my a3 suddenly restarts while using after android 10 update, I've already did a factory reset it didn't work, is it a bug or hardware issue? how can i fix this? it happens everyday more than once and its frustrating
I have a same problem
same here
Hello guys, had the same issue and found that chrome is messing up the memory and creating restarts, so disable Chrome and use different browsers like opera and Firefox.
Have you tried with other versions of Chrome like Chrome Canary or Chrome Beta?
In my case it's not Chrome.
The reboots always happen when the phone is locked or while unlocking the phone. They never happen when I'm using the phone.
The reboots always happen in the same parts of the day (22:00-01:00 and 04:00-12:00) and never when the phone is heavily used during the other parts of the day.
Different A10 ROMs I've tried (Evolution X and crDroid) and different kernels (Bit and Fenix) and all of them have this problem. I've never tried the stock A10 ROM.
Maybe there are 2 (or more) different Mi A3 versions, because my 1st Mi A3 didn't have this problem.
Yes same here.. it has a random reboots. Still for unknown reasons.
I've encountered this problrm when i flashed the first a10 update (global), and then, i used miui 11 rom for a few months, no problem with miui. Few days ago, again, i flashed official a10 (global, and my phone is eu) and totally forgot about the restarts, and when it started i got reminded of those issues.
In my case, it might be because of global rom on eu phone, or magisk (even tho i use only energized module), but it happens when i type on keyboard (no matter what rom or what phone, i always use gboard), but chrome does tend to freeze, which did never happen on miui.
If there is any fix, please reply.
Hi. I have been encountering a similar problem. The phone is new since I have been using it for a day only. I haven't modified the phone or installed an update. I was playing when the phone restarted by itself and kept on restarting (it vibrates then shows android one then shuts down again). It kept on happening until my battery died. I tried charging it but it kept on doing the same thing. Hoping to find help. TIA
Same here on rom Pixel Experience
I had this issue on MIUI 11, MIUI 11 + Fenix Kernel, crDroid, EvolutionX and the latest stock ROM. Beginning to think it might be a hardware issue. Maybe it's related to thermals? One time it rebooted randomly while navigating and the phone was in front of the A/C, so I thought the reason might've been the cold coming from there. Other than that I have absolutely no clue what's causing this.
Chogiwaaa said:
Hi. I have been encountering a similar problem. The phone is new since I have been using it for a day only. I haven't modified the phone or installed an update. I was playing when the phone restarted by itself and kept on restarting (it vibrates then shows android one then shuts down again). It kept on happening until my battery died. I tried charging it but it kept on doing the same thing. Hoping to find help. TIA
Click to expand...
Click to collapse
Damn! Y didnt u goto fastboot mode?!
Same here - totally unstable even after June 5th update. Right now my phone is not responding. It randomly rebooted about 15 mins ago, still didn't response, manually restarted it, came back up but is now not responding again. I can't have this level of instability with my business phone. Going to attempt to get a refund and try a different manufacturer. Shame as I love the phone otherwise...
---------- Post added at 12:41 PM ---------- Previous post was at 12:34 PM ----------
marstonpear said:
I had this issue on MIUI 11, MIUI 11 + Fenix Kernel, crDroid, EvolutionX and the latest stock ROM. Beginning to think it might be a hardware issue. Maybe it's related to thermals? One time it rebooted randomly while navigating and the phone was in front of the A/C, so I thought the reason might've been the cold coming from there. Other than that I have absolutely no clue what's causing this.
Click to expand...
Click to collapse
Pretty sure it's related to thermal problems. It's very warm in the UK right now. My car was hot inside - Mi A3 crashed after about 10 minutes on the passenger seat. I'm indoors now in the cool but can't get it to work. Will reboot okay, work for about 5 mins and then go slow - usually followed by another reboot.
CPU-Z shows some pretty hot temperatures in there... I've taken my 3rd party case off but not helping.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my A3 mobile has same issue restarts even I've already did a factory reset it didn't workhow can i fix this? it happens at least 10 to 12 times in day
Rakesh.1531 said:
my A3 mobile has same issue restarts even I've already did a factory reset it didn't workhow can i fix this? it happens at least 10 to 12 times in day
Click to expand...
Click to collapse
Rollback to Android 9
---------- Post added at 08:49 PM ---------- Previous post was at 08:48 PM ----------
For those bugs in 10 i left Android 10 .. nowusing Android 9 stock rom with root+twrp.. no issue ?
Sami Devo said:
Rollback to Android 9/QUOTE]
Any risk with doing that?
Click to expand...
Click to collapse
munrobasher said:
Sami Devo said:
Rollback to Android 9/QUOTE]
Any risk with doing that?
Click to expand...
Click to collapse
No.. but flash miui11 first for not loosing sensors via twrp..
Then flash stock after u see all things works in miui11
Click to expand...
Click to collapse
Sami Devo said:
munrobasher said:
No.. but flash miui11 first for not loosing sensors via twrp..
Then flash stock after u see all things works in miui11
Click to expand...
Click to collapse
Thanks - seriously considering doing this as my A3 is totally unstable/can't trust it.
Click to expand...
Click to collapse
munrobasher said:
Sami Devo said:
Thanks - seriously considering doing this as my A3 is totally unstable/can't trust it.
Click to expand...
Click to collapse
Just flash miui11 1st via twrp.. then after u see all ok in miui thrn flash fastboot rom of Android 9
Click to expand...
Click to collapse
Sami Devo said:
Damn! Y didnt u goto fastboot mode?!
Click to expand...
Click to collapse
Dude I don't have that much knowledge when it comes to that but I surely did try to press two buttons at the same time such as fast boot and the other of which I can't remember that much. But.. it would just show fast boot mode then restarts again as for the other.. it says no command. What happened to me is that I sent it back to where I ordered it from, after an negotiating with the seller and after around 2 weeks, due to some delays, they sent me a refund.
