Hi.
My battery drains very quickly in my area (HSDPA). But if i force GSM then the battery lasts two or three days and i only need hsdpa 3 or 4 times by day, for example
20010-04-20 (V2.9)
1) The combo box that stores the model keeps the value when the program is restarted.
2) Fixed problems with owner names starting/ending with spaces.
3) other minor bugs
2009-11-27 (V2.8)
1) Compatibility with new Bluetooth Widcomm stack (HTC Touch Pro2, HTC Touch HD2, etc);
2) Compatibility to switch band with HTC Touch HD2
3) Compatibility to switch band with Toshiba TG01
4) switching is faster because now I dont turn radio off, just unregister and register from network. No need to enter automatically PIN code too.
2007-09-25 (V2.4.2)
Compatibility with Kaiser
Changes in 1.2.3:
Fix a bug in 1.2.1-1.2.1. Auto mode didnt work properly and switch delay action too.
Changes in V1.2.2 :
Some GSM operators intercepts http not found requests and redirects to help pages. It can cause unknown effects on bandswith who tries to look for the version number in the response stream.....
Changes in 1.2.1:
Buffer overrun bug in devices with very long radio manufacturer name (caused bandswitch fall).
Bandswith now detects if is running on WM5 or WM6 so now only switch twice if switching from GSM to UMTS band in WM6 devices. So now one only version for WM5 and WM6
Dual line support with two pin codes.
If the password(s) is/are incorrect the device will sound and vibrate and show Pin Page.
Pin enable user: remember to enter pin(s) again after reinstall.
danielherrero said:
Hi.
My battery drains very quickly in my area (HSDPA). But if i force GSM then the battery lasts two or three days and i only need hsdpa 3 or 4 times by day, for example when i surf the web or read the news. And with gsm i can use real mail but with hsdpa the battery is empty in 5 or 6 hours. I am looking a tool to switch between gsm and hsdpa in today screen. I know that i can do it in phone/options/band but it's very boring. Can someone help me?. If now i will write a little program (today plugin) and i will post it.
Thanks
Click to expand...
Click to collapse
as far as i know nothing like this exists
Cool Idea.
This is shouldnt be that difficult to achieve...
Use SetHSDPA.exe and link it to the Wireless Manager today plugin. Then everytime you tap the wireless plugin it then turns on/off the HSDPA functionality?
AFAIK band selection can be done changing a setting in registry, so this can be done with mortscript.
1. google SKSchema... it's a program which will allow you to do this (it's not free, but i think the price is awesome for what you can do with it), and download it.
2. Download these scripts that someone else made...
3. Drop the scripts in the \Windows\Start Menu\Programs\sScripts directory
4. Go to your phone's Settings, and choose Menu
5. Scroll down and select any of the new scripts (I am personally using the toggle script).
**alternatively, you can assign a button to it
***additionally, I use this program's Soft Reset feature to automatically soft reset my phone at 5 in the morning to make sure that when i get up in the morning the phone had a chance to reboot and has a fresh start...
hope this helps!
marsb007 said:
1. google SKSchema... it's a program which will allow you to do this (it's not free, but i think the price is awesome for what you can do with it), and download it.
2. Download these scripts that someone else made...
3. Drop the scripts in the \Windows\Start Menu\Programs\sScripts directory
4. Go to your phone's Settings, and choose Menu
5. Scroll down and select any of the new scripts (I am personally using the toggle script).
**alternatively, you can assign a button to it
***additionally, I use this program's Soft Reset feature to automatically soft reset my phone at 5 in the morning to make sure that when i get up in the morning the phone had a chance to reboot and has a fresh start...
hope this helps!
Click to expand...
Click to collapse
Does this solution allow you to switch between 'U' and 'G' on the fly? Meaning it does not need to close one connection to achieve the other and vice-versa.
as far as i can tell from the script it turns on flight mode, toggles between 3g/Edge, depending on which one you had originally when the script was run (by changing the registry settings), and then turning flight mode off...
your phone will search for signal as it normally would...
the whole process takes about 20-25 seconds.
Give skschema a try. They have a trial, so you can try before you get it if you decide to get it. There is also a Today plugin, although i've never used it, so i can't give any input as to how good it is.
in my experience with the phone, any time you change the band selection the phone goes into flight mode
The program is finished and working
Ok. The program is finished.
