Android Open Source Project android-10.0.0_r33
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
YOU WILL NEED AN UNLOCKED BOOTLOADED
[URL="https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/"]https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/[/URL]
Code:
FLASH VENDOR IMAGE TO YOUR DEVICE FIRST
[URL="https://developer.sony.com/file/download/software-binaries-for-aosp-android-10-0-kernel-4-14-yoshino/"]https://developer.sony.com/file/download/software-binaries-for-aosp-android-10-0-kernel-4-14-yoshino/[/URL]
1) Unpack the vendor zip file to obtain the vendor image:
unzip SW_binaries_for_Xperia_Android_<release version>_<platform>.zip
2) Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
3) Flash the vendor image by entering the following commands in a terminal window:
fastboot flash oem SW_binaries_for_Xperia_Android_<release version>_<platform>.img
Download
aosp_g8341-ota-eng.ugoraffaele.zip
Credits
Sony Xperia Developer World
XDA:DevDB Information
[XZ1 - G8341][AOSP][Android 10] Android Open Source Project, ROM for the Sony Xperia XZ1
Contributors
hackS1GN
Source Code: https://github.com/sonyxperiadev/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Testing
Created 2020-05-10
Last Updated 2020-05-10
Good job, I'll try testing
Thank you for the rom. Which camera app works with this rom? Please advise (the stock camera and gcam from playstore don't work).
MOD EDIT: Quote of OP removed due to readabilityWill it work with the double sim version G8342
Sent from my G8342 using Tapatalk
wifi disconnects after connected until restart
camera doesn't open
some apps crash
some apks don't install
there is strange slowness in screen animation
developer options don't open
sound is very goog and loud
system freezes a lot
sometimes system boots faster than any rom
sometimes doesnt boot and stuck at android logo
the only amazing feature it has is that fingerprint sensor works with only simple touch not pressing power button while screen is off and screen opens very fast:good::good::good::good:
keyboard crashes
phone doesnt turn off but restarts
i think there are more bugs
can the vendor and boot be used for another GSI system.img ?
starvirus10 said:
can the vendor and boot be used for another GSI system.img ?
Click to expand...
Click to collapse
I don't know
hsheemi said:
wifi disconnects after connected until restart
camera doesn't open
some apps crash
some apks don't install
there is strange slowness in screen animation
developer options don't open
sound is very goog and loud
system freezes a lot
sometimes system boots faster than any rom
sometimes doesnt boot and stuck at android logo
the only amazing feature it has is that fingerprint sensor works with only simple touch not pressing power button while screen is off and screen opens very fast:good::good::good::good:
keyboard crashes
phone doesnt turn off but restarts
i think there are more bugs
Click to expand...
Click to collapse
I also experienced the same problem.
For some reason this ROM is similar to the problems encountered in pixel experience rom
I also experienced a problem with TWRP after installing this ROM. TWRP stopped completely and just stopped in the TWRP logo.
A little sad because it does not have a personal PC for flashing again
Hopefully the developer fixes this ROM to match performance. ROM with base STOCK Sony
starvirus10 said:
I also experienced the same problem.
For some reason this ROM is similar to the problems encountered in pixel experience rom
I also experienced a problem with TWRP after installing this ROM. TWRP stopped completely and just stopped in the TWRP logo.
A little sad because it does not have a personal PC for flashing again
Hopefully the developer fixes this ROM to match performance. ROM with base STOCK Sony
Click to expand...
Click to collapse
you can't return to any rom until flash stock and twrp again, i faced difficulty turning off phone but managed by pressing the power and two volume buttons together for five seconds or more until phone vibrated three times, then turned off.
Hi guys, thank you all for your feedbacks!
I am trying to fix everything, but there is a lot of work needed. Tons of compilation warnings (opposed to Lineage OS, which was close to none) and bugs.
hackS1GN said:
Hi guys, thank you all for your feedbacks!
I am trying to fix everything, but there is a lot of work needed. Tons of compilation warnings (opposed to Lineage OS, which was close to none) and bugs.
Click to expand...
Click to collapse
Myself5 said that fingerprint sensor is a bug and uses much battery
hsheemi said:
Myself5 said that fingerprint sensor is a bug and uses much battery
Click to expand...
