https://eu.blackshark.com/pages/specs-blackshark3-pro
FDD LTE (B1/B2/B3/B4/B5/B7/B8/B19/B20/B28)
TDD LTE (B34/B38/B39/B40/B41)
TD -SCDMA (Frequency band B34/B39)
WCDMA (B1, B2, B4, B5, B6, B8,B9, B19)
GSM(B2, B3, B5, B8)
CDMA／EVDO(BC0)
5G NR NSA (N41, N78, N79)
In USA AT&T uses n260 n261 n5 5G bands (not covered by Blackshark 3 Pro)
and for 4G/LTE
AT&T uses 700 MHz Bands 12, 13, 29
850 MHz Band 5
1700/2100 MHz Band 4
1900 MHz Band 2
2600 MHz Band 30
https://www.t-mobile.com/support/coverage/t-mobile-network
tmobile US 5g bands are
Band n71 (600 MHz)
Band N260 (39 GHz)
Band N261 (28 GHz)
Band n41 (2.5 GHz)
T-mobile 4G LTE Bands: Band 2 (1900 MHz), Band 4 (1700/2100 MHz), Band 5 (850 MHz), Band 12 (700 MHz), Band 66 (Extension of band 4 on 1700/2100 MHz), Band 71 (600 MHz).
So certain 4g lte bands are missing (12/17 are major ones) and then all 5G bands are missing
understand these may not be used or broadcast depending upon area)
https://www.phonearena.com/news/5G-...wly acquired spectrum for its true 5G network.
Related
Anyone know what LTE band or bands the Nexus 9 operates on? I need to know where it can be used country wise as band choice varies wildly.
I want to know this too.
Is there anybody who know what lte band support on Nexus 9 LTE version?
I found it.
http://www.htc.com/us/tablets/nexus-9/
Network
2G/2.5G - GSM/GPRS/EDGE:
850/900/1800/1900 MHz
3G - WCDMA:
850/900/AWS/1900/2100 MHz with HSPA+ up to 42 Mbps
4G - LTE:
Bands 1,2,3,4,5,7,8,20
seems very good.
Hi all,
What is the European model for Honor 7 from vmall.eu ?
Can someone tell me if it has LTE B38(2600) band?
Thank you.
1Maus said:
Hi all,
What is the European model for Honor 7 from vmall.eu ?
Can someone tell me if it has LTE B38(2600) band?
Thank you.
Click to expand...
Click to collapse
I'm using it right now in Norway with Telenor. According to their website they are using the 2600mhz band.. Works good here!
Are you sure that you have tge european model? According to the IMEI read-out on my Huawei Honor 7 (PLK-L01):
Frequency bands : 2 SIM, GSM 1800, GSM 1900, GSM 900, GSM850 (GSM800), LTE FDD BAND 1, LTE FDD BAND 20, LTE FDD BAND 3, LTE FDD BAND 7, LTE FDD BAND 8, WCDMA FDD Band I, WCDMA FDD Band II, WCDMA FDD Band VIII
List of 4g supported bands for EU models are :
LTE FDD Band 1: 1920–1980 MHz (UL), 2110–2170 MHz (DL)
LTE FDD Band 3: 1710–1785 MHz (UL), 1805–1880 MHz (DL)
LTE FDD Band 7: 2500–2570 MHz (UL), 2620–2690 MHz (DL)
LTE FDD Band 8: 880–915 MHz (UL), 925–960 MHz (DL)
LTE FDD Band 20: 832–862 MHz (UL), 791–821 MHz (DL)
Hope it helps
Hi, last week I was given a Moto G3 XT 1541 from Spain. The problem is that it doesn't connect to argentinian carrier's 3g or 4g bands, it only works on 2g. A friend told me that I could work it out flashing the firmware of another model like XT1540 which works perfectly on 3g and 4g. Is it a firmware block? Can I solve it flashing another model's firmware? If I flash it, will my phone work or it will be a stone? Thank you ver much.
Yes, you can.
Moto G 3rd generation does not have capability of 2300 MHz bandwidth.
Requirements for a4G
1. A handset that supports 2300Mhz.
2. A 3G plan.
3. USIM (they provide free upgrade)
4. 4G network coverage
I think even HSPA or HSPA+ might not work for me on this phone. I am using a T Mobile family plan here, and comparing th bands given on the website:
"4G (HSPA+)
With 4G, theoretical maximum download speeds range from 21 Mbps up to 42 Mbps. You can take advantage of incredibly fast download speeds, and even use voice and data services at the same time.
Frequencies: Band 2 (1900 MHz), Band 4 (1700/2100 MHz)
3G (HSPA)
With 3G, theoretical maximum download of 14 Mbps. With 3G, you can use voice and data services simultaneously.
Frequencies: Band 4 (1700/2100 MHz)"
"Moto G (XT1550)
LTE (1, 3, 7, 8, 28,40) UMTS/HSPA+ (900, 2100, 850 MHz)
GSM/GPRS/EDGE (850, 900, 1800, 1900 MHz)"
It seems that the uplink is unsupported by my phone and so the phone is unable to use the HSPA/HSPA+ bands. I think the only way to use it is to unlock the 1700 MHz band on my phone.
XT1541: GSM/GPRS/EDGE: 850, 900, 1800, 1900 - UMTS/HSPA+: 900, 2100 - LTE: B1 (2100), B3 (1800), B7 (2600), B8 (900), B20 (800)
Argentina UMS/HSPA+ works on 850 and 1900.
This phone will only get 2g where you are. Flashing another firmware will not fix this.
