The adaptation of Realwo X50 Pro Player Edition to Android 11 Beta 1 (Android R) has been completed.
This version is only for developers who need it for browsing experience, and does not have the ability to continuously update, so ordinary real fans are not recommended for daily use.
Your Realme X50 Pro player version (RMX2072) needs to be upgraded to a specific Android 10 (Android Q) benchmark version before it can be swiped to Android 11 Beta 1 (Android R).
At the same time, we have also prepared a card swiping package for the real me X50 Pro player version to swipe Android 10 back for use after the experience is completed.
Before the experience, please read the following precautions carefully:
risk warning:
1. Make sure that your model is Realme X50 Pro Player Edition (model RMX2072);
2. This version is only for application developers, and only for compatibility testing and early development. This version has different stability and performance issues on all devices and is not suitable for daily use on mobile phones, especially for ordinary real fans who are not developers;
3. On the beta version of Android 11 beta 1, some applications may not work properly. This includes Google apps and other apps;
4. After the device is flashed into the Android 11 developer preview version, the user data of the device will be cleared. Before flashing, please make sure that your personal data has been backed up: Settings -> Other Settings -> Backup and Restore -> Backup and Restore, select Please copy the data to be backed up to an external storage device after the backup is completed;
5. Reverting from Android 11 version to Android 10 version will clear the user data of the device. Please make sure that your data has been backed up before reverting;
6. This upgrade needs to first upgrade to the benchmark version of Android 10
(RMX2071_11_OTA_0200_all_1w62iExuuCpj.ozip), then you can upgrade to the Android11 version (RMX2072_UpdateBack2Android10_V200704.ozip)
Flashing steps:
1. First back up important mobile phone data to a network disk or computer;
2. Download the Android 10 benchmark version firmware package and Android 11 experience version firmware package to any folder on the phone;
3. Find the Android 10 benchmark firmware package in the phone folder, and click install;
4. (This step will clear all the phone data) Turn off the phone after successful installation. After shutting down, press and hold the "power button" and "volume down button" to enter the recovery mode, follow the on-screen instructions, select the installation upgrade file, find the Android 11 experience version firmware package, and click install;
5. Do not click any button on the phone during the installation process, the phone will be successfully upgraded to Android 11 Beta 1 after automatic restart.
common problem:
Q: Does the card support X50 Pro 5G?
A: Not supported. Realme X50 Pro 5G's (RMX2071) Android 11 beta 1 adaptation, please go here https://www.realmebbs.com/post-details/1278168964924452864
Q: Will my mobile phone data be cleared after flashing?
A: Yes. Please backup important data before flashing
Q: Is this Android 11 Beta 1 based on realme UI 1.0?
A: Yes
Q: After flashing to Android 11 Beta 1, can I continue to receive updates?
A: No. You need to go back to the A.20 version provided below before you can receive the push normally
Q: Will there be bugs in Android 11 Beta 1 this time?
A: There will be some. Including some system functions are unavailable, some third party App icon interface is not beautiful enough, some apps may not run, and system stability is reduced
Q: How to flash back to Android 10 (Android Q)?
A: Download the standard version of A.20 (realme UI 1.0) below (card swipe package) to any folder of the phone, click the card swipe package directly in the phone file management, and continue in the pop-up prompt clear data dialog box Click OK, the phone will automatically restart and restore to the standard A.20 version.
Flashing information:
Realme X50 Pro player version back to A.20 (realme UI 1.0) standard version (card package) download:
Link: https://bit.ly/2WUkWwu
Realme X50 Pro player version back to A.20 (realme UI 1.0) DECRYPTED standard version (card package) download:
Link: https://bit.ly/2OUypQH
Realme X50 Pro player version Android 11 Beta 1 (Android R) experience version (card swiping package) download:
Link: https://bit.ly/2WX6IuS
If you encounter problems during the experience, please leave a message and feedback under this post, and we will check it carefully.
"Note: hope we can create TWRP for this Version or we can have Stock Recovery.img"
i provided the files needed please let's help each other
i managed to cook Stock recovery.img,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Work in 2075?
I don't really know what the nickname of the x50 pro is ... I don't know if it's 2075
It only Works in RMX2072
kuto232 said:
Work in 2075?
I don't really know what the nickname of the x50 pro is ... I don't know if it's 2075
Click to expand...
Click to collapse
no, it will work only in rmx2072, bec they have different recovery.img so once you flash it you will experience bootloop.
Guys, can i flash the EU rom of RMX2071 onto my RMX2072 ?
Guys, can i flash the EU rom of RMX2071 onto my RMX2072 ?
my mine rmx2072. is there anyone have twrp for pro player
Any rom for rmx2072 rather than the Chinese one?