Related
I have a xt910 with cm11
I installed the new nightly 4.4.3 (tried them all) and after few minutes, when i wake up th screen there is a white pixelated screen. It seem like it is responsive, working normal, even when I take a screen shot it apears what i shod sees instead on the white screeen. I need to reboot to fix that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I went few nightly back, and it back to normal,
Is there a solution for that problem, how do you call it, I searched and found nothing.
Thanks
Nobody saw this before?
Envoyé de mon Nexus 7 en utilisant Tapatalk
Mathieu2k4 said:
Nobody saw this before?
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Hello,
I have the exact same problem. And it drives me crazy.
It all happened when I flashed a newer version of the MoKee 4.4.3 ROM based on CM11.
I am currently using this version:
MK44.2-umts_spyder-140524-RELEASE.zip -> and this is the only newer and stable version without the problem.
Any newer releases since May 31st. have the exact same problem. Everything runs smoothly until I leave the phone for a while, usually 5-10 mins. When I turn the screen on... I get this weird distortion just like you do. And I have to restart my phone with POWER + VOL DOWN key combination.
The ROM releases with this kind of problem are:
MK44.2-umts_spyder-140531-RELEASE.zip
MK44.2-umts_spyder-140604-RELEASE.zip
MK44.3-umts_spyder-140610-RELEASE.zip
I have tried almost every trick I could imagine, I've fiddled with the kernel, tried to turn off power saver, tried to force 2D rendering, force 16bit transparency.. and so on. But the problem still persists.
So, at this very moment I cannot update my ROM with the newer versions because I don't know what is causing the problem.
On my 4.1 stock ROM I had a problem with HDMi being always turned on, due to hardware malfunction of the phone. That is why I switched to rooting and flashing a custom ROM. The HDMi problem was gone... but this might be somehow related. Maybe the newer versions of CM11 for Xt910 have the HDMi service back on. I don't know.
Oh yes, and one more thing. I thought that it was a bug in MoKee, but I flashed a different kind of ROM, the RessurectionRemix from June the 4th and this ROM also has this kind of problem. So, it might be a hardware issue or something is wrong with the newer releases.
I need help on this.
Ok, good to know, i just tried cm11 and everything newer than 05/28 give me that screen.
I also had hdmi always on with stock rom.
Maybe it's related.
Envoyé de mon Nexus 7 en utilisant Tapatalk
So I guess we are both stuck on May releases for now. If you somehow discover any other 4.4.3. ROM without this pixelated screen bug, please post it here. So we could help other people which are having the same problem as we do.
As a matter of fact, it is definitely a problem with the HDMi interface. Because both of us share the same problem. Before my phone was rooted, I was stressed by this HDMi fault on my phone. Every time I restarted my phone, the HDMi was force-turned on upon boot. And my screen was force-rotated. So I had to go to screen settings and activate/re-activate HDMi to get my screen back to normal. After I've rooted my phone I removed the webtop software and my problem with the forced HDMi switching was gone. That was on my 4.1.2 stock ROM.
And when I tried out the MoKee 4.4.2 everything was running perfectly until these June releases which are buggy.
I am aware of the fact that this is probably a hardware fault. But maybe if I flash the newer ROM version and if I try to uninstall the webtop service again... maybe it will work.
I plugged the hdmi on my tv when the white screen appeared and it was working,white screen on the phone, and actual display on the tv. but the phone was very slow, sometimes the white screen disappeared.
I tried to kill some process, but no success.
Maybe there is a commit implemented on these new builds, related to hdmi function
But, don't know much about it, and where to look.
Envoyé de mon XT910 en utilisant Tapatalk
Just wanted to check in and confirm that I gott the same exact problem. Hdmi error on stock, and the white screen on june builds. Staying on may for now. Tried a few different cm roms and the all seem to have the same problem....
Is there not a way to disable the hardware via build.prop for cm11?
Bvall said:
Just wanted to check in and confirm that I gott the same exact problem. Hdmi error on stock, and the white screen on june builds. Staying on may for now. Tried a few different cm roms and the all seem to have the same problem....
Click to expand...
Click to collapse
Any luck so far? I haven't tried any newer CM11 builds.
Could this be made publicly available?
Sasha316 said:
Hello,
... It all happened when I flashed a newer version of the MoKee 4.4.3 ROM based on CM11.
I am currently using this version:
MK44.2-umts_spyder-140524-RELEASE.zip -> and this is the only newer and stable version without the problem.
Any newer releases since May 31st. have the exact same problem. Everything runs smoothly until I leave the phone for a while, usually 5-10 mins. When I turn the screen on... I get this weird distortion just like you do. And I have to restart my phone with POWER + VOL DOWN key combination. ...
Click to expand...
Click to collapse
Hi mate, If you still have the rom downloaded, could you please upload it for us? Its been taken off the MoKee site and cannot seem to find it anywhere else. Would very much appreciate it as this is the only way I can see to get the phone working properly again. Thanks.
radie1230 said:
Hi mate, If you still have the rom downloaded, could you please upload it for us? Its been taken off the MoKee site and cannot seem to find it anywhere else. Would very much appreciate it as this is the only way I can see to get the phone working properly again. Thanks.
Click to expand...
Click to collapse
Finally, I have discovered a solution to this menacing problem. Here it is folks!
The trick is, you need to install a custom kernel which could disable the HDMi interface by all means. I have downloaded the JBX kernel ver. "JBX-Kernel-3.5-Hybrid-Spyder-4.4_2014-07-08.zip" and flashed it over my LiquidSmooth rom.