Click to collapse
if normally the sensors function together when pressing power. now the fingerprint sensor is forced to keep on without having to press the power button
that is why it is wasteful of power used
---------- Post added at 08:06 PM ---------- Previous post was at 07:49 PM ----------
hackS1GN said:
Hi guys, thank you all for your feedbacks!
I am trying to fix everything, but there is a lot of work needed. Tons of compilation warnings (opposed to Lineage OS, which was close to none) and bugs.
Click to expand...
Click to collapse
Thank you for your hard work : D
I hope the problem is resolved soon.
I forgot to say, because the camera doesn't work.
there is a possibility this bug will exist in this rom.
The camera focus will switch to macro before the photo is taken . in all AOSP ROMs that I tried to find that
sorry if my English is bad , I use auto translate
Hello! Someone have some infos about this ROM? bugs? development? Thanks.
Tux111 said:
Hello! Someone have some infos about this ROM? bugs? development? Thanks.
Click to expand...
Click to collapse
I guess this is one of the thousands of roms that only get one build or we waiting for the new binaries
jimmy1235 said:
waiting for the new binaries
Click to expand...
Click to collapse
Which binaries you mean? Sony released updated binaries for the XZ1!
https://www.xda-developers.com/sony-xperia-10-ii-added-open-devices-program/
Sony has also refreshed the software binaries for the Xperia XZ1
Click to expand...
Click to collapse
Dead , right?
Is this ROM already active raw?
jimmy1235 said:
I guess this is one of the thousands of roms that only get one build
Click to expand...
Click to collapse
Check out this new ROM: https://forum.xda-developers.com/xperia-xz1/development/rom-iodeos-lineageos-17-1-microg-t4129997
Related
DISCONTINUED DUE TO LOWER PERFORAMNCE THAN LEGACY!!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
EVERY AND ALL REPORTS OF BUGS WITHOUT LOGS WILL BE IGNORED. DO NOT POST WITHOUT LOGS BECAUSE NOTHING WILL BE SOLVED. THANKS. I CAN'T DO WITCHCRAFT.
What's working :
Booting
RIL and Mobile Data (Should work for Dual-Sim also) !!! SOMEONE CONFIRM
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Camera
Browser
Autoselecting your phone based on your MODEM partition
BATTERYLIFE SHOULD BE CRAAAAZYYYY
What's not working :
Video playback
Fm Radio
NFC (I never used it and it is a pain to separate from other versions other than P710)
Other things might be broken please report with logs
Instructions :
Reboot to recovery
Make a full wipe (/system, /data, /cache, /dalvik-cache)
Flash the CM11 zip
Flash Gapps (if you want)
Make factory reset
Reboot to system
Downloads :
ROM:
Older versions:
cm-11-20160222-UNOFFICIAL-vee7-RC1.zip
md5: abe9b3aaa42a3e8dd6f9bdd96bdb02c3
cm-11-20160222-UNOFFICIAL-vee7-RC2.zip
md5: 5dafd54589f603b43780bee5a5d134da
GAPPS:
pa_gapps-modular-nano-4.4.4-20150308-signed.zip
If you really appreciate my work on the L7 II series please consider getting me a coffee right now
Credits :
@Caio99BR
chil360
Y300 Team
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
XDA:DevDB Information
CM11 vee7 CAF, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CM
Version Information
Status: Stable
Created 2016-02-22
Last Updated 2016-02-22
Reserved
Changelog :
22.02.2016 ---> Initial Release RC1
You have the bugs and what is working in the first post
24.02.2016 ---> RC2
overclocked cpu
added governors
added hardware monitoring for battery
probably fixed dual sim
Reserved
Wow! This so fast. hahaha!
I have P716 and I will flash then as soon as I download it.
'll test and post the feedback. If you need some test of roms for dual sim devices you can ask me.
Anyway thank's for your efforts for our device.
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
What is CAF? How is it different from normal and your previous cm11 build.
XDA-00 said:
What is CAF? How is it different from normal and your previous cm11 build.
Click to expand...
Click to collapse
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
shhnedo said:
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
Click to expand...
Click to collapse
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
XDA-00 said:
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
Click to expand...
Click to collapse
Something along those lines, yes.
Sorry i don't understand one thing, to flash this rom, and Also your cm12-13, i have to use twrp3 or can I use my old cwm, the old no-touch version? Sorry for my bad english
MustangBR said:
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
Click to expand...
Click to collapse
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
shhnedo said:
Something along those lines, yes.
Click to expand...
Click to collapse
Great!
