Remove "External USB storage ready"+icon+notification+click "Cancel"
Hello
Device: Android 7.0
Please, make addon
If I connected USB OTG adapter with insert on USB OTG adapter USB Flash Drive, i see window "External USB storage ready" and text "Do you want to change the default write disk?"
Please
1) remove window
2) click Cancel in window
3) remove icon (in left corner)
4) remove message (Android System) on notification
Thank You!
SharkyEXE said:
Hello
Device: Android 7.0
Please, make addon
If I connected USB OTG adapter with insert on USB OTG adapter USB Flash Drive, i see window "External USB storage ready" and text "Do you want to change the default write disk?"
Please
1) remove window
2) click Cancel in window
3) remove icon (in left corner)
4) remove message (Android System) on notification
Thank You!
Click to expand...
Click to collapse
Well what you're asking for is hell of difficult. Even if those were "hidden", it would cause trouble because they will still require an action.
An add-on won't be enough, you're asking to rework the whole Android system just to remove that feature and all the dependencies that goes with it. I don't think it will happen. Unless some dev as angry as you with that feature created and maintain up to now a ROM where that feature is gone, you won't find any dev to do that.
And even if it's annoying, it's a security feature. USB sticks if mounted right away can sometimes inject malicious code. This prevent the USB device connect to your phone from getting access to your phone without your permission.
Plus that's a historical feature of Android, that notification existed as far as I can remember (Android Eclair 2.0).
In short, if a miraculous add-on don't exists yet, I don't think it will exists someday.
Have a good day tho
Raiz
Hello
If i connected USB cable to computer - i use xposed module, message not see
I have xposed module to hide message
SharkyEXE said:
Raiz
Hello
If i connected USB cable to computer - i use xposed module, message not see
I have xposed module to hide message
Click to expand...
Click to collapse
Wow I didn't know about that, thx for sharing
And I found this pretty interesting thread : https://forum.xda-developers.com/xposed/request-automate-dialogs-module-ios-t3443591/
Raiz
Hello
Hide message and icon and notification, when connected USB to computer - yes xpode module
Why not xposed module, when USB OTG connected to telephone?
May be you do not make xposed module, and not this module do not make?
Related
Is there any way to get the phone to automatically detect usb plugged in as drives on my pc, seen quite a few automount apps in market, but they all seem to either need rooted phone or only mount the sd card, and not mount inbuilt storage. Any ideas folks, as having to go into settings, network setting and usb settings is a royal pain each time I want to put anything on the phone.
Kies doesn't work at all, says need MTP drivers which I've tried reinstalling to no effect(I digress -this is a separate issue) .
Thanks in advance for any help provided peeps.
Erhm, when you plug your phone into your PC, you just drag down your status bar and select 'connect to pc'. No need to go into settings you know.
Settings => Applications => Development => USB debuggin [X]
enable that, connect USB, then this:
prodygee said:
Erhm, when you plug your phone into your PC, you just drag down your status bar and select 'connect to pc'. No need to go into settings you know.
Click to expand...
Click to collapse
prodygee said:
Erhm, when you plug your phone into your PC, you just drag down your status bar and select 'connect to pc'. No need to go into settings you know.
Click to expand...
Click to collapse
+1
how hard is it to press a button?
ah, much quicker, cheers folks, needed to enable debugging to get the option.
When I remove my flash pen from P7500 is says smth. like "USB device removed unexpectedly".
Is there any specific procedure to remove an USB connecred device from P7500?
armanys said:
When I remove my flash pen from P7500 is says smth. like "USB device removed unexpectedly".
Is there any specific procedure to remove an USB connecred device from P7500?
Click to expand...
Click to collapse
hi,
in my case , 10.1 , with stock rom 3.1...tw ..etc
,if you look at bottom bar you will notice an usb icon ?
if i tap on either icon ,the "usb device connected "message appears ,tap it and after second or 3 ,a notice says" usb device safely remove "!
(if you don't do it this way and take usb off , i noticed it says" USB device removed unexpectedly"
or/
either, i tap bottom right hand corner and notification menu appears and then tap on "usb device connected" notice etc .
nb ..your "Notifications " has to be enabled ( next to wifi,notifications gps etc..)
is this the same in your case ?
good luck
If you have not been able to get your RAZR to read a flash/pen drive, here's how I did it.
I only got a OTG Host cable about 2 months ago, and only just got it working.
You will need the following:
USB OTG Host cable
USB Y cable (or whatever it's called - at least that's what I used)
A rooted phone (I am using the GSM Razr Maxx XT910 on CM11-nightly)
USB OTG Helper (Play store)
USB Host Controller (Play store)
Script Manager - Smanager (Play store)
Install all apps and extract attached script and copy the file (ThumbDrive.PreMount) onto your phone/sd-card memory.
(Note apps must be granted superuser permissions)
1. Connect your charger to power and connect your phone.
(Before we can begin, we must first find where the drive is. Open USB Host Controller, and under settings make "Dmesg display mode" continuous". Under the USB tab, look at the log at the bottom and you should see something about the device being rejected due to insufficient power or something like that. Mine is 3-1, your's will probably also be, but if it's not 3-1, you will need to change the script accordingly with a text editor.)
2. USB OTG Helper may give you a popup, just click cancel.
3. Now in Smanager, run the script you copied onto your phone. You must run it as a script, and give it SU permission. Just click the home key after you've run the script.