The LiquidSmooth build is "LS-KK-v3.1-2014-07-06-umts_spyder.zip" from early July. I used a clean install on the rom (wiped all data on my phone) and then after flashing the rom and the gapps... I flashed the JBX kernel over it. Although, while installing the JBX kernel... you MUST leave the "disable HDMi" option selected. The fault is only with the HDMi interface, so you MUST disable it for things to work properly.
As for the last couple of hours, the rom is running fine and the white pixelated screen is gone. I can't describe the joy I feel after fixing this one.
Spread the word! :good:
Thanks
Sasha316 said:
Finally, I have discovered a solution to this menacing problem. Here it is folks!
The trick is, you need to install a custom kernel which could disable the HDMi interface by all means. I have downloaded the JBX kernel ver. "JBX-Kernel-3.5-Hybrid-Spyder-4.4_2014-07-08.zip" and flashed it over my LiquidSmooth rom.
The LiquidSmooth build is "LS-KK-v3.1-2014-07-06-umts_spyder.zip" from early July. I used a clean install on the rom (wiped all data on my phone) and then after flashing the rom and the gapps... I flashed the JBX kernel over it. Although, while installing the JBX kernel... you MUST leave the "disable HDMi" option selected. The fault is only with the HDMi interface, so you MUST disable it for things to work properly.
As for the last couple of hours, the rom is running fine and the white pixelated screen is gone. I can't describe the joy I feel after fixing this one.
Spread the word! :good:
Click to expand...
Click to collapse
Thank you, I am trying this and it seems to be working. Cheers.
Q&A for [ROM][Linux/XBMC] OpenELEC for Amlogic-based TV-Boxes
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Update through samba share corrupted the installation
After putting the tar file in the update folder through samba (double checking the file was not corrupt). I rebooted the MX. It started loading the Kernel and system files and checked the MD5. All okay. But during update it reported some strange numbers (cannot recall at the moment). And dropped to a command line. I think it was write the files but failed. It did mention something about failing some mount. I had to reboot in recovery mode and update that way. I was wondering if this is a known issue and how to prevent it in the future.
---------- Post added at 09:48 PM ---------- Previous post was at 09:43 PM ----------
I have a few of these CMX clone boxes laying arround from geekbuying.com. One of them refuses any rom (even the original one). I now resort to editing updater-script and remove checks (first few asserts). This box was fine until I installed a matricom image (latest). After that I was no longer able to do normal recovery procedure. Any ideas?
Powdor said:
After putting the tar file in the update folder through samba (double checking the file was not corrupt). I rebooted the MX. It started loading the Kernel and system files and checked the MD5. All okay. But during update it reported some strange numbers (cannot recall at the moment). And dropped to a command line. I think it was write the files but failed. It did mention something about failing some mount. I had to reboot in recovery mode and update that way. I was wondering if this is a known issue and how to prevent it in the future.
Click to expand...
Click to collapse
No that's not a known issue. I'm updating my box several times a day during development and never encountered such issue.
[BUG] 4.2.1 Enabling Wifi on Clean install
Hi
There seems to be an issue with v4.2.1 on a clean install from matricom's v1.1.6. If you enable wifi, the device crashes. If you upgrade from a previous version it's fine. Anyone else experience this or not? On that note, the new driver is working great. Fixes an issue I had with intermittent signal
when choosing the new power off from the system menu, the device appears to shut down, however stays on the blue led. using the power button on the remote then makes it switch to the red led (=really off). this also means that if i only shut down through the menu, next time i want to use the device i would have to push the power button twice.
does the device really shut down through the menu (with low/no power consumption) or is it a kind of sleeping state?
tcla said:
when choosing the new power off from the system menu, the device appears to shut down, however stays on the blue led. using the power button on the remote then makes it switch to the red led (=really off). this also means that if i only shut down through the menu, next time i want to use the device i would have to push the power button twice.
does the device really shut down through the menu (with low/no power consumption) or is it a kind of sleeping state?
Click to expand...
Click to collapse
Unfortunately MX2 cannot be completely powered off programmatically. Powering the box off from the shutdown menu, puts it into sleep (suspend) state. But again, unfortunately you cannot wake it up from that state, you need to power off/power on it again.
Wifi Bug? 4.2.1
Hi Codesnake,
Firstly - Thanks! I cant believe how professional this is, even things I didn't think would ever work (usb audio, certain video formats etc) are now working perfectly.
I had a couple of issues with one of the boxes I was running it on, so I decided to factory reset and install 4.2.1 clean. I found I was unable to connect to my wireless network (invalid arguments). Everything worked fine on Beta 6.
So, I downgraded to Beta 6 and sure enough was able to connect. Then I upgraded to 4.2.1 and wireless continued to work.
Not a problem unless you install fresh, but thought you may like to know.
OpenElec on Amlogic S805
Hi Codesnake,
I'm interested on how it's going in getting the OpenElec firmware compatible with the S805. I have just bought an MXQ box which I haven't found to be particularly stable with the Android build with the addons I use. I use the same addons on an MX with OpenElec and they on-the-whole it works fine with the latest Gotham 13.2 / Openelec 4.2.1 release.
I would be happy to lend a hand in any beta testing if this can help you out at all. I have a dev/test/support background, so should be pretty competent in reporting back any issues that may arise.
Cheers,
GiantJ
openelec mx2
Hi I have Openelec on my mx2 but after about 27 mins upwards the sond and film continue but the screen goes green. pausing rewinding does not get rid of it. i have to stop the film.
any idea's or help would be appreciated.
openelec for Minix NEO X8-H
Is there a possability openelec is being build for the Minix NEO X8-H?
noahmec said:
Is there a possability openelec is being build for the Minix NEO X8-H?
Click to expand...
