Hello , is it possible ?
Someone said find menu (don't know how) and had the ability to change fingerprint ms speed ...
it's a bit slow at note 10 light
Hi, after update to xiaomi EU 11.0.8 from 11.0.1 vodafone, the finger printer is more more fast and read nothing error. I used to have trouble reading the print of any finger. Things have improved a lot now.
Inviato dal mio Mi Note 10 Lite utilizzando Tapatalk
I don't think that the fingerprint sensor is slow, i think the problem is that you didn't register properly the fingerprint, and the sensor is having a hard time finding matches.
Try to remove your current finger and register it again but this time register the sides of the finger first, try to cover all 360 degrees of your thumb, you have plenty of trials to cover all the finger.
I also had a problem, where i registered a fingerprint before i installed a glass screen protector, that made the fingerprint very slow, removing and registering the finger with the glass on did the job.
JoraForever said:
I don't think that the fingerprint sensor is slow, i think the problem is that you didn't register properly the fingerprint, and the sensor is having a hard time finding matches.
Try to remove your current finger and register it again but this time register the sides of the finger first, try to cover all 360 degrees of your thumb, you have plenty of trials to cover all the finger.
I also had a problem, where i registered a fingerprint before i installed a glass screen protector, that made the fingerprint very slow, removing and registering the finger with the glass on did the job.
Click to expand...
Click to collapse
i have done this , i also done to add the same finger 2 times ... before i had an mi6 and it is 10 times faster. note is slow very slow. i don't maybe sensor is fine and the processor makes it slow cause is a mid range processor. Mi 10 lite which has better processor is also faster than note
You cant compare physical fingerprint sensor with an in display one. As far as in display fingerprints go, speed on mi note 10 lite is completely adequite, not very fast but not very slow either. Every review i have watched had no complaints about it. I think your expectations are wrong.
Coming from ASUS and Mi Max 3, it's indeed slower. But likely because of in-screen fingerprint scanner.
JoraForever said:
I don't think that the fingerprint sensor is slow, i think the problem is that you didn't register properly the fingerprint, and the sensor is having a hard time finding matches.
Try to remove your current finger and register it again but this time register the sides of the finger first, try to cover all 360 degrees of your thumb, you have plenty of trials to cover all the finger.
I also had a problem, where i registered a fingerprint before i installed a glass screen protector, that made the fingerprint very slow, removing and registering the finger with the glass on did the job.
Click to expand...
Click to collapse
RAMBO29 said:
Coming from ASUS and Mi Max 3, it's indeed slower. But likely because of in-screen fingerprint scanner.
Click to expand...
Click to collapse
also mi 10 lite have fingerprin in-screen but is much faster .. processor ok is better but is not snap 8 series ...
hope they fix it in miui 12
I think the problem is when have AOD enabled
prekasg said:
also mi 10 lite have fingerprin in-screen but is much faster .. processor ok is better but is not snap 8 series ...
hope they fix it in miui 12
I think the problem is when have AOD enabled
Click to expand...
Click to collapse
Mi 10 lite fingerprint is not much faster. Its a little faster. And yes, that might be because of soc
jamax80 said:
Hi, after update to xiaomi EU 11.0.8 from 11.0.1 vodafone, the finger printer is more more fast and read nothing error. I used to have trouble reading the print of any finger. Things have improved a lot now.
Inviato dal mio Mi Note 10 Lite utilizzando Tapatalk
Click to expand...
Click to collapse
You can get the same results recalibrating the sensor
Huge increase of speed and accuracy
Changing defoult fingerprint animation improves hugely speed and accuracy.
toha8 said:
Changing defoult fingerprint animation improves hugely speed and accuracy.
Click to expand...
Click to collapse
the problem is the fingerprint at AOD ... it is really slow , on apps unlock works ok
i try this to change default animation, i don't know . i looks faster but i m not sure yet
toha8 said:
Changing defoult fingerprint animation improves hugely speed and accuracy.
Click to expand...
Click to collapse
yes, it accelerated.ty.but it still needs to be better.
Related
Hi,
I am currently looking to buy Honor 10, however, after reading some reviews and comments on the internet regarding the slowness and unresponsiveness of the fp scanner, I am really hesitant to.
May I know opinions on anyone already using the Honor 10 regarding the fp speed/reliability compared to iphone 7, oneplus 5 etc.?
it's bad compared to regular FP in other Huawei models, when it works it's fine, but it doesn't work always, though face unlock in good lightning conditions it's superfast, not very usable in dark (obviously)
though compared to other brands even this is still decent FP
PeterMarkoff said:
it's bad compared to regular FP in other Huawei models, when it works it's fine, but it doesn't work always, though face unlock in good lightning conditions it's superfast, not very usable in dark (obviously)
though compared to other brands even this is still decent FP
Click to expand...