RMX2071
Hello. I got problem with accessing cloud Baido, is there any other source to download file RMX2071_UpdateBack2Android10_V200629.ozip?
but this procedure works? have you tried it?
Ovanes said:
RMX2071
Hello. I got problem with accessing cloud Baido, is there any other source to download file RMX2071_UpdateBack2Android10_V200629.ozip?
Click to expand...
Click to collapse
I'm looking for this file too.
for RMX2071.
Have you found somewhere?
Hello.
I would appreciate the answer if someone knows if is possible RMX2072 that is in bootloop to fix somehow? I have experience with xiaomi phone flashing but not with Realme and I can buy one RMX2072 that is in bootloop so just to know if I would be able to fix it...
Thanks
Related
B008 Full Flash (Public Release)
Apparently, Huawei has deemed the latest B008 version to be stable enough for public consumption and thus has released it as the final (for now) EMUI 3.0 / 400 dpi ROM for Mediapad X1 501u.
For full ROM download, kindly visit:
http://www.emui.com/nsp/geturl.php?path=7D-501u_EMUI3.0_Android4.4_V100R002C208B008.zip&rid=901
(kindly note this is a FULL ROM, not an incremental update. Flash as per how you would normally flash a full rom; remember to backup your data prior as flashing a full rom most probably will wipe your data)
Another leaked official beta ROM from Huawei for 7D-501u.
The main feature in this ROM is EMUI 3.0, for those who are still in the dark, EMUI is the skin which Huawei applies over stock Android, think Sense for HTC, Touchwiz for Samsung. EMUI version for current ROMs is 2.3 for KK and 2.0 for JB.
This beta ROM is 4.4.2 based and uses a framework of 400DPI.
B002 Full Flash
http://www.mediafire.com/download/1n0rxw6ae17mlt6/7D-501uV100R002C208B002.zip
B005 Update (this is an 80MB update, your 501u needs to be already on the B002 ROM above to be able to flash; flashing procedure as below, thanks to bthoven)
http://www.mediafire.com/download/3ecpzlih5hqa05m/7D-501uV100R002C208B005.zip
1. Create dload folder in internal sdcard
2. Copy the whole b005 zip file to dload folder (don't unzip it)
3. Rename the b005 zip file to update.zip
4. Local update
http://forum.xda-developers.com/showpost.php?p=56766405&postcount=56
B005 changelog (edited translation provided by bthoven through Google translate)
http://forum.xda-developers.com/showpost.php?p=56742863&postcount=51
Newly added options:
1. Added 4G only (for 4G model), 3G only option
2. Added option to turn on the screen when a new message has been received
3. Added speed dial function to dialer interface
Important optimizations:
1. Optimizes memory allocation and management strategy
2. Optimizes the UI layout and icon adaptation
3. Fully optimized system stability, fixed rare instances of phone hanging and other problems
4. Optimizes network search time
5. Optimizes power consumption during phone standby with screen off when data is switched on
6. Fixed silent installation problem for App Store
7. Fixed delay reception of WeChat messages
8. Fixed various UI performance problems i.e. screen lagging when scrolling list of installed apps or when returning to home screen from web browser and also other instances when the phone appears unresponsive
9. Adjusted the indications layout for data services
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
B006 Update (this is an 60MB update, your 501u needs to be already on the B005 ROM above to be able to flash; flashing procedure as below, [same as that for B005])
http://www.mediafire.com/download/aggcrualriz1hhu/7D-501uV100R002C208B006.zip
1. Create dload folder in internal sdcard
2. Copy the whole b006 zip file to dload folder (don't unzip it)
3. Rename the b006 zip file to update.zip
4. Local update
B006 changelog
Important optimizations:
B008 Update (this is a 35MB update, your 501u needs to be already on the B006 ROM above to be able to flash; flashing procedure same as below, [same as that for B005])
http://www.mediafire.com/download/sop3lnafdjseit4/7D-501uV100R002C208B008.zip
Great news... :thumbup:
Time for testing
Sent from my Galaxy Nexus using XDA Free mobile app
Looking forwards to test result, especially about app compatibility.
FAILED to Update
My Current Version:
7D-501uV100R002C233B010
EMUI 2.3
check_update_package_load suceed
check_update_package_signature suceed
check_update_package_valid failed !
AhmadDawood said:
FAILED to Update
check_update_package_load suceed
check_update_package_signature suceed
check_update_package_valid failed !
Click to expand...
Click to collapse
for me too
it is untested fake
If you have previous ROM around, simply replace the update.app file , retaining the 2 cfg files and then flash again to see if it works.
If you don't, download the attachment below for those 2 files.
If it still doesn't work, it means the source is bad.