Click to collapse
I don't have such device, so currently this is not possible. If you or someone other are willing to donate a Minix NEO X8-H, then it would be possible.
Hello everybody here , just a question will this box be compatible with this openelec build ..thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
f4rell09 said:
Hello everybody here , just a question will this box be compatible with this openelec build ..thanks in advance
Click to expand...
Click to collapse
Yes, should be compatible.
Thanks for quick reply
Jynxbox M1V2 Pure Linux
Hello Codesnake and thank you for all your efforts so as to help people like me,that ignorance is our first name.
I own the box of the title.
Would it be possible to install your openelec on that box?
Probably it would give much life to it,as far as I can understand.
Thank you in advance for your answer...
Pavlitos80 said:
Hello Codesnake and thank you for all your efforts so as to help people like me,that ignorance is our first name.
I own the box of the title.
Would it be possible to install your openelec on that box?
Probably it would give much life to it,as far as I can understand.
Thank you in advance for your answer...
Click to expand...
Click to collapse
Unfortunately that box is not supported by my port of OpenELEC, and unlikely will be supported in future, because it is based on old AML8726-M3 chip.
codesnake said:
Unfortunately that box is not supported by my port of OpenELEC, and unlikely will be supported in future, because it is based on old AML8726-M3 chip.
Click to expand...
Click to collapse
ok then,my "crossfingered" wish didn't evolved as I would wish...
I wish I had the knowledge to contribute,because as far as I can understand that is the best pottential for boxes like this...
Nevertheless on to the subject. Thank you very much for your quick answer and thumbs up for your contribution to community...
Hopefully you get back part of the effort you been made...
Keep up your good work...
I ll be keep searching for an answer for that box cause I want to gift it to my father-in-law so as to keep entertain my 2 yo daughter.
But Pure Linux is something that I cannot handle,let's not disquss about him...anyway...
Greeting from Greece and wish you the best...:good:
Some issues with 4.2.1
Although it works great on my (clone) MX2. (It is this box from geekbuying), I ran into a few small issues.
I have the occasional total freezup (although not seen so often the last couple of days) which I did not see on previous versions. Now sometimes it has turned itself off (blue led), maybe this freezup has something to do with it, I do not know (power safe mode maybe?). But more important I cannot get the device to turn back on after it is in the blue led state (either by me powering it off and then powering on by remote or when it got there itself).
Any thoughts?
Codesnake thank you for your work on EM8 what a difference it make on these boxes, I know this project is young, but what is your thoughts on getting the native bluetooth working on the box? It's not a huge thing but just interested on your input about it?
Thanks
pigbait said:
Codesnake thank you for your work on EM8 what a difference it make on these boxes, I know this project is young, but what is your thoughts on getting the native bluetooth working on the box? It's not a huge thing but just interested on your input about it?
Thanks
Click to expand...
Click to collapse
Maybe in future I will add support for bluetooth, if I'll have time.
Rooted, running BareCee_V2, ZVC.
Recently (within the last week), I have been the SIM card removed or No SIM card error. I can usually clear it by restarting the phone, but today, it happened twice with a few minutes of each other. Anyone else getting this error? I don't even take out my SIM card, so I can't imagine it being hardware. I have been running this rom for a while now, and there have been no problems at all.
Same problem here, starting on monday october 24.
Was working OK on Resurrection Remix since august, then last monday issues started and upgraded to new RR, same happened and changed to ROM to TekCafe (ported stock Marshmallow from D255) and things got worse.
Right now it just does't work.
Same here. Doesn't work on gsm networks. Invalid sim message or no sim detected on multiple roms
Tekcafe
Fulmics
PrimeGSM
stock with sim unlock files
AOSP builds
Nothing works.
FIXED
For others who wants to unlock GSM in LS990 new builds, try this thread. It works for me. I found this thread after days of searches. Works perfectly on Fulmics 6.6
http://forum.xda-developers.com/spri...0-zv8-t3083567
GTRanushka said:
For others who wants to unlock GSM in LS990 new builds, try this thread. It works for me. I found this thread after days of searches. Works perfectly on Fulmics 6.6
http://forum.xda-developers.com/spri...0-zv8-t3083567
Click to expand...
Click to collapse
This is not related to unlocking. Phone is working well and suddenly appears the warning, losing signal, invalid sim, sim removed and/or others.
Today I was using phone and data, when message appeared I restarted and got working, sometimes failed, sometimes were good.
melvynperez said:
This is not related to unlocking. Phone is working well and suddenly appears the warning, losing signal, invalid sim, sim removed and/or others.
Today I was using phone and data, when message appeared I restarted and got working, sometimes failed, sometimes were good.
Click to expand...
Click to collapse
Oh.. Yes, the issue seems to be persist. So there is no solution for this yet?
Tried to update PRL and profile and no luck. Problem seems to more prevalent now. Few times a day, at least now.
Sent from my LGLS990 using XDA-Developers mobile app
No solution.
After flashing a new ROM it appears to work, 30 minutos, maybe hours. Then it start failing and everything get screwed.
melvynperez said:
No solution.
After flashing a new ROM it appears to work, 30 minutos, maybe hours. Then it start failing and everything get screwed.
Click to expand...
Click to collapse
But with last year builds i had no issue. I used a LS990 for an year in a GSM network, rocking cloudy roms. I don't know what cause this issue now?
Mine worked flawlesly last year. BareCee, BareBum and other ROMs. Worked with Resurrection Remix (8/29) and some weeks with the september's RR. Then it started to fail and don't work with neither.
I'm goig to flash a 4.4.2 stock .tot
melvynperez said:
Mine worked flawlesly last year. BareCee, BareBum and other ROMs. Worked with Resurrection Remix (8/29) and some weeks with the september's RR. Then it started to fail and don't work with neither.