Click to collapse
Can you have a comparison with other brands as well, for example iphone 6s, samsung s7, oneplus 3 etc.
No problem after the first update.
And it's important how the fingerprint is registered.
One finger is recognized everytime on first try. An other finger ist working in 90% of the time.
I came from a Honor 8, and this brand new Honor 10 is a BIG Disappointment. Doesn't work fast, sometimes only recognize the fingerprint at the 3rd or 4th try...
Actually it's horrible... It takes severel times to detect the finger print (can compare to my Mate 8 and the Honor 6x).
But the face unlock is surprisingly good, even in low light and if you not hold your phone perpendicular to your face
The fingerprint reader is embarrassingly bad and I really hope they can improve it with a firmware update.
Thankfully, as mentioned, face unlock works really well.
it's really a shame then would have been perfect if they just used the normal fingerprint technology. I'm still holding out of buying it until I can try it in shop but they don't have stock for demo yet.
Same experience here - FP reader is slow and inconsistent, however face unlock works so well that I just use this and am very happy with it.
It's a different type of fingerprint scanner on the Honor 10. Its under the bezzel of the display and works with pressure. A slightly unfair comparison to other flagships here. In my opinion the fingerprint scanner placement isn't useful. Face unlock is faster.
I agree what other said. The fingerprint sensor just isn't as responsive as other conventional fingerprint sensors. I guess that is the trade off on some usability for style (under-glass sensor). There is no lowered platform in this phone. And no fingerprint sensor at the back ties in nicely with the cool phantom colors of the back cover.
Face unlock is faster but less secure as it is not true 3d face unlock technology like Iphone X or the Mi 8. I personally still go with fingerprint instead of face unlock.
I find the fingerprint sensor to be pretty fast although you do have to have to put pressure on it. What is more disappointing is when you want to use it for off screen navigation swiping it from left to right or right to left is supposed to bring up recent tasks but it only works about 50% of the time. I have put the on screen navigation back but it's a shame because it uses up screen space.
Fp is lame!! Use face unlock lmao
yeh989 said:
I find the fingerprint sensor to be pretty fast although you do have to have to put pressure on it. What is more disappointing is when you want to use it for off screen navigation swiping it from left to right or right to left is supposed to bring up recent tasks but it only works about 50% of the time. I have put the on screen navigation back but it's a shame because it uses up screen space.
Click to expand...
Click to collapse
I agree. The unresponsive fingerprint for navigation even after the update is what makes me want to return the Honor 10 and get the P20. I want to use the off-screen navigation but same experience, it's unresponsive and works only half the time. P20 doesn't have this problem whatsoever.
They wanted full underscreen scanner.
Drawbacks. As everyone have noticed, ridiculous sensitivity issue.
Kinda hoped they just use back normal scanner, although it would feel different than glass, it functions better.
Mine works pretty well, i have no problems with unlocking or navigation. The only problem is the recent apps gesture, because of the screen protector it dosent work all the time from the first try.
Bought this phone last week...yeah it's a little bit slower than other flagship phones but i never had a problem with my fp recognition, it always works pretty good and doesn't need that much pressure. Though i have to admit i prefer the face unlock, it's faster, more convenient and i can use it while driving.
Garkan said:
Mine works pretty well, i have no problems with unlocking or navigation. The only problem is the recent apps gesture, because of the screen protector it dosent work all the time from the first try.
Click to expand...
Click to collapse
True, unlocking and navigation works fine. Same with me that recent apps gesture works only 50% of the time and that's a bit frustrating to me :/
I dont want to remove the screen protector, i bet it will work flawless after. We have to swipe full FP and the protector kinda prevents us to do that.
As almost evryone said it's not the fastest on earth but it kinda works and do the job, even if sometimes I have to try 3 times before unlocking.
I first tried the face unlock but sometimes I just want to take a look at the notifications without unlocking my phone so I de-activated it and the more i am using the FP the better it seems to work (or maybe I'm just getting used to it). Also I use the FP to navigate in the UI and love it for the moment even if the recent apps is sometimes hard to get.
Mate 20 Pro use the first or second generation?
I have seen the OP6t and the fingerprint is faster. One Plus says that Mate 20 Pro use the first generation. Is it true?
