Hi all,
Today while using my phone, it suddenly got hang, and so i tried to reboot it by firing power button, since then it's stuck on
boot screen.
It's not entering recovery mode.
USB debugging was not enabled.
Tried flashing, however hone is not detected by flashtool.
I have tried everything, Please help me!
Hi,
Tried hard reset ?
Mobile off, press simultaneously and for a long time on the on / off and volume + keys. The mobile vibrates then turns on (Mi screen).
Release the buttons and immediately (for several seconds) press the volume key -. A new screen (Main Menu Mi-Recovery 3.0) appears.
Using the volume key -, select Wipe data and confirm with the on / off key. The mobile displays a new screen.
Validate Wipe All Data. with the on / off button.
The mobile displays Confirm Wipe of All Data this cannot be undone
Using the volume key -, select Confirm and confirm with the on / off key.
The mobile proceeds to erase the data. At the end, a new screen appears (Data wiped Successfully). Press the on / off button.
The Mi-Recovery 3.0 Main Menu screen is displayed, with the on / off key validate Reboot. A new screen appears.
"Tried flashing, however hone is not detected by flashtool."
"I have tried everything, Please help me!"
1. For sure it will not be detected by flash tool, and for sure you didn't tried everything because in order to flash your device you need to put your device into EDL mode known as Emergency Download Mode.
Here is example which point you need to short with wire ot twizzers and plug usb in while you are holding those pins...
https://gsm5g.mobie.in/Mobile/Edl/Redmi_note6_pro_testpoint.jpg
Good luck...
Related
(sorry about my chinglish )
So here's how:I locked my nexus10 and forgot the password, and I do not see the "Forgotten" button on the screen and also I didn't turn USB debugging mode on, so is there any possibility I can save my data instead of cleaning them up? Thank you (btw, I deleted the original recover files(because I once booted Ubuntu Touch on it) how can I reset it anyway?) Tanks a lot
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
eytan123 said:
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
Click to expand...
Click to collapse
yeah........I see, so how can I clean everything, the recovery is dead and I didn't turn the debugging mode on
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
eytan123 said:
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
Click to expand...
Click to collapse
The recovery has been deleted by me when I boot Ubuntu Touch on it
u cant get download mode and flash recovery? debuging must be on to do it? i dont think should be on.
Sent from my GT-I9100
Fastboot
You can use Fastboot without USB Debugging enabled.
"To use fastboot, power off, then hold down the power button and both volume buttons. That will take you to the bootloader screen where you, or the toolkit, can do fastboot commands."
I've attached a CWM Recovery image for your device.
Place it somewhere on your computer and open the Terminal application on your computer. Run the following command:
fastboot flash recovery <image location>
Then you can backup /data using advanced backup, perform a factory reset, CREATE A FULL BACKUP, then restore /data using advanced restore.
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Snazarian said:
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Click to expand...
Click to collapse
There is no Recovery Mode in the XTZ's stock firmware. Here is how to access the available functions of the stock firmware.
1. Power On
Press and hold the POWER button until notification light flashes once, then release POWER button.
2. Power Off
Press and hold the POWER button until menu appears, then select "Power off" and "OK".
3. Restart
Restart device to turn off all running applications and to free up memory.
3.1. Simultaneously press and hold the VOLUME UP and POWER buttons for 10 seconds.
3.2. After the notification light flashes three times, release the buttons.
3.3. The device will power off automatically.
3.4. After the device is powered off, power on the device.
4. Reset
Reset device to its original settings to free up memory.
Don't forget to back up any important data saved on the device!
4.1. Go to Settings > Backup & reset > Factory data reset > Reset tablet.
5. Enable Safe Mode
5.1. Power off the device.
5.2. Press and hold the POWER button until the notification light flashes once.
5.3. Wait until the Xperia™ logotype disappears.
5.4. Press and hold the VOLUME DOWN button.
5.5. The device will restart in Safe Mode.
5.6. To exit Safe Mode, restart the device.
6. Flash Mode
6.1. Power off the device.
6.2. Connect a USB cable to the device.
6.3. Press and hold the VOLUME DOWN button.
6.4. Connect the USB cable to a computer.
6.5. Wait until the notification light flashes red-green once, then release VOLUME DOWN button.
6.6. To exit Flash Mode, disconnect the USB cable.
7. Fastboot Mode.
7.1. Power off the device.
7.2. Connect a USB cable to the device.
7.3. Press and hold the VOLUME UP button.
7.4. Connect the USB cable to a computer.
7.5. Wait until the notification light flashes red then solid blue, then release VOLUME UP button.
7.6. To exit Fastboot Mode, disconnect the USB cable.
8. Service Menu
8.1. Start the Contacts app.
8.2. Go into Settings.
8.3. Touch the blank area at middle bottom of screen for at least five seconds then stop touching screen.
8.4. "Enter service mode" button will be displayed.
8.5. Press the "Enter service mode" button.
8.6. Enter *#*#7378423#*#* (*#*#SERVICE#*#*).
8.7. Service menu will be displayed.
8.Notes.1. Enter *#*#4636#*#* (*#*#INFO#*#*) to display testing information.
8.Notes.2. Enter *#*#73556673#*#* (*#*#SELLMORE#*#*) to toggle Demo Mode activation on/off. WARNING! Activating Demo Mode will delete all personal content (photos, etc.) and settings.
How do you flash CM then ?
Cat McGowan said:
There is no Recovery Mode in the XTZ's stock firmware.
Click to expand...
Click to collapse
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
ducasse.isidore said:
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
Click to expand...
Click to collapse
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Felimenta97 said:
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I finally found a solution to my problem : I unlocked the device using flashtool-0.9.11's gui procedure, instead of flashtool's fastboot. It succeeded and I can successfully flash anything I want on the device.