1) Put it in rom.
2) Create a shortcut and put it in \windows\startup directory.
3) Then you will see a circle icon at botton.
. White circle means Auto mode.
. Green circle means GPRS mode (2g).
. Red circle means UMTS/HSDPA mode(3g).
Tapping this icon a window is showed and you can click one of the next buttons:
auto: Sets auto mode.
GSM: Sets gsm mode.
UMTS: Sets 3g mode.
Close: closes the program.
Then the registry key \\SOFTWARE\\OEM\\UMTS\\OpMode is changed and the radio is reseted. And thats all.
Enjoy it...
dherrero said:
Ok. The program is finished.
1) Put it in rom.
2) Create a shortcut and put it in \windows\startup directory.
3) Then you will see a circle icon at botton.
. White circle means Auto mode.
. Green circle means GPRS mode (2g).
. Red circle means UMTS/HSDPA mode(3g).
Tapping this icon a window is showed and you can click one of the next buttons:
auto: Sets auto mode.
GSM: Sets gsm mode.
UMTS: Sets 3g mode.
Close: closes the program.
Then the registry key \\SOFTWARE\\OEM\\UMTS\\OpMode is changed and the radio is reseted. And thats all.
Enjoy it...
Click to expand...
Click to collapse
Is the program supposed to be attached somewhere?
jeje, sorry.
shogunmark said:
in my experience with the phone, any time you change the band selection the phone goes into flight mode
Click to expand...
Click to collapse
That is not necessarily true. If you go into the Band tab to change the selection, it does not need to go into flight mode. It simply disconnects and reconnects with the new selection.
new option
Hi. I ve added a new option.
To avoid forget to switch back to gprs after use hsdpa, when you tap on UMTS appears a dialog about "limit time" with options:
no: No limit
1, 5, 30, 60, 120: After x minutes the system switch back to gprs.
There was a problem cleaning the notification when the app exits......
New release....
Thnx loads. I'll give it a try.
Thanks
danielherrero,
Great job, it's working on my 8525. It's just what I needed thanks.
You' re wellcome....
Thank you. Going to put it on my 8525 as they roll out 3G here in the US I think this will come in very handy.
Take Care!
Weekend App
Well done!!! Thanks...This app works great.
This is my weekend app. As soon as the weekend starts I put the phone into GSM mode only. Battery life is far better. I don't need UTMS on the weekends....when i do....2 clicks and I'm in UTMS...2 more and I'm back to GSM.
I love this plugin! cant get easier to switch auto -> umts, and umts -> auto! thanks!!
Is there any way for an Xperia to show which LTE band it is currently connected to or even force select which LTE band to connect to?
Some phones from other manufacturers seem to have it under hidden menu but not the case for Sony
it should be in
*#*#INFO#*#*
OR
*#*#SERVICE#*#*
type this into your dialer
i forget which menu because i cant check becuase im not on a stock/stock based rom
I have very bad LTE reception at my house. 3g is great. So, usually I keep the Mobile Network to 3g as LTE drains battery for lack of signal. However, as soon as drive to the main road, LTE is full signal.
I purchased Tasker a long time back. Can I use Tasker to:
a. Switch to LTE as soon as I am some distance away from my house
b. Switch to 3g as soon as I am within some distance from my house
Any help/ pointers to do that with Tasker on a Nexus 5 will be appreciated. I am stock, rooted with xPosed and GravityBox setup.
You must be rooted.
Step 1: Download Secure Settings
Step 2: Open the app, go to Options and scroll down to Custom ROM Actions and ensure that "LTE" is checked
Step 3: Select new task > select task name (for example "LTE on")
Step 4: Select "+" button . Plugin > Seccure Settings > Click Configuration > Custom ROM Action > Select LTE.
Step 5: Select new task > select task name (for example "LTE off")
Step 6: Select "+" button . Net > mobile Data 2G/3G
Step 7: Create new profile by Clicking "+" sign and select location in Context.
Step 8: Set your location where you want to use 3G. Make sure to select desired Radius. Press Back button.
Step 9: Select task "3G"
Step 10: Long press on profile name > Select exit task > select LTE task name
You're done. I hope this will help.
vipulkarkar said:
You must be rooted.
