Related
We've updated a bit....
Download Link: [Here]
We now have a complimentary app on the app store for this A4D App.
What is A4D?
The goal of A4D is for us to move beyond just N1 make it an all in one flashing/upgrading/android utility. We just added a ROM library with MD5s. We are not going to be hosting the actual ROMs by themselves so if you report a dead link, they will be taken down (after a number of reports). You can also add your own ROMs as well into the library.
The ROM library will be supported by both Android and Desktop App. We are rewriting the Desktop apps so that we can do all 3 platforms in one, Linux, Windows, and Mac. You'll love the layout of the app. That's all we can say for now.
Oh one more thing. The android app won the best android app award at the Mobile in the Middle Hack-a-thon over the weekend in Chicago (on 3/6/2010).
I would like you guys to try out the app and tell us feedbacks. Also feel free to add your own ROMs to the Database and tell us how we can make the DB better. There a number of features we are trying to add as well. But with our full time jobs... things are going a little slower than we wanted. Sorry.
Requirements to run the app on Android: Amon_RA's recovery. That's what we tested it with.
Reserved
Reserved for Future Updates / Changelog
Can't wait to see if this is fool proof.
Add md5 check. Make it in this way: user have to enter/copy-past md5 hashsum from forum/site. Program calculates md5 of image and says image is good or bad. Also you can disable flashing with out this check. ;-)
good idea. Will do that. That will help with flashing screwed up downloads.
Hi
Thank you for sharing the application.
Does it flash the radio too? I mean CyanogenMod has two files a radio ROM and a CyanogenMod ROM. Does it flash both of them to the phone?
Thanks.
Radio flash is in there we took it out. May do so in the next release but radio flashing is dangerous (can brick phones) so...
Hey Lwin,
Nice concept man, this is gonna prove very handy for many peeps.
You've come up trumps again
So, this is a desktop application?
Does it flash ROM's from your desktop or copy them over and just run the commands on the phone for you?
I ask, as I'm having some problems flashing now, based round a slightly faulty Micro SD card. Does it store backups on the phone or on your desktop PC?
This program is written so you don't have to do command line commands. Everything else remains the same. If you are doing a Nand backup, it goes where it used to go.
I would recommend fixing your "slightly faulty Micro SD card" by getting a new card.
nice app for those that aren't familiar with cmd or jus pure...lazy lol
maybe the screens should be bigger as quite hard to see clearly whats available.
Pure Genius...
seraph1024 said:
Here is the GUI tool for unlocking, updating, restoring, flashing of the N1 (and in theory should work on all HTC androids).
Try it out and see if it is useful. The tool is made to help for people with very basic skills since the tool at this stage is a wrapper for the shell commands at this point.
Again, as usual, we take no responsibility for loss of sleep, loss of phone or screw ups on our side (due to app) or on your side (due to lack of ability to follow instructions).
I wish to make it more simple. We welcome feed backs.
Seraph1024 - ShadowPyro
Download Link: [Here]
Click to expand...
Click to collapse
Hey Seraph, This is getting better and better everyday.. How is your windows and android port.. Oh and don't forget there little buddy, I need you on my Mobility Team when we arrive to the scene.. Android and Audi... Almost there....
Edit: Okay, can't run on Mac, of course will in VMware, can you please make this mac native too... It would be great as per what MooMoo said, for all who are lazy...
shadowpyro said:
This program is written so you don't have to do command line commands. Everything else remains the same.
Click to expand...
Click to collapse
But I don't use command line now. I didn't realise anyone did. Do you not just boot into RA Recovery and flash from there?
shadowpyro said:
I would recommend fixing your "slightly faulty Micro SD card" by getting a new card.
Click to expand...
Click to collapse
Thanks, I didn't ask for advice.
GodDriven said:
Hey Seraph, This is getting better and better everyday.. How is your windows and android port.. Oh and don't forget there little buddy, I need you on my Mobility Team when we arrive to the scene.. Android and Audi... Almost there....
Edit: Okay, can't run on Mac, of course will in VMware, can you please make this mac native too... It would be great as per what MooMoo said, for all who are lazy...
Click to expand...