Its strange for me TWRP 3x recovery writes during installation about "unable to mount system on block 14 and data on block 20 device is busy".Nothing wrong,just strange.
First bug just on first start,setup wizard "unfortunatelly stopped" after lang selection,with or without SIM and all.Maybe reason is i am flashing not provided gApps pack but just micro[dont need lots of junk in /system]. Logcat named xD is in attached RAR.May be You will see what went wrong,sir.
Flashed without gApps,first start is working well=) .BTW if i install that micro gApps after first start,evth is fine.
Then,about camera.While focusing camera app crushes,the same was on Weritos CM with his videorecording fix.Logcat named camera attached[not filtered by error type and thats why too large,sorry].
Gonna test and look now,what else can I see.
Okay,turned developer settings ON,setted all animations to 0.5x,seems all works well on my 713.
And a question,will ART work better than Dalvik?
neutrondev said:
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
Click to expand...
Click to collapse
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
MustangBR said:
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
Click to expand...
Click to collapse
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
And can i ask to add Smartass Governor to kernel?
DS_katauri said:
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
Click to expand...
Click to collapse
Will add governors and Hardware monitor of battery sure.
neutrondev said:
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Click to expand...
Click to collapse
No way.
Now when to open dialer app this is crashes. The same occurs when trying to configure and activate simcard in configurations he crashes.
Also now show only one sim card symbol on the top bar of the screen, before this command appeared two.
I confirm all @DS_katauri has written. I noted the same things. + sometimes after pressing the power button to block screen and press it again to unblock screem takes several seconds with black screen until to show the screen.
GPS(included navigation mode), camera, wifi, sensors, usb, sound,video, browsers are fine, batterylife is unbelievable, very good.
Not a ROM bug,i forget to use some autostarts manager and disable sync=)
Seems ROM is stable,no reboots for night.Just damn gApps.
@MustangBR
Try the new version. Clean flash. Tell me if Dual Sim works.
@DS_katauri
Overclocked CPU and governors are there.
Also battery is monitored with kernel interface now.
Hello partners!!!
Here we share the functional rom last for our MaX2!
At the request of many colleagues, I created this CM13 based on 29 September.
And adding the entire S19 firmware to have it fully updated and upgraded.
Fully functional quick and steady myself I was surprised with the performance tests ... 143,000 AnTuTu with hot enough to test mobile Cold believe can draw record numbers ...
To say that I still have problems with slow motion ....
I'm starting to not know where mistakes can be ....
Libs I managed to trace the entire structure of the official EUI and still does not work ....
Permits revised from top to bottom ...
Libs mother and CM13 ... zilch ...
Perhaps there may be something in the kernel (boot) but there are limited ...
As I change anything to do directly test the ROM does not start or comes into infinite loops ....
So ... I leave the rom completely finished but with 2 bugs.
And each user knows what he wants or what you need.
But the ROM is fully functional for day to day and is really fast and stable.
BUGS:
1 Slowmotion nonfunctional. The rest of the camera is fully functional with 21mpxl.
2nd nonfunctional IRDA. (With this ... if not roms stocks moment ... little we can do ...)
The first!!!! IMPORTANT
We do not force anyone has use or install the rom.
We do not make yourself responsible for possible errors or brik the terminal.
We simply share our work for all so that we can have the terminal in our language.
RoM CM13
CM13 based official of the day 29/09/2016
s19 official firmware with all its libs + kernel.
Rom eliminated completely stock only apks that created conflict with our terminal.
Doze functional.
Sound perfect.
wiffi
BT
Integrated Pico gapps
Some improvements in the build.prop
Installation Method
We have created a zip FULL.
ROM contains firmware s19 + recovery + 5.8 everything necessary for you to come firmware do not have problems to come and stay all properly installed and running smoothly or silly scares.
* Download rom.
* Enter the zip rom on your terminal.
* Restart recovery.
* Since the recovery to the wipes.
* Once the wipes, select the zip and install.
* Once installation is complete, restart System.
* Wait for the rom you first start, it takes a few minutes not alarmed.
downloads TeaMSpaiN
CM13 ROM S19: https://mega.nz/#!SwIHSB7C!rFQJsQxx-J-RI121GWsaC6DAhDkLHzJdDPvdVabZRRY
Your comments on this rom.
And if you find any bug report to try to fix them.
Greetings comrades!
