Related
I have tried the same steps in the video here
http://www.youtube.com/watch?v=CwUPYHnOIQU
Basically with the power plugged into the tablet multi touch is perfect. but without the power adapter plugged in there are issues, which you will see in my video. Its hard to explain. But i've had this issue on Calkulins+Clems v4 and Vegan 5.1.1
Please could someone also test this to see if its just my tablet, this way I know i need to send it back to viewsonic for a replacement while its under warranty.
Any help is appreciated.
Using BC and seem the same behavior - the "Fix Me" re calibration app does not help but I was unaware of the plug in fix.
Hi,
in our warehouse I use the Galaxy Wifi 4.0 with a Motorola RS507 bluetoothscanner for orderpicking.
I have 10 of them all working without any problem. Now I needed 10 more, but the 4.0 is replaced by the 4.2. So I bought them instead.
But I cannot get the scanners working with this device.
If I want to connect the scanner I get the message:
Confirm passkey is xxxxxx to pair with RS507 1234
I can press "Accept" or "Decline"
When I press "Accept", it says "paired" but I cannot use the device.Also the device give no confirmation sound that it is connected.
On all the other devices (Wifi 4.0, Galaxy S, Lenovo A1 Tablet) I get the message:
Confirm password to pair with "RS507 1234"
Then I only have to press Accept and the device is paired and working.
Does anyone have a similar problem with another bluetooth device and knows a solution how I can connect the scanner?
If it will not work I have to look around for the old Galaxy Wifi 4.0.
Thanks for your help.
kiteman76 said:
Hi,
in our warehouse I use the Galaxy Wifi 4.0 with a Motorola RS507 bluetoothscanner for orderpicking.
I have 10 of them all working without any problem. Now I needed 10 more, but the 4.0 is replaced by the 4.2. So I bought them instead.
But I cannot get the scanners working with this device.
If I want to connect the scanner I get the message:
Confirm passkey is xxxxxx to pair with RS507 1234
I can press "Accept" or "Decline"
When I press "Accept", it says "paired" but I cannot use the device.Also the device give no confirmation sound that it is connected.
On all the other devices (Wifi 4.0, Galaxy S, Lenovo A1 Tablet) I get the message:
Confirm password to pair with "RS507 1234"
Then I only have to press Accept and the device is paired and working.
Does anyone have a similar problem with another bluetooth device and knows a solution how I can connect the scanner?
If it will not work I have to look around for the old Galaxy Wifi 4.0.
Thanks for your help.
Click to expand...
Click to collapse
Try enabling CONFIG_BT_HID in your kernel. I say this since the scanner's datasheet has blutooth HID listed, the 4.2 kernel doesn't have it enabled, and my 4.0 *does* have it enabled. In the 4.0 it's configured as a module, but you could try getting away with linking it directly in your kernel just in case the 4.2's init scripts/ueventd doesn't load it.
If you need help doing this let me know in a PM.
jlyo said:
Try enabling CONFIG_BT_HID in your kernel. I say this since the scanner's datasheet has blutooth HID listed, the 4.2 kernel doesn't have it enabled, and my 4.0 *does* have it enabled. In the 4.0 it's configured as a module, but you could try getting away with linking it directly in your kernel just in case the 4.2's init scripts/ueventd doesn't load it.
If you need help doing this let me know in a PM.
Click to expand...
Click to collapse
Thanks for your help. But I configured the scanner to use SPP an not the HID profile. Is SPP also disabled ?
It is not that important for me anymore.I bought 15 new 4.0 devices. But as a sport I want to get it working on de the 4.2
Can I ask?
kiteman76 said:
Thanks for your help. But I configured the scanner to use SPP an not the HID profile. Is SPP also disabled ?
It is not that important for me anymore.I bought 15 new 4.0 devices. But as a sport I want to get it working on de the 4.2
Click to expand...
Click to collapse
Hi, We are trying to do pretty much the same thing pairing RS507 to Galaxy Player. Can I ask where you found or can you describe the procedure for pairing.
Thanks!
eikaun said:
Hi, We are trying to do pretty much the same thing pairing RS507 to Galaxy Player. Can I ask where you found or can you describe the procedure for pairing.
Thanks!
Click to expand...
Click to collapse
What version of the Galaxy Player do you have? I only succeeded in connecting it to the 4.0 and the 5.0. If you need more help, let me know.
Yes I need help
kiteman76 said:
What version of the Galaxy Player do you have? I only succeeded in connecting it to the 4.0 and the 5.0. If you need more help, let me know.
Click to expand...
Click to collapse
To answer your question 4.0. Yes I need help I am flying by the seat of my pants on this. If you can help with a start to finish explanation including any software you downloaded I would very much appreciate it. Like I say I really need some help - so thanks
RS507 and Android Phone
eikaun said:
To answer your question 4.0. Yes I need help I am flying by the seat of my pants on this. If you can help with a start to finish explanation including any software you downloaded I would very much appreciate it. Like I say I really need some help - so thanks
Click to expand...