Original B010 4.4.2 EMUI 2.3 400DPI ROM from Huawei Direct if you dont already have it - http://www.emui.com/nsp/geturl.php?path=7D-501u_EMUI_2.3_V100R002C233B010.zip&rid=592
potatohead said:
If you have previous ROM around, simply replace the update.app file , retaining the 2 cfg files and then flash again to see if it works.
If you don't, download the attachment below for those 2 files.
If it still doesn't work, it means the source is bad.
Click to expand...
Click to collapse
Don't work, FAILED to Update
My Current Version:
7D-501uV100R002C233B010 EMUI 2.3
sorry folks.
source is bad i guess.
download link removed.
will update thread if new source found.
I successfully flashed it at the second time with another bigger rom download.
I can say that it is not worth of flashing because font size is very small and chrome is not compatible totally with phone page.
So, I decided to flash back to C233B010.
Don't waist your time.
vuhongduong said:
I successfully flashed it at the second time with another bigger rom download.
I can say that it is not worth of flashing because font size is very small and chrome is not compatible totally with phone page.
So, I decided to flash back to C233B010.
Don't waist your time.
Click to expand...
Click to collapse
Sorry dear, it seems your comment is not relevant to this thread. This rom is with EMUI 3.0 and 400 DPI. How the font can be very small? You have posted the same comment in another thread where it is relevant.
vuhongduong said:
I successfully flashed it at the second time with another bigger rom download.
I can say that it is not worth of flashing because font size is very small and chrome is not compatible totally with phone page.
So, I decided to flash back to C233B010.
Don't waist your time.
Click to expand...
Click to collapse
where is this bigger rom ?
AhmadDawood said:
where is this bigger rom ?
Click to expand...
Click to collapse
I have updated the URL in the opening post from a new source.
http://www.mediafire.com/download/1n0rxw6ae17mlt6/7D-501uV100R002C208B002.zip
It has been reported to work.
Feel free to try it and report back if it ain't working.
potatohead said:
I have updated the URL in the opening post from a new source.
It has been reported to work.
Feel free to try it and report back if it ain't working.
Click to expand...
Click to collapse
WAAAAAW ... Excellent.... really new and very smooth polished new emui 3 Interface
This is really fantastic
thanks for your Link bro
AhmadDawood said:
WAAAAAW ... Excellent.... really new and very smooth polished new emui 3 Interface
This is really fantastic
thanks for your Link bro
Click to expand...
Click to collapse
Welcome.
Glad it works this time round and thank you for your confirmation.
So questions:
Can access google play store?
Some apps compatibility issues?
Chinese rom? Not international rom?
Thx for replying
it is not working again
can u post screenshots plz
0/ what about e-mail client in stock - can't set up gmail (imap enable)
The Latest Link Posted by [potatohead] on 6 Nov. worked Great with no single problem
Concerning Google Apps and services,,this rom does not include them but you can easily download Google Play,Gmail....etc
as I did and all of them worked Great and excellent
it is a Chinese rom but includes all languages....for me I found even the Arabic Language in both the interface and Google KB .which was not found in the B010 Emui 2.3
also the stock Email Client is great including templates for all known Email providers including GMAIL
I have downloaded various Apps from Google Play(after installing it) with No compatability Problems
yes some app issues and non-complaint as what i discussed in '7d-503L 4.4.2 emui 3.0 400 dpi' thread. however this rom is not for LTE handset
When the official rom 3.0 will be relase?
Hey, I wanted to share with you people a little experiment I've been trying.
We have been seeing a lot of 9.0 ROM's come to our Amlogic devices and when I found out about the presence of the Project Treble on these I wondered about the possibility of booting Certified Images, like the Mi Box S, on my device.
So I installed DaivietPDA 9.0 for TX5 Pro ROM (which is the one I found to work best on my device, other ROM's such as ATVXPERIENCE should work as well), downloaded an OTA Image for Mi Box S 9.0 update, converted the system.new.dat.br to system.img, used TWRP to install the system and VOILA!!! IT BOOTED!! Everything is working perfectly, WIFI, Bluetooth, etc, etc. (Even with different wifi chips, since the vendor is untocuhed). One amazing thing I also noticed is that finally I was getting Play Store Certification. Also, don't forget to disable Chromecast app it won't work without certification, will just make your device slower.
It would be pretty interesting for someone with a AOSP ROM 9.0 who wants to get Android TV. I also thought about the possibility of booting ROM's from Android 10 devices like the Chromecast with Google TV but I don't think it will be possible since those devices will be using vndk29 while the 9 ROM's are vndk28 but I could be wrong, on the same thought I'm not sure if other Amlogic chipsets such as S912, S905X2, etc will be compatible as well as I don't own one personally but if someone could test, would be appreciated.