DONATE PAYPAL: https://www.paypal.me/ParasiteYgaseOso
thanks for sharing this
Sent from my Le X821 using XDA-Developers mobile app
Thank you! I will try this rom.
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
ArctiX said:
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
meangreenie said:
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
Click to expand...
Click to collapse
Thanks, that worked
Thanks for your work! Does Camera API 2 work this time?
I flashed this rom today. Everything works well for me!
wiped system and dirty flashed from previous cm13 and it seems to be running very well
Nice, smooth, we will see battery performance compared to Mokee.
- Camera2 api doesnt work
- Slowmotion doesnt work
- IR doesnt work
- For me, missing Aegis app from Mokee is a big step back
Sent from my Le X820 using Tapatalk
@ParasiTe_RemiX Did you build this from source or port from another device?
Beautiful ROM, but for me in Japan for some reason LTE is not working, I can get only HSPA. This is strange because in the stock eui I can use LTE no problem.
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
ArctiX said:
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
Click to expand...
Click to collapse
For the hardware buttons backlight, you can turn them off in settings/buttons or you can turn the brightness of them right down, via editing the max_brightness file.(can't remember the path name atm, but can easily google)
For the charging light, you can turn the charging light off in settings/display. The options for them don't seem to work unfortunately.
When I plugged my phone to the computer I noticed a blank file with no name and hard disk icon on my sd card, when I tried to delete it, it wiped my whole sd card! don't delete that file if you see it.
Hello, This ROM is also compatible with the version Le Max 2 Pro?
pickmod said:
Hello, This ROM is also compatible with the version Le Max 2 Pro?
Click to expand...
Click to collapse
No, you can't flash it for X620!
bahuy2003 said:
No, you can't flash it for X620!
Click to expand...
Click to collapse
I have Le Max 2 Pro X820... it is compatible?
Thank you, looks really production quality
This is extremely close to what I wanted from this device: Straighforward CM13 (ok, I'll want CM14 next), no bloat, functional and fast.
Also rooted, which means I control my device, not some vendor who wanted my money but fails to cede the control over what he sold.
And most importantly: No longer any of these Chinese apps, which refused to get uninstalled while they claimed about any privilege Android can provide.
I sure hope security patches will be coming for years as the device looks powerful enough to last a long time.
Only bug I've found so far is apps like Hangouts and Duo can't access the Camera for video calls. Apart from that, flawless so far.
LineageOS 14.1 for the Samsung Galaxy A3 2016
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Home + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
LineageOS team
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy A Series
Contributors
aapav01
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-04-09
Last Updated 2017-04-16
Reserved
Bug LIST:
NOT KNOWN may have many bugs <not tested as i dont have the Device>
Downloads
Downloads
20170409 build 1 : removed getting a new build
20170416 build 2: Click Here
Report bug with LOGs only please !!
This....Doesn't boot whatsoever. Maybe remove the download link until you have a verifiably bootable build.
Yes not boot, it is blocked on boot logo.
Edit :
it Booted with edited ini.environ.rc
Sim card work, but not data
patrickjquinn said:
This....Doesn't boot whatsoever. Maybe remove the download link until you have a verifiably bootable build.
Click to expand...
Click to collapse
Really? Why not provide a log instead of being ungrateful that someone that don't even have this model are trying? How you suggest he will get it booted without help?
Grow up.
tys0n said:
Really? Why not provide a log instead of being ungrateful that someone that don't even have this model are trying? How you suggest he will get it booted without help?
Click to expand...
Click to collapse
You're really picking a bad day to come at me. Basically its hard to get a damn log when it failed to get past the bootloader. Also he stated that he doesnt have the device and therefore can not verify that it works at all. I simply made the suggestion that he remove the link until one of us can verify that it works otherwise you'll have a deluge of people installing this and soft bricking their phone followed by a million and one complaints.
What is it with XDA, its become worse than YouTube comment sections.
patrickjquinn said:
You're really picking a bad day to come at me. Basically its hard to get a damn log when it failed to get past the bootloader. Also he stated that he doesnt have the device and therefore can not verify that it works at all. I simply made the suggestion that he remove the link until one of us can verify that it works otherwise you'll have a deluge of people installing this and soft bricking their phone followed by a million and one complaints.
What is it with XDA, its become worse than YouTube comment sections.
Click to expand...
Click to collapse
You got a point to what you're saying. Maybe I missread the reason to why the link should be removed.
