charging is fast when connect to pc or something like that not charger.
Click to expand...
Click to collapse
yes, and you know what? ^_^ usb can't produce more than 0.5
btw, for OP - slower your phone charges better is for your battery life.
AlexVendettA said:
yes, and you know what? ^_^ usb can't produce more than 0.5
btw, for OP - slower your phone charges better is for your battery life.
Click to expand...
Click to collapse
Thanks I've heard this but never really noticed a tangible difference.
Right now I'm running CM 12.1 Master Awesome. Would you recommend I change to Blu Spark kernel?
RashidD said:
Thanks I've heard this but never really noticed a tangible difference.
Right now I'm running CM 12.1 Master Awesome. Would you recommend I change to Blu Spark kernel?
Click to expand...
Click to collapse
I understand why you would want to, but as i know bluspark doesnt "Support" cm for now but it works - try it, in case you always can go back on cm kernel, in using oos 2.2 with bluspark, gives me 4-5 screen time with Wi-Fi always on which is more than enough for me, waiting stable marshmallow ^.^
AlexVendettA said:
I understand why you would want to, but as i know bluspark doesnt "Support" cm for now but it works - try it, in case you always can go back on cm kernel, in using oos 2.2 with bluspark, gives me 4-5 screen time with Wi-Fi always on which is more than enough for me, waiting stable marshmallow ^.^
Click to expand...
Click to collapse
Alright cool. I was actually quite happy with the battery life. Yesterday was my first day and i got just over 4 hrs with a mix of wifi and lte. About 14 hrs standby. So not bad at all...
RashidD said:
Alright cool. I was actually quite happy with the battery life. Yesterday was my first day and i got just over 4 hrs with a mix of wifi and lte. About 14 hrs standby. So not bad at all...
Click to expand...
Click to collapse
Welp, then just keep things like they are for now, or tryout every combination, maybe you will find something that gives you more satisfaction oxygen is quite cool, very stock clear, the only problem I had so far was solved in last update(ril+4g connectivity sometimes stopped working and I had to go airplanemode)
Actually Blu Spark is supported on Cm 12.1. I highly recommend it. It's a drastic upgrade from the stock one used
RJDTWO said:
Actually Blu Spark is supported on Cm 12.1. I highly recommend it. It's a drastic upgrade from the stock one used
Click to expand...
Click to collapse
Upgrade in what way? Battery life?
RashidD said:
Upgrade in what way? Battery life?
Click to expand...
Click to collapse
Definitely. Don't forget about the ability to undervolt either. It helps a ton. Give it a try. Oh and xposed with Amplify and Greenify helps a lot too.
RJDTWO said:
Definitely. Don't forget about the ability to undervolt either. It helps a ton. Give it a try. Oh and xposed with Amplify and Greenify helps a lot too.
Click to expand...
Click to collapse
Did you notice a difference in Screen On Time? (SOT) or just standby?
RashidD said:
Did you notice a difference in Screen On Time? (SOT) or just standby?
Click to expand...
Click to collapse
Both. I get about 6-7 hours of SOT. As for standby, it doesn't budge but a percent over night. It's great for a 2500 mah device.
RJDTWO said:
Both. I get about 6-7 hours of SOT. As for standby, it doesn't budge but a percent over night. It's great for a 2500 mah device.
Click to expand...
Click to collapse
Which ROM are you on btw?
RJDTWO said:
Actually Blu Spark is supported on Cm 12.1. I highly recommend it. It's a drastic upgrade from the stock one used
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=63871059
Read this post, specially the part with "so far I support only oxygenOs"
But as I said it works.
AlexVendettA said:
http://forum.xda-developers.com/showthread.php?p=63871059
Read this post, specially the part with "so far I support only oxygenOs"
But as I said it works.
Click to expand...
Click to collapse
Thanks guys. I'm testing it out now and there seems to be noticeable improvement in battery life. Almost as good or decent as my OPO.
RashidD said:
Which ROM are you on btw?
Click to expand...
Click to collapse
Multiple ROMs haha. AICP, Cm 13, Sailfish, and Oxygen. I don't stick to one. AICP is the best in my opinion
I ran across this several days ago and decided to test it on my own Le Max 2: With it I managed to get 6.5 hours SoT with fairly heavy web browsing (Opera) and music playback (Poweramp). I'm running AospExtended 5.4 Official 2018-04-17 and Helix Engine 2.0 Beta Free.
https://www.xda-developers.com/heli...e-efficiency-battery-consumption-performance/
Kind regards,
Bill...
Thanks for this advice, i will test it, because it's a really good idea. Considering the fact, that i'm not a heavy user, it should be interesting, if the effect is still noticable.
For me too much apps that do not open or open very slowly at the moment.
I like the dynamic flow of slowing down or speeding up the CPU for the phone needs. I will check the development later on.....
