I am not the developer of this mod.
rz_end doesn't use XDA. So I am sharing the mod here. All credits go to original developer.
This Gcam is specifically modded for Mi Note 10.
Link to download the latest version:
https://f.celsoazevedo.com/file/cfiles/gcm1/HyperCam-RaizenA-10.apk
Note: Use Config file to get the desired result. Don't complain without loading configuration file.
Config File for latest version:
https://www.celsoazevedo.com/files/android/p/f/2020/04/ЯΛIZΣП-MN10.xml
How to Load/Save XML Configs:
https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
Link to download other versions of the mod:
https://www.celsoazevedo.com/files/android/google-camera/dev-rz_end/
Changelog:
2020-04-22
Remodeled Interface.
New Lib Raizen.
Fixed Manual Focus (Credits to Fu24, and many thanks for Help).
Thanks to Arnova, Urnyx05, UltraM8, The_Dise and all others.
To avoid issues, clean app data before opening it for the first time.
The app make good pictures with the config. Thanks
Max resolution is 12mp for the main camera in 4x3 and 9.1mp in 16x9.
It didn't even manage to take a photo on mine after pressing the button multiple times - it grayed it out for about 3 seconds, came back and nada.
No 3.7x, no astro setting. Not sure how it's modded for the Mi Note 10.
MacGuy2006 said:
Max resolution is 12mp for the main camera in 4x3 and 9.1mp in 16x9.
It didn't even manage to take a photo on mine after pressing the button multiple times - it grayed it out for about 3 seconds, came back and nada.
No 3.7x, no astro setting. Not sure how it's modded for the Mi Note 10.
Click to expand...
Click to collapse
Same here, resolution was stated as 12mp but saved as 27mp. So it's fine.
Quality during day is same as stock, during night barely better.
For me, no aux switch is a no no
Tested it, it's a GCAM 6.2 -based one. That means no instant HDR, it churns quite a while. Biggest issue (aa dealbreaker) for me was the b0rked motion photos. Otherwise, a good camera, although somewhat slow and hard on the battery.
@veenaprem Thread is being closed as a GCam thread already exists in the forum. Request you to use the existing thread for further discussion. Thanks, and good day!
Link to existing thread: https://forum.xda-developers.com/mi-note-10/themes/gcam-t4005605
Regards,
shadowstep
Forum Moderator
Related
Which one of the best gcam apps for Redmi 5 plus?There have no problem issue like (Force stop,Front cam potrait,Back cam potrait)
Please give me the link.....
Depends on the rom you are using. If you are using an Oreo rom with camera 2 enabled, you can install the latest GCam by Arnova, here's the link: https://www.celsoazevedo.com/files/...leCamera-Pixel2Mod-Arnova8G2-V8Final-test.apk
mahmud19922 said:
Which one of the best gcam apps for Redmi 5 plus?There have no problem issue like (Force stop,Front cam potrait,Back cam potrait)
Please give me the link.....
Click to expand...
Click to collapse
This here is by far the best version I used on my Redmi 5 Plus with MIUI 9 (Android 7)
Sorry, I am not allowed to post links yet
drive.google.com "slash" open?id=1h_82pHyqg9LHnP4LwVH8IO9wImzpFYt8
Trust me, I tried a bunch of ports and EVRYONE had a force close here and there. It was very annoying. With this version, everything works and had only a crash when I first started the app.
Runs perfect since then and made hundreds of pictures since then.
I tried these settings:
Auto-exposure mode: default
nonZSL HDR + underexposur multiplier: 0%
Advanced settings-> Main camera:
Base model: 2 xl pixels (all are blurry except with pixels and nexus 6)
Tuning back cam-> apply custom denoise params, check it and bring it only: custom luma denoise low light: 2.8
Tuning front camera:
base model: nexus 6p
apply custom denoise params to check and leave as it is.
minimal hdr + smoothing disabled (loses a lot of quality)
HDR + parameters: pixel 2017 faster zsl
hdr + camera config: pixel 2017 Zsl hdr +
Advanced settings HDR +
Final quality: 100%
NonZSL HDR + antibanding mode: 60hz
Use Hexagon DSP: yes
darkgizmo please could you tell me the name of the author/version of the gcam you use?