I'd say let the link be here. Don't attempt to flash if you don't know how to recover from a soft brick.
Anyway. I'll try to get some kernel logs when I get home, if I got the time.
I made a boot.img that boots and detects sim but no mobile data/text messaging etc.
Thanks for the port, but there is a wakelock bug
(sorry, i don't have logs)
Patched build with boot.img by Kqdi + small changes in ramdisk: https://drive.google.com/file/d/0B6vI9V6s4jvbRWhreWZUNkk1Sk0/view?usp=sharing
alexax66 said:
Patched build with boot.img by Kqdi + small changes in ramdisk: https://drive.google.com/file/d/0B6vI9V6s4jvbRWhreWZUNkk1Sk0/view?usp=sharing
Click to expand...
Click to collapse
what small changes
Kqdi said:
what small changes
Click to expand...
Click to collapse
- remove some stuff for supersu
- add support for swap (sswap) for better performance (we have 1,5 RAM only)
any solutions or ideas for fixing the problem with mobile internet/gprs ?
i dont want to be annoying, im just extremely curious
if i can help, msg me
i have no life, therefore i have always time to do stuff
richiM said:
any solutions or ideas for fixing the problem with mobile internet/gprs ?
i dont want to be annoying, im just extremely curious
if i can help, msg me
i have no life, therefore i have always time to do stuff
Click to expand...
Click to collapse
Send logs for help @aapav01 (locat and dmesg)
Use SysLog if you don't know how do it
Sorry I don't have logs. I tried the patched one real quick but unfortunatly I need my phone to be working for the moment.
I'd still like to share what I did try. Maybe someone else got more time to log it.
Sim card gets detected and APN is there. It finds my carrier, but can't get signal.
Bluetooth connected to computer, but failed on filetransfer. No crash, only defauld notification that transfer failed.
Wifi worked but I got very slow connection. (Could be any reason and may not be because of rom.)
ADB seems to work and also mtp.
Camera worked for pictures, but failed to connect to camera when I tried to record.
Phone can't wake up screen if it's been laying with screen off for some time.
That's about what I had time to try. Other than that it felt fluent, so thanks!
Here's my logs: https://drive.google.com/open?id=0B3Crq630YX4zNDVuUy1GMk02TkE
1) My dialer doesnt work, it freeeze when launching, but after the 3rd try, i skipped google setting in the beginning and it works.
2)No mobile network, only emergency calls for 1 sim and no sim for the second slot ( i tried mobile fix but it didn't changed anything)
3) Power off charging - freeeze and only hard reboot (vol down + power for 10 seconds helps)
4) camera - described above
5) Didn't have time to check phone wake up after sleeep, also the same with bluetooth
6) My wi-fi connection is ok
7) UI lagging
Hope it will help you a little
Vittario Vicci said:
Here's my logs: https://drive.google.com/open?id=0B3Crq630YX4zNDVuUy1GMk02TkE
1) My dialer doesnt work, it freeeze when launching, but after the 3rd try, i skipped google setting in the beginning and it works.
2)No mobile network, only emergency calls for 1 sim and no sim for the second slot ( i tried mobile fix but it didn't changed anything)
3) Power off charging - freeeze and only hard reboot (vol down + power for 10 seconds helps)
4) camera - described above
5) Didn't have time to check phone wake up after sleeep, also the same with bluetooth
6) My wi-fi connection is ok
7) UI lagging
Hope it will help you a little
Click to expand...
Click to collapse
This rom is for A310F/Y/M so no A310FD Thats why the 2nd sim isn't working
Kqdi said:
This rom is for A310F/Y/M so no A310FD Thats why the 2nd sim isn't working
Click to expand...
Click to collapse
My phone is A310F......
View attachment 4109028
Vittario Vicci said:
My phone is A310F......
View attachment 4109028
Click to expand...
Click to collapse
thats not a slot for a second sim, but one for a microSD
whats wrong with you lol
EUI 6.1 FINAL
6.1.712S_FKXOSOP617120407S
This is a stable release of the EUI 6.
Maximally close to the firmware, without any extraneous services and applications.
The main thing in this build:
- SMS Messenger from LeEco. Now fully work.
- The Contacts application is cured of an editing error
- Removed Google's analogs (sms, music, calendar)
- Build white (white bootanimation and splash screen)
- A compromise is found between performance and overheating
- more Russian
This build is the final release.