Tdjee said:
For me too much apps that do not open or open very slowly at the moment.
I like the dynamic flow of slowing down or speeding up the CPU for the phone needs. I will check the development later on.....
Click to expand...
Click to collapse
That's probably due to the kernel your ROM is using. I've not experienced any of those problems with the ROM I'm using... :good:
Should I make changes to the default profile (I assume "Balanced Profile") or just leave it as it is?
Tdjee said:
For me too much apps that do not open or open very slowly at the moment.
I like the dynamic flow of slowing down or speeding up the CPU for the phone needs. I will check the development later on.....
Click to expand...
Click to collapse
I can confirm this, I uninstalled it hence. Also it didn't have any noticeable improvement like 1 hour SOT extra or so hence using it is a no no.
bobjobs said:
Should I make changes to the default profile (I assume "Balanced Profile") or just leave it as it is?
Click to expand...
Click to collapse
I just left at the default, which is Dynamic Balanced. By the way, that profile incorporates Battery, Balanced, and Performance mode switching.
this app works without root?
AgustinH said:
this app works without root?
Click to expand...
Click to collapse
No...
I can confirm this. With battery saver applied, can even reaches 8hs sot for straight youtube, chrome n fb. I have stopped trying other roms since i use this setup. Thanks mate for your suggestion.
m91c said:
I can confirm this. With battery saver applied, can even reaches 8hs sot for straight youtube, chrome n fb. I have stopped trying other roms since i use this setup. Thanks mate for your suggestion.
Click to expand...
Click to collapse
Which Rome you are using
venky83 said:
Which Rome you are using
Click to expand...
Click to collapse
The Italian. There is a dozen of American Romes, none of them good.
venky83 said:
Which Rome you are using
Click to expand...
Click to collapse
The exact rom and its version as suggested by Bill.
m91c said:
I can confirm this. With battery saver applied, can even reaches 8hs sot for straight youtube, chrome n fb. I have stopped trying other roms since i use this setup. Thanks mate for your suggestion.
Click to expand...
Click to collapse
How did you change the profile .... can you give the screenshot of the profile.
Battery really improved here! Before: 3:30 SoT. Now 5h.
Thanks! :victory:
Can I use this in EUI 6 ROM? Or it's only for Oreo ROMs?
venky83 said:
How did you change the profile .... can you give the screenshot of the profile.
Click to expand...
Click to collapse
I have the same question
AgustinH said:
I have the same question
Click to expand...
Click to collapse
i'm trying this app and works very well i just modify some starting app and give them some permision or deny , from standard configuration and the result is excellent.. it improved the battery life..
BeeTrain said:
Can I use this in EUI 6 ROM? Or it's only for Oreo ROMs?
Click to expand...
Click to collapse
Its an app from play store. Give a try and find out.
I hope it will work. Thanks
Cheers
sssyraj.
BeeTrain said:
Can I use this in EUI 6 ROM? Or it's only for Oreo ROMs?
Click to expand...
Click to collapse
It may. But I suspect you'll be better results with it if the device is rooted and allows Super User access. As a matter of fact, root access is required for it...
So my charging port got damaged and it used to take hours to charge the phone while not using it, then I got it repaired recently
But I notice that while charging it, the battery keeps decreasing, I am using the original charger. I did also try a few other chargers but it seems to be the same
My battery does increase when screen is off and I leave it aside for a level, at a slower rate.
I want to know how to fix this battery decreasing while charging?
Try to install kernel again.
Agni kernel give you the option for thermal libs and more. This may change your charge time.
If not work for you, see in the forum a post with diode problem.
https://forum.xda-developers.com/redmi-note-3/help/rn3-pro-charging-charging-board-t3671977
Good luck!
i0N77 said:
So my charging port got damaged and it used to take hours to charge the phone while not using it, then I got it repaired recently
But I notice that while charging it, the battery keeps decreasing, I am using the original charger. I did also try a few other chargers but it seems to be the same
My battery does increase when screen is off and I leave it aside for a level, at a slower rate.
I want to know how to fix this battery decreasing while charging?
Click to expand...
Click to collapse
How much current u get from 0 to 70% ?
naik2902 said:
How much current u get from 0 to 70% ?
Click to expand...
Click to collapse
How do I check that?
i0N77 said:
How do I check that?
Click to expand...
Click to collapse
What rom u r using ?
i0N77 said:
How do I check that?
Click to expand...
Click to collapse
ampere app ig good for this
I'm using stock ROM and the current level on amepere shows around 140ma most of the time
naik2902 said:
What rom u r using ?
Click to expand...
Click to collapse
naik2902 said:
How much current u get from 0 to 70% ?
Click to expand...
Click to collapse
I'm using stock ROM and current(ampere) level is 140mA while charging
i0N77 said:
I'm using stock ROM and current(ampere) level is 140mA while charging
Click to expand...
Click to collapse
Install telegram chat app. all xda devs and active on telegram.