Anyway, I'll leave down bellow what I've used to get it booted and some screenshots (even though you're already familiar with Android TV UI). If you think I should do a more detailed tutorial let me know and most importantly I want to get some feedback from other people who try this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM I've Used
https://daivietpda.com/2020/03/rom-atv9-v6-cho-tx5-tx5-limited-tx5-pro/
Mi Box S OTA Update
https://r3---sn-2vgu0b5auxaxjvh-v2vz.gvt1.com/packages/data/ota-api/xiaomi_oneday_oneday/811d10683084df7512b6cd56d137d53193c81856.zip?cms_redirect=yes&mh=eW&mip=2001:8a0:e548:8600:5131:81e4:bac6:79d2&mm=31&mn=sn-2vgu0b5auxaxjvh-v2vz&ms=au&mt=1604570212&mv=m&mvi=3&pl=42
TWRP
(attached down bellow)
Great find lad!
have you tested Netflix and other similar services?
micallan_17 said:
have you tested Netflix and other similar services?
Click to expand...
Click to collapse
Disney+ works fine, Netflix it's still broken as the Widevine is still Level 3.
DiogoSilva48 said:
Disney+ works fine, Netflix it's still broken as the Widevine is still Level 3.
Click to expand...
Click to collapse
Awesome, Thank you
Hi,
it's great! You may try to copy widevine related files from the Mi Box vendor to the working vendor ...
gcsuri said:
Hi,
it's great! You may try to copy widevine related files from the Mi Box vendor to the working vendor ...
Click to expand...
Click to collapse
Nope, widevine keys are hidden in bootloader.
gr8 work bro, actually i was searching for a certified ATV Rom and play store.
my device is x96 Max 4/64 aml s905x2 u212 running XTM_X96M4G_ATV9_V1_0 (XTMOD v1 custom rom).
the question is what about flashing the update directly without the Rom you used??
Ok Here's What I found playing with this, may be helpful for someone
I Tried Flashing From Many Firmware's (At least 8 Different 9.0 Firmware's Some Android TV Others Not TV) And Davietpda (Namely Version I Used: aml_upgrade_package_s905x-tx5-atv9-v6-fix-ce AP6212) was the only firmware to successfully boot into TWRP (other roms would fail to install TWRP with a error about permissions or if it did install it would not get past the TEAMWIN boot logo so couldn't try to install the system.img)
Using The Davietpda v6 firmware worked but i had no Wi-Fi, Bluetooth Or Remote Control (Only HDMI CEC & USB)
I Attempted To Repackage Davietpda Firmware With The Vendor Partition Replaced With one From an older davietpda firmware that my Wi-Fi & Remote Worked in (This Is Actually V1 of Davietpda ap6212 But NOT in v6 With Wi-Fi my Wi-Fi being AP6212a, The "A" variant seems to need different nvram)) This Was Unsuccessful
I Then Made A USB Burn Tool IMG with Only V1 Davietpda Vendor Partition and flashed this using USB Burn Tool
After Flashing The Image And Letting The System Try & Boot, it failed to boot and came up with recovery options, After A Factory Reset Here my system booted with working Wi-Fi Bluetooth & Remote Control
In The Time Since Posting This I Have Crafted 2 Base Firmwares (Not Android TV) To Flash Over, Then Created 3 TWRP Install Zip Files
● If Wi-Fi Already Works,
● For Ap6212a (The A Variant Needs Different NVRAM.txt) & Maybe Others
● Universal Version That Should Install Over Treble Enabled Firmware (Using TWRP & This Is Untested)
without sounding stupid what boxes would your method work with?
markeymark said:
without sounding stupid what boxes would your method work with?
Click to expand...
Click to collapse
Hi, His Method Would Work On Any Device That Can Install The Base Firmware & Maybe More
aidanmacgregor said:
Hi, His Method Would Work On Any Device That Can Install The Base Firmware & Maybe More
Click to expand...
Click to collapse
ok another stupid question, why not just install the base firmware directly first??
Not a stupid question at all that's how we learn and I'm not sure what you mean by this but I assume this is what you wear looking for awnser wise, the firmware is only released as an OTA update package so needs files & partition layout from a base FW to update to
Hi DiogoSilva48
I tested it on Mini M8s II and It's very good. Thank you very much!
I have 1 android box other used S912, I have installed firmware slimbox ATV 9, however bluetooth and wifi are not working.
I have stock Android firmware 7.1.2, can you integrate bluetooth, wifi into slimbox firmware? Or show me how to do it?
deohieu712 said:
Hi DiogoSilva48
I tested it on Mini M8s II and It's very good. Thank you very much!