Installation is simple:
- maximum possible cleaning
- Installation via TWRP
- Magisk is put automatically
Reboot and configure.
The firmware is optimized within an hour.
Download links:
EUI 6.1.712S FINAL
- final release
GoogleDrive
EUI 6.0.617S ST2
- more bugfixes
is no longer available
EUI 6.0.617S RC3 ST
is no longer available
P.S. Who has a problem with the focus of the camera, this build also does not have its solution.
In build only 3 full languages:
English, Russian, Chinese
Important!
This is a fully saved port from the x850.
All EUI functional are presented in the form in which he got from the test build!
Only Fixed some issue.
It's RU build as the basis.
Working All and working fine.
The information below is part of the story. It is no longer relevant when installing and using the final release.
advantages of our build:
- we do not steal other people's works
- do not castrate the original system
- no blue diode
- there is Vulkan API
- correct and logical operation of the processor
- do not add strange software
- and we know how to do better without stealing
- and many many others!
EUI 6.0.617T port from X850
Installation:
Download the zip(s)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash ROM
Install Magisk (if you need)
Reboot
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
In build only 3 full languages:
English, Russian, Chinese
Now LeEco servers didn't work, but you may skip enter in you Account during Setup Wizard.
In this build work FP and most functions EUI, but online LeEco services didn't work (may be now, may be forever).
Important warnings for use:
//Never turn on this function!//
Otherwise, you will receive a reboot of the device instead of an incoming call. (this bug from x850)
//This function didn't work too//
When you turn on nothing will not happen, but the battery consumption will increase slightly
//After any reboot, wait up to 2-3 minutes. This will help avoid rebooting again.//
Tips and Tricks in second post later
Download:
- is no longer available
Contributors:
prsapphire
Kirich_Kumchenko
and LeEco
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: EUI 6
Version Information
Status: Final
Created 2018-01-05
Last Updated 2018-07-13
Already normally did not eat and did not sleep more than a month. Would you like to support my work, it would be nice. :laugh:
Not needed!!!
* Dolby Atmos work only with Magisk
If you want it, install this module:
download
*In build including Vulkan API drivers
cool thanks for your work
Everything is working? Thanks!
F*** yeah I have tried Eui 6.0 on Le Max 2 and it's great. Excellent thanks I'll try this out.
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
allrockedout said:
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
Click to expand...
Click to collapse
Read first post, if you do how in recommendation, your problems did not occur
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
Click to expand...
Click to collapse
prsapphire said:
Read first post, if you do how in recommendation, your problems did not occur
Click to expand...
Click to collapse
Yes I read it. I'm in system now will do more testing thanks
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
allrockedout said:
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
Click to expand...
Click to collapse
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
prsapphire said:
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
Click to expand...
Click to collapse
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
kihope12 said:
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
Click to expand...
Click to collapse
Read the post, all inside.
About other lng, I didn't plan added more.
prsapphire said:
Read the post, all inside.
About other lng, I didn't plan added more.
Click to expand...
Click to collapse
But i cant found any info about working non working things, only about FP
Does everything work on it ?
I will give a try and give you feedback.
3 dot in circle notification is back again. Any way to trick the system to show the correct icon of the app that sends the notification?
Rear Camera doesn't work, fingerprints works but slow, lag fixed, battery is bad, 50% to 5% in 4hours without turning screen on.
Anw thank devs very much.
does it lag like the previous eui 6 rom?
If you are on eui 6 alpha, you needn't wipe anything before rom installation
Devanshu Biswas said:
does it lag like the previous eui 6 rom?
Click to expand...
Click to collapse
Lag fixed
Everything is working?
roushankumarsharma said:
Everything is working?
Click to expand...