I found your rational approach to my problem useful. It helped me isolate a solution. Thanks !
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Press and hold the Power and Volume Down keys for 10 seconds.
The device will reset and restart.
Hello,
My xt916 bricked for no reason. It is not rooted. Do not respond to any commands such power, power + volume down, power + volume up. The only sign of life is when connected to charger or USB the back home and menu buttons on the bottom light in white.
Searching for solutions I tried to flash stock again with MTK-RSD Lite ver 6.1.6. Used rom XT916_2_26D_2014_A02_MP.mzf
The device appears as connected and enters download mode. The process completes and it shows PASS at the end.
However no sign of life afterwards. Same as before.
Tried to enter recovery mode or fastboot via ADB but when I type adb devices nothing is shown.
beniciof98 said:
Hello,
My xt916 bricked for no reason. It is not rooted. Do not respond to any commands such power, power + volume down, power + volume up. The only sign of life is when connected to charger or USB the back home and menu buttons on the bottom light in white.
Searching for solutions I tried to flash stock again with MTK-RSD Lite ver 6.1.6. Used rom XT916_2_26D_2014_A02_MP.mzf
The device appears as connected and enters download mode. The process completes and it shows PASS at the end.
However no sign of life afterwards. Same as before.
Tried to enter recovery mode or fastboot via ADB but when I type adb devices nothing is shown.
Click to expand...
Click to collapse
Follow these instructions to perform a factory reset on the Razr and Razr D1 D3:
*
With the phone off, remove your SIM card, then press the power button for 1 second while pressing the volume button up
Select the recovery mode by pressing the volume key down until the factory mode (Factory) and press the power button
Wait for the Android appears and press the volume up
Scroll to wipe data / factory reset (wipe data / Factory reset) and press the power button
Scroll to the option Yes - Delete all data (Yes, delete all user data) and press the power button
Select Reboot System Now (Reboot system now) by pressing the power button
Remind client will lose all data stored in the internal memory.
https://motorola-global-es-latam.cu.../prod_answer_detail/a_id/93717/p/30,6720,8632
Sent from my KFFOWI using Tapatalk
sd_shadow said:
Follow these instructions to perform a factory reset on the Razr and Razr D1 D3:
*
With the phone off, remove your SIM card, then press the power button for 1 second while pressing the volume button up
Select the recovery mode by pressing the volume key down until the factory mode (Factory) and press the power button
Wait for the Android appears and press the volume up
Scroll to wipe data / factory reset (wipe data / Factory reset) and press the power button
Scroll to the option Yes - Delete all data (Yes, delete all user data) and press the power button
Select Reboot System Now (Reboot system now) by pressing the power button
Remind client will lose all data stored in the internal memory.
*** edit link removed *****
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
Thanks for the tip. Already tried this. The phone only lights up when connected by USB or charger. Whether is connected or disconnected (with battery only) it does not respond at all to any key combinations.
The only noticeable thing it is when connected by USB with RSD Lite software when I try power volume down the phone enters download mode and I can flash a rom.
beniciof98 said:
Thanks for the tip. Already tried this. The phone only lights up when connected by USB or charger. Whether is connected or disconnected (with battery only) it does not respond at all to any key combinations.
The only noticeable thing it is when connected by USB with RSD Lite software when I try power volume down the phone enters download mode and I can flash a rom.
Click to expand...
Click to collapse
try house of moto
Moto Drivers, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
thanks. gonna give it a shot. I figure out it would not be a very simple solution since I've tried many other solutions until get here.
I installed the new update and it installed it and it booted up and it was stuck on my carrier's screen
I hardbooted it and now it's stuck on the lg screen.
Help me please
N33dhelp said:
I installed the new update and it installed it and it booted up and it was stuck on my carrier's screen
I hardbooted it and now it's stuck on the lg screen.
Help me please
Click to expand...
Click to collapse
Hello, N33dhelp.
Have you tried using the phone's current factory reset (will destroy all data on the phone; Pictures, programs, files, etc)?
You can initiate it with the phone itself. Press and hold the VOLUME DOWN key and POWER key. When the boot-up logo appears: Temporarily release the POWER key and re-press and hold it (do not release VOLUME DOWN key).
The "FACTORY RESET" screen should appear shortly (the phone should NOT reboot; If it does: It did not work). You can release all keys.
The volume keys select menu items. The power button becomes an 'OK' or 'SELECT' button for what is highlighted (selected).
I just wrote this short guide on using LG UP to flash your phone to a factory reset state (using your PC).
If you're unable to factory-reset your device: You could consider flashing the phone: https://forum.xda-developers.com/lg-k7/how-to/guide-factory-stock-flash-t3722424
I hope this helps!
Hi,
this morning I was struggling with this smartphone because of the lack of primary services in the device (e.g. calls, contacts, sms).
I thought about a bug in the OS or...I don't know. So, after trying the easiest things (download some app, disable/install or install other one etc), I decided to factory reset the phone. I searched for instruction on the internet and I found this procedure: power off the device, enter in recovery mode pressing power button + volume up, wipe data to factory reset.
In fact I think I pressed volume down and a screen with android symbol and no option appeared. So, I hold power button to quite this mode and reboot the system, but now the home screen is empty and any functionality disappeared (the phone is unusable).
If now I correctly enter the recovery mode pressing power button + volume up and run "factory reset" the process starts and after a few seconds it crashes and tell me that it can't recovery the system.
So, if I simply boot the system the home screen is empty and I can't use any app or function. And neither I can recovery the system to factory reset.
Pleas help.
mod edit - issue marked as solved by the user
thread closed
Closed at OP's request