Click to collapse
There will be a mac port sometime this week. I can most likely port to linux too but if you know linux and if you have to use wrapper, you have an issue
install issues
I tried to install it but got a system update required....
extracted the sdk to the folder C:\android-sdk-windows
extracted android4dummies and clicked setup
I get a pop up with the following:
unable to install or run the application. the application requires that system assembly system.data, entry version 3.5.0.0 be installed in the global system cache.....???
What do I do now?
Sounds like the app uses .NET framework 3.5.
So goto microsoft website an get 3.5 .Net Framework.
pwvandeursen said:
I tried to install it but got a system update required....
extracted the sdk to the folder C:\android-sdk-windows
extracted android4dummies and clicked setup
I get a pop up with the following:
unable to install or run the application. the application requires that system assembly system.data, entry version 3.5.0.0 be installed in the global system cache.....???
What do I do now?
Click to expand...
Click to collapse
You do need .Net 3.5. It should have asked you, if not installed that as a prerequisite.
I went to MS and downloaded the .net 3.5 installed it (apparently it was already on my pc, so instead of installing I tried to repair it. no success....
pwvandeursen said:
I went to MS and downloaded the .net 3.5 installed it (apparently it was already on my pc, so instead of installing I tried to repair it. no success....
Click to expand...
Click to collapse
Can you send us a screenshot.
Do not unzip into C:\android-sdk-windows. App will install SDK or search for the SDK there.
Unzip on your desktop or temp and install from there.
just to be clear, I unzipped adroid sdk and placed in the mentioned location. the android4dummies is extracted on the desktop and executed from there..
so should I remove the SDK and retry?
A friend of mine picked up a Proscan PLT7044k. Great cheap tablet from BigLots they wanted to gift me as a late birthday present. Sure it's cheap, but cheap can be good right? Especially if it's a backup device or something to tinker with.
Trouble is we're running into some issues. Fine. Great it's a cheap Chinese tablet. We both get that we're not expecting nexus or ipad mini or even kindle fire quality. However GetJar is, apparently, not working correctly, Amazon Marketplace (which it was linked to in the device) will not let you change settings, and My friend isn't wanting to try rooting to get google play working just yet because we're not sure if the Thread found on the matter has all the bugs worked out.
This Thread seems to be closest to what 'we' want but the model number is different (it's supposed t obe the same device save for the one we're working with included a hardware keyboard/case, but one never knows.)
Of Note when queried my friend only saw a one gig internal storage device instead of the four gig advertised and described the external media slot as a SD slot instead of a micro-sd.
So, since I am, for the moment, treating this device as different and not wanting to risk bricking before info can be gained on if it's worht keeping or taken back, trying to figure out the following:
Very minimum how does one get google play on this gizmo.
Is there anything that can be done about the touch screen lag?
Is there a CyanogenMod port that will work or other custom rom that might help with the issues of lag?
Any advice would be welcome/useful. Even 'RTFM' with links to other threads.
Edit: Be Aware my 'primary' computer is running linux (peppermint OS3, ubuntu 12.04 based distro.)
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
I ended up taking mine back and getting a Nook Touch. Sure I'll still need to root the thing to get much use out of it beyond being an e-reader but even with it not-rooted it's still actually a pretty good experiance.
Sorry Icouldn't be a trailblazer to anyone getting a proscan and wanting to improve on it.
a noob, but I honestly have tried...
Tearran said:
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
Click to expand...
Click to collapse
ok, I have tried very VERY hard to find out how to root my proscan plt7044k. I've tried following the few links that I have found, and have found them to be broken. Or the items just won't download onto my computer or just flat don't work. It appears that what I have to do is to find a driver for this thing so that my computer can recognize it, and the Curtis website doesn't give any driver information. Yes, I did download their manuals and tech material, and they DON'T WORK. All they provide is a powerpoint thing that says to "find program x, do y, etc", without providing that program. I cannot find a driver for this p.o.s. ANYWHERE, nor any that would work for an earlier model and then also "might" work for mine.
I really want to get rid of the "getjar" crap, as well as all of the bloatware that google puts into these things!
Tearran said:
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
Click to expand...
Click to collapse
I have checked device for root it is not rooted out of the box. If you have a tutorial to actually get root it would be appreciated.
Sent from my SGH-T889 using xda premium
musicafe said:
I have checked device for root it is not rooted out of the box. If you have a tutorial to actually get root it would be appreciated.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Tearran said:
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Click to expand...