The text of the link you wrote doesn't work if I paste it into Google. Thanks
Nathan971 said:
darkgizmo please could you tell me the name of the author/version of the gcam you use?
The text of the link you wrote doesn't work if I paste it into Google. Thanks
Click to expand...
Click to collapse
I found it in the thread "[APP][FEEDBACK] Arnova8G2's Google Camera Port" on page 16. The developer is called Saneklic, he is russian, I found a russian forum, but i can no russian, so i am not able to
download the newest version (besides that, the version I got runs perfect, so I think I won't upgrade anytime soon).
Just type this in your adressbar:
drive.google.com/open?id=1h_82pHyqg9LHnP4LwVH8IO9wImzpFYt8
Ok, found the developer page:
celsoazevedo.com/files/android/google-camera/dev-saneklic/
Just type this in your adressbar:
drive.google.com/open?id=1h_82pHyqg9LHnP4LwVH8IO9wImzpFYt8
Click to expand...
Click to collapse
Really thanks, it works, tomorrow I'll try it!
I really want / need to install gcam on my redmi note 5 plus but I had a problem with the bootloader unlocking, I no more can use the Plex vpn for free and I don't want to pay for it.
I couldn't find another trial vpn china based.
Somebody know the way of pairing the mi account with the phone without vpn - and furthermore why Xiaomi make things this way?
I mean I created an account from Italy but I can only use it from China? Absurd!
Please help me!!!
If I'm not in the right place please let me know.
Mar 12th, 2019
So it has been awhile since I tinker with Gcam, and now that I have finished the modding of it and no longer have my Mix 3, I will upload the final copy of Gcam. As usual thanks to everyone from defcomg, cstark27, san1tyy, xtreme, bsg, zoran.
https://drive.google.com/open?id=1rBUkxfz2IlG_0SGaTlJ2G6mL-16Bx8LY
Changelog:
-added corrected black level for most shots. Bl corrected for 1/30 shutter so you will have slight tint on slow shutter at extreme low light conditions.
-modified xlib2 to remove tint, and noise
-new menu and icons
Bugs:
-sometimes hdr+ enhanced at 40 frames or 36 frames will not save the first shot, but shot afterwards will save. Tried to find a fix but cannot so use lower frames for most stability, ie.. 25 or so.
Feb 7th, 2019
Update: https://drive.google.com/open?id=1IKGyubiBrdqWVp_gQfmTLaA8HErtoyk7
-added lens blur mode courtesy of san1tyy to take picture of objects and animals
Recommended settings:
-Rear camera set to Pixel 3 XL
-Processing set to 2018 zslr hdr+
-set frames to 40 for min and max for best low light shot (will take some time to process), or set to 20 for both for quick shots
-hdr+ enhance and night sight set min iso compensation to 1/3 or 1/4 s for best shot, but hands have to be still as possible
-exposure compensation to +0.6
-chose Xlib for lib choice
So several have stated that shutter isn't working on global rom, and some other Mix flagship such as Mix 2/2S doesn't work so with help from san1tyy, metadata was cleaned up and should be working now
https://drive.google.com/open?id=1hu9tm0ZSMI3F645rSr2wXq3HhMRP5DUp
Feb 4th, 2019
After bunch of trials and error, lib modding here and there, finally got a working stable version with some new changes with help from Zoran, Savitar, Xtreme, and San1tyy . Lib modding for awb using different calibrations from various devices would not play nice due to either unsaturated or nuclear saturation, especially from S9 series, so I just left it stock for now. Here's the new apk: https://drive.google.com/open?id=1scOaLD8_eeZEdlaR6q1lCXzUSLtb6miB
Changes:
-added compensation exposure
-new lib (Xlib) with sharpened decreased
-frames changed to 40 instead of 45 due to exif cache size error and won't save image
-qc color awb works finally without the yellow tint, thanks big time to Savitar
-UI changes
enjoy guys and donation are welcome so I can get more devices to work on. Paypal: [email protected]
The iso slider had an issue, and wouldn't capture. Also sabre and pixel 3 awb was not included so this version is updated to include it
https://drive.google.com/open?id=11ORyhdqIjFXNlZFsdfA0NDEW8auU3aNr
So sliders had some issue of not triggering for both iso and focus. After multiple test trials, san1tyy and defcomg pulled through again and got it working! APK is also cleaned up to only include Edzman v3, savitar v2, and stock google libs. Enjoy guys.