I'm goig to flash a 4.4.2 stock .tot
Click to expand...
Click to collapse
Going back to 4.4.2 didn't help me. Btw, update me about your progress. :fingers-crossed: hope it'd work charm. Good luck.
Nothing with stock 4.4.2 (downloaded .tot and flash with LG Flash Tool)
Today I'm on third week with this issue. This is a brief of the problem on my side:
- Phone is working well and suddenly "no sim card" error. Sometimes it fix with a reboot, sometimes not.
- With some ROMs after normal usage, the message "SIM card removed" appears on screen with a counter from 1 to 10. After 10 phone reboots.
- With other ROMs it just says "invalid SIM card".
- With custom ROMs the signal meter appears well, with signal, like working but no SIM. Meanwhile, with stock ROM the red x appears next to signal meter and nothing is shown.
- I always had a copy of my EFS and had restored it without any effect.
- The app "SIM toolkit" sometimes appear on the launcher, even when the phone says it has no SIM.
The SIM works flawless in another phone. Other SIMs inserted in this phone don't solve the problem.
I don't know if this is a hardware or software problem. I bet my little finger is hardware related. I don't know what to do, I quit.
I guess either it's not as widespread or there aren't a lot of people on the G3 anymore. I guess I'm resigned to reboot when necessary if no one can find a solution.
Sent from my LGLS990 using XDA-Developers mobile app
As a last resort, I did take my SIM card out, blew out any dust, and put out back in. Since then, no issues. It does take dine nimble fingers to get that thing out, though. Let's hope I didn't jinx myself now.
Sent from my LGLS990 using XDA-Developers mobile app
I disassembled mine last friday, everything appeared ok. Cleaned it and put it together again. It worked. After around 20 minutes failed and worked again smoothly for 3 days. On monday it failed, some reboots and worked again. Errors were "invalid card" and "service disabled". Yesterday the wicked "SIM card removed" (then reboot) and then "No SIM card" error appeared.
I thought it might have to do with a short circuit, now I'm guessing this have something to do with temperature.
The area in the red square is where transmitters are located and where I'll check again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's a guide to disassembly:
https://www.ifixit.com/Teardown/LG+G3+D855+Teardown/42288
Just commenting to get updates. Everything was working fine, from 4.4 to 5.0 to 6.0. Stock kk, stock and custom ll to stock and custom mm. It appered 2 weeks ago while it was running fullmics. Have tried everything and every modem/radio version that exists.
Same issue is there now in my phone also. started few days back with the os is RR 7.1.2 and O2 SIM. Tried so many roms but no change.
---------- Post added at 02:13 PM ---------- Previous post was at 02:12 PM ----------
Any one got the solution??. Now i am trying different radios...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Moto G7 Power [ocean]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r41
Security patch level: September 2020
Build author/Device Maintainer: Aeqrs25
Device Source code: https://github.com/PixelExperience-Devices/device_motorola_ocean
Common Source code: https://github.com/PixelExperience-Devices/device_motorola_sdm632-common
Kernel Source code: https://github.com/PixelExperience-Devices/kernel_motorola_sdm632
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Thanks to:
Electimon
SyberHexen
erfanoabdi
Jleeblanch
Jorge Lucas
Grim Truth
If you have any problems feel free to contact me on telegram luizdores
Changelog:
27-March-20: Fixed issue with apns
25-March-20: Decreased notification light led brightness
Increased speaker volume
Disabled notification led while charging
23-March-20: First Build
Love the disabled battery charging light. It annoys me too. Shines in my eyeballand blinds me in a dark room. :cyclops: HUGE thanks for bringing PE to Ocean!! Awesome job on this!!! :good:
One thing I did notice is I had no data upon booting up. Installation was smooth and booted fine and from what I can tell everything is working great!
My carrier is Metro by TMobile and when I looked I didn't seem to have any apns in my directory anywhere. Remembered on Havoc 10 the apn.conf.xml are in product/etc and also system/product/etc so I threw the apn I saved from Havoc 10 in the system/product/etc , set permissions to 0644 and reset apn to default and data is on and working perfectly. Attaching my apn.conf.xml from Havoc if anyone else wants to use it..
Apn.conf.xml: https://mega.nz/#!TIQSFKIL!KILyjTMHqLfCRJTYnoIVMLvnsgBdsLHDbSVMDM2tCHE
All credit to Spaceminer for this apn.conf.xml swap fix because that's who I learned it from over on another device forum a while back.
edit..got it.
which version of twrp and magisk are you using? i tried booting twrp and it just freezes up?
flash713 said:
Love the disabled battery charging light. It annoys me too. Shines in my eyeballand blinds me in a dark room. :cyclops: HUGE thanks for bringing PE to Ocean!! Awesome job on this!!! :good:
One thing I did notice is I had no data upon booting up. Installation was smooth and booted fine and from what I can tell everything is working great!
My carrier is Metro by TMobile and when I looked I didn't seem to have any apns in my directory anywhere. Remembered on Havoc 10 the apn.conf.xml are in product/etc and also system/product/etc so I threw the apn I saved from Havoc 10 in the system/product/etc , set permissions to 0644 and reset apn to default and data is on and working perfectly. Attaching my apn.conf.xml from Havoc if anyone else wants to use it..
Apn.conf.xml: https://mega.nz/#!TIQSFKIL!KILyjTMHqLfCRJTYnoIVMLvnsgBdsLHDbSVMDM2tCHE
Click to expand...
Click to collapse
russ722 said:
which version of twrp and magisk are you using? i tried booting twrp and it just freezes up?
Click to expand...
Click to collapse
I use orange fox recovery, Elections build over on our roms section, and I never install it. Just boot it when needed. That way I don't have to deal with the freezes.. And I use latest Canary Magisk.
