You're smartphone its continually rebooting to fastboot mode because you wipe system partition or
You're system currapted for fix it flash vbmeta file using fastboot command
fastboot flash vbmeta vbmeta.img
If the above is successful, remove the cell phone from the PC, push the power button for a long time until the notification appears immediately just press the volume and the option will appear later, select recovery to enter twrp. If you successfully enter twrp, please install stockrom / flash GSI
Vbmeta file will found in ...
@x01adhelp
Related
I have an Atrix 4G ATT. During RSD it failed and sent me to a screen with
"SVF:105:1:2
Failed to boot 0x1000
no os detected, going to rsd mode in 5 seconds
press a key to stop count down
available modes are:
1:rsd
2:flashboot
..."
What caused this was while following http://forum.xda-developers.com/showthread.php?t=1302423, the rsd said failed, i waited till 100% like guide said, and then got this screen.
What can i do to fix this, from each forum i read, i don't understand, or follow old links. I am a noob.
edit: When i Choose fast boot nothing happens, when i check other forums, they have megaupload links (shut down). am i missing something?
I don't know it'll fix the thing or not But you should try this method. It may work.
Skip any steps you have already done.
A. Download a fruitcake from here. http://forum.xda-developers.com/showthread.php?t=1163009
B. Download a radio from that same thread, below the fruitcakes. Or if you prefer, download a different radio.
C. Put them both on your external (or internal if you really want to) SD card.
D. If you haven't, download RomRacer's recovery. Here. http://forum.xda-developers.com/showthread.php?t=1204500
E. Reboot into fastboot mode by holding volume down + power button until Fastboot appears on screen, then hit the Up arrow. This takes you into fastboot mode, I'm assuming you already have fastboot installed. If not, google how to set up fastboot or download moto-fastboot.
F. Make sure the recovery you downloaded above is in the same folder you downloaded fastboot or moto-fastboot to.
G. Connect phone to computer, open command prompt, navigate to fastboot or moto-fastboot folder (cd c:/(where you installed fastboot / moto-fastboot)
H. Type these in, after entering each one hit enter: Fastboot erase system fastboot erase userdata fastboot erase cache
fastboot erase webtop fastboot erase preinstall fastboot erase boot fastboot erase recovery
I. Type Fastboot flash recovery (name of your romracer recovery image)
J. Type fastboot reboot and when it reboots, hold down volume + power then keep hitting down when fastboot appears till you see android recovery, then hit the volume up key.
K. Enter recovery,erase Dalvik Cache under Advanced setting, then flash the new ROM you downloaded. * the fruitcake*. Let it completely do its thing.
L. Now if you've gotten this far, you're on a good path and most likely you wont have to flash the radio you downloaded. If not, you may have to. If none of this matters and after completely erasing all that stuff in fastboot mode you STILL get the same error on boot up I would have to assume it's an actual hardware problem and you will have to get a new phone.
hi
i tried to update to stock android 7 via (fastboot flash boot boot.img fastboot flash system system.img_sparsechunk.0 ...) but after fastboot reboot my phone didnt power on and i cant power it on what should i do?
ok
i have red magic 3s phone and tried to install the globe rom on it
after installation my phone is stack in the fastboot mode
if i tried to reboot it. it send me back to fastboot mode
if i tried to reboot to recovery mode it send me back to fastboot mode
if i used the hot key (power button + volume up) it send me back to fastboot mode
i tried to flash twrp recovery so that i can enter recovery mode did not work
than i download the chinese rom and flash all these files
-fastboot oem nubia_unlock NUBIA_NX629J
-fastboot flash boot boot.img
-fastboot flash dtbo dtbo.img
-fastboot flash parameter parameter.img
-fastboot flash recovery recovery.img
-fastboot flash splash splash.img
-fastboot flash vbmeta vbmeta.img
-fastboot flash modem NON-HLOS.bin
-fastboot flash dsp dspso.bin
-fastboot reboot
but it still the same
please if any one know the solution help me :crying::crying::crying:
HI guys my phone is stuck on fastboot,
its showing the current image(boot/recovery) have been destroyed and can not boot
pressing volume + power put it into fastboot and it shows in adb "fastboot devices" i tried to install custom recovery with "fastboot boot recovery.img" and its not working picture attached and i tried to boot img but same error shows FAILD(remote: unknow command)
use command fastboot flash recovery recovery.img
before installing rom please check vendor inbuilt or not so that after flashing u will be stuck in boot again
Instructions for installing GSI firmware based on Android 10/11 for OnePlus Nord N100.
1. We flash the stock firmware of OxygenOS 10.5.5 through the EDL mode using MSMDownload.
2. After launching the newly installed system, go to Settings-About the phone, click on the Build Number several times until it is indicated that you have become a Developer.
Go to the System section, the item For Developers, activate the Factory Unlock slider and Reboot Options, and also activate USB Debugging.
3. Restart the smartphone in Fastboot by holding down the power button and selecting the Loader item. We connect it to the PC. On a PC, open the command line from the folder with adb tools and firmware in .img format. Enter the command: fastboot flashing unlock_critical (all data will be deleted). We wait for the end of the procedure, reboots again in Fastboot, and enter the following command: fastboot -w. Next, the command: fastboot reboot fastboot. The smartphone will reboot into Fastbootd mode, in which we will perform all further actions.
4. Enter the command: fastboot erase system. We remember which partition was cleared, system_a or system_b (this is important!).
The next command we need to execute is: fastboot resize-logical-partition product (_a or _b depends on which system partition was cleared) 709344768.
Next: fastboot resize-logical-partition system (the same as with product) 2600000000.
Next, we flash the system itself. Command: fastboot --disable-verity --disable-verification flash system (depending on which partition was erased, _a or _b, enter the one) "file path".
5. After the firmware is finished, enter the command: fastboot reboot. The smartphone will boot into the system.
i tried booting into fastbootd mode which it does on the phone but on cmd its stuck saying waiting for device