https://drive.google.com/open?id=1Mtr1GB2aGlBme42Fv82f9Co9Nyd20PXY
https://drive.google.com/open?id=1jfKHqHjahS-K8-GJz04BjxgphyTFmvmo
Make sure you are on the latest global beta from Xiaomi, or the latest beta from xiaomi.eu for camera not to lag in viewfinder and processing HDR+. This mod is based on BSG's latest version with working telephoto lens. Thanks to the great defcomg, xtreme and san1tyy over at telegram, here are the changes:
-added 45 frames, and 50 frames. The 50 frames will cause viewfinder to flicker like crazy but it does works.
-removed ISO limit of 9600 because stock camera can go up to 19000+ iso
-long exposure added for up to 32 seconds in hdr+ enhanced and night sight
-manual focus sliders and exposure sliders
Slo motion should work, motion photo do not work because of lib issue from xiaomi. For configs, use Pixel XL for rear camera, processing use 2018 zlsr+, front camera can use Pixel 3 XL. Using Pixel XL gives correct awb vs Pixel 3 XL which gives a true to life color at night time with low lighting (ie.. 5 to 10 lux).
Night Sight Working on China Stable 10.2.1.0
Thanks
Camera works great just laggy in night sight
jvs60 said:
Camera works great just laggy in night sight
Click to expand...
Click to collapse
use xiaomi.eu rom or beta chinese
I am on the official global rom 10.0.11.0
I'm on official global ROM as well and the view finder is incredibly laggy
global rom will do this, you need to be on global beta or xiaomi.eu rom or chinese beta rom
Any news on the global stable update?
I find the Xiaomi forums a pain to navigate otherwise would check myself heh.
Hi xterminater07, Thanks for your work! Its impressive! I use this version of gcam for my LG G6 and works great but I have some doubts about the 32s long exposure. Could you tell me what file inside the gcam package can I modify to try other configurations? I decompile the apk but I cant find where the parameters are for the amount of seconds depending on the lux. Thanks!!!
PD: Sorry for my bad english
All the lags and slowness disappeared after the latest global update (received the ota and updated an hour ago), now when I tried night Sight, taking multiple shots in a row etc etc there are no lags whatsoever anymore for me!
I was just about to flash the EU rom to fix the lags but no need anymore!
lv-88 said:
All the lags and slowness disappeared after the latest global update (received the ota and updated an hour ago), now when I tried night Sight, taking multiple shots in a row etc etc there are no lags whatsoever anymore for me!
I was just about to flash the EU rom to fix the lags but no need anymore!
Click to expand...
Click to collapse
Me too! I don't know what they did but its not lsggy anymore!
---------- Post added at 06:50 PM ---------- Previous post was at 06:48 PM ----------
Does any one find that you have to tap twice on the camera button to take a pic? Very annoying
Thanks for this great port! Is it possible to implement the option that the portrait photos wont be saved in a separate folder? In the port for Pocophone it is...
Thank you again!
How do I enable the telephoto lens?
Sorry, just figured it out. Enable Aux camera in BSG settings, then double tap change camera icon (the one to change to front camera). It changes from back normal > front > back telephoto.
reasonablebasis said:
Sorry, just figured it out. Enable Aux camera in BSG settings, then double tap change camera icon (the one to change to front camera). It changes from back normal > front > back telephoto.