If you keep manually booting to bootloader and back to recovery eventually your touch screen will work.. If you have recovery installed then hold power button + volume down when it freezes then once you get back to bootloader then go back to recovery and just keep going back and forth till it stops freezing up. It will eventually..
(Edit)
Thanks for the info. So we don't need twrp installed to run a custom rom? I just reverted back to stock cause I couldn't get into the phone to add your apn file you uploaded .so from stock I just run the fox recovery then flash the canary then rom? There's so many threads saying how to root.im getting confused and end up starting over many times in the last few days. Appreciate the help.
Installed this last night. Working great and loving the Pixel Experience on my Moto Power G 7.
Sent from my moto g(7) power using Tapatalk
russ722 said:
Thanks for the info. So we don't need twrp installed to run a custom rom? I just reverted back to stock cause I couldn't get into the phone to add your apn file you uploaded .so from stock I just run the fox recovery then flash the canary then rom? There's so many threads saying how to root.im getting confused and end up starting over many times in the last few days. Appreciate the help.
Click to expand...
Click to collapse
No you never have to install a custom recovery. You can boot recovery when you need to use it if you choose to using: fastboot boot foxrec.img Then you won't get any freezes with your screen not being responsive like we all do if you have recovery installed. Sounds like your treading dangerous ground. Be careful or you can brick your device. What's your model # Ex: Mine is a 1955-5 metro by tmo. Thinking yours is same seeing how you went after the apn I posted.. If you have a 1955-5 Qualcomm Ocean metro by TMobile variant see the guide section, the thread titled: How to root for noobs. Can't miss it. That's the thread to follow if you have a Metro by TMobile variant G7 power. Lots of info there. I always just read the entire thread start to finish. Never just start flashing things when you're not ? sure what you're doing. You don't want to end up with a broken phone ..
This rom has been excellent!!
Sent from my Mi Mix 2 using xda labs
flash713 said:
No you never have to install a custom recovery. You can boot recovery when you need to use it if you choose to using: fastboot boot foxrec.img Then you won't get any freezes with your screen not being responsive like we all do if you have recovery installed. Sounds like your treading dangerous ground. Be careful or you can brick your device. What's your model # Ex: Mine is a 1955-5 metro by tmo. Thinking yours is same seeing how you went after the apn I posted.. If you have a 1955-5 Qualcomm Ocean metro by TMobile variant see the guide section, the thread titled: How to root for noobs. Can't miss it. That's the thread to follow if you have a Metro by TMobile variant G7 power. Lots of info there. I always just read the entire thread start to finish. Never just start flashing things when you're not sure what you're doing. You don't want to end up with a broken phone ..
This rom has been excellent!!
Sent from my Mi Mix 2 using xda labs
Click to expand...
Click to collapse
Thanks for the info help,gonna try again today. I did root by that method. I'm gonna try the orange fox recovery but couldn't seem to find the canary magisk.
mi device just died after flashing this rom, it wont even boot to recovery, wont power on
---------- Post added at 03:45 PM ---------- Previous post was at 03:29 PM ----------
does anybody can please help, the device seems dead, i tried to boot into recovery or bootloader, and it doesnt do anything
I know it's charged, but not even the boot logo comes in
Thanks for the help, i updated the rom with the apns file
flash713 said:
Love the disabled battery charging light. It annoys me too. Shines in my eyeballand blinds me in a dark room. :cyclops: HUGE thanks for bringing PE to Ocean!! Awesome job on this!!! :good:
One thing I did notice is I had no data upon booting up. Installation was smooth and booted fine and from what I can tell everything is working great!
My carrier is Metro by TMobile and when I looked I didn't seem to have any apns in my directory anywhere. Remembered on Havoc 10 the apn.conf.xml are in product/etc and also system/product/etc so I threw the apn I saved from Havoc 10 in the system/product/etc , set permissions to 0644 and reset apn to default and data is on and working perfectly. Attaching my apn.conf.xml from Havoc if anyone else wants to use it..
Apn.conf.xml: https://mega.nz/#!TIQSFKIL!KILyjTMHqLfCRJTYnoIVMLvnsgBdsLHDbSVMDM2tCHE
Click to expand...
Click to collapse
Contact me on telegram so i can help you
Vinpinto said:
mi device just died after flashing this rom, it wont even boot to recovery, wont power on
---------- Post added at 03:45 PM ---------- Previous post was at 03:29 PM ----------
does anybody can please help, the device seems dead, i tried to boot into recovery or bootloader, and it doesnt do anything
I know it's charged, but not even the boot logo comes in
Click to expand...
Click to collapse
Aeqrs25 said:
Contact me on telegram so i can help you
Click to expand...
Click to collapse
hello, can I contact you in any other way? I cannot access telegram since the phone died, also cannot activate it on mi laptop cause there is no way to receive the sms
Thanks in advance
So far i have tried this https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012 seems like you can boot having cloned the main memory of another moto device into a SD card, but the disk image in that forum is from a G5 not a Moto G7 Power device, so it didn't work
The failure is pretty weird, I leave it all night long plugged in to charge (just in case it might be discharged), and tried to turn it on, but it doesn't do anything, won't turn on, the screen doesn't light up, it won't vibrate, won't boot into bootloader, it's just weird
love the rom but is there anyway to increase the in call volume is kinda low for me.
See below
Google Play system update doesn't install. Shows update available, downloads, press restart to install.
Reboots, shows installing update, then reboots again, starts up and in security setting it shows the same update is still available.