Click to collapse
Hi,
I've tried connecting Android to various other BT scanners before (using the SPP) and have not had problems. But I'm struggling on the RS unit.
What I normally do is on other scanners is turn pairing on for the scanner, connect and pair to the unit from the phone. Then start my application on the phone, which initiates the connection to the scanner and connects. Then I can read from the scanner and all works well.
On the RS this seems different, as you don't seem to put the RS in pair mode and connect to it. instead the process seems to be to scan a barcode on/for the device (with MAC id?) and the RS connects?
Either way, I have not managed to get this to work.
Can someone provide me with the correct process to connect the RS to an android device in SPP mode?
Any help or working code example would be much appreciated!
Hello,
Recently I bought a tablet Cello T1144 v2 through ebay and it does not work properly. I can not connect to a wireless network. I try to turn the wireless settings on and see how the slide moves to "ON" and immediately turns "OFF". Also its sometimes reboots randomly. Before I decide that this is hardware issue, I want to reinstall Android, but I cant find ROM for this tablet.
I tried to contact Cello support and asked, but no luck -- they only said that I can send them tablet and they will reinstall it for charge. But it is very non economical for me. Maybe somebody had this tablet or can provide some useful links where I can find ROM? I would be grateful for any information about ROM for this tablet
Hi everyone,
I have a problem with my watch "Amazfit Pace".
My phone is a Nexus 6P and I use the application "Amazfit Watch"
When I turn off the watch, the wifi on the phone become extremely slow.
The problem is fixed if I turn off the bluetooth on the phone (but I need the bluetooth for other devices, so that's not a solution).
Maybe the application is always searching for the watch and disturbe the wifi on the phone ?
I'm trying to find a solution with Amazfit support, but they tell me not to repeat the problem.
Thanks for your help.
Settings>Apps>Amazfit watch app>Change system settings off
Check there, I had problems with BT turning on all the time and I had to turn off there, so it turns on only when I open application.
"When I turn off the watch, the wifi on the phone become extremely slow."
i don't get it
the watch doesn't connect directly (through wifi) with the phone , the bt is for that
the watch connects (through wifi) with your router and need the wifi for the update only (i think)
are you sure that your router is "ok" ?
do you have the same problem on different wifi / router ?
Thank you for your response.
I know the watch connects in bluetooth.
But when the connection is not made (for example the watch is off or I don't have it with me), it is the wifi used by my phone that works very badly.
Everything goes back to normal if I turn off the Bluetooth or uninstall the Amazfit application.
I haven't been able to test with another router yet, but all my devices are working properly with it.
Did you tried to do what I wrote you? Try that, force stop Amazfit app and hope on the best.
droidhd said:
Did you tried to do what I wrote you? Try that, force stop Amazfit app and hope on the best.
Click to expand...
Click to collapse
Thanks for your help, but it doesn't work any better.
Because of a battery problem, Google has just changed my Nexus 6P by this one which is a reconditioned one, and I wonder if it doesn't have a problem.
What bothers me is that otherwise everything works perfectly.
I didn't test the watch with my old Nexus 6P, too bad, it went back to Google...
Yeah I got the same problem!
The amazfit app has a very aggressive policy for bluetooth pooling. The wifi/ble are places on a single chip in our phones and they're sharing the same rf antenna. That's why it probably slows down wifi.
I have a xiaomi phone btw.
i have the same problem, i write to amazfit support and repply : "you are the firts person with this problem".
i have problem with samsung a3 , a5 and S7
with others phone do not have problem at all
any ideas?
Thank you for your answers.
I am reassured to see that I am not the only one concerned.
I have submitted the problem to the Amazfit support.
Hi, is there any news about this problem? Cause i have a same thing, then I turning on an airplane mode on the wach Wi-Fi is going down...
Hi,
I am still in discussions with Amazfit support, no solution yet. I just sent them the app logs.
I think everyone who has the problem should report it to them, so maybe it will solve the problem more quickly.
Hello, I have exactly the same problem, any news from Huami?
Thank you very much
I am still in discussions with the support, but they don't find the solution.
I encourage everyone involved to bring the problem to their attention as well, that may help to solve the problem.
support.amazfit.com => Submit a request
You can quote my ticket number: 22185
I reported it directly to the development lead and team and we'll keep you posted on what we find. Thanks.
netzkobold said:
I reported it directly to the development lead and team and we'll keep you posted on what we find. Thanks.
Click to expand...
Click to collapse
this is what they just told me:
"Hello Joan,
Thank you for the reply. We are apologize for the trouble.
Our tech support have already looked into this issue, and they said there is no problem with the app. Could you please wait for the next update of the app to see if the issue can be solved? Thank you so much for your cooperation!
Should you have any further questions, please feel free to let us know. Cheers and have an excellent day!