Click to collapse
I've looked everywhere including the links you provided, and adb don't find this device, oh well, bout to give up on this
side load
Goggles2114 said:
A friend of mine picked up a Proscan PLT7044k. Great cheap tablet from BigLots they wanted to gift me as a late birthday present. Sure it's cheap, but cheap can be good right? Especially if it's a backup device or something to tinker with.
Trouble is we're running into some issues. Fine. Great it's a cheap Chinese tablet. We both get that we're not expecting nexus or ipad mini or even kindle fire quality. However GetJar is, apparently, not working correctly, Amazon Marketplace (which it was linked to in the device) will not let you change settings, and My friend isn't wanting to try rooting to get google play working just yet because we're not sure if the Thread found on the matter has all the bugs worked out.
This Thread seems to be closest to what 'we' want but the model number is different (it's supposed t obe the same device save for the one we're working with included a hardware keyboard/case, but one never knows.)
Of Note when queried my friend only saw a one gig internal storage device instead of the four gig advertised and described the external media slot as a SD slot instead of a micro-sd.
So, since I am, for the moment, treating this device as different and not wanting to risk bricking before info can be gained on if it's worht keeping or taken back, trying to figure out the following:
Very minimum how does one get google play on this gizmo.
Is there anything that can be done about the touch screen lag?
Is there a CyanogenMod port that will work or other custom rom that might help with the issues of lag?
Any advice would be welcome/useful. Even 'RTFM' with links to other threads.
Edit: Be Aware my 'primary' computer is running linux (peppermint OS3, ubuntu 12.04 based distro.)
Click to expand...
Click to collapse
You can side load the Play Store, also, what version of Android is the tablet running?
IRIE4IPIER said:
I've looked everywhere including the links you provided, and adb don't find this device, oh well, bout to give up on this
Click to expand...
Click to collapse
You probably have a driver problem. I use ADB Konnect (wireless ADB) To push over wifi.
Is there any possible way to flash a custom ROM to it the factory ROM has too much crap on it memory wise?
JayMax03 said:
Is there any possible way to flash a custom ROM to it the factory ROM has too much crap on it memory wise?
Click to expand...
Click to collapse
I Titanium backup to uninstall the bloat. You also can use Root explorer or adb to rename the apk extension of the bloat to get rid of the eyesore
Sent from my Nexus 7 using Tapatalk
proscan 7" tablet.
you kngoo root, make sure your using windows...anything past vista.
i used wkindows 7 or 8 from an internet cafe and my proscan is plt7602g and it worked fine...i even reset from the android service menu (green dead dude) and it worked but make sure most of all that you have the verify apps off so you can root it. because it will still be a danger to ur tablet. there is always a bricking chance, one you instakll kingoo root and run the program plug in ur tablet press root and the app takes care of it all. and if you google kingoo app or kingoo root it will show a main website and go from there
i got my proscan PLT1077G and i haven't found a **** yet i want to change my tablet android OS but don't have a developer who can help us with this one i think proscan is not that popular
Tearran said:
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Click to expand...
Click to collapse
Going to try this on the PLT7650G
Need firmware file for plt7223g
prepaidguy9081 said:
Going to try this on the PLT7650G
Click to expand...
Click to collapse
so much for this method - I used kingo root for windows, slow but works. just go grab a beer and come back in ten.
I was just wondering if there was any available (or TWRP) or a substitute for a generic tablet
Maybe it's too early but I'm interested too, even for a cyanogenmod rom
pelata said:
Maybe it's too early but I'm interested too, even for a cyanogenmod rom
Click to expand...
Click to collapse
You must have a similar tablet I have lol but yeah I was thinking the same thing, in time I suppose but one can hope right? Lol
sketch2k278 said:
You must have a similar tablet I have lol but yeah I was thinking the same thing, in time I suppose but one can hope right? Lol
Click to expand...
Click to collapse
I think so
I ask for a CM rom because I have slow wifi signal but I can't understand if it's an hardware trouble or a software trouble...
pelata said:
I think so
I ask for a CM rom because I have slow wifi signal but I can't understand if it's an hardware trouble or a software trouble...
Click to expand...
Click to collapse
My issue are 2 things the constant ads that pop up (minor issue) and second is the space, very low space.... I have an 32gb sd card and I'd like to use that as the primary storage, but since the tablet is kit Kat switching the storage around isn't done the same as its done in jelly bean and from what I read it can only be done by flashing in CMW recovery because ads to sd doesn't always work
I have exactly the same your problems! I can't understand why they partition the main memory when they could use the whole space to install apps... And I want to remove that damn ads popups too!