Click to collapse
Reading is the Secret instead of asking the same question multiple times. [email protected]
PixelPie 1.0 -By Team Pixel
Hey Everyone!PixelPie is a custom firmware that ports almost all of the features from a Pixel Device to a Samsung Firmware. This build has been based on the Pixel 3XL. It has been very deeply debloated and optimized for performance, whilst also bringing in many Pixel Features to our devices. It has also undergone a beta test ring, so most if not all of the listed features should be working! Here is a feature list:
Features:
1. AdAway
2. Google Calculator
3. Google Calendar
4. GCam arnova
5. Samsung Stock Camera with Massive HDR parameter changes, while also debloated
6. Google Chrome
6.1. rom works fast
7. Google Clock
8. Google Contacts
9. Google Files GO (File Manager)
10. Samsung Gallery (Stripped Down and lightened to improve performance)
11. GPay (Working Payment Method along with NFC functionality)
12. Google Keep (With Handwriting Libs)
13. Google Lens (Bixby Visions Alternative but works within Google Photos and Pixel Recents)
14. Magisk 19.0 Prebuilt (No Need For Seperate Flash)
15. Google Messages
16. Mtweaks 14.0 (Has GPU Control)
17. Eleven Music (Lineage OS 15.1)
18. Google Phone (Ported Framework for full functionality)
19. Google Photos (Warning: it upload in original quality because it thinks it is a Pixel)
20. Google Play Games
21. Settings debloated, along with framework
22. App Lock (Settings)
23. SystemUI Tuner (Updated)
24. Google Tasks
25. YouTube Vanced
26. Correctly Scaled Pixel Boot Animation (Pixel 2XL)
27. Google Sounds, animations, framework and configs.
28. Pixel Launcher with new gesture navigation and recents menu (Not Pill Navigation)
29. Digital Wellbeing
30. Dolby Atmos (With Gaming Mode) with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
31. GBoard and New Pie Emojis (Not Samsung Ones)
32. Incredibly Deep Debloat and DeKnoxed (Same as last time for performance and battery improvements)
33. VoLTE Supported
34. Pixel 3 Live Wallpapers with Normal Wallpapers too.
Bugs: NONE
Notes:
1. RAM management when fresh installed idles around 3.5 Free on 6gb note 9
2. ROM Size has fallen to small size from Stock size
3. Device Maintenance swapped for Files GO and SystemUI Tuner. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
5. Make sure you set Google Dialer as your default phone app. Goto Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
6. After first boot, reboot your device once.
7. Substratum does still work, just remember to get Samsung Substratum themes. -----IF ROM Support Substratum include-----
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTALL INSTRUCTIONS:
1. Download the zip
2. Wipe System, Data, Dalvik and Cache
3. Flash the zip
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Final Notes, Download Link and Sources:
Feel free to message me on telegram via the group: <Mod Removed>
Download Link 1.0: <Mod Removed>
Mirror Link 1.0 : <Mod Removed>
Kernel Source : http://opensource.samsung.com/reception.do
Credits:
@Skulldron and the entire Pixel Team
Samsung for their amazing device
Augustin for building the ROM
Check out the rom
samsung spen works
samsung health works
samsung gear works
includes gcam and samsung camera
https://imgur.com/a/DLbK8MG
pictures of rom
A new rom yay!!! Right now it's 12:30am here so I'll be downloading overnight and will be flashing the rom after morning ?? Thank you so much, can't wait to try it out!!
Awesome news..... Sound really interesting.. thank you for the new rom here in N9 section. Will flash it soon.
Does anyone has tested this ROM?
cool! Another Rom for our beloved NOTE 9.
Tried installing this, there is something wrong when setting up. Firstly on set up google does not recognise my old pin anymore after flashing. Tried a pincode less back up and that worked. Afterwards when further installing, it keeps asking for a fingerprint but you need to set it uo with a password. Password will get set up the first time and never get recognised again. After trying to set up and tried rebooting the phone screen keeps flickering on the unlock screen.
Hi xXpixelpieXx, please share rom thru Mega pls. Google Drive is too slow in my country.
Amazing news
Sent from my [device_name] using XDA-Developers Legacy app
Downloading Rom, can't wait to try it out!
so i flashed it today (twice) and after a phone restart i get the message "only official released binaries are allowed to be flashed" so i have to restore my phone from odin then restore from twrp. First time it happened i restarted after titanium backup and the second time i restarted after putting my email in the setup wizard.... please fix
wenjie1234 said:
Downloading Rom, can't wait to try it out!
Click to expand...
Click to collapse
good
karapoutsoglou said:
Amazing news
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes
eabrillos said:
Hi xXpixelpieXx, please share rom thru Mega pls. Google Drive is too slow in my country.
Click to expand...
Click to collapse
im uploading to mega check mirror link in op in 5 minutes
bartjeh1991 said:
Tried installing this, there is something wrong when setting up. Firstly on set up google does not recognise my old pin anymore after flashing. Tried a pincode less back up and that worked. Afterwards when further installing, it keeps asking for a fingerprint but you need to set it uo with a password. Password will get set up the first time and never get recognised again. After trying to set up and tried rebooting the phone screen keeps flickering on the unlock screen.
