Hi !
Today the screen of my Cubot One went black, when I turn it on and off the problem remains, I can still lock the screen.
I downloaded a ROM and I tried installing it with both "Smart Phone Flash Tool" and "SP Flash tool" (Or maybe it is 2 different versions of the same software).
I load the scatter file but when I hit the "download' button nothing happens...
Can you please help me with my problem ?
Edit: Now I get this message: "ENABLE DRAM FAILED!"
rscredin The
up
My phone is experimenting some similar issue
I tried to change the recovery in my cubot one (the grey one), supossedly it has the mt6589t SoC, but every try failed, then I thought to change the firmware (the firmware the phone had was G800_CUBOT_D1_V1.3_"some_number_here"_MJK), with the firmware G800_CUBOT_D1_V0.8_20140124_MJK, i employed the SP tools without problem, the download was succefully, the i put the battery on again, then i switched it on, the telephone started, the screen lites on, but the screen keeps black, it sounds like boots normally, even the unlock screen sound normal, but there is no image in the screen, I've looked for the newer firmware everywhere but I did not found it, somebody could help me, please!!!
The firmware I used to flash the phone succesfully was the cubot one turbo available in the needrom page. Maybe the newer versions of cubot one have a new graphic chip or something different.
The error...
Alastor56 said:
Hi !
Today the screen of my Cubot One went black, when I turn it on and off the problem remains, I can still lock the screen.
I downloaded a ROM and I tried installing it with both "Smart Phone Flash Tool" and "SP Flash tool" (Or maybe it is 2 different versions of the same software).
I load the scatter file but when I hit the "download' button nothing happens...
Can you please help me with my problem ?
Edit: Now I get this message: "ENABLE DRAM FAILED!"
Click to expand...
Click to collapse
The cause of this error is trying to flasn an incorrect ROM image in the device, there are a lot of versions of cubot one, did you tried the roms in needrom_com?
Same prob.
I've same problem. Only black screen (but sounds like boot normally). Did anyone resolve this issue?
any solution found?
abanuelosh said:
The cause of this error is trying to flasn an incorrect ROM image in the device, there are a lot of versions of cubot one, did you tried the roms in needrom_com?
Click to expand...
Click to collapse
hi i have same problem, i install the rom that download of needrom but not work fine, i install the rom succesfull but my screen is black, phone turns on, I can unlock and lock it, volume buttons work, but there is simply no image.
are you have any solution?
Hello everyone!
I have the Vido N90 FHDRK. I flashed a rom from another tablet without changing the kernel and probably I bricked it.
At first I had only a light dark screen when I opened it without any logo. Then I tried to flash the old working rom, but the download of firmware on batchtool failed. Now, when I connect it with my pc, the first box turned to blue for a while and then to grey. I cannot flash another rom. And the tablet cannot open at all. Without a logo or anything.
Any help?
Anyone? I cannot find anything to unbrick N90 FHDRK....I tried to open the case from behind, but there is only a border that seems to be stucked with glue. I couldn't open the case.
Hi, i have a Blu Life 8 (MT6592) and this is my story...
After an apparently soft brick that endend in a Infinite Black Screen Bootlog i tried to make a Format with SP flash tool (that was idiot by my part, without any meeting of this) and now a i have a FULL HARD BRICKED PHONE NO FAKE 4K...
But i have the hope of you guys can help me.
The phone doesn't turn on, when i connect the usb cable it doesn't seems like if charging or nothing, apparently dead no?... Well this is the magic thing, when i try to Flash again the Stock ROM it Works!... yes, i looks like if doing something, complete the progress bar of flashing and says it's "OK" but really doesn't nothing, still not boot, no charging log, no blu logo, no android logo... What you think?
hi everyone, i have a big problem with my box, its just turned off by itself (on original rom) and won't boot, stuck on logo. ive tried wipe via recovery, all custom roms with ABT (its always stuck on 7% formatting) and Burn Card Maker (stuck on little android dude, no progress). i found someone with this same problem on freaktab but he is given up already. box is visible by ABT. what more can i do? heeeelp guys :crying:
Hi guys, I have a Sunvell T95q and was trying some custom roms to see what was the best for me.
But on one day when watching a movie the box rebooted alone and never cstarted again. Meaning, even after flashing 10 different roms, original included, the box gets allways stuck on logo. No problem flashing, the problem is that never passes the logo after a star.
Any ideas to get it back to normal life?
Thanks in advance!!
Factory reset or clean dalvik&cache after flashing - maybe?