I have 1 android box other used S912, I have installed firmware slimbox ATV 9, however bluetooth and wifi are not working.
I have stock Android firmware 7.1.2, can you integrate bluetooth, wifi into slimbox firmware? Or show me how to do it?
Click to expand...
Click to collapse
wifi drivers from android 7 wont work in android 8+ due to newer kernel, drivers would need to be compiled for 4.19 kernel (not android 7 3.14)
Hi,
I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary.
This will activate dual sim mode on the phone with a single IMEI, I left my location set to Europe so it is upto you if you follow the last step to remove Dual Sim Mode.
You will need to backup anything you don't wish to lose as a full factory reset is required.
Requirements:
OPPO A72 - My bootloader is locked, My simlock is off
CPH2067_11_A.54 Latest European ROM for the device - Download Here: https://support.oppo.com/nl/software-update/software-download/?m=A72
Oppo Free Unlock Tool - https://forum.xda-developers.com/t/...de-to-coloros-11-and-enable-dual-sim.4191787/
A Google account to download ExpressVPN (This is the second last step so leave for now)
A Windows PC with a internet connection
WIFI or Mobile data on phone.
Latest ADB Drivers - https://adb.clockworkmod.com/
Instructions:
1) Backup all settings and user data.
2) Remove all accounts and screen lock security settings on phone.
3) Format all data, factory reset phone.
4) Download Oppo Free Unlock Tool from the link provided to PC.
5) Follow these instructions to install Microsoft Loopback Adaptor -
6) Open Device Manager and expand the Network Adapters category.
7) Find your Loopback Adaptor and double click it to open its properties.
8) Go to the Advanced tab and find the Network Address option in the Property pane.
9) Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
10) Install ADB Drivers.
11) Extract OPPO Free Unlock Tool, You're antivirus may give a false positive so you will have to manually add an exception for the tool.
12) Go to where you extracted the unlock tools. Open Sec5.exe.
13) Plug in phone via USB and select "Transfer Files".
14) Enable developer options on phone and activate USB Debugging.
15) Press Allow when prompted to give PC ADB access.
16) Open Sec5 window.
17) After about a second, a string of numbers and letters should show up in the left pane, Press Start Unlocking and few seconds later, "OK" should start flashing in the right pane.
18) Press stop unlocking and disconnect phone.
19) Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. (Take note of the one highlighted in green as you will need this in the final step).
20) Choose this one: "Europe EUEX" and click Ok you're phone will restart.
21) Download the rom from provided link to the phone and install through recovery mode.
22) Add your google account and download ExpressVPN from Play Store.
23) Open ExpressVPN and start 7 day trial then set to Netherlands server.
24) Goto Settings then Software Update and you will see Android 11 available to download.
25) Click Download then when complete Click Install
26) Remove Google Account from phone and factory data reset again.
27) Use instructions 12-20 to set your phones location back to your original setting.
That's All Folks
Hi! I'm from Germany.
I use Orbot and set the language to Dutch (Netherland). Then I went to Settings » Software Update. The new Android version 11 is now available. The version displayed is: CPH2067NV44_11_C.71
I have to consider installing this version as I don't know if it will lead to complications. Can I simply set the language to German in the settings? I don't have Windows at the moment and can only use Android tools. It is explicitly NV (Netherland Version) in the firmware version.
Whether that is EU or EUEX... no plan.
So far I haven't loaded the update either because I'm afraid that I will never get the "thing" to root.
Without root it's only half a smartphone, although I'm pretty happy with the A72.
Friendly greetings to everyone!
<-- དτ-νίરƲȘཌ --> ヾ(･ω･*)ﾉ
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
tvirushive3 said:
Hi! I'm from Germany.
I use Orbot and set the language to Dutch (Netherland). Then I went to Settings » Software Update. The new Android version 11 is now available. The version displayed is: CPH2067NV44_11_C.71
I have to consider installing this version as I don't know if it will lead to complications. Can I simply set the language to German in the settings? I don't have Windows at the moment and can only use Android tools. It is explicitly NV (Netherland Version) in the firmware version.
Whether that is EU or EUEX... no plan.
So far I haven't loaded the update either because I'm afraid that I will never get the "thing" to root.
Without root it's only half a smartphone, although I'm pretty happy with the A72.
Friendly greetings to everyone!
<-- དτ-νίરƲȘཌ --> ヾ(･ω･*)ﾉ
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Click to expand...
Click to collapse
Hi you can install the update and set your language on the initial setup screen for new rom. As for root i have been unable to root android 10 or 11 for this device. If you know of a way to root it would be great to learn from you
tvirushive3 said:
Hi! I'm from Germany.