Click to expand...
Click to collapse
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
reasonablebasis said:
How do I enable the telephoto lens?
Click to expand...
Click to collapse
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
I noticed that it does not work for small objects, but works well with people. I guess the subject has to be far enough for portrait mode to actually work.
Regarding the telephoto lens, there seems to be no noise reduction applied to it, unlike the main lens. This results in very grainy photos especially during the night. Can you add noise reduction, or an option for it for both lenses in the settings? Thanks
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
Works fine for me, but only for actual portrait photography. It can't recognise objects.
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
have you tried clicking on the resulting image, if you open it, you will see a blurred one and the non-blurred editions.
so the resulting image is like a folder that when you open, it will have the blurred edition inside it.
Ive discovered that the newest Gcam port from the Pocophone thread also works on our Mix 3! It has more options like save in camera folder when taking portrait shots and so on... Everything works, is there any downside using it?
UPDATE: I haven't really followed this thread since I don't have an S10 anymore, however, just a heads up telephoto now works with the Snapdragon S10/Note 10 series and Gcam! Gcam can be downloaded in my S20 thread here: https://forum.xda-developers.com/t/gcam-working-with-s20-ultra-telephoto.4200277/
Now with Wide Angle and Telephoto Camera Support!
All credits go to Arnova8G2, CStark, Fizwiz, Xenius9, Urnyx05
Benefits:
Gcam offers less aggressive noise reduction and oversharpening. Under daylight things might not look too different but it's a lot better for low light, especially for finer details like carpets, hair, fabric texture. I've attached some comparison shots. The file names will indicate which camera was used for the pictures.
Regarding 6.1 vs 6.2 vs 7.0 vs 7.2:
6.1 could be more stable and allows you to save profiles that you can swap between (for instance if you have a setting for indoor and outdoor). However 6.2 is faster, possibly better processing algorithms. 7.0 is faster still and even better algorithms. 7.0+ also ads astrophotography option which is night sight but even better! 7.2 works on Android 10 only and should improve upon 7.0.
GCAM 6.1.0.021 Base
Download Arnova's Advanced 1.7 here: https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
then download the XML config attached to this post.
Instructions for applying the XML file can be found here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
What works:
- Aperture switching for main camera (settings > Samsung CameraAPI2 > toggle "Switch to 2.4f aperture)
- Motion photo (have to use google photos as gallery and only limited to 1080p resolution)
- Night Sight
- Portrait mode
- Wide angle camera (hold the toggle camera button to switch between wide and regular rear cameras, press to switch between rear camera and front camera)
GCAM 6.2.030 Base
Download Arnova's Advanced 2.2 here: https://forum.xda-developers.com/devdb/project/dl/?id=31714
Go to Settings > About > Enable Advanced Features
Settings > Enable AUX
Settings > HDR+ Control > Image Format > YUV_420_888
Quality HDR+ > Super High
Custom Libs > Eszdman v3 Beta
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight
- Portrait mode
- Wide angle camera (toggle button at the bottom left)
GCAM 7.0.009 Base
Download Xenius9's GCam_4.0.191101.0729build-7.0.009_x9_s9s_mod_0.43.apk here: https://drive.google.com/drive/folders/12qfHQ-oq4vrHCWFkNaP6lNHMoDB31SNy
To enable astrophotography, go to settings, developer settings and make sure nightsight.extended_tripod and nightsight.extended_iterable_burst is enabled.