Sincerely,
Seven | Amazfit Support"
Just had a month of banging my head over this strange behaviour. Even called ISP support to come check it, because sometimes it would even crash my router. Always at around 23h until about 7h the wifi would be like a crawl. Today I really took the matters into my hands and made some tests with network analyzers on the phone and so then began uninstalling apps from more recent to older. As soon as Amazfit watch app went away bang! everything began working, even a movie that had tried to start on chromecast and was stuck for more than 30min started playing out of nowhere.
Then tried to install it back again and issue started again even though it was disconnected from the phone. My first thought was that crazy chinese had put some creepy code at would start doing something creepy at night. Then I remembered that I had auto airplane mode from 23h to 7h! This is crazy! Airplane mode is useless this way.!
I'm going to open a ticket also. Not sure if this happens with every phone, mine is quite old. Sony Xperia Z3, could be only old chipsets, but could also be people just don't know whats going on and blame other things, because it is a really strange behaviour.
I just received a reply from Amazfit Support:
"Our developer team are working on this issue. Hope this will be optimized in the near future, but no dates have been set yet.
Could you please reset your router to 5G dual band to have a try? Thank you for your patience and understanding!"
So they are aware and trying to figure out what to do. I believe the workaround will work, because bluetooth is also 2,4Ghz and that might be the issue, but have to try later at home.
Wifi problems
Same problem here. WIFI on smartphone goes down when watch is disconnected (airplane mode, turned off, away from phone, etc). Reported to amazfit support. Big bug!
Bad news from Amazfit support, they blame the phone, and their only solution is "try on another phone":
Seven (Amazfit)
Nov 21, 01:18 PST
Hello there,
Thank you for your email. We are very sorry about the inconvenience.
Our developer team argued that such issue maybe caused by certain mobile phones. Could you please try another phone to have a try? Thank you for your understanding!
Should you have any further questions, please feel free to let us know. Thank you and have a nice day!
Sincerely,
Seven | Amazfit Support
I've got the same issue and just wrote a ticket through the app with screenshots from a speedtest app.
i've got an oneplus 3t with android 8.0.0
Wifi speed usually is 50 Mbit/s. If the watch is disconnected it goes down to about 5 Mbit/s. I can reproduce this behavior everytime I want to, so it's caused by the app.
Hello developers,from last 5 days my amazfit touch screen not working.Its getting charging and even displays time.I tried to restart it 100 times but no use.I drained the battery and charged it 100% but still no use.Anyone please help.
Found a solution
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
I try unpaired watch but touch not work,
bsvinod said:
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ya it's work thanks bro its Diwali biggest gift thank you again
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
hajduk78 said:
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock?
Still no response
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
yunussalman said:
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
watch model
lfom said:
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
Click to expand...
Click to collapse
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.No,i haven't tried to flash its still stock.
Thanks in advance
yunussalman said:
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.
Thanks in advance
Click to expand...
Click to collapse
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
No at present i have unpaired it.
lfom said:
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
Click to expand...
Click to collapse
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
yunussalman said:
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
Click to expand...
Click to collapse
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
I Tried with other phones and other apps
lfom said:
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
Click to expand...
Click to collapse
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
I also have the same problem. Touch screen is not working. Pace 2.6.2.0. Pace is normally charging, no flickering on the screen. I have unpaired it with the phone, but no possibility to pair it again since I can't tell to confirm pairing number.
Poslano sa mog MI 6 koristeći Tapatalk
yunussalman said:
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
Click to expand...
Click to collapse
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
yunussalman said:
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
Click to expand...
Click to collapse
If it's paired with phone, go to Amazfit app -> My Watches -> More and tap on Unpair (it will erase all data on watch).
Or use the remote control app to go to Settings -> Device and choose factory reset. But I thought you had already done this (factory reset)...
Dear developers,
i have tried everything and at last my watch has been working its been updated 4 times and at present the version is 2.8.0.5
previously it was 1.2.6.0 or something.....its been working but sometimes the touch is not working,if i left it aside and after 10 to 15 minutes or after i restart it then it will work.
can you guys help me for this?
we can say that screen is flickering(making small quick moments).
please help
Anyone please help....iam a fitness freak and i badly need it to get repaired
Amazfit screen not showing anything
Hello, I'm writing hoping someone can help me.
My pace it's broken or so it seems, like it is turned on but not showing anything on screen. In first it seemed dead but was connected to my phone and counting steps but nothing on screen.
When receiving notifications it was vibrating as usual but again nothing on screen.
If I turn it off it shows battery charging, when I turn is on shows Amazfit logo but after screen shutsdown and nothing appears.
I have it unpaired now and can't pair again...
I have unlocked boatloader and reflashed latest us tomorrow but... Same behavior, did this appened to someone, or can someone help?
Thank you
lfom said:
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
hi , anyone had any sucess with this app? the remote screen . ? i cant get it to work and also have the same problem with the stratos touchscreen , but half of the right side does not work