I use Orbot and set the language to Dutch (Netherland). Then I went to Settings » Software Update. The new Android version 11 is now available. The version displayed is: CPH2067NV44_11_C.71
I have to consider installing this version as I don't know if it will lead to complications. Can I simply set the language to German in the settings? I don't have Windows at the moment and can only use Android tools. It is explicitly NV (Netherland Version) in the firmware version.
Whether that is EU or EUEX... no plan.
So far I haven't loaded the update either because I'm afraid that I will never get the "thing" to root.
Without root it's only half a smartphone, although I'm pretty happy with the A72.
Friendly greetings to everyone!
<-- དτ-νίરƲȘཌ --> ヾ(･ω･*)ﾉ
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Click to expand...
Click to collapse
Wow..you are the best maaan..omg..updated to 11 right now with Tor..and all its fine thank you...and yes.. with Tor its x10 faster to update than how that guy uper wrote a big legend and to use pc and a lot of steps and software to download..... with Tor it very fast
Skerleton said:
Wow..you are the best maaan..omg..updated to 11 right now with Tor..and all its fine thank you...and yes.. with Tor its x10 faster to update than how that guy uper wrote a big legend and to use pc and a lot of steps and software to download..... with Tor it very fast
Click to expand...
Click to collapse
you can explain the procedure to me. I tried with orbit but it does not work. maybe because of the latest firmware 58 right?
No need for VPN anymore, just for Europe version.
Just got a system update tonight. Without needing to wipe the device.
'ColorOS 11.1 ~ Android 11' for the OPPO A72 ~ CPH2067_11_C.71
corkiejp said:
No need for VPN anymore, just for Europe version.
Just got a system update tonight. Without needing to wipe the device.
'ColorOS 11.1 ~ Android 11' for the OPPO A72 ~ CPH2067_11_C.71
Click to expand...
Click to collapse
Although the version I got from changing to Kazakhstan is 11_C.74
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^^^ Also been offered that version as well now. 697mb update. Earlier version was updating from Android 10 & COS 7.
If we can Download the update and put it on the SD, Is it posible to upgrade in another regions?
CarnageHimura said:
If we can Download the update and put it on the SD, Is it posible to upgrade in another regions?
Click to expand...
Click to collapse
As yet im unable to get a rom file, will let you know if i can find one
today without vpn from France
Thank you for sharing
Thankyou for sharing this useful info
I am using pure safest and free vpn from https://vpnprofy.com/purevpn-alternatives/ for my mobile.. highly recommended
Hello guys as you know xiaomi shut down weekly beta updates for MI 8 but one os is based on last xiaomi eu so you can test miui 12.5 new
"This is not my work I'm just sharing this to you"
Here is the rom : https://sourceforge.net/projects/one-os/files/2021/21.5.3/OneOS_MI8_21.5.3_V12-10.zip/download
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How about the privacy protection? and how the battery usage compare to stable 12.04 thanks
Privacy is same but battery life is a little bit worse
siang930615 said:
How about the privacy protection? and how the battery usage compare to stable 12.04 thanks
Click to expand...
Click to collapse
raminta said:
Privacy is same but battery life is a little bit worse
Click to expand...
Click to collapse
Thanks for telling then I guess it's only using latest apk from 12.5 n not the real 12.5
I'm waiting official 12.5 then thanks for sharing
siang930615 said:
Thanks for telling then I guess it's only using latest apk from 12.5 n not the real 12.5
I'm waiting official 12.5 then thanks for sharing
Click to expand...
Click to collapse
Yes of course
But also it syncs with lastest xiaomi eu rom changes
It's not official. I'll wait until then. Thank you btw.
Updated
One os 11.5.21
Rom website : https://one.revtechs.me/en/download
Download link : https://downloads.sourceforge.net/p...forge.net/projects/one-os/files/2021/21.5.11/
Changelog:
OneOS changes:
Optimized - Removed from vendor: ConnectionSecurityService (Qualcomm data transfer to their servers), SensorTestTool (Gyroscope and luminosity related sensors test) and SSGTelemetryService (Qualcomm and Xiaomi data transfer to their respective servers)
Optimized - OTA Updater renewed
New - Added support for Mi 10T Lite/Redmi Note 9 Pro 5G, Redmi K30 / Poco X2, Mi 9 SE and Mi 9 Lite / Mi CC9
Fixed - Fixed an error that prevented giving permissions to AirDots and AirDots Plugin I have invalidated their correct use.