My model is recognized as softwinner "V11", I'd like to know if CM designed for other similiar tablets works...
pelata said:
I have exactly the same your problems! I can't understand why they partition the main memory when they could use the whole space to install apps... And I want to remove that damn ads popups too!
My model is recognized as softwinner "V11", I'd like to know if CM designed for other similiar tablets works...
Click to expand...
Click to collapse
Yup im certain that we have the same tablet because mines is also softwinner V11 lol
Hi guys. I've got an a33 quad core tablet badged ciprotec but I know it's allwinner based (obviously). Have you guys managed to get yours rooted? Mine runs 4.4.2 kvt49l. It's OK for messing around on but I need to practice my developing skills!! Cheers!
That tab is should already rooted I have one too but I found the preinstalled root doesn't work properly. Cant remember quite how i got it working but i think i used supersu to delete and reinstall the root script or I might have had to hook it up to the pc with a bit of software for flashing allwinners that I found. When you do have it rooted get gl2sd if your running kitkat so you can use the external sd for some of the bigger app installs rather than the rather small internal sd, but before that make sure the write permissions are enabled to sd there are a few Apps on the market that can do this. Has anybody heard anything on cwm or twrp yet?
Managed to get it done using vroot! Yay!! It's mine at last!
Hi all,
I've rooted my device and accidentally removed the systemui.apk so now my status bar etc is missing.
So far I've been trying to restore it from several Roms and other user posts, however, it looks like as if the model etc has to match my environment. So here I go, could someone post their systemui.apk???
Cheers!
Bump
Anyone??
allwinner a33
what is your tablet model, have the V140D
Mulletmeister said:
Managed to get it done using vroot! Yay!! It's mine at last!
Click to expand...
Click to collapse
where can I get vroot? all the links on google seem to be malware
godblezz said:
where can I get vroot? all the links on google seem to be malware
Click to expand...
Click to collapse
Its a root app.. It'll come up as malware.... Use kingoroot.. Works fine.
I have this tablet as well, I have it rooted but still have not found a way to get around the ads that popup. Has anyone been able to mod this or delete the script that is causing the ads.
"edit"
found a link for AllWinner Demo Lock (trojan) Removal Tool cannot post the link because I have not posted 10 posts, but if you google it is easy enough to find.
"edit"
did not fix problem with ads
I DroidWall use to choose which Internet applications fall
Windows ADB driver??
I have a new A33 tablet, which I cannot get it rooted, because I cannot find a working Windows ADB driver for it - either for Windows 8.1 x64 or Windows 7 x64.
The MTP driver works (I can transfer files), but I cannot find the "Android" driver for the ADB connection.
I tried the Rockchip "RK driver assistant" - no luck.
If you have a working ADB connection to an Allwinner A33 tablet, could you perhaps share the Windows ADB drivers here?
TIA
RashaMatt said:
If you have a working ADB connection to an Allwinner A33 tablet, could you perhaps share the Windows ADB drivers here?
TIA
Click to expand...
Click to collapse
Try this
A33 Twrp
I made a TWRP for A33, A23,A20 and A31s models over on TechKnow . Some of them are posted but I think I have yet
to post all of them on the Public Downloads... I will make an effort to get them all posted soon. Offhand I do not
recall the specs I used though I am thinking all used gslx Touchscreens.. I will post here again the specs of the Tabs
they are for and a link to where they are posted once I am sure they are up ... The delay in posting them has
been the installer, I was working with another person since I have no A33 on making an installer that will
work on all of the tab models from ADB, also I am working pretty heavily on A31s Dev at present and have
allowed my other projects to fall behind even though some are essentially finished as in this case.
Thanks
Hi folks.
I'm an Android firmware developer (you can see my posts here in xda) that got a yoga book yesterday. For me it works at it should (by now) but my hacker soul speak to me and said: "at least take a look to see what you can get from this device". I don't have many time, so I can't spend time doing roms or fixing things by myself, but I can share with you some info I get and help you with my knowledge if someone is interested in "play" with this device.