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight (with Astrophotography)
- Portrait mode
GCAM 7.2.010 Base for Android 10
Download Urynx05's gcam mod here: https://forum.xda-developers.com/showpost.php?p=81499445&postcount=1197
then download the XML config here: https://www.celsoazevedo.com/files/android/p/f/2020/01/s10_snap.xml
Instructions for applying the XML file can be found here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight (Astrophotography can be enabled but max shutter is only like 2 seconds, not enough for stars)
- Portrait mode
- Wide Angle Camera
More development info can be found in the original app page.
https://forum.xda-developers.com/apps/google-camera-mods/app-arnovas-google-camera-port-t3862448
Thanks for this however how do I know if the XML file you posted is the one that's actually being used
I have downloaded this but nightsight doent work but the base camera does. Some of the other features crash the app. Im using s10+ snap.
Ratzinc said:
Thanks for this however how do I know if the XML file you posted is the one that's actually being used
Click to expand...
Click to collapse
Rataba said:
I have downloaded this but nightsight doent work but the base camera does. Some of the other features crash the app. Im using s10+ snap.
Click to expand...
Click to collapse
Did you guys apply the XML file after copying it to where it needs to go? Detailed instructions here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
Followed the instructions and it seems to be working fine so far on my S10, although I haven't done extensive testing.
How do you switch between apertures? It doesn't seem obvious to me.
Any reason this wouldn't also work on a Snapdragon S10+? Thinking about giving it a try now...
---------- Post added at 11:11 AM ---------- Previous post was at 10:42 AM ----------
Installed and verified basic functionality on my S10+. Took a couple of night sight pictures and they turned out good. Will do some more testing. Thanks for the information.
Update: I'm seeing issues when switching between different modes. For example, the picture freezes whenever I go into portrait mode. Other modes work sometimes, but display a black screen other times. The app doesn't freeze or crash, and if I switch to another mode then switch back, sometimes that resolves it.
Avohkah Tamer said:
Followed the instructions and it seems to be working fine so far on my S10, although I haven't done extensive testing.
How do you switch between apertures? It doesn't seem obvious to me.
Click to expand...
Click to collapse
It's in Settings under Samsung CameraAPI2.
mrsmithb said:
Any reason this wouldn't also work on a Snapdragon S10+? Thinking about giving it a try now...
---------- Post added at 11:11 AM ---------- Previous post was at 10:42 AM ----------
Installed and verified basic functionality on my S10+. Took a couple of night sight pictures and they turned out good. Will do some more testing. Thanks for the information.
Update: I'm seeing issues when switching between different modes. For example, the picture freezes whenever I go into portrait mode. Other modes work sometimes, but display a black screen other times. The app doesn't freeze or crash, and if I switch to another mode then switch back, sometimes that resolves it.
Click to expand...
Click to collapse
To fix portrait mode freezing, go to Settings (top section, mod settings) -> Advanced -> FIX -> Viewfinder Format. Then select YUV-420_888 (default).
Very good. The viewfinder fix seems to have worked for portrait mode, and helped with all other modes as well.
Any other settings changes you would recommend making to optimize performance?
Which photo is from the stock cam vs gcam?
I took a few pics just now outside with default camera and then with Google night sight. Google cam pics definitely a little brighter, and much clearer, with more detail than the default cam. Quite pleased.
Got it to work thank you. Had to restart my phone, now everything works.
Snapdragon?
Yes i have the s10+ with snap
mrsmithb said:
I took a few pics just now outside with default camera and then with Google night sight. Google cam pics definitely a little brighter, and much clearer, with more detail than the default cam. Quite pleased.
Click to expand...
Click to collapse
Night sight is phenomenal. To the point where I use it almost exclusively even in daylight on my Pixel 3. Can;t wait for S10 with gcam port.
How is the shutter delay using the gcam port on the S10? On LGs where I have used gcam, the ZSL would not work and that was the only downside.
When i took picture with night sight.my phone restart it sekf.
I envy you guys. I have got the exynos version and stock cam quality is ****. Miss my pixel 3.
Sent from my SM-G973F using Tapatalk
xxaarraa said:
Night sight is phenomenal. To the point where I use it almost exclusively even in daylight on my Pixel 3. Can;t wait for S10 with gcam port.
How is the shutter delay using the gcam port on the S10? On LGs where I have used gcam, the ZSL would not work and that was the only downside.