Fixed - Fixed a error with update system applications
Fixed - Stability improvements
**Note: It is not a new base since Xiaomi is on vacation until May 14, it is simply our version with corrections of errors related to us
Update
One os 3.6.21
Download link : https://downloads.sourceforge.net/project/one-os/2021/21.6.3/OneOS_MI8_21.6.3_V12-10.zip?ts=gAAAAABguutSyZmODZwdHWCAKR6QUAqo_U12EPkZz45a_www2T5VfzzUxRk3Lqq_WZO_UdStS8geeqOg4hoEha0PsAug7WZrJA==&use_mirror=deac-fra&r=https://sourceforge.net/projects/one-os/files/2021/21.6.3/
OneOS changes:
OPTIMIZE - Updated the Security application to its most recent version of the weekly versions
OPTIMIZE - Updated MIUISystemUIPlugin to its newest version of the weekly versions
OPTIMIZE - Launcher updated to be the same one used by BASE WEEKLY
NEW - Poco Launcher will disappear permanently and MIUILauncher will be used on devices from the "Poco" devices
Hey!
I must congrats you for the work. It's amazing!
But I've trying to use Engineer Mode on my Mi 9 Lite with the last version of OneOS 12.6 , but it just don't work. Did the code has changed with this ROM?
Using the latest twrp, I tried to install the three latest version of this rom but all of them gave me bootloop. What seems to be the problem?
indong said:
Using the latest twrp, I tried to install the three latest version of this rom but all of them gave me bootloop. What seems to be the problem?
Click to expand...
Click to collapse
Did you tried to flash DM-verity???
I mean this : https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
raminta said:
Did you tried to flash DM-verity???
I mean this : https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
Click to expand...
Click to collapse
The instruction says..
Add 'enfec' or en'forceencrypt' to zipname to keep forceencrypt enabled if present
Add 'fec' or 'forceencrypt' to zipname to disable forceencrypt (zipname already has this so remove these if you want to keep it enabled)
Add 'quota' to zipname to disable disc quota
Which of these should I add to the zip file? Do I add the 'enfec' or the 'fec' or the 'quota' ?
indong said:
The instruction says..
Add 'enfec' or en'forceencrypt' to zipname to keep forceencrypt enabled if present
Add 'fec' or 'forceencrypt' to zipname to disable forceencrypt (zipname already has this so remove these if you want to keep it enabled)
Add 'quota' to zipname to disable disc quota
Which of these should I add to the zip file? Do I add the 'enfec' or the 'fec' or the 'quota' ?
Click to expand...
Click to collapse
Just flash the zip without renaming it
Or maybe new version is different
I will upload the zip that I use
Ps. I use orange fox recovery maybe it will help you
Edit: here is the file :
raminta said:
Just flash the zip without renaming it
Or maybe new version is different
I will upload the zip that I use
Ps. I use orange fox recovery maybe it will help you
Edit: here is the file :
Click to expand...
Click to collapse
Thanks man! My phone finally boot on this rom. What I did is (using twrp recovery) format my data then flash the latest one os rom then the dm verify zip (without renaming it). The only hassle part is formatting my data. Need to back up everything with my laptop then put everything back to my phone. Do I need to flash the dm verify zip every update of this rom?
indong said:
Thanks man! My phone finally boot on this rom. What I did is (using twrp recovery) format my data then flash the latest one os rom then the dm verify zip (without renaming it). The only hassle part is formatting my data. Need to back up everything with my laptop then put everything back to my phone. Do I need to flash the dm verify zip every update of this rom?
Click to expand...
Click to collapse
Your welcome
No you can update without formatting data
raminta said:
Your welcome
No you can update without formatting data
Click to expand...
Click to collapse
I mean do I have to flash the "disable_dm-verify_forceencript.zip" every rom update?
indong said:
I mean do I have to flash the "disable_dm-verify_forceencript.zip" every rom update?
Click to expand...
Click to collapse
No
Update?
https://sourceforge.net/projects/one-os/files/2021/21.8.3/OneOS_MI8_21.8.3_V125-10.zip/download
Hope to see this rom on xiaomi mi note 10 lite toco global too.. please
Hi All,
I'm trying to install ArrowOS13.1 on my Mipad 5 Pro without sucess and wondered if anyone had been sucessful?
I tried some stesp I found here https://forum.xda-developers.com/t/arrowos-v13-1-mi-pad-5-pro-12-4-dagu-step-to-install.4579335/ but just up to the flashing the payload file as I don't think the vendor boot etc are required since I think those steps were to get the elish rom working on a dagu device.
From the start it didn't go well. I had the Lynnrin rom on originally. When I went to flash 13.1 it worked, but although I had the vanlla version the tablet had gapps on it, Doh, I need to wipe the data partition. So I did that with XiaomiToolv2 (i think it was a few days ago), but after that no booting at all. Damn, ok lets recover with XiaominToolv2, i've done that before sucessfully. That failed becuase because no matter what I could not get into fastbootd mode. But i eventually got the machine flashed by using the flash_all.bat file in the stock rom from XiaomiToolv2 by using an updated fastboot and shortening the file path to the rom. What I didn't realise at the time was thatit was now a different version of the rom (MIUI 14 now)
So great I've got stock back. Now I try to flash the payload filefor 13.1 which flashes, but won't boot. I tried swapping slots for booting but that didn't help.