I have t-mobile. I still don't understand what bands need to be covered for t-mobile. I'm thinking about buying a Xiaomi Redmi 4 prime. I live in the USA, I want to know what bands should be available for me to use the phone. I already checked http://willmyphonework.net/ and the Redmi 4 Prime is not listed. The bands on the phone pulled from gsmarena are:
Technology
GSM / CDMA / HSPA / EVDO / LTE
2G bands GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
CDMA 800 / 1900
3G bands HSDPA 850 / 900 / 1900 / 2100
CDMA2000 1xEV-DO & TD-SCDMA
4G bands LTE band 1(2100), 3(1800), 7(2600), 38(2600), 39(1900), 40(2300), 41(2500)
Speed HSPA, LTE
GPRS Yes
EDGE Yes
kgonepostl said:
I have t-mobile. I still don't understand what bands need to be covered for t-mobile. I'm thinking about buying a Xiaomi Redmi 4 prime. I live in the USA, I want to know what bands should be available for me to use the phone. I already checked http://willmyphonework.net/ and the Redmi 4 Prime is not listed. The bands on the phone pulled from gsmarena are:
Technology
GSM / CDMA / HSPA / EVDO / LTE
2G bands GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
CDMA 800 / 1900
3G bands HSDPA 850 / 900 / 1900 / 2100
CDMA2000 1xEV-DO & TD-SCDMA
4G bands LTE band 1(2100), 3(1800), 7(2600), 38(2600), 39(1900), 40(2300), 41(2500)
Speed HSPA, LTE
GPRS Yes
EDGE Yes
Click to expand...
Click to collapse
According to this page:
https://support.t-mobile.com/thread/126498?start=0&tstart=0
I could see that Xiaomi Redmi Note 3 has the same 4G bands as the Xiaomi Redmi Note 4, and the first answer which marked as the Correct Answer says that it won't get any 4G support With T-Mobile
I have a new unlocked S9+ China (SM-G9650/DS, Qualcomm Snapdragon 845), and I'm trying to figure out if it is fully supported by T-Mobile in the US. I've done some Googling on this, but I'm not sure I understand the results. The supported band specs for the phone, and the T-Mobile frequencies used, are below. Can someone confirm or comment whether the phone is fully supported, or if not what's missing? Thx, Gus
S9+ China SM-G9650/DS Specs:
GSM Mhz band: Quad-Band 850/900/1800/1900
2G network: CDMA 800, GSM 850/900/1800/1900
3G network: CDMA2000 1xEV-DO
TD-SCDMA 1900/2000
UMTS 850/900/1700/1900/2100
4G network: LTE Cat18 700/800/850/900/1700/1800/1900/2100/2300/2600
(Bands 1,2,3,4,5,7,8,12,18,19,20,28,29,30)
TD-LTE 1900/2300/2500/2600 (Bands 38,39,40,41)
Data network: GPRS, EDGE, CDMA2000 EV-DO Rev 0, CDMA2000 EV-DO Rev A, TD-SCDMA, UMTS, TD-HSDPA, HSDPA, HSUPA, HSPA+, TD-LTE, LTE, LTE-A
T-Mobile Frequencies:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2
gus_zernial said:
I have a new unlocked S9+ China (SM-G9650/DS, Qualcomm Snapdragon 845), and I'm trying to figure out if it is fully supported by T-Mobile in the US. I've done some Googling on this, but I'm not sure I understand the results. The supported band specs for the phone, and the T-Mobile frequencies used, are below. Can someone confirm or comment whether the phone is fully supported, or if not what's missing? Thx, Gus
S9+ China SM-G9650/DS Specs:
GSM Mhz band: Quad-Band 850/900/1800/1900
2G network: CDMA 800, GSM 850/900/1800/1900
3G network: CDMA2000 1xEV-DO
TD-SCDMA 1900/2000
UMTS 850/900/1700/1900/2100
4G network: LTE Cat18 700/800/850/900/1700/1800/1900/2100/2300/2600
(Bands 1,2,3,4,5,7,8,12,18,19,20,28,29,30)
TD-LTE 1900/2300/2500/2600 (Bands 38,39,40,41)
Data network: GPRS, EDGE, CDMA2000 EV-DO Rev 0, CDMA2000 EV-DO Rev A, TD-SCDMA, UMTS, TD-HSDPA, HSDPA, HSUPA, HSPA+, TD-LTE, LTE, LTE-A
T-Mobile Frequencies:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2[/QUOTE
It will work on T-Mobile frequencies but you won't get Wifi Calling or voLTE. The stock CSC is TGY - Hong Kong, T-Mobile is TMB. I haven't found any way to change the CSC even with custom ROM, but assuming one became available you would trip Knox and lose Samsung Pay, Samsung Health, Secure Folder, OTA Updates and Factory Warranty. Some members have posted in regards to changing the CSC Code in the link below but I'm not certain it's working out. Good luck!
https://forum.xda-developers.com/galaxy-s9-plus/how-to/qualcomm-sm-g9650-hong-kong-china-t3764542
Click to expand...
Click to collapse
baring any unforeseen hidden stuff, you should be good to go for Tmobile...Minus the new Band 71 on the 600mhz spectrum. Honestly, unless you live in the area that will get this deployment, this shouldn't be of concern. As long as you can use Band 2/4/12, you will be ok with Tmobile.
I almost went with this route as well since I wanted to get a Snapdragon version with larger storage size. But I chickened out because I've been reading people having bad signals/not having full LTE speeds with their imported S9+ on TMOUS.
Good luck and let us know!
I used CT Excel Americas (T-mobile mvno) and it worked on CHC firmware. But I forgot to test volte etc.
kevinfan1990 said:
I used CT Excel Americas (T-mobile mvno) and it worked on CHC firmware. But I forgot to test volte etc.
Click to expand...
Click to collapse
Please post steps for this. I would like to get VoLTE and Wifi calling