Hey all.
Easy question I hope! I've been following the guide to unbrick MTK devices, and have managed to get an original factory ROM to flash to the phone, green tick in SP Flash Tools. However, the phone still won't power on at all, save for the light if plugged into usb.
The ROM I've been using is an original factory rom named "ONE-TOUCH-4015X_POP_C1_FULL_STOCK_BACKUP" which is readily available online. I'm not sure what I did to brick it in the first place, but it was within SP flashtool. I May have formatted accidentally.
If someone coudl help I'll try to provide all logs or files requested but please tell me where these could be found as I'm not that good with flash tool.
To confirm the phone won't boot into any mode, recovery is dead, fastboot is dead....
same problem hope somone help us
also share ur backup please
darkglobe87 said:
Hey all.
Easy question I hope! I've been following the guide to unbrick MTK devices, and have managed to get an original factory ROM to flash to the phone, green tick in SP Flash Tools. However, the phone still won't power on at all, save for the light if plugged into usb.
The ROM I've been using is an original factory rom named "ONE-TOUCH-4015X_POP_C1_FULL_STOCK_BACKUP" which is readily available online. I'm not sure what I did to brick it in the first place, but it was within SP flashtool. I May have formatted accidentally.
If someone coudl help I'll try to provide all logs or files requested but please tell me where these could be found as I'm not that good with flash tool.
To confirm the phone won't boot into any mode, recovery is dead, fastboot is dead....
Click to expand...
Click to collapse
Did you ever get the above rom to work? If so what did you do? Or did you find another method to unbrick the phone? Thanks.
Managed to unbrick my 4015 using Mobile Upgrade S 4.3.0 from the Alcatel Website.
http://www.alcatelonetouch.com/global-en/support/download/one_touch_idolx.html
Very simple to use, just install and follow instructions.
darren1 said:
Managed to unbrick my 4015 using Mobile Upgrade S 4.3.0 from the Alcatel Website.
http://www.alcatelonetouch.com/global-en/support/download/one_touch_idolx.html
Very simple to use, just install and follow instructions.
Click to expand...
Click to collapse
no work this version. yes 4015 but no 4015x
Sorry I should have put my phone is a 4015X not 4015. The application does say 4015 which I selected and all went well.
my 4015x no update, it not load, only work flash mode connected to pc and no work mobile upgrade.
4015X Partitions
the 4015x has a different set of partitions to the older (dual sim) 4015
i have a modded rom (kitkat), a modded stock recovery (as stock is also wrong, wont mount data) and a modded cwmrecovery.
i will be posting these soon
i will create a new post for the 4015x version
and will also be asking for other versions of the 4015 users to post me there partition trees and i will repack some recoverys and some roms for you all
note: there are 6 versions that i have seen and they may all have diff tables
hope these will help the pop c1 community
recoverys and rom
Stock Recovery (Fixed)
https://drive.google.com/file/d/0B4ZKFXlQiHioVUExRW1sZkdzSFk/view?usp=sharing
CWMRecovery (Fixed)
https://drive.google.com/file/d/0B4ZKFXlQiHioUTJqOTMtbUNPTEU/view?usp=sharing
kitkat-cm11-modROM.zip (Fixed)
https://drive.google.com/file/d/0B4ZKFXlQiHioUUI3V2Jsd0lTN1k/view?usp=sharing
(I am currently using this rom my self and all seems to be good except vibration, it also thinks its a dual sim but not causing a probb)
Hello!
This thread is quite old but near my case.
I have an Alcatel Pop C1 4015X (cpu MTK6572M) that can't start at all (only the power LED is ON).
I have a backup of this device made with "SP Flash Tool V5.1532.00" but I've error "not enough space" when
I try to restore it.
Same error when I try to restore just one file.
For example, I've tried to restore only the "Stock Recovery" you give above.
I do this:
- I start Flash_Tool v5.1532.00
- I open scatter file from my backup done with the same tool
- I unselect all pieces of the backup except "Recovery" and I browse to the "Stock Recovery" file I've dl
from this thread.
I've got this error : "not enough storage space (1011)"
What could be the problem ?
I makes me totally crazy !
By advance, thanks for your help.
Regards,
Freeman.
Fr33M4n! said:
Hello!
This thread is quite old but near my case.
I have an Alcatel Pop C1 4015X (cpu MTK6572M) that can't start at all (only the power LED is ON).
I have a backup of this device made with "SP Flash Tool V5.1532.00" but I've error "not enough space" when
I try to restore it.
Same error when I try to restore just one file.
For example, I've tried to restore only the "Stock Recovery" you give above.
I do this:
- I start Flash_Tool v5.1532.00
- I open scatter file from my backup done with the same tool
- I unselect all pieces of the backup except "Recovery" and I browse to the "Stock Recovery" file I've dl
from this thread.
I've got this error : "not enough storage space (1011)"
What could be the problem ?
I makes me totally crazy !
By advance, thanks for your help.
Regards,
Freeman.
Click to expand...