Has getting it on MIUI 14 locked me out?
I don't want to flash back to MIUI 13 stock as I've heard XIAOMI has an anti rollback thing in place that bricks devices (but I think but not willing to bet, that this doesn't have anti rollback)
Thanks
Hey crass00,
If you're still wondering on how to install Arrow 13.1 on elish, I think you can just follow Lynnrin's past instructions on installing Arrow 12. Copy-pasted below (credit to Lynnrin, modified for clarity, link replaced with the new one you posted in another thread):
Spoiler: Install Custom ROM on Mi Pad 5 Pro (elish)
1. Unlock bootloader
2. Reboot to fastboot
3. Flash MIUI Recovery by this command fastboot flash boot miui_recovery.img
4. Reboot to recovery by this command fastboot reboot recovery, and format data on MIUI Recovery
5. Hold power button + volume down, when screen off, release power button, release all button when it get in bootloader.
6. Flash AOSP recovery by this command fastboot flash boot aosp_recovery.img
7. Reboot to recovery by this command fastboot reboot recovery
8. Enter to sideload mode by this command adb reboot sideload-auto-reboot
9. Sideload zip by this command adb sideload ***.zip (change ***.zip to the Arrow13.1 ROM zip file, in my case I used Arrow-v13.1-elish-OFFICIAL-20230426-GAPPS.zip)
10. Once that custom ROM installed on your Pad.
p.s. on number 9, when sideloading the ROM, the percentage progress seems to be stuck at 47% for a long time for me, don't panic and just leave it for a few minutes, it will magically finish the process and reboot the tab automatically.
I don't think there's any need to flash back to MIUI 13 as I've also made the mistake of flashing it to MIUI 14 first, and there doesn't seem to be any problems so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Super that worked. Many thanks.
I actually tried this way last night but failed at the step to delete data. I don't read chinese so couldn't delete data, figured I'd just wiped the device fully with a MIUI restore anyway so whats the need and moved on. That was a mistake With the confirmation it works i installed google translate on my phone to find my way though the menu.
I hope now once an update comes out the data delete step isn't required. That could get annoying if it is
Yeah, I'm wondering about that too actually.
My assumption is that the aosp_recovery.img is already installed as the recovery, so maybe we could just start from step 7?
I'm completely unsure though.
For other devices that I used usually there's a working TWRP recovery and I could just do flashing/updating through TWRP.
At least there doesn't seem to be any major bugs for this Arrow 13.1 build for elish (dagu in the other thread has camera problem).
What's wrong with the official instructions from the maintainer?
Instructions thread for (elish) MiPad 5 Pro on ArrowOS - HackMD
# Instructions thread for (elish) MiPad 5 Pro on ArrowOS This blog post is dedicated to [Xiaomi Pad
hackmd.io
Didn't notice it
i can verify this device does not have anti-rollback
I once went from android 12 to android 11
and from android 13 to android 12
so it should be just fine
it's just that sometimes miflash showed an error after flashing
I succesfully flashed this on enuma after 2 attempts using Lynnrin's past instructions but with the newer build
first attempt was with miui 13 (Android 12) but it automatically stopped at 47% and rebooted so it didn't fully flash arrow
for my second attempt I first flashed miui 14 (android 13) and then did the same process again but this time it worked just fine
I guess the logic is that you have to be on the android version you want to flash
camera works (on dagu it doesn't for some reason)
and the xiaomi smart pen also works
edit: is it just me or does the wifi feel slower?
niveZz said:
I succesfully flashed this on enuma after 2 attempts using Lynnrin's past instructions but with the newer build
first attempt was with miui 13 (Android 12) but it automatically stopped at 47% and rebooted so it didn't fully flash arrow
for my second attempt I first flashed miui 14 (android 13) and then did the same process again but this time it worked just fine
I guess the logic is that you have to be on the android version you want to flash
camera works (on dagu it doesn't for some reason)
and the xiaomi smart pen also works
edit: is it just me or does the wifi feel slower?
Click to expand...
Click to collapse
All process being run by AOSP recovery will stop at 47%. But you will be noticed by a line of message saying successfully or not.
In my case, I flashed MIUI Android 12 and using A13 GSI ROM. Everything works fine except the GSI ROMs do not support Xiaomi peripherals.
How do I install Magisk using this rom?
I tried following this but then devices wont boot up again