4.1 Now open USB OTG Helper and click mount.
4.2 You'll probably get an error, but you can ignore this.
5. Your drive should be mounted. Look for it under /storage/UsbOtgDrives/drive_1 (I use Solid Explorer as my file manager and it even added some shortcuts on the left - but not initially though).
You will have to do this everytime you plug a device in, but it's very quick once you know what to do.
I'm just putting this out there because I know it's a function many have not got working. I know there's already a lot of resources on this topic, but frankly they never really helped me. This thread guided me in the right direction though: http://forum.xda-developers.com/showthread.php?t=2050925
Kind regards
Hello all
I got a new Samsung S6 from work. for security reason, I cannot root the device (entrust and other software will not install)
since I got it, I am very annoyed by the fact that every time I connect the phone to my Linux, I have the following message when I want to access the files by MTP
allow access to device media
a MTP connection will be established to access the Data on the connected device : DENY ALLOW
Click to expand...
Click to collapse
is there a way to remember which connection was allowed or to remove once and for all this annoying message ?
thx
Dereut
Hello and welcome to XDA Q&A section of the Forum.
When you connect your phone to your pc, do you get any message in the status bar like "USB used for charging"? If not, go into setting (while connected) and click storage and USB and select MTP.
Hope that helped and hit "thanks" if it did .
thank you for your reply
my problem is not that I cannot connect. I have all the settings correctly done (or so it seems) and I have selected MTP. the issue is that the question to authorize the connection will pop up every time.
the device does not remember the previous authorisations.
example, if i connect to my Linux, then run a virtualbox windows, I have to redirect the USB to the virtualbox, but because it does not remember the authorization, it will disconnect and ask again if I agree, then I will have to redirect to virtualbox as it is seen as a new connection everytime. this in circle
also, I connect and disconnect the device from the USb all the time, everytime, I have to re-authorize the connection, it is getting old
Hi, without root, there is currently no way to automatically authorize a device (kinda stupid really) however with root there are a few ways to do it.
Kyronater said:
Hi, without root, there is currently no way to automatically authorize a device (kinda stupid really) however with root there are a few ways to do it.
Click to expand...
Click to collapse
Tell me more, every time I connect my phone I have to switch from charging to file transfer in cm13.
Hi everyone,
I often transfer files between my Samsung S7 Edge and my Windows PC through USB cable. However, after (making the mistake of) letting it upgrade to Oreo (v8.0), this is no longer possible: connecting the phone via USB to my laptop only shows charging information in the swipe-down top menu, and I no longer get the prompt asking whether I want to allow access to the phone's contents. Consequently, the phone's internal&SD memory no longer shows up under Windows Explorer.
I've been searching for a fix/workaround for hours (thanks Google for this quality time!). Some of the things I've tried that didn't work:
- enable/disable USB debugging mode under developer options
- change "USB configuration" (under Developer Options) to "MTP" and to all other options there
- use a different USB cable and USB port on the laptop
- search for apps on the Play Store that can help with this (didn't find any that actually do the job)
Connecting Android phones to Windows laptops to access their internal memory through USB cable has (bemusingly!) been a problem with this ****ty OS as long as I can remember, so it doesn't surprise me that users are having to spend even more time now to get it to work again.
Any suggestions much appreciated!
longtalker said:
Hi everyone,
I often transfer files between my Samsung S7 Edge and my Windows PC through USB cable. However, after (making the mistake of) letting it upgrade to Oreo (v8.0), this is no longer possible: connecting the phone via USB to my laptop only shows charging information in the swipe-down top menu, and I no longer get the prompt asking whether I want to allow access to the phone's contents. Consequently, the phone's internal&SD memory no longer shows up under Windows Explorer.
I've been searching for a fix/workaround for hours (thanks Google for this quality time!). Some of the things I've tried that didn't work:
- enable/disable USB debugging mode under developer options
- change "USB configuration" (under Developer Options) to "MTP" and to all other options there
- use a different USB cable and USB port on the laptop
- search for apps on the Play Store that can help with this (didn't find any that actually do the job)
Connecting Android phones to Windows laptops to access their internal memory through USB cable has (bemusingly!) been a problem with this ****ty OS as long as I can remember, so it doesn't surprise me that users are having to spend even more time now to get it to work again.
Any suggestions much appreciated!
Click to expand...
Click to collapse
Hi friend just dial *#0808# choose MTP+ADB click OK and Reboot your device . Try to connect again with usb cable in PC . Good luck
Teddy Lo said:
Hi friend just dial *#0808# choose MTP+ADB click OK and Reboot your device . Try to connect again with usb cable in PC . Good luck
Click to expand...
Click to collapse
Thanks - I tried that, but I still don't see the phone's memory as a USB drive, nor any permission prompt on the phone once I connect it.
longtalker said:
Thanks - I tried that, but I still don't see the phone's memory as a USB drive, nor any permission prompt on the phone once I connect it.
Click to expand...
Click to collapse
Try to reinstall drivers ,uninstall all previously installed use USBDEVIEW tool .
https://www.nirsoft.net/utils/usb_devices_view.html
Before I do that, I should note that, when I tried on a different Win 10 PC, I get the USB drive back no problem, so the problem is Windows/PC-related, it seems?!
Turns out that, when using another USB cable, the phone is once again seen as a USB drive. I didn't think the cable could make a difference! Hope it helps others