Just install it and search kenzo groups. Here very slow response.
Join chat. See u there ion77
use agni kernel with alternative thermal libs =)
if you dont like agni kernel i dont know other fix for it.
in my opinion you may try this and if it worked search alternative fix... but you know the problem.
if not try it you dont know if the thermal libs can solve your issue.
yopu try with other chargers... but with other cable???
Chrisis25 said:
use agni kernel with alternative thermal libs =)
if you dont like agni kernel i dont know other fix for it.
in my opinion you may try this and if it worked search alternative fix... but you know the problem.
if not try it you dont know if the thermal libs can solve your issue.
yopu try with other chargers... but with other cable???
Click to expand...
Click to collapse
I need to have twrp to flash it right? Can you link me "Agni kernel with alternative thermal libs" for Redmi note 3 and also, I can just directly flash it on my custom ROM?
I did try it with a lot of other cables too, same issue.
If you use Official this is the correct version https://forum.xda-developers.com/re...nel-24-09-2016-agni-puremiui-mm-v1-4-t3468042
You need a recovery
This is the new refined home for DarkRoom Development. If you submit bug reports without a log, you may be prosecuted...or executed.
Disclaimer:
If your device fails to comply with your standards of what you consider functioning, I am not liable. This is provided free of charge and does not come with a warranty. Although, if you provide a log, I can provide some sort of assurance that I will look into your issue.
Links:
Social:
Telegram - https://t.me/darkroomdev
Discord - https://discord.gg/BGTFutW
Downloads:
https://drive.google.com/open?id=1SLC6A4RvTE_yYF_u6GMKU_q7lvX3YCFB
Source:
Github – https://github.com/DespairFactor/
Credits:
Google
Will this kernel improve battery life??
Any info on what it would do to the phone will be helpful enough I guess.
Any information at all?
I've installed this kernel and I can confirm a 50% increase in performance and 75-80% increase in battery. Dev is amazing.
Ram management fixed?
33HdA said:
Any info on what it would do to the phone will be helpful enough I guess.
Click to expand...
Click to collapse
troby86 said:
Any information at all?
Click to expand...
Click to collapse
Agreed
Installer, keeping tabs with better battery stats, drain per hour is anywhere between 25-50% better depending on my usage that day. Went from 10-12% drain (even when idle) to 4-7%.
Absolutely amazing.
Any info on the kernel features? how to flash?
Sorry brother thats a little hard to believe.
Chronzy said:
I've installed this kernel and I can confirm a 50% increase in performance and 75-80% increase in battery. Dev is amazing.
Click to expand...
Click to collapse
varun.gid said:
Any info on the kernel features? how to flash?
Click to expand...
Click to collapse
No info on the kernel but I believe they have released kernels for past Pixel phones.
To flash you need to boot to twrp and flash the zip.
Sent from my Pixel 3 using Tapatalk
Anyone tried this? How's the performance and battery?
Chronzy said:
I've installed this kernel and I can confirm a 50% increase in performance and 75-80% increase in battery. Dev is amazing.
Click to expand...
Click to collapse
Do provide proof for this, please.
Flash post or pre magisk?
3 releases on November 7th?
Presume r2 is latest logically?
Seems like all discussion is in xl forum
Flashed r2 and looking great.
Flashed the kernel with ex. Then did the magisk reflash as per dev. Recommends ?
Here is info about what's different in this from stock
https://forum.xda-developers.com/showpost.php?p=78120966&postcount=37
frewys said:
Flashed r2 and looking great.
Flashed the kernel with ex. Then did the magisk reflash as per dev. Recommends
Click to expand...
Click to collapse
how the battery life improve especially on stand by?
R4 is up
varun.gid said:
how the battery life improve especially on stand by?
Click to expand...
Click to collapse
Was a busy day and haven't done much real measuring more of a feeling so far that there is a sense of improvement on both sot and standby ?
Hi why in every custom roms while playing games it doesn't charge? Instead it discharge I know devs make this to prevent overheating but anyway to bypass it? Miui doesn't have this I don't care about my battery I just want to play and charge at the same time. Thanks!
And yea Don't say I go back to miui I just want answers if it possible to disable that limitation
install any unthermal mod like morpho+chrysalis mod, search on telegram "morpho releases"
eLaDiio said:
install any unthermal mod like morpho+chrysalis mod, search on telegram "morpho releases"
Click to expand...
Click to collapse
What does it do?thanks
Edit:
I've read about it this is what I need thanks a lot!
t0per666 said:
What does it do?thanks
Click to expand...
Click to collapse
The reason of your doesn't charge when you are playing is bcoz a heat issue on the battery, disabling the thermal protection by software, allow you have temperatures more higher without blocking the pass of electricity of your charger to your phone, obviously if you reach a certain temperature even with this mod you can't charge and play in the same time, this you can't avoid