Step 1: Download Secure Settings
Step 2: Open the app, go to Options and scroll down to Custom ROM Actions and ensure that "LTE" is checked
Step 3: Select new task > select task name (for example "LTE on")
Step 4: Select "+" button . Plugin > Seccure Settings > Click Configuration > Custom ROM Action > Select LTE.
Step 5: Select new task > select task name (for example "LTE off")
Step 6: Select "+" button . Net > mobile Data 2G/3G
Step 7: Create new profile by Clicking "+" sign and select location in Context.
Step 8: Set your location where you want to use 3G. Make sure to select desired Radius. Press Back button.
Step 9: Select task "3G"
Step 10: Long press on profile name > Select exit task > select LTE task name
You're done. I hope this will help.
Click to expand...
Click to collapse
Thanks. When I go to Net > mobile data 2g/ 3g I see a message that I need to be on a custom rom.
Some ROMs do not let change the Mobile Data by default.
There's another work around.
Step 6: Replace the action with any other actions like alert, notify etc.
Keep your 3G data on and only select LTE task in Exit task.
So your device will perform Task of Step 6 till you're in specific location and as soon as you leave that place it will switch to "LTE on" task.
Turns out I cannot enable step 2...enable LTE in secure settings plug-in. Any workarounds?
No Tasker workaround/Use apps from Play Store
monilchheda said:
Turns out I cannot enable step 2...enable LTE in secure settings plug-in. Any workarounds?
Click to expand...
Click to collapse
Sorry dude,
Till my knowledge is concern there's no other workaround with Tasker but there are few apps that lets you switch LTE/3G/2G.
Check "SwitchPro Widget" (by Leo) or "Power Toggles" (Painless Apps) in Google Play Store.
It lets you create widget on your home-screen so you can switch instantly between networks. :fingers-crossed:
vipulkarkar said:
Sorry dude,
Till my knowledge is concern there's no other workaround with Tasker but there are few apps that lets you switch LTE/3G/2G.
Check "SwitchPro Widget" (by Leo) or "Power Toggles" (Painless Apps) in Google Play Store.
It lets you create widget on your home-screen so you can switch instantly between networks. :fingers-crossed:
Click to expand...
Click to collapse
I have xposed + gravitybx. That allows me to toggle 4g. I wanted something to do it automatically.
How to change LTE band on Samsung S20/+/Ultra
Works on both chipsets.. I saw this tip on the board so I decided to make a clear instruction note on how to use it.
Download QuickShortCutMaker from the Play Store:
https://play.google.com/store/apps/d...shortcut&hl=en
Run the app:
Go to Call Settings
Then select the LAST:
Call Screening option should right after Call Screen Emergency and one up CAMERA
Click on TRY
Click on Top left menu ≡
Select Band Selection
Take a screenshot to make sure you can come back to factory settings in case you have issues.
Pick the band or bands you want, toggle the SELECTION button on the right up corner.
Go back.
You are all set.
I suggest rebooting the phone but this is totally optional.
REMEMBER: YOU ARE DOING THIS AT YOUR OWN RISK.
How to change LTE band on Samsung S20/+/Ultra
Works on both chipsets.. I saw this tip on the board so I decided to make a clear instruction note on how to use it.
Download QuickShortCutMaker from the Play Store:
https://play.google.com/store/apps/d...shortcut&hl=en
Run the app:
Go to Call Settings
Then select the LAST:
Call Screening option should be right after Call Screen Emergency and one up CAMERA
Click on TRY
Click on Top left menu ≡
Select Band Selection
Take a screenshot to make sure you can come back to factory settings in case you have issues.
Pick the band or bands you want, toggle the SELECTION button on the right up corner.
Go back.
You are all set.
I suggest rebooting the phone but this is totally optional.
REMEMBER: YOU ARE DOING THIS AT YOUR OWN RISK.
Down?
https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut&hl=en
Reporting that it works
Thanks
Thanks a lot for a tip
After the last Android update I did app lost its permissions and I can no longer access the settings menu. Would appreciate it if anyone has any work around as I live on the US Mexico border and I cross everyday any now my data intermittently works because it's constantly switching bands.