First of all, I'm not responsable of anything that you can break following these steps. Almost all of them are tested and with some common sense you will not break anything, and if you break anything I will try to help you to fix it (if you are polite), but this is a work in progress and hacking and the possibility of brick the device is always there.
I only have the Android version without LTE, so I only tested in my Book.
So, here we go:
1) Secret codes:
I get this codes decompiling EngineeringCode.apk with apktool. Be carefull with them:
####0000# - Display version info
####7599# - Display hardware info
####8375# - Display baseband info
####1111# - Factory test
####2222# - Display SN
####7777# - Factory Reset???
####5993# - Display internal frameWork version
####7642# - Cut the power off to reload the PMIC - This command shutdowns the device. Just press the power button to reboot.
####5236# - Display LCD name
####2834# - ES close test
####8899# - open the ums mode default for debug
####3333# - offline log
####3334# - offline modem log
####9527# - Mediaplayer setting
####78646# - RunIn test
####6020# - switch country code
####59930# - Display current country code
####8746# - Enter engineering mode
####4227# - Enter engineer test
####357# - DLP_TEST
To use these codes, open the contacts app, press the search button and enter the code in the search bar.
2) OTA Images
You can get OTA images directly from lenovo servers. Just open your browser and paste this url:
http://fus.lenovomm.com/firmware/3....WW06_BP_ROW&action=querynewfirmware&locale=en
Change device model if needed (LenovoYB1-X90F or LenovoYB1-X90L)
Change curfirmwarever to a valid OLD firmware, this way you will get the next one in age.
Change locale if needed.
With this url you will get a download url at the end of the result page. In this case: http://tabdl.ota.lenovomm.com/dls/v...S000426_1705080316_WW06_BP_ROW_WC80C2A0F2.zip
These images are not full ota images, they are diff versions. This means that we can't use them to mod the image, or recover a bricked device, but this is a first step
3) Custom images
We don't have real sources to build a custom image (the lenovo's open source files are useless), but this doesn't mean that we couldn't modify stock images to take out useless apks or get better performance.
We can get this using an Android Kitchen and a full update image for the device.
As Android kitchen you can use SuperR kitchen (https://forum.xda-developers.com/ap...chen-superr-s-kitchen-v1-1-50-v2-1-6-t3597434)
As full image, I only tested the one here (https://easy-firmware.com/index.php?a=browse&b=category&id=19521) because I can't download any newer one.
I tested uncompressing it, deodexing the apks and doing a new image. But I don't test it in the device because I need to install twrp to flash the new image and I don't have time to test. But this should work, I did it many times so if someone is interested I can give steps to do it and support for testing.
If someone can get the latest full images, send then to me and maybe I can get some time to do some tests.
PD: Probably we could use this as a base to get LineageOS 14.1 working: https://github.com/latte-dev/android_device_xiaomi_latte/tree/cm-14.1
So, if you are interested in some hacking with the Yoga Book, contact me and we could team to get the most of this device.
First of all thank you for your post, it´s really useful
if you could somehow manage to boot windows on this machine it´s by far the greatest war we have right now.
Il promise you a lunch or dinner on Lisbon whenevere you want!
joao1979 said:
First of all thank you for your post, it´s really useful
if you could somehow manage to boot windows on this machine it´s by far the greatest war we have right now.
Il promise you a lunch or dinner on Lisbon whenevere you want!
Click to expand...
Click to collapse
Sorry, my knowledge of Windows is only user level . Install it in personal computer to play games .
But I really don't know why people wants to run Windows there, it will go slowly than Android and its less touch oriented... but I suppose that this is a chat for another thread
corvus said:
Sorry, my knowledge of Windows is only user level . Install it in personal computer to play games .
But I really don't know why people wants to run Windows there, it will go slowly than Android and its less touch oriented... but I suppose that this is a chat for another thread
Click to expand...
Click to collapse
in my particular case, i´l admit that is for football manager the touch version
joao1979 said:
in my particular case, i´l admit that is for football manager the touch version
Click to expand...
Click to collapse
Have you tried running it through Crossover? It may be in its infancy but i have got a few apps running OK with it.
I have the full "YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW" I can upload somewhere if anyone can suggest a good site to do so without signing up? The file is about 2.5gb
It will be great if we could get the latest version, because maybe these older versions have older files that we have updated in our tablets.
Mixing files could give unknown problems
The current TWRP is based on the new Yoga Tab 3
I am starting to think they do not do full roms for this in the same way they do for a lot of their other devices.