Sent from my moto g(7) power using Tapatalk
Vinpinto said:
So far i have tried this https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012 seems like you can boot having cloned the main memory of another moto device into a SD card, but the disk image in that forum is from a G5 not a Moto G7 Power device, so it didn't work
The failure is pretty weird, I leave it all night long plugged in to charge (just in case it might be discharged), and tried to turn it on, but it doesn't do anything, won't turn on, the screen doesn't light up, it won't vibrate, won't boot into bootloader, it's just weird
Click to expand...
Click to collapse
Fish around in the Motorola threads about booting from a sdcard. There is a 1955-5 somewhere in there. I believe sd_shadow uploaded his. I can't recall which thread but I'll look again and try and locate it and if so I'll shoot you link via pm so we don't kill the thread talking about it.. I'll go hunt for the post now. May take me 15-20 mins but if you are looking for 1955-5 I know it's there somewhere here in one of those threads buried. I'll find it. Check your PM's in about 30 minutes. Anyone who needs the 1955-5 mmcblkxx to try and boot from sdcard send me a pm and once I locate the post with it I'll forward it to you.
Edit added:
On second thought it may be for the 1955-4 dual sim I'm not ? but all that info is there in that thread as well.. I hope that helps someone. https://forum.xda-developers.com/g7-power/help/help-blank-flash-moto-g7-power-t3930168/page4 on page #4 sd shadows post. He uploaded his to mega. Within those few pages 2-6 or so it has lots of helpful info on how to make a bootable sdcard ...
Thanks for the help, unfortunately I've already tried that with no results, probably the issue is that I need that sd image but from a xt1955-7 with February's last security update for my device to boot up, I'll wait till somebody publish it with a matching image
Please read and DO AT YOUR OWN RISK
After searching everywhere and trying to get a clear answer on the Global ROM_ROW support for Android 11 on the Lenovo Legion Duel (one), all I could find was don't use the Chinese ROM as it has many issues. So, like any person told not to I tried it. Though it worked I had multiple issues with sensors and my cell service in the USA. I went back to GLOBAL ROM .332 which was the most stable for me but did lose my casting ability for playing my games to my TV. This is a deal breaker for me as I take my phone on the go and hook to friends and family's TV's for Steam, Emulation, etc and we use the casting, as this allows me to play my games. Note I also use it for Gamepass cast to the screen for friends to watch the game etc.
I finally found an Android 11 non China ROM, but it was an EE ROM on another site (which I had to pay for) but NO Global ROW ROM as installed on the phone when I purchased it. After backing up my data yet again, I tried to install this one (see link below for how to install). Once I installed and rebooted the Lenovo Legion L79031 v EE 12.5.251_ST rom, and set my cell APN, Turned the 5G to NSA-SA and networks preference (to NR-LTE-GDSM etc...) it began to function. After prox. 30 seconds after a reboot from changing the settings, I got a notification for an update (YES OTA). The update is for 12.5.320 which has notification fixes and bug fixes. Hopefully, this will be my last time having to flash the device! But I can confirm the EE rom for 11 does function on T-Mobile in the USA and works with out issue so far, has only been a short time for usage, but finally a solution for me.
Pros:
Android 11
Battery life improved
Smoother touch rate
OTA UPDATES
(Everything seems to function including cell and text messages on USA T-Mobile including the 5G NR)
Cameras work for everything even BARCODE readers and Mobile banking depo which was an issue before (at least for me). Pic snap faster but no real software updates from last build for controls as far as I can tell.
ZUI loads much faster.
Cons:
Lost all settings backups seems to cause issue when restoring so manually re-adding is the best solution.
APN setting and other settings might need to be redone, if installing from a back up or updating with OTA update.
Rebooting seems to take longer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As for what everyone really wants the links and how to install, I have linked to a video I send to others to use for installing the ROM, it is NOT my video, but the best one on YOUTUBE( I found recently); I had my 8 year old son help me a few weeks ago update a friends Duel and I let my son follow the vid and install the rom, OBV I did the downloads on the PC and setup the file location but he was able to follow the steps well to load the files to the phone, which is why I suggest to us it. The first time installing is scary! There is BIG BIG BIG pre-req beforehand, back up your phones drives as mentioned in other post on this forum! I have had to use mine two or three times and with out it I would have been SOL! See links below for ROM and VID.
I do not take any responsibility if you brick your device or LOOSE your data, etc or if this doesn’t work on another US carrier, as I have only tested AT&T (friends’ phone) and T-Mobile (MINE). I will try to help if it’s messed up, but please back your stuff up!
(Not my video, but how to install)
ROM- EE version (I believe this to be UK ROM) (Again I PAID FOR THIS, but I am sharing it for FREE, as we should all have access to these OTA).
https://drive.google.com/file/d/12pcwgyWnrw_RfTZRfc78fHZ9VefS5VQL/view?usp=sharing
Lolinet is hosting the files now as well (free)
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
I know its only about a day but does everything still seem to be working? Camera, triggers, fingerprint scanner, notifications, etc. I'm on the china rom and have been searching for a fix pretty much everyday. It would be nice to have everything working on the phone
i cant download the file.i get acces denied
InvisibleAOD said:
I know its only about a day but does everything still seem to be working? Camera, triggers, fingerprint scanner, notifications, etc. I'm on the china rom and have been searching for a fix pretty much everyday. It would be nice to have everything working on the phone
Click to expand...
Click to collapse
Everything is working smoothly for me. I haven't had any issues that are show stoppers.
I did find it harder to change my network preferences, for cell service as I have to search for it vs going to advance setting. But again this is to change from NR/GSM/CMDA/GSM etc. most people leave this a lone but I move it around depending on the area and service I am in.
scrici19 said:
i cant download the file.i get acces denied
Click to expand...
Click to collapse
I shall
scrici19 said:
i cant download the file.i get acces denied
Click to expand...
Click to collapse
Working on it, I guess GOOGLE decided to block this. Working on it.