Click to expand...
Click to collapse
to skip fingerprint at setup: press the arrow back 1 time thats it?
osk4rin said:
Does anyone has tested this ROM?
cool! Another Rom for our beloved NOTE 9.
Click to expand...
Click to collapse
yes good rom
dsg2003 said:
Awesome news..... Sound really interesting.. thank you for the new rom here in N9 section. Will flash it soon.
Click to expand...
Click to collapse
please try it and give honest review also
Supracer said:
A new rom yay!!! Right now it's 12:30am here so I'll be downloading overnight and will be flashing the rom after morning ? Thank you so much, can't wait to try it out!!
Click to expand...
Click to collapse
good
Supracer said:
so i flashed it today (twice) and after a phone restart i get the message "only official released binaries are allowed to be flashed" so i have to restore my phone from odin then restore from twrp. First time it happened i restarted after titanium backup and the second time i restarted after putting my email in the setup wizard.... please fix
Click to expand...
Click to collapse
flash oreo bootloader and flash the rom again i have this every time i use pie bootloader just flash oreo bootloader it is because the bootloader for pie is not good and it contains problems.
https://androidfilehost.com/?fid=1395089523397887521
flash this in twrp to get oreo bl and then flash this rom and no more problem.
xXPIXELPIEXx said:
good
yes
im uploading to mega check mirror link in op in 5 minutes
to skip fingerprint at setup: press the arrow back 1 time thats it?
yes good rom
please try it and give honest review also
good
Click to expand...
Click to collapse
After setting up a password the phone wont recognise the password anymore. So if you reboot you cant use your phone anymore.... Also the screen starts flickering after the reboot. So you cant even enter anything...
Ok this is the 3rd time and I'm done trying for now... Sorry bro I really wished everything worked perfectly but after finishing up the setup wizard, I restarted my phone and I can't go past the lockscreen.... the screen is on loop (comes up for 1 sec and turns off for 10) and that's without restoring any apps.
xXPIXELPIEXx said:
flash oreo bootloader and flash the rom again i have this every time i use pie bootloader just flash oreo bootloader it is because the bootloader for pie is not good and it contains problems.
https://androidfilehost.com/?fid=1395089523397887521
flash this in twrp to get oreo bl and then flash this rom and no more problem.
Click to expand...
Click to collapse
how to restart phone if i have this error? i cnat reboot to twrp or odin mode. help pls
Used the ROM for quite a while and it's good. The only problem is that I cannot use anything to lock my phone. Fingerprint, face, iris or even the basic ones like pattern, password or pin. Everything just fail. Even you set-up pattern, it doesn't work
Supracer said:
Ok this is the 3rd time and I'm done trying for now... Sorry bro I really wished everything worked perfectly but after finishing up the setup wizard, I restarted my phone and I can't go past the lockscreen.... the screen is on loop (comes up for 1 sec and turns off for 10) and that's without restoring any apps.
Click to expand...
Click to collapse
ok hope u will consider our rom another time
peppect91 said:
how to restart phone if i have this error? i cnat reboot to twrp or odin mode. help pls
Click to expand...
Click to collapse
kindly flash stock rom if you dont know how to solve this :laugh: i post fix right above you :silly:
wenjie1234 said:
Used the ROM for quite a while and it's good. The only problem is that I cannot use anything to lock my phone. Fingerprint, face, iris or even the basic ones like pattern, password or pin. Everything just fail. Even you set-up pattern, it doesn't work
Click to expand...
Click to collapse
works fine for me i will investigate the bug
boys dont use fingerprint sensor or security settings press not now and continue setup press back arrow if you get the fingerprint sensor screen if you want security put pin on your sim card which will lock instantly every time you reboot :good:
https://forum.xda-developers.com/ga...tom-romers-t3923647/post79387468#post79387468
tips so everyone can avoid bugs on roms
peppect91 said:
how to restart phone if i have this error? i cnat reboot to twrp or odin mode. help pls
Click to expand...
Click to collapse
please help us we can't reboot to join in to twrp or odin mode please help
---------- Post added at 04:11 PM ---------- Previous post was at 03:55 PM ----------
after flashed your rom my phone is break please help .