Click to expand...
Click to collapse
I will check the shutter delay today when I have time. I've only used it for night shots as of now since that was the primary advantage it has over the samsung cam software. I know as of right now, this version doesn't support the wide angle lens, which means it's necessary to keep both sets of software. HOwever, I read in another thread (here or on reddit) that there is now a gcam version that works with JUST the wide angle lens. So hopefully they can combine these and give us a fully working port in the near future.
thanks i will try soon.
On the snap my stock cam sucks also. This google cam and open camera destroy it
Hello haydn users,
I am sharing a version of google camera port with slow motion working, pretty much everything works.
STEPS :
1) Download the apk attached.
2) Install the apk and open the app.
3) press the options icon at the top and press the settings icon.
4) then go to advanced->stream config->Enable OP mode
5) make sure set sensor shows "Back Main" and then scroll down to slow motion option in the list, open it and choose OpMode (default) from the list.
6) go back to main screen slow motion should be working now.
NOTE :
1) Slowmo will only work with main sensor only, if you tap the ultrawide (0.6) or macro (2x) button in that mode app will crash.
2) this app has ultra wide mode (0.6 button) and macro lens is enabled using 2x button !
Link :
https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl12/ (use cameight version)
As there are too many links in the page, I have attached the correct one below.
Tested on Elixir ROM (android 13), let me know if you get into a problem with others ROMs
Cheers.
PS - let me know if you still encounter any problems or find a better solution for Gcam thanks.
asad007 said:
PS - let me know if you still encounter any problems or find a better solution for Gcam thanks.
Click to expand...
Click to collapse
On telegram I have found this gcam with the attached settings provided by Hasli. But I still think the colors are too dark/saturated...
michielm74 said:
On telegram I have found this gcam with the attached settings provided by Hasli. But I still think the colors are too dark/saturated...
Click to expand...
Click to collapse
That's the issue with lot of gcam versions I tried too, colours are not accurate and overall images look washed out. I haven't found one that works well. If anyone knows one that works well please post here.
harshu0101 said:
That's the issue with lot of gcam versions I tried too, colours are not accurate and overall images look washed out. I haven't found one that works well. If anyone knows one that works well please post here.
Click to expand...
Click to collapse
Is this better? It's a config for LMC R15.
good! very useful
Did someone tried any gcam version for the zenfone 9? The cameras of this phone are suck, over sharpness, selfie? On paper good selfie sensor but the results are poor
Oversharpening effect on Zenfone 9 is very strong. Every Zenfone 9 user should inform Asus that they aren't happy about it on Asus forums:
ZenFone 9
zentalk.asus.com
If nobody reports anything on their official channels then Asus will think people like it
Try out the latest BSG gcam mod:
BSG GCam APKs - Google Camera Port
Modified Google Camera app by BSG.
www.celsoazevedo.com
Working front, rear cameras. Haven't test everything. But so far so good. Wide angle works too. No config applied
The stock camera auto HDR pictures are way to overexposed. This is just an example I took this morning. I prefer the gcam output.
I will post about this in the Asus forum once I have more time.
Cheers
avivasaf said:
Did someone tried any gcam version for the zenfone 9? The cameras of this phone are suck, over sharpness, selfie? On paper good selfie sensor but the results are poor
Click to expand...
Click to collapse
You can try lastest Wichaya's 8.1 v1.6 Gcam:
Wichaya GCam APKs - Google Camera Port
Modified Google Camera app by Wichaya.
www.celsoazevedo.com
The GCam makes photos look way better - how ever I'm not knowledgeable enough about the configs to know how to fix. The 8.1 Wichaya version seems to work the best. Though video modes still feel sluggish in the viewfinder. A lot of delay from moving the phone.
I also can't select the main 773 sensor in the noise reduction section. It's simply not there as an option.
Oh well. It seems to work otherwise. Slow motion and 50MP RAW has been disabled for now from Wichaya.