Not sure abt the gen... But dont listen to op..mate 20 pro have superior fingerprint and definitely more accurate...
I'll agree here. Mine has been flawless. But rarely get the opportunity to use it as my face unlock kicks in as soon as I look at the darned thing. Lol
I will add my weight to the fact that the fingerprint is faster and more accurate than the 6t. Although the face ID is so quick and accurate I rarely use the fingerprint lol
Jonathan-H said:
I will add my weight to the fact that the fingerprint is faster and more accurate than the 6t. Although the face ID is so quick and accurate I rarely use the fingerprint lol
Click to expand...
Click to collapse
Has anyone else had problems getting the fingerprint scanner to even get your fingerprint setup ?. Plus with the screen protector on, it pretty much sucks .. Face ID all the way with me ..
Supertrooper said:
Has anyone else had problems getting the fingerprint scanner to even get your fingerprint setup ?. Plus with the screen protector on, it pretty much sucks .. Face ID all the way with me ..
Click to expand...
Click to collapse
since fitting a screen protector the fingerprint sensor has been un-usable for me. does anyone know a screen protector it works well with?
Sunday night updated to the Jan security update on the Pixel 6. Prior to that, the finger print reader was working (but barely). I got distracted and forgot to check how the fingerprint recognition was working. The next day, forgot completely about the update and installed the Whitestone dome protector (which went mostly good but I've got three small bubbles, but that's another story).
After installing the dome, they recommend retraining the reader. However, even after training with multiple fingers, the reader, very, very rarely works probably less than 1% of the time if even that. Any ideas what I could try to improve the accuracy? The January update seems to have improved accuracy for most people. I just wish I had tested out the January update more thoroughly before adding the screen protector.
I bought the Dome glass,too. After replace it with the old glass protection the fingerprint was worse than before.
I trained the new, but not better.
What helped for me was to train the FPS again with more pressure of the finger on the FPS. Now it's working almost like the old protection.
Seosam said:
I bought the Dome glass,too. After replace it with the old glass protection the fingerprint was worse than before.
I trained the new, but not better.
What helped for me was to train the FPS again with more pressure of the finger on the FPS. Now it's working almost like the old protection.
Click to expand...
Click to collapse
Do you have to apply more pressure when logging in also or just for the training?
mrlad said:
Do you have to apply more pressure when logging in also or just for the training?
Click to expand...
Click to collapse
Just for the training.
Did you enable 'increase touch sensitivity'?
chaimav said:
Did you enable 'increase touch sensitivity'?
Click to expand...
Click to collapse
No, I never activated it...
I just installed the Whitestone Dome yesterday. My fingerprint seemed to work the same but I went ahead and did a retrain. I think it is still close to without it (WD) except for 1 finger. I had an issue with that same finger on my old OP6T. Good Luck.
I also installed yesterday Whitestone Dome, the fingerprint reader works just like before almost every time. I never had any problems with the FPR, it only failed when I lifted the thumb to early. I did not retrain my thumb, increased Touch sensivity is still disabled. I don't know if it matters, but 4 finger profiles are my thumb.
Seosam said:
No, I never activated it...
Click to expand...
Click to collapse
Try enabling it. It's a toggle switch under Settings > Display.
chaimav said:
Did you enable 'increase touch sensitivity'?
Click to expand...
Click to collapse
Yes, I did enable the 'increase touch sensitivity' but that hasn't helped.
IdroogI said:
I also installed yesterday Whitestone Dome, the fingerprint reader works just like before almost every time. I never had any problems with the FPR, it only failed when I lifted the thumb to early. I did not retrain my thumb, increased Touch sensivity is still disabled. I don't know if it matters, but 4 finger profiles are my thumb.
Click to expand...
Click to collapse
I tried doing 4 finger profiles of the thumb but that didn't help either.
Does anyone one know if training indoors, does lighting impact the accuracy of recognition?
I did a quick search and found these other threads on the P6 finger print issue.
There are few more if anyone wants to do a little research.
Pixel 6 fingerprint sensor calibration
Hi, I had to replace my pixel 6 display and the fingerprint sensor with it. When I went on to calibrate the sensor with Google's calibration software, it says "Couldn't find the unique calibration software for this device" after trying to...
forum.xda-developers.com
EDITED: December update - screen protectors still interfere with the fingerprint reader
Note: I have edited the subject line to reflect the latest data I have. See post #3 below. It appears that the Tocol screen protector, which many reviews said does not interfere with the fingerprint reader, is the actual culprit...
forum.xda-developers.com
Fingerprint + Screen protector
I know that i'm many out of thousands but i can't find anything related to my problem, so i got a pixel 6 and i just got a screenprotector from tauri, fingerprint worked fine before untill i placed the screen protector. i just enrolled my...
forum.xda-developers.com
Is there a tempered glass screen protector that works with the finger print scanner?
