I'v got the global Note 9s Curtana and after getting the V11.0.9.0 i had an issue with the wifi, the device it self turns off the switch again and again. I have to tell you it's my first time with MIUI and i'm not a specialist of that, so after some trying to get a result i made my phone brick.
Now there is a red triangle on my screen with the "!" inside and in the bottom line says " The system has been destroyed".
I tryed to flash a ROM with MiFlash Tool but allways get an error.
I got a unlocked bootloader and i can reboot into fastboot.
Do anybody know a solution to help me?
johnsot said:
I'v got the global Note 9s Curtana and after getting the V11.0.9.0 i had an issue with the wifi, the device it self turns off the switch again and again. I have to tell you it's my first time with MIUI and i'm not a specialist of that, so after some trying to get a result i made my phone brick.
Now there is a red triangle on my screen with the "!" inside and in the bottom line says " The system has been destroyed".
I tryed to flash a ROM with MiFlash Tool but allways get an error.
I got a unlocked bootloader and i can reboot into fastboot.
Do anybody know a solution to help me?
Click to expand...
Click to collapse
What error did you get, perhaps drivers or windows 10 PC, try with a windows 7 if you have one
Sent from my U65GT using Tapatalk
try to rollback to 11.0.8 and in miflash dont use option to clean with bootloader , you can see my post here
https://forum.xda-developers.com/redmi-note-9-pro/how-to/tutorial-how-to-revert-to-official-t4109831
My problem has been solved, I finally made it and i flashed one fastboot rom and my phone is live again. I was really scared when i saw the message for the destroyed system.
Thanks you quoted on my post.
Related
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse
Hi guys,
yesterday my phone got updated automaticlly by xiaomi and after that it turns into the recovery screen and wont start.
I have tried to wipe all button and restart few times but it keeps back to that recovery screen.
I have tried as well to unlock the bootloader with xiaomi tool so i can flash new rom but the tool says that i need to allow that from the phone setting first
I cannot find any instructions online, can someone managed to resolved it or heared about it?
I am despered.
Thank you.
a43ixus said:
Hi guys,
yesterday my phone got updated automaticlly by xiaomi and after that it turns into the recovery screen and wont start.
I have tried to wipe all button and restart few times but it keeps back to that recovery screen.
I have tried as well to unlock the bootloader with xiaomi tool so i can flash new rom but the tool says that i need to allow that from the phone setting first
I cannot find any instructions online, can someone managed to resolved it or heared about it?
I am despered.
Thank you.
Click to expand...
Click to collapse
Same problem here!
You can't do anything, the only way is go to Mi Store and get it repaired there or go to your nearby phone repair service. You can't unlock the bootloader because your Mi Account isn't accociated to unlock the bootloader.
Dear All,
It is different Thread then others, pls read carefully for better understanding.
Story Started from May 10th, 2020, My RN3 SD (OS Miui 10) has gone in EDL mode suddenly, I tried to recover back but it didn't get the boot in any other mode and was unable to flash any ROM. in MI Flash I tried everything nothing happened. I just gave up on it and after battery fully discharges I put it in charge .. it was booted up automatically and everything was working fine. first I thought it was an OS related issue so I installed Custom from but this issue is happening every day...... 3 days ago same thing happen I tried to install firmware via MI Flash , it was detected but unable to flash .. receiving error Send NOP Command. i tried test point method and all tutorials which were mentioned in XDA or any other community but still having same issue....
hello everyone! this is my first post here and english isnt my main language so sry for my spelling/ lack of description
i bought a one plus 8t a while back and i rooted it all seems to work well until one day it stopped booting after installing a update with magisk manager and my phone stopped booting.
to be clear every time i rebooted it it said Qualcomm crash dump and was stuck on that screen.
it dose boot in fastball mode but when i go in recovery and wipe everything the same error appears.
i tried flashing from fastboot the magisk file i used to root but that didnt work but after doing that the Qualcomm crashscreen disappeared and now its just a black screen.
i have the EU variant of the phone and i think thats all.
(if you need any more info pls tell me im happy to provide it)
i am also a total noob so please dont feel like you are over explaining things
mattiaoki said:
hello everyone! this is my first post here and english isnt my main language so sry for my spelling/ lack of description
i bought a one plus 8t a while back and i rooted it all seems to work well until one day it stopped booting after installing a update with magisk manager and my phone stopped booting.
to be clear every time i rebooted it it said Qualcomm crash dump and was stuck on that screen.
it dose boot in fastball mode but when i go in recovery and wipe everything the same error appears.
i tried flashing from fastboot the magisk file i used to root but that didnt work but after doing that the Qualcomm crashscreen disappeared and now its just a black screen.
i have the EU variant of the phone and i think thats all.
(if you need any more info pls tell me im happy to provide it)
i am also a total noob so please dont feel like you are over explaining things
Click to expand...
Click to collapse
Look here https://forum.xda-developers.com/c/oneplus-8t.11579/
Each Android phone has the 4 run modes
ADB
FastBoot ( aka Bootloader )
Recovery
ADB Sideload
You exit the latter 3 modes running
Code:
adb devices
adb reboot
This does sounds surprising but apparently, my phone got bricked while I was restoring it to factory default settings.
Now the boot screen shows up for a minute and then the phone restarts back to the boot screen again and again.
Please help me, how can I unbrick my phone.
if all fail, try 2 point flash, need to open the case to acces the back of the phone. find youtube for more precise info. can be done yourself if u don't give up unless there is hardware trouble.
i give some link
akbar28 said:
This does sounds surprising but apparently, my phone got bricked while I was restoring it to factory default settings.
Now the boot screen shows up for a minute and then the phone restarts back to the boot screen again and again.
Please help me, how can I unbrick my phone.
Click to expand...
Click to collapse
Download the right fastboot ROM and flash it with mi flashtool
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com