This guy evidently got GCAM working and notes improvements over native camera app.
Has anyone how things are with android 13? The Gcam is way better, but cannot be used for all purposes, I wish Asus just fixes the heavy post-processing so I can use the native app which is great by the way.
I just joined Android 13 beta program from my Zenfone 9. No ROM yet, but will let you know when they start rolling out.
I made a config for my Wichaya 8.1 and created noise model with some other adjustment to the settings
Enabled 50MP for video and slow mo only (partially working)
Just my 2 cents for wichaya.
The photo is tricky (but ugly) and the purpose was to demonstrate that the Asus process is not on par with the Gcam for color rendering and HDR.
The reds (box, chair and dress) are much more realistic on the Gcam shot. Same for the woody wall.
And look at the sky....
mickey36736 said:
I made a config for my Wichaya 8.1 and created noise model with some other adjustment to the settings
Enabled 50MP for video and slow mo only (partially working)
Click to expand...
Click to collapse
The 50M dont work
Did anyone get a gcam with working portrait mode? For me it doesnt apply the blur effect. I have to manually end the blur in Google Photos after
mike freegan said:
Did anyone get a gcam with working portrait mode? For me it doesnt apply the blur effect. I have to manually end the blur in Google Photos after
Click to expand...
Click to collapse
Works for me.
I'm using Wichya's Gcam mod + zenfone8/9 config. You have to take the photo in "Portrait" mode.
eVen123 said:
Works for me.
I'm using Wichya's Gcam mod + zenfone8/9 config. You have to take the photo in "Portrait" mode.
Click to expand...
Click to collapse
I'm a little new to this. How do I apply that config?
mike freegan said:
I'm a little new to this. How do I apply that config?
Click to expand...
Click to collapse
GCam_8.1.101_Wichaya_V1.6.apk
Wichaya8.1-ZF8-V5.xml
In the app, you Setting -> Advanced -> XML config -> Import XML config (and you import it).
Before it will allow you to import, you also have to give the gcam the "All Files" permission.
eVen123 said:
GCam_8.1.101_Wichaya_V1.6.apk
Wichaya8.1-ZF8-V5.xml
In the app, you Setting -> Advanced -> XML config -> Import XML config (and you import it).
Before it will allow you to import, you also have to give the gcam the "All Files" permission.
Click to expand...
Click to collapse
Thank you! Where do you find the config files?
eVen123 said:
Works for me.
I'm using Wichya's Gcam mod + zenfone8/9 config. You have to take the photo in "Portrait" mode.
Click to expand...
Click to collapse
Oh I worked out the problem. It only applies portrait mode to photos of people, not to other objects. I remember this was the case with the original Google Pixel 1 that I had.
Is it the same for you?
It doesn't pick up my dog, which is a bummer.
mike freegan said:
Oh I worked out the problem. It only applies portrait mode to photos of people, not to other objects. I remember this was the case with the original Google Pixel 1 that I had.
Is it the same for you?
It doesn't pick up my dog, which is a bummer.
Click to expand...
Click to collapse
Sadly, I don't have a pet to check
It works on my front and rear camera in vertical or horizontal orientation. It only works this way in "portrait" app setting (so chosen from between Night Sight/Portrait/Camera/Video/more...).
I've provided you the link to the config file too. It's an .XML file in the previous comment.
eVen123 said:
Sadly, I don't have a pet to check
It works on my front and rear camera in vertical or horizontal orientation. It only works this way in "portrait" app setting (so chosen from between Night Sight/Portrait/Camera/Video/more...).
I've provided you the link to the config file too. It's an .XML file in the previous comment.
Click to expand...
Click to collapse
Yes I got it thank you very much. I have a Pixel 6 too, and the portrait mode on that (and camera in general) is much better so I may just stick with that for now.
@eVen123 the config you link to is the one for Zenfone 8. Am I correct there is no Zenfone 9 config yet?
Is the gimbal stabilisation then used with Gcam?