Anyone have any luck with getting a tempered glass screen protector that works with the fingerprint scanner? I have read several threads about this. Some suggest adding same finger twice. Some suggest increasing sensitivity of the screen, and...
forum.xda-developers.com
The best tip for getting it work I have seen is to use hand lotion. It really struggles with dry skin
Hi all,
As many other Pixel 6 users I was struggling with FP sensor in inconsistency - failed unlocks mostly. I did worked a bit better without screen protector, but my personal experience tells me I need one, so the struggle continued.
Today I've made yet another attempt to re-scan my finger hoping to improve the experience and then I've noticed that the sensor seems to work way better if I place my finger 2-3 mm below what I would call centered over the icon on the screen.
No I wonder - is is just me + wishful thinking or maybe there is slight misaligned between the icon on the screen an actual position of the scanner. Any thoughts?
a.
Weirdly, it works on the bottom half of the FPS scanner icon, and not the top one, so it might be that the sensor is a little bellow the indicator
So it's not just me and my pixel. Nice
You should have posted in reddit instead
You might be right, but I don't use Reddit. Hope whoever might want to try this he would eventually find this thread.
It works well for me, you need to install certified only screen proyectors
Agreed, the FP issue is negligible without screen protector, it a slow yet solid scanner.
I've checked Google's list of certified screen protectors and pretty much all of these get some negative reviews from users. Not to mention all either not available or out of stock in EU.
Currently I'm using Spigen glass, not on the Google's list, but works fairly well.
As I wrote in my first post moving the finger slightly lower on the screen seems to help a lot.
Interesting observation about finger placement and sensor alignment. I'll definitely experiment with that.
I was cussing the fingerprint sensor up until March. It couldn't even enroll let alone unlock. Long, tedious story shortened... Since March after clean flashing the factory image the sensor improved a lot along with solving other screen related problems. My best enrollment results were with warm and clammy fingers from gripping a mug of hot coffee. As it is now only one finger out of four consistently unlocks, but that could just be me. Or placement. With that one finger I'm getting acceptable results with a cheap 9H screen protector (3-pack for $9) and default screen sensitivity. A screen protector 1-pack in the $25-40 range aint gonna happen.
ender2180 said:
Agreed, the FP issue is negligible without screen protector, it a slow yet solid scanner.
I've checked Google's list of certified screen protectors and pretty much all of these get some negative reviews from users. Not to mention all either not available or out of stock in EU.
Currently I'm using Spigen glass, not on the Google's list, but works fairly well.
As I wrote in my first post moving the finger slightly lower on the screen seems to help a lot.
Click to expand...
Click to collapse
I'm using my P6 without screen protector, and it is very slow and inaccurate for me. For reference, I'm coming from S21 and it's instantaneous and very precise.
What did it for me was that i ignored the instructions completely and did my own routine. for example, i never rolled my finger over the screen. instead i did both sides of the fingerprint just pressing multiple times and on slightly different angles.
Hamid Chikh said:
I'm using my P6 without screen protector, and it is very slow and inaccurate for me. For reference, I'm coming from S21 and it's instantaneous and very precise.
Click to expand...
Click to collapse
Different sensor tech
DMart9406 said:
Different sensor tech
Click to expand...
Click to collapse
I know it's a different technology, but it's been around for a while now, since S10 (2019) and it only got better with time, so i can't figure out how and why did google skip it for its supposed "the google phone flagship"
Hamid Chikh said:
I know it's a different technology, but it's been around for a while now, since S10 (2019) and it only got better with time, so i can't figure out how and why did google skip it for its supposed "the google phone flagship"
Click to expand...
Click to collapse
I agree, it is a bummer. For last few years I was mostly using IOS and got used to authentication being seamless. My last Android was Pixel 2 and I admit - I've missed the experience. FP sensor is giving me some hard time, but I'm super happy with my P6. It will stay with me for longer no doubt.
I did some more testing, retraining etc. and I feel my initial thoughts are not accurate. The reason why I believed the scanner is positioned slightly below the icon on the screen was most probably due to the part of my finger that got scanned the best.
It might be due to the security reasons Google mentioned on the blog, it might also be a smaller and less accurate scanner used in P6/P6P. The outcome stays the same - you need to be very precise while registering your finger print and train your muscle memory to place your finger accurately on the screen.