Zero11534 said:
Please read and DO AT YOUR OWN RISK
After searching everywhere and trying to get a clear answer on the Global ROM_ROW support for Android 11 on the Lenovo Legion Duel (one), all I could find was don't use the Chinese ROM as it has many issues. So, like any person told not to I tried it. Though it worked I had multiple issues with sensors and my cell service in the USA. I went back to GLOBAL ROM .332 which was the most stable for me but did lose my casting ability for playing my games to my TV. This is a deal breaker for me as I take my phone on the go and hook to friends and family's TV's for Steam, Emulation, etc and we use the casting, as this allows me to play my games. Note I also use it for Gamepass cast to the screen for friends to watch the game etc.
I finally found an Android 11 non China ROM, but it was an EE ROM on another site (which I had to pay for) but NO Global ROW ROM as installed on the phone when I purchased it. After backing up my data yet again, I tried to install this one (see link below for how to install). Once I installed and rebooted the Lenovo Legion L79031 v EE 12.5.251_ST rom, and set my cell APN, Turned the 5G to NSA-SA and networks preference (to NR-LTE-GDSM etc...) it began to function. After prox. 30 seconds after a reboot from changing the settings, I got a notification for an update (YES OTA). The update is for 12.5.320 which has notification fixes and bug fixes. Hopefully, this will be my last time having to flash the device! But I can confirm the EE rom for 11 does function on T-Mobile in the USA and works with out issue so far, has only been a short time for usage, but finally a solution for me.
Pros:
Android 11
Battery life improved
Smoother touch rate
OTA UPDATES
(Everything seems to function including cell and text messages on USA T-Mobile including the 5G NR)
Cameras work for everything even BARCODE readers and Mobile banking depo which was an issue before (at least for me). Pic snap faster but no real software updates from last build for controls as far as I can tell.
ZUI loads much faster.
Cons:
Lost all settings backups seems to cause issue when restoring so manually re-adding is the best solution.
APN setting and other settings might need to be redone, if installing from a back up or updating with OTA update.
Rebooting seems to take longer.
View attachment 5355159
As for what everyone really wants the links and how to install, I have linked to a video I send to others to use for installing the ROM, it is NOT my video, but the best one on YOUTUBE( I found recently); I had my 8 year old son help me a few weeks ago update a friends Duel and I let my son follow the vid and install the rom, OBV I did the downloads on the PC and setup the file location but he was able to follow the steps well to load the files to the phone, which is why I suggest to us it. The first time installing is scary! There is BIG BIG BIG pre-req beforehand, back up your phones drives as mentioned in other post on this forum! I have had to use mine two or three times and with out it I would have been SOL! See links below for ROM and VID.
I do not take any responsibility if you brick your device or LOOSE your data, etc or if this doesn’t work on another US carrier, as I have only tested AT&T (friends’ phone) and T-Mobile (MINE). I will try to help if it’s messed up, but please back your stuff up!
(Not my video, but how to install)
ROM- EE version (I believe this to be UK ROM) (Again I PAID FOR THIS, but I am sharing it for FREE, as we should all have access to these OTA).
https://drive.google.com/file/d/12pcwgyWnrw_RfTZRfc78fHZ9VefS5VQL/view?usp=sharing
Click to expand...
Click to collapse
scrici19 said:
i cant download the file.i get acces denied
Click to expand...
Click to collapse
This should be fixed, GOOGLE blocked it due to a bunch of attempts to hack into the account. Try the link again it should be view all, allowing everyone to download it, even without a google account. Try and let me know. Thanks.
Zero11534 said:
This should be fixed, GOOGLE blocked it due to a bunch of attempts to hack into the account. Try the link again it should be view all, allowing everyone to download it, even without a google account. Try and let me know. Thanks.
Click to expand...
Click to collapse
is working now.thanks
not working for me.after instalation the phone stay on logo for 1 min then is turning off.
scrici19 said:
not working for me.after instalation the phone stay on logo for 1 min then is turning off.
Click to expand...
Click to collapse
Did you install from a Global Rom and if so what version I installed from .332 as said with no issues. Spoke to someone else today on Facebook, and he was able to install and get it working as well. More than happy to help if I can.
I think that's the incompatible message
Get back to android 10 then flash the rom again
On .332 i get the incompatible hardware message.
You can fix that by flashing persist img
So i need to flash back the chinese rom,backup persist then install .332 and restore persist?
pikasus said:
You can fix that by flashing persist img
Click to expand...
Click to collapse
??
i managed to install this firmware.the only problem i have now is the camera not working.CANT CONNECT TO THE CAMERA
you dont exatly need the chinese rom just any working stable android 10 rom. flash rom then backup the persist and modem. then try android 11 again.
there is a guide here by mrgreapes
Incompatible Hardware with System ROW ROM 332
When I install the .332 global rom, when I start the device, I receive a message that says: the hardware is incompatible with the current system. Someone with a similar problem?
forum.xda-developers.com
persist fix the incompatible hardware message, camera and some sensor problem
modem fix no sim signal.
Hi i'm been looking for this good news for a long time ago. I have 3 questions. The first one, can I install the EE 12.5.251 row ROM directly with the qfil software, I mean I just exctracting the 251 ROM on a folder with the same name on the c unit and then run the qfil software?… The second one: I'm on CN ROM 12.5.225, so I wan't to know if there is any big chance to get the black screen as before when I tried to get back to the global? And the last one, the video on your post of how to change to global is broken can you fixed please?. Thank you very much for your time and patience. Greetings
I used 12.5.320 and I started to have service issues after about 3 months and the OS crashed, most stable version for me is still 12.0.332. I have not tried using the newest china ROM and thought about trying it
Please could you reupload the video cuase it's not available Now