Click to collapse
What i did was i used SPFT to flash a backup i found online. Can't post links, just google "ot 4015X Original SPFT ROM", what i used was the algerian rom. Then i flashed the EE stock rom. My own backup didn't flash back correctly either, that's why i used that one i fould online.
4015X unbricked !
Hello,
I found a similar solution here (replace * with . to get a correct http link):
forum*gsmhosting*com/vbb/f317/ot-4015x-firmware-arabic-bulgaria-africa-kenya-1946694/index2.html
It took me hours to find good stock ROMs (bulgarian & arabian then french via OTU) !
You'll have to "play" with pro_info and scatter file...
Good luck to all to unbrick your 4015x !
Regards,
Freeman.
how to partition system storage space of onetouch pop c1?
HELP!!
TLDR:
I bricked pixi 4-6 8050e by flashing it with SPFT [format all + download] option. Can't go into fastboot, but I can still flash using SPFT). Help please!
At first I was just trying to get root. So I needed to unlock BL the flash recovery (twrp).
But recovery image was wrong so I was stuck at bootloop. I found that there is another working recovery (ctr).
I flashed again, but I'm still stuck at bootloop! At this point all I want is to get the device working, root be damned!
So I tried to find a stock ROM and extract the recovery.img from it. I flashed the stock ROM with SPFT, but I'm still on bootloop.
At this point I'm sweating a lot, but I can still access fastboot.
Then I tried to flash the WHOLE stock ROM by using SPFT [download] option.
After that, I was still stuck at bootloop. Worse, the boot animation for alcatel is now ****ed up, it is not showing properly!
I don't know what to do, I downloaded another stock rom, only to find out that it has the exact same files by using hash checker.
I flashed it 1st with [Download] option but nothing changed.
So I flashed again using [Format All + Download] option on SPFT. This is where I really ****ed up. I now can't even access fastboot! But I can still flash using SPFT.
I downloaded final ROM from xda, but again, it has the same exact files! I again tried to flash it, but nothing still works, cannot even go to fastboot.
I even downloaded Alcatel's mobile upgrade s program to fix, but it says "Read terminal information failed". I'm guessing that it the downloaded preloaded.img from the supposedly stock rom is wrong.
I don't know what to do next.
Please help! If any of you have a stock image that is not the same with kirito9's (link), please I NEEED IT!
Dear all,
I have flashed the wrong stock rom on my tablet (lenovo). Now i have the right stock rom, but when i use SP tool to flash i get the error "Chip type not match. Target chip is MT6580. load scatter chip is MT6582."
First i flashed stock rom Lenovo tab 3 710I, i tried to boot, but i got only a black screen with vibrating every 2-3 seconds. Then i knew the right model for the device, which is lenovo tab 2 A7-30HC , so i tried to flash it but i got the "chip type not match" error.
could you please help me solve this problem?
best regards,
Format the device with wrong scatter file and after that load orginal one and try
also try flashing recovery (if avilable ) via adb
Trex2017 said:
Format the device with wrong scatter file and after that load orginal one and try
also try flashing recovery (if avilable ) via adb
Click to expand...
Click to collapse
good idea.format the device and then re flash the correct firmware.
Also have the same error
I also have the same thing going on. except that i haven't flashed the device yet. I have an AG Boost Dual SIM. I downloaded the ROM from firmwarefile[dot]com but the chip type of the phone is MT6572 While the scatter of the ROM has MT6580. Should i look for another ROM or is there some kind of hacks and back doors to flash the same ROM?
how to format with wrong scatter?
Hey people, so I wanted to unbrick my phone by formating the data so I went all smarty pants and used SP Flash Tool and formated the whole flash except for the bootloader. Now I get an error message when I boot saying "Download not completed!" with the error code 0x99256658 after I flashed the whole stock rom (B.53). Did SP Flash Tool get rid of something extra? Or is the rom maybe missing something? Can anyone please help me unbrick it? That would be very nice. Thanks for reading
I found a solution. I need an oppo_custom.img for the realme 6. Can someone tell me where I can get it please?
EDIT: Nevermind I found it in the ROM files and I flashed it but I'm still getting the same error. Anyone any idea?
EDIT2: Somehow flashing OPPO F9's oppo_custom.img gets me to recovery but it doesn't load the OS
Hi am sick right now caused i messed up i trying to google frp my sm-a315g/dsl device and it kept freezing so i decided to try flashing individual files (yeah I should get some good licks for that ) so i started with the bootloader file it was successful but now the phone won't turn on at all not even charging. I tried brom tp but i don't have the right scatter files. Can anyone help me SOLVE my problem that I caused.
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Teddy Lo said:
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Click to expand...
Click to collapse
The phone not reading to work with Odin thats why am trying via Brom TP unless there is another way to get it show on Odin, cause the phone is not powering on to enter download mode.
Check SP Flash Tool with MTK drivers for MediaTek Helio P65 (MT6768).
Factory images fastboot stock firmware to be downloaded (not odin)