The scanner on the back of the phone like to the one in Pixel 5 is not only using different tech, but it also makes obvious to a user where to put the finger. Pixel 6 makes it a bit harder, but that's about it.
With a deliberate finger positioning and some practice you can be pretty happy with FP scanner on Pixel 6.
Hi. I got a solution from this xda forum (sorry I don't have the link) but it basically resolved my fingerprint hit-miss issue. Ideally it involved:
1. Remove all the fingerprint images 8 previously made and starting afresh.
2. After removing, before registering new finger prints, first rub the thumb / finger I wanted to register on my forehead so that it collects a good amount of face-oil. Apparently the fingerprint registers well when registering the finger with an oily finger (I refer to the face oil...I have no evidence that other oils work).
3. After a good rub of the finger on your face you now go about registering the finger(s). Suggestion is to register each finger at least 2 times.
When you try using the fingerprint scanner it will work well. You may have to press in a bit (not so much) but this works pretty well.
Hi all,
I've noticed that a lot of times I get a "face doesn't match" message even in very good lighting conditions where I'd usually have no issues.
I tried turning the screen off and then on again to scan my face in the same position, and it can display "face doesn't match" 2-3 times in a row before being successful.
I noticed that I need to use my fingerprint much more than on my previous device, before my face wasn't registered only in very dark situations, and now even during the day it displays this message a lot.
Did anyone else experience this?
yes, +1
i initially blamed the whitestone dome glass protection, then energy ring app; but no, I guess the front camera is the culprit, poorer quality or poorer settings
I jave exactly same problem my old xiaomi 10 pro have better face unlock and faster than 23 ultra i hope i fix comming soon
Yes here also same problem. Face Recolonization is not at par with Apple iPhone.
Keos214 said:
I jave exactly same problem my old xiaomi 10 pro have better face unlock and faster than 23 ultra i hope i fix comming soon
Click to expand...
Click to collapse
Can confirm, the Xiaomi Mi 10 Pro is really fast and good with face unlock, Samsung has sucked with this for years, that's pretty much the only gripe I have with Samsung, their unreliable Face Unlock.
MasterThiefGarrett said:
Can confirm, the Xiaomi Mi 10 Pro is really fast and good with face unlock, Samsung has sucked with this for years, that's pretty much the only gripe I have with Samsung, their unreliable Face Unlock.
Click to expand...
Click to collapse
Yes and with xiaomi 10 pro we dont need to puth the face front of camera you can easy unlock even if you are far from camera i dont understand why samsung not work well
Working fast and without any issues for me even at arms length. Try redoing face recognition in clear day light or with lights on, moving your face very slightly for different angles up down left right and then add the alternative one too.
I have try multiple time no succes even with friend face, same problem the device cant reconize
I use pin code no choice
Keos214 said:
I have try multiple time no succes even with friend face, same problem the device cant reconize
I use pin code no choice
Click to expand...
Click to collapse
Is your front camera covered by screen protector, glass, film, dirt, fingerprints, or scratched? Are you able to take clear perfect selfies and videos?
Why pin instead of fingerprint?
Yes the device is brand new 12 days and my protection is cuted around the camera front
Keos214 said:
Yes the device is brand new 12 days and my protection is cuted around the camera front
Click to expand...
Click to collapse
Do you have a face?
Strange. It works perfectly and instantly for me.
Have you tried setting it up different distances from your face too? Bright light? Day light?
I have tried all of the above suggestions, even before posting this thread. I also have alternative look added in the daylight. Since I used s21u before this one, I can definitelly say that there's something off about the face recognition on this device. I guess it's a software bug. With all the same settings it was working amazing on my s21u, even from an angle, in darker environments.
I'd suggest that we report this on samsung members app.
MrDusan said:
I have tried all of the above suggestions, even before posting this thread. I also have alternative look added in the daylight. Since I used s21u before this one, I can definitelly say that there's something off about the face recognition on this device. I guess it's a software bug. With all the same settings it was working amazing on my s21u, even from an angle, in darker environments.
I'd suggest that we report this on samsung members app.
Click to expand...
Click to collapse
Yep report please. It may be a software bug or glitch which they should know about so they can fix it.
I can't fault mine so there is definitely a difference in experience.
Same here, seems like the issue for Samsung to fix in the following updates.
gmadjara said:
Same here, seems like the issue for Samsung to fix in the following updates.
Click to expand...
Click to collapse
Please also report on samsung members.