Hello everyone.
I bought a Amazfit Verge a few days ago.
Cool watch, very good.
But I have a problem with it.
An update appeared here "3.2.7.5". I start the update process (download and restart the Watch), in the middle, an error appears (update screen) and the clock freezes.
Has anyone seen this or know what may be happening?
Related
Hi All,
Since last week i am seeing a java error message as soon as phone rings (It appears over the slider). I can not pick the call. I have to wait till it disappears from the screen, so that i can move the slider to receive the call (It disappears after 4-5 seconds). The error message reads:
Java.Lang.NoSuchMethodException: GetITelephony[]
I have googled for a solution, but no luck so far. If any one know what could be causing this error, and how i can fix it, will be of great help.
Additional info: I have rooted this phone as i bought it from China. It had bloating apps which i removed and installed google apps (which were not available in the phone).
Thanks.
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Any solution in 2019 using iphone?
Hello.
Did you solve this problem?
I found solutions but they were wrote more than a year ago...
And all of them used android phones to install new (now old) firmwares, but I only can use my iphone...
nategs said:
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Click to expand...
Click to collapse
I let it run down helped along by repeated vibration tests but eventually after about 3 weeks the thing ran out of juice. Charged it and started it back up and it booted up fine, it has been fine since! great little watch but really needs a hard reset button.
Good luck
I bought a Blip Lite today and tried the Notify app. There i updated the fonts and then problems happened. So, i tried to update firmware with no luck. I'm stuck on the Connect APP to update screen. The Watch synch with the app but not with the MI app. So what can i do? The amazfit notifty stays at 0 percent all time. Anyway i think i can get it replaced if we have no solution.
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
See if this thread helps.
Amazfit GTS (important not GTR) - after update boot loop
Hi i have Amazfit GTS i paired it with my Zepp app next i change some settings and app finded new update. After update the watch in "boot loop" mode. I unpair with my app and i would pair agin but the code QR is not show. I cant pair, on screen...
forum.xda-developers.com
Ali52415 said:
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
Click to expand...
Click to collapse
Hi same issue with me .. please inform if u solved this prblm
Were you able to solve it?
I am not sure how widespred was this, however on the 17th of october of 2022 my device was likely bricked over a firmware update made through the Zepp app.
Black screen, no matter how long I press the button. No response on the app. Its likely dead.
I have found mentions of this issue on very few places. On a few videos on youtube about fixing a black screen issue on this device i found some comments about people getting an update that made their devices unresponsible and nothing was making it go back. These comments were all made the same day I had this problem.
There is also a thread on the r/amazfit subreddit.
I'm luckly getting my device replaced trough the store, but it's definitely a bother.
Anyone else had this problem?
The same thing happened to me and on the same day(17), the watch did not connect to the application so I updated via playstore then downloaded suggested update, it was then that appeared the "update failure" i tried again and then appeared "update completed", but soon after the clock turned off and no longer turned on.
Same happened to my watch, It has been dead since last 7 days. Don't know how to recover from update.
The Service Center in Delhi says it will take one month for them to return watch after fix.