We know the otas are available from tabdl.ota.lenovomm.com/dls/v6/ and are named according to the 2 builds that it bridges. As easy-firmware had the december full rom under the file name B1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip I had hoped that I could work out the file path to pull it down.
There were some interesting ideas here, https://forum.xda-developers.com/android/help/how-download-stock-roms-lenovos-ota-t3109507 but it seems there is a difference between phonedl.ota and tabdl.ota
Queries to full roms that work for phones, don't seem to work for the yoga book.
Anyone with more web knowledge able to pick this up? I am not sure the files are there but I feel they should be.
Good luck
Update: the downloads seem to be hosted via CloudFront. An Amazon service, but I can not find out a way of listing the available files. The latest full rom would be
http://tabdl.ota.lenovomm.com/dls/v6/YB1-X90F_USR_S000426_1705080316_WW06_BP_ROW_WC80C2A0F2.zip
But the Last 8 chars are random and we do not know what they are.
So we have two hopes. First work out the right query to the link from fus.lenovomm.com or two find a way of listing files available in tabdl.ota.lenovomm.com/dls/v6
Not sure I have got much further but ill keep trying when I can.
Hey, I should mention that I have some files that you may find helpful; I got them from the easy firmware website. They're all the .img files for each partition in Android (ie. boot.img, cache.img, config.img, factory.img, recovery.img, system.img) as well as: biosupdate.fv, bootloader, firmware.bin and gpt.bin. However, these of course aren't in the normal "flashable .zip ROM" format. So unless you know how to take apart these .img files they aren't very useful. If you need any more help or have any other questions about how far we've come on our own, feel free to ask. danjac also has great knowledge of our efforts.
Yes, I know how to use them, unpack, modify, etc. But what I want is the latest version, no a old version (I hav these files too). If you have them I can do some changes, debloat, etc.
Anyway, I see little interest in custom roms in this forum ( probably because it's not a device with a lot of users or the users are not the techy kind), so I prefer to help others with info than do a custom rom that only 2 or 3 people will use. Doing custom roms is a time hungry task and probably it doesnt worth the effort. Anyway this device is not full of bloatware like samsung ones, so it useable as it is.
As I said in my first post if anyone is interested I can give some hints and support to modify the full image (but only the latest one).
It's so sad that there are only a few interested owners of this tab - it's such a nice device but i fear the day lenovo decides to end their support for it. There will be no custom roms to switch to and keep the device alive - it will be a soon to be bit of old tech garbage BTW. I still use my Asus Transformer Prime because of the nice community
@NiffStipples I fully agree. This device is so powerful and its a suprise that it is invisible to the "market". In my humple opinion the normal ROMs aren't that bad besides missing updates but I would love to see all the power served through a custom rom. unfortunately programming is not my business
Stefan
Broomfundel said:
Have you tried running it through Crossover? It may be in its infancy but i have got a few apps running OK with it.
Click to expand...
Click to collapse
Interesting - is Crossover good (and does it require factory reset)?
Hi, It works well with some things and not others. Often the why and where are not obvious. It is basically "wine" the layer that allows some windows apps to run on a linux install. Tweeked to work with android. Just an install to put crossover on. Then another install (Within crossover), to put you app on crossover. If it doesn't work out of the box, there windows libraries you can switch out and dependencies you can install. (Eg: directx , .net) Even if your not technical. I would say get on the beta program and give it a try.
Hi! what do you mean by "lenovo's open source files are useless"? do you refer to this packet on lenovo's suppport site? download.lenovo.com/consumer/open_source_code/lenovo_yb1_x90f_l_osc_201608.zip
I've entered the Android YogaBook's BIOS and noticed that VT-X is enabled by default! With Limbo x86 we could get a fully working virtualized Windows or Linux, if it wasn't for... KVM. It seems like it's not enabled in Lenovo's default kernel. Could we get to recompile the kernel with this option on? i'm not a big android/ROM expert but i surfed the open_source_code folder from Lenovo and it seemed, to me, that we could rebuild the Kernel at least.
This could really change things!
morrolinux said:
Hi! what do you mean by "lenovo's open source files are useless"? do you refer to this packet on lenovo's suppport site? download.lenovo.com/consumer/open_source_code/lenovo_yb1_x90f_l_osc_201608.zip
I've entered the Android YogaBook's BIOS and noticed that VT-X is enabled by default! With Limbo x86 we could get a fully working virtualized Windows or Linux, if it wasn't for... KVM. It seems like it's not enabled in Lenovo's default kernel. Could we get to recompile the kernel with this option on? i'm not a big android/ROM expert but i surfed the open_source_code folder from Lenovo and it seemed, to me, that we could rebuild the Kernel at least.
This could really change things!
Click to expand...
Click to collapse
How did you enter the bios? Can you boot from usb?
anyone managed to use swiftkey keyboard?
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
- Backlight Control (added 25/5/2018)
I'm getting very near to have the touch and the keyboard working though
P.s. In attach you find the outputs from 3DMark - IceStorm Extreme (default settings), would be much appreciated if someone with the real Win version shared its score
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Broomfundel said:
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Click to expand...
Click to collapse
I have added the link to the guide! If yo have any issues let me know but keep in mind that currently no input devices (touchscreen or keyboard) work!
Thanks for posting this. I am really so impressed. Will be trashing my X90F tomorrow. Just got to dig out a powered USB hub. Ill report back, and lets see what happens.
(Hopefully not a brick)
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Broomfundel said:
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Click to expand...
Click to collapse
Hello Broomfundel,
I never got that error, but it seems to be a problem of the ASL Compiler build not of your file.
I am using Mac so I have another build, if you want to post the file I can compile it for you .
Otherwise you can try an older release or to build the tool from source maybe?
Poz1 said:
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
I'm getting very near to have the touch and the keyboard working though
Click to expand...
Click to collapse
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
THE MAXIMUM POWER said:
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
Click to expand...
Click to collapse
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Broomfundel said:
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Click to expand...
Click to collapse
With the -ta option I get both the .hex and the .aml file but you can try -tc if it doesn't work. Maybe due to the different build
P.s. (for other people that may incur in this) If you don't get the output files check that you have as last line of the terminal
"Compilation complete. 0 Errors"
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Poz1 said:
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
Click to expand...
Click to collapse
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Poz1 said:
Hello guys!
Click to expand...
Click to collapse
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
As Poz1 is obviously busy at the moment. Can anyone else get the DSTDWin.aml file for me to try and decode?
Thanks
Sorry guys I've been busy with university
Broomfundel said:
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
Click to expand...
Click to collapse
There you go I'm also updating the files DSTDWin of my blog with one with some fixes Well they depend on the settings you use in your Bios (that's why Windows may not boot after install, it changes some parameters (the wait time of the bios and the default boot partition)). When you use the builtin one is the bios that "updates" it for you but for now we need to do it by hand If we are going to end with everything working we can release a patched "Win" bios and everything will be simpler
Riskypedia said:
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Click to expand...
Click to collapse
I know There something in the DSDT (the file that tells the os which and where your pc components are) that has to be fixed to make Windows see these parts correctly
THE MAXIMUM POWER said:
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Click to expand...
Click to collapse
Didn't try Will do as soon as I have some free time :fingers-crossed:
Kinyapiplele said:
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Click to expand...
Click to collapse
Yep, but the problem is in the DSDT Thanks fot the input anyway
Poz1 said:
Sorry guys I've been busy with university
Click to expand...
Click to collapse
Don't worry, we all have real lives as well. I'm in the UK and we have a bank holiday on Monday. So this weekend, Ill get stuck in again.
Thanks for all your doing on this. You have already got further than anyone else who tried.
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Poz1 said:
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Click to expand...
Click to collapse
Just another Question, you as a Advance user, do you believe that we (yoga book Windows owners) can boot Android yb STOCK ROM ( i mean not the Android x86 based distros)?
Yes, but I think you would have to do the "reverse" DSDT injection (from win to android) as the official ROM has drivers for that components.
This means that, if you're lucky you would end up with our same problems (keyboard, pen and touch). If we don't fix that before
The problem with Android is that it is meant to be flashed on rom instead of being installed and this makes things more difficult.
It should be possible to flash the rom on an USB key, add grub and use it for DSDT injection like we do and see what happens.
Another problem is that the provided kernelflinger seems to have most of the security options enabled so 99% it will refuse to boot anyway.
Since it is opensource it should be possible to fix this anyway